#Bilgmon488

[shipservicesid]

Perbaikan Kapal & Kalibrasi :

https://shipservices.id/perbaikan-kapal-dan-kalibrasi/

[searobotic-blog]

15ppm Bilge Alarm type Bilgmon 488

For any type of Inquiry email us at: roboticsea@gmail.com

The 15ppm bilge alarm type BILGMON 488 is type approved to meet the requirements of IMO Resolution MEPC.107(49), and with its small dimensions it is ideal also for retrofit on existing separators. In connection to IOPP certificate renewals, the smart detachable measuring cell with wireless communication is easy to remove and replace with a newly calibrated cell, if this is preferred to having the system accuracy checked on board. On special request the BILGMON 488 is also available as a 5ppm version meeting the requirements of Class notation “Clean Design”.

For more details visit : http://www.searobotic.com/2016/12/bilgmon-488-brannstrom-15ppm-bilge-alarm.html

At Sea Robotic We provide best quality 15ppm Bilge Alarm

BILGMON 488 Specification Versions: When ordering, specify high voltage (115/230V AC) or low voltage (24V AC/DC) version. Measurement: Oil range: 0 – 30 ppm Resolution: 0.1 ppm Accuracy: According to IMO MEPC.107(49) Response time: < 3 sec Alarms: Alarm 1 (valve control) delay: 0-10 sec user adjustable Alarm 2 (annunciation) delay: 0-600 sec user adjustable Alarm points 1 and 2: 1-15 ppm user adjustable Alarm hysteresis: 0.5 ppm (below alarm point) Data storage and retrieval: Calibration storage: Stored in sensor housing IMO required data: Stored in BilgMon488 main housing (sensor housing may be replaced with data remaining on board) IMO required data retrieval: Via LCD display or USB User interface: LCD display: 2x16 alphanumeric display Control: 4 button keypad Input/Output: Current output: 0 – 20 mA or 4 – 20 mA for 0 – 30 ppm Communications: USB serial communication (separate cable and software) Alarm outputs: 115/230 V AC model: 2 x relays (0.25A) 24 V AC/DC model: 2 x relays (1A) Clean water solenoid valve output: 115/230 V AC model: 1 x relay (0.5A, supply voltage) 24 V AC/DC model: 1 x relay (1A, supply voltage) Switch input: 1 x switch input for separator status System and supply: Supply, High voltage version: 1 A, 115 or 230 V AC, 50 – 60 Hz Supply, Low voltage version: 1.5 A, 24 V AC (50 – 60 Hz) or 24 V DC Power consumption electronics: 10 VA Power consumption solenoid: 18 VA

For any type of Inquiry email us at: roboticsea@gmail.com

[shipservicesid]

KALIBRASI OIL CONTENT METER 15 PPM

[shipservicesid]

Services, Supply & Calibration

shipservices.id@gmail.com

[shipservicesid]

Calibation & Repair Services

[shipservicesid]

Repairs and Calibration service

Oil Content Monitor 15PPM Alarm Monitor Circuits

[shipservicesid]

Service of Oil Mist Detectors, Oil Discharge Monitoring, Oil Water Separator

https://www.kalibrasigasdetector.com/2022/01/service-of-oil-mist-detectors-oil

For more info, Please contact us :

Whatsapp          : (+62)817-000-0589

Email                 : shipservices.id@gmail.com

Site                    : Shipservices.id

[shipservicesid]

Repair & Recalibration ODME, Gas Detector and Bilge Monitor 15 ppm 

https://www.kalibrasigasdetector.com/2022/01/repair-recalibration-odme-gas-detector

[shipservicesid]

Troubleshoot of 15 ppm OCM & ODME 

https://www.kalibrasiinstrument.com/2021/12/troubleshoot-of-15-ppm-ocm-odme

[shipservicesid]

Repairs and Recalibration service

OWS 15PPM Alarm Monitor Circuits

For more info, Please contact us :

Whatsapp          : (+62)817-000-0589

Email                 : shipservices.id@gmail.com

Site                    : Shipservices.id

[shipservicesid]

Perbaikan 15ppm bilge alarm

For more info, Please contact us :

Whatsapp           : (+62)817-000-0589

Email                  : shipservices.id@gmail.com

Site                     : Shipservices.id

[shipservicesid]

Ready Stock #15ppmbilgemonitor

Email                : shipservices.id@gmail.com

Site                   : Shipservices.id

[shipservicesid]

Gas Detection Calibration

GAS DETECTORS

We are able to test and calibrate wide range of portable or fixed gas detectors from all makers such as RIKEN KEIKI, DRÄGER, MSA, BW, CROWCON etc. If any parts require replacement we can provide competitive offers for various types of gas detectors such as sensors, filters as well as body covers, battery packs and others. We are able to provide most of mentioned parts ex. stock or with short delivery time

We provide Annual Calibration & Certification Including sales ,services of All types (any make/model) of :

   • Personal & Portable LEL / Oxygen / H2S & CO Single gas detectors.

   • Multi Gas Detector

   • HC/O2 Gas Detector

   • Tank scope Explosivmeter

   • Oxygen Analyzers

   • Fixed Gas Detection System In Pumproom & Accommodation.

https://shipservices.id/