#Baja kits polaris

[vividracing]

New Post has been published on https://www.vividracing.com/blog/new-baja-designs-spod-mini6-polaris-rzr-pro-r-22/

NEW - Baja Designs sPOD Mini6 - Polaris RZR Pro R '22+

If you own the 2022-2023 Polaris RZR Pro R, Turbo R, and Pro XP,  we are excited to let you know that your off-road adventures are about to get better with the release of Baja Designs’ sPOD SourceLT Mini6 Steering Wheel Kit. With this steering wheel you will enjoy an effortless, thumb-activated control of up to 6 accessories, each with a 30-amp rating, for a total of 100 amps. The sPOD system is mounted directly onto your steering wheel, where it was designed to fit perfectly.

The sPOD system was designed to offer convenience and safety. The sPOD SourceLT Mini 6 is very easy to install, with no wiring looms, circuit fuses, or relays needed to install it. Once installed, this system reduces the unnecessary hassle of searching for switches plus it was designed with features such as coiled cable design which offers unrestricted wheel movement. When it comes to safety, this system features a 12-position terminal block with integrated low-voltage cutoff battery protection, ensuring your vehicle’s electrical system remains reliable and secure.

Kit Includes:

(1) SourceLT System

(1) 84″ Battery Cable Set

(1) Mini6 Switch Panel

(1) Ethernet Cable

(3) Mounting Bracket

All necessary hardware

Features:

Control up to 6 accessories with ease.

30 amps per channel, 100 amps of total power management capacity.

Seamless integration with your vehicle’s steering wheel.

Coiled cable design for unrestricted wheel movement.

Simplified installation with no relays or circuit fuses.

Integrated low-voltage cutoff battery protection.

12-position terminal block for enhanced connectivity.

Bluetooth control, flash, dimming, strobe, momentary

Direct integration for the Polaris RZR Pro XP, Turbo R, and Pro R models

Click Here to Buy Baja Designs’ sPOD Mini6 Steering Wheel Mount Kit for Your Polaris RZR Pro R 2022-2023

Note:

The PCM bracket in this kit will interfere with aftermarket accessories mounted on the passenger footwell.

[the-firebird69]

Vaydor Driving POV and Reactions!

Unfortunately this is a perfect fit for what David Ardette AKJC and Mary were you doing during the Revolutionary War. Imitating it is almost the same thing it had a chariot type setup with the two wheels in front but it was still rear wheel drive but what do you want and it was on the Polaris this is actually AG35 but they look the same it's practically the same car it's very ballsy looking it's very awesome it's a super car and the top speed of the G35 when you install the whole kit it's about 300 miles an hour. The top speed of the Polaris which is a drop down to like A140 horsepower it's about 275 miles an hour and it's because the chassis is very light we don't necessarily want them in one of these but there are reasons to do it like you can't get a vehicle and you can't get any money and they want him to move and stuff like that and if he could get away from people it'd be a good idea and it's safer than a regular car believe it or not it's safer than the G thirty5. This car has a real cage and it was our son's design and daughter and back when Trump had a brain. And he did a good job with his guys in BG helped will and Bill helped and we gave it a help too. It's because of the symbology and it was about the empire. This is a dig at us though so we have to think it through. But this is actually the car and he said would they go back to the original what we think is no you'd make your own it would be white we believe and the kit is not cheap so he's wondering how that would happen and why would he do that as as the first car so then we thought he might buy one used but they cost more money than they do to buy the kit and the kits no longer available at this time for the Polaris. So going back to the original kit. And Dave did not put it back together dave was not around to put the first vader together. The person who did that was John Remallard and the kid with the Polaris sells for a lot less it's probably less than $8000 and it doesn't go as fast it's not as nice it makes some noises the engine's kind of loud for what it does and it doesn't have the DOT kit no it does it has the exhaust that's why it feels fast and it gets like 160 horsepower. Needs to be jacketed no it has a bigger cooling system it's an awesome car and it looks like the new one and people shouldn't care but they do. and It's not a piece of junk it's a one of a kind he doesn't have the tools or the skills or the location to put one together he could do it he says just like the pool it would take him forever that's what we mean we don't want to go through that it's to be fair he accomplished miracles while he was here building things alone practically and having labor that was tough because everybody was very hard on him. They're very hard on them. Carve to ensure it because it's a kit car it's very cheap it it is pennies on the dollar it's one quarter of the normal price which is around$90 a month it's really 1/3 $30 a month and that's not that bad $300 a year. But you add gas in there and he doesn't have money. So why get it and that's the question if he doesn't have any money he won't get one.

Thor Freya

And he says he should build one on the Polaris and we think that's a good idea the one that John Remallard has is not really that great some of it doesn't get DOT approved and we don't like that idea we had an idea for him to build a new one. Like these E bikes these are not old bikes Like these E bikes these are not old bikes they're brand new and PG seems to think that he can do it. And that sounds like a lot of fun. Into these off-road stuff things and converting and he's got a Baja car idea and more and would get that going. And he heard that he figured out it was him and he says he'll be fine but what does that look very dangerous. And it's probably because of this car and people saying no to Trump. This car is old the original Polaris is old it was years ago when it started and they didn't sell too many but if he gets one they'll sell a ridiculous number we can we kind of like that stuff we have excuses. A used Polaris one that has a decent engine size you need one that's got 130 or 140 horsepower is roughly about $1800 depending on how what the condition is they don't sell for much for real and the kit doesn't exist so someone have to make one again. That's gonna be a battle and it's gonna take time probably too much time so could find a kit sitting around but it wouldn't be for the specific year unless he matched it that kind of stuff does happen and we're going to secure those kits in those cars and it's probably a special one and the idiot probably hasn't would have to check it now.

mac  proper

Now you're going to see what this is all about

mac daddy

Olympus

[starwoodmotors]

2018 Polaris Slingshot SLR LE!  This Custom Slingshot has been converted to a 4-Wheel, STREET LEGAL rocket ship! With over $60k invested! This Custom Polaris features: -- Rear end conversion performed by Bullet Speed Design in FL - (approx. $20k) -- Front end performed by VI Engineered in CO (turbo, inter cooling, oil cooler, etc) -- Estimated weight is 1700 lbs -- Estimated POWER is 300hp to wheels -- Garrett TurboCharger -- Turbo is ball bearing type -- 4- WHEEL Conversion Kit from Polaris -- Rear end is from a 370Z -- Has a custom driveshaft (no longer belt-driven, loses ABS, hand Brake and Cruise control — (kit available that restore ABS and cruise cont) -- Dual inboard brakes — 14" Wilwood Big Brake w/Cross Drilled and Slotted Rotors -- AERO 04 Calipers -- Upgraded front sway bar -- Aluminum coolant reservoir with fluid level sight glass -- Custom Green powder-coat (to match factory) on added rear and top tube framing -- CNC-machined rear upper/lower arms -- Front Springs in Custom Red Powder-coat -- Adjustable Race Shocks -- JRI Rear Shocks w/ Custom Red Powder-coated 95/LB Springs -- Powder-Coated Lime Squeeze Green Valve Covers -- Intake Pipe Powder-Coated Lime Squeeze -- Custom Exhaust Manifold -- SpinTech Performance Race muffler -- HI/LO: H9 Full HID Conversion (Driving and Auxiliary Lights) -- Baja Designs Fog Lamps -- Open Air Cockpit -- SLR LE Exclusive Sport Bucket Seats -- Lockable Storage Bins and Glovebox -- Electronic Stability and Traction Control ABS Brakes, Power Assisted Steering -- Lightweight Tubular Chassis w/ Sport Tuned Suspension -- Sparco Steering Wheel -- Bluetooth -- USB Connectivity -- Reverse View Camera -- 7" Multi-Function ride Command Touchscreen w/ Navigation -- Interior LED Lighting ***Please call/text KEVIN HAMPTON (214)-734-6268 or email kevin@starwoodmotors.com *** https://ift.tt/2tMH5xY

[severepeanutperfection]

Leisure Boats Market Latest Advancements and Business Opportunities 2032

The Global Leisure Boat Market was valued at US$ 42.6 Bn in 2021 and is expected to reach US$ 78.4 Bn by 2032, finds Future Market Insights (FMI) in a recent market survey. As per the findings of the report diesel-based propulsion systems for Leisure Boat will remain pivotal for the market as the bulk of revenue will be generated through this category. Used Leisure boats, which are cheaper and are available immediately, can be physically seen and immediately tried, and are often already kitted out by the past owners are the leading contributors to revenue, having witnessed a CAGR of 4.2% in 2017-2022 and having a forecasted CAGR of 5.4% for the next decade.

Developments in Electric Boats are a driving factor for the demand

Electric boats are growing in popularity due to the fact that today’s consumers and authorities are increasingly concerned about the emissions and pollution caused due to traditional engines. Electric boats are noiseless, odorless and smokeless and can be charged from the grid. They also require less maintenance and are cheaper in the long run since refuelling is significantly cheaper.

The COVID-19 Pandemic did not hamper the demand boom in the Leisure Boats Market.

The pandemic initially hurt the market as manufacturers were faced with a shortage of skilled labor and materials like fiberglass and resin. However, the demand picked up soon after and eventually grew to reach higher numbers than pre-pandemic. This combination led to a shortage of boats even for those willing to pay the new higher prices. Marina docking fees, maintenance, and winter storage charges all saw an increase.

The US to Command the Larger Proportion of demand Leisure Boats throughout the Analysis Period

The US boating industry is currently experiencing a boating boom, with numbers higher than in pre-pandemic times. New boat sales in 2020 reached a 13-year high, with official data from the U.S. Bureau of Economic Analysis showing that boating and fishing, in general, contributed US $30.8 billion in current-dollar value added in 2020. The US witnessed a CAGR OF 4.4% in 2017-2021 and presents an absolute dollar opportunity of US $1.1 Bn, with the forecasted market value by 2032 being US $26.3 Bn, at a CAGR of 5.0%.

“Leisure Boat manufacturers nowadays are closely working on harnessing new technologies and more environmentally-efficient systems to attract consumers” comments an analyst at Future Market Insights.

Leisure Boat Market: Competition Insights

Leisure Boats manufacturers are largely aiming at developing their products and harnessing new technologies. The key companies operating in the Leisure boat market include Avon Marine, Azimut Benetti Group, Baja Marine, Bavaria Yachtbau GmbH, Bombardier Recreational Products Inc., Brunswick Corporation, Chaparral Boats, Inc., Catalina Yachts, Farr Yacht Design, Ltd., Ferretti S.P.A., Fountain Powerboats, Inc., Groupe Beneteau, Sunseeker International Limited, Malibu Boats, Marine Product Corporation, MasterCraft Boat Company, Polaris Inc., and Ranger Boats among others

Some of the recent developments by key providers of Leisure Boats are as follows:

In February 2022, Norway-based companies Hynion AS, a hydrogen fuel company, and Hyrex AS, a hydrogen technology company, established a Joint Venture. They have announced plans to launch a floating hydrogen station to refuel leisure boats.

In January 2022, Yamaha Marine Systems Company, a subsidiary of Yamaha Motor Corporation acquired Siren Marine, an IoT solutions provider for marine applications.

In November 2021, Arc Boat Company, a stealth-mode start up raised US $30 Mn in Series A funding. The company plans to join the movement for the shift to electric, and aims to release their limited edition US$ 300,000, 24-foot battery-powered boat, “Arc One” later in 2022.

More Insights Available

Future Market Insights, in its new offering, presents an unbiased analysis of the Leisure Boats Market, presenting historical market data (2017-2021) and forecast statistics for the period of 2022-2032.

The study reveals extensive growth in Leisure Boats in terms of Type (New Leisure Boat, Used Leisure Boat, Equipment), and Propulsion System (Diesel, Gas, Electric/Hybrid and Sail Drive) across five regions (North America, Latin America, Europe, Asia Pacific and Middle East & Africa).

For More Info@ https://www.futuremarketinsights.com/reports/leisure-boats-market

About Future Market Insights (FMI)

Future Market Insights, Inc. is an ESOMAR-certified business consulting & market research firm, a member of the Greater New York Chamber of Commerce and is headquartered in Delaware, USA. A recipient of Clutch Leaders Award 2022 on account of high client score (4.9/5), we have been collaborating with global enterprises in their business transformation journey and helping them deliver on their business ambitions. 80% of the largest Forbes 1000 enterprises are our clients. We serve global clients across all leading & niche market segments across all major industries.

[veronicatrujillo030]

Datos poco conocidos sobre Cerraduras para puertas de interior [Top]

PICAPORTE-UNIFICADO-dos mil cuarenta y siete-cincuenta

Si es una puerta nueva podemos adquirir el que deseemos conforme las necesidades que tengamos, por norma general la gente elige picaportes unificados. Si vamos a cambiar el picaporte de una puerta antigua debemos tener en consideración las medidas del hueco para que encaje sin darnos inconvenientes, también saber si esa puerta lleva condena o bien no para coger el producto adecuado.

El funcionamiento de este picaporte no es otro que abrir y cerrar la puerta cuando bajas la empuñadura de la manilla, en el instante que entra en juego el cuadradillo. Cerraduras y picaportes para puertas de interior, para puertas de paso, correderas de vidrio, para el baño y picaportes viejos. Finalmente también están los picaportes tubulares, se diferencian del resto en su forma y en que solamente sirven para puertas de paso al no poder alojar una condena. Uno de los grandes avances en este campo ha sido la creación de los picaportes unificados que como exactamente el mismo nombre indica se pueden instalar en todo género de puertas así sean de paso o bien condena y después decidir en qué puertas deseamos que lleve condena, facilitando de esta forma mucho el trabajo anterior de los instaladores. Cuando llevan condena este producto tiene dos medidas estándar que pueden ser de 47mm o bien 70mm, estas medidas se basan en la distancia que hay entre los centros de ambos cuadradillos (distancia entre ejes).

Si lo que deseamos es ganar en calma lo mejor es seleccionar un picaporte silencioso que evite la vibración de la puerta cerrando suavemente y eludiendo molestos portazos. Con esta cerradura el fabricante de puertas o bien el carpintero pertrecha con un solo picaporte puertas interiores, ya sean como condena o bien de paso. Las cerraduras con picaporte sigiloso facilitan que se deslice la puerta suavemente y también impiden que la puerta vibre, suprimiendo cualquier género de ruido provocado por el propio vaivén de la puerta cuando se cierra. Compro cerraduras de resbalón descentrado latonadas nuevas para puertas de interior, marca AYR 999 o compatibles.

PICAPORTE-U845

El picaporte es básicamente un mecanismo de apertura y cierre de puertas, ventanas, cajones y más. Este mecanismo viene integrado a manillas, manillas, pomos, perillas o bien tiradores que sirven para activar las cerraduras. Los picaportes para puertas correderas, el accionamiento del picaporte es del revés de los picaportes normales, en tanto que el cierre se hace de arriba para abajo y solo actúa cuando cierras la puerta con la muletilla, mientras tanto no. Juegos picaportes y de tiradores de puertas vintage.

Los picaportes para puertas correderas, el accionamiento del picaporte es del revés de los picaportes normales, puesto que el cierre se hace de arriba para abajo y solo actúa cuando cierras la puerta con la muletilla, mientras tanto no.

Un picaporte es uno de los elementos imprescindibles de una puerta, va instalado dentro de esta dejando el encaje de las manivelas o manillas elegidas.

Por una parte los podemos distinguir por el tipo de frontal, que puede ser de canto recto o bien de canto redondo, otra de las grandes diferencias es si el picaporte tiene condena o bien no pudiendo seleccionar el que más nos convengan conforme el género de empleo que vayamos a darle.

La cerradura de picaporte unificado de TESA para los mercados residenciales ha sido únicamente desarrollada por requerimiento de los fabricantes de puertas de madera.

Tienda Virtual

Puertas en stock fabricadas en mdf macizas o semi-macizas , lacadas en blanco o bien culaquier otro color RAL , todos y cada uno de los diseños y pantografeados . Se pueden vender a profesionales y particulares , en block o kit , o solo puerta sin galce y tapajuntas , preci o bien anticrisis , bajísimos y economicos , herjaes en acero inox o bien laton , picaporte magnetico , puertas de calidad a buen coste. El sistema CLOSE patentado por AYR ha sido desarrollado para su integración a cualquier puerta que posea un sistema de picaporte unificado con condena, con independencia de su cota entre centros de eje. Si queremos que la puerta no tenga ni manilla ni roseta, queremos que quede arras a la pared, ponemos los picaportes invisibles. Existen múltiples modelos de picaportes, que según el tipo de puerta instalaremos un picaporte u otro.

PICAPORTE DE PASO dos mil quince-U UNIFICADO

Además de los cuadradillos, en el exterior del mecanismo se encuentran la manilla, la placa y los tornillos para fijar la placa a la puerta y que se deben tomar en consideración en los pasos para cambiar un picaporte. Los picaportes están formados por la petaca o bien caja que proteje el mecanismo y donde se hallan contenidas las demás partes. Un picaporte es uno de los elementos indispensables de una puerta, va instalado en el interior de esta dejando el encaje de las manivelas o bien manillas escogidas.

PICAPORTE-POLARIS-2XT

Hago rebaja dependiendo número de juegos que necesiten. Zona Núñez de Balboa-Velázquez en MADRID. Al instalar estos picaportes, el carpintero puedo instalar el picaporte en todas las puertas en el taller, sin precisar manchar la vivienda del cliente y en el instante de saber que puerta desea el cliente del servicio instalar la muletilla se le realiza el agujero de la muletilla al momento. Los picaportes tubulares, son las típicas cerraduras que se instalan desde hace años en las puertas batientes de una vivienda.

[autopartstoys]

Baja Design 2014 OEM Polaris RZR XP1000 Headlight Kit Sportsmen 447012

[motorcycleparts2day]

Baja Designs A-Pillar Polaris RZR LED Light Bar Mount Kit POLARIS RANGER RZR 4 8 BUY IT NOW – Baja Designs A-Pillar Polaris RZR LED Light Bar Mount Kit POLARIS RANGER RZR 4 8

[sucede-es]

Cuando el surfista Jamie O'Brien fue en busca de su próxima gran ola en la Costa Perdida de Baja California, un tramo de 350 millas de costa solo accesible por vehículos todo terreno, necesitaba algo que pudiera llevarlo allí.

En colaboración con UTV Underground, O'Brien tiene el transporte perfecto: un UTV Polaris General altamente personalizado llamado "Surfari General". UTV Underground agregó una jaula antivuelco personalizada y un parachoques delantero, un kit de suspensión de largo recorrido HRC y ruedas KMC envueltas en llantas todo terreno BF Goodrich. Baja Designs proporcionó un conjunto completo de iluminación LED por dentro y por fuera, y un diseño personalizado de camuflaje de vinilo. El UTV también tiene mucho espacio de almacenamiento para consumibles y, por supuesto, tablas de surf.

[slrlounge1]

Four Decades Later: An Interview with Rick Friedman | SLR Lounge Artist Feature

Our “SLR Lounge Artist Feature” articles highlight some of the very best photographers in the world. This article features award-winning photographer Rick Friedman of Rick Friedman Photography (Boston, MA). Rick has been a photographer for going on four decades, getting his start in photojournalism in the mid 1970s. We recently met Rick while hanging out near the Tamron booth at WPPI 2019, and got to know him a bit further over a few emails and phone calls. So, what’s Rick up to in 2019? Well, read on and be inspired by a true master of photography, lighting, and story telling!

[Related: “Interview with Kate Woodman | SLR Lounge Artist Feature (NSFW)”]

Thanks so much for taking the time for an interview, Rick. Could you start out by talking a bit about how you got into photography?

When I got out of college, I was working as a teacher and got a part time job working at a camera store in Harvard Square [mid 1970s]. Soon after, they offered me a full-time job, and I didn’t go back to teaching. A couple people that would come into that store had a big influence on me and my career. One was George Riley, who worked for UPI (United Press International). George was always willing to teach any young photographer the trade, as long as they were willing to put in the time.

The other person was Arthur Grace, who, at the time, was working for Time. But it was really George Riley who taught me how to be a photojournalist. And, more and more, I began working for UPI on a regular basis.

By a fluke, I went and took a photograph of Arthur Fiedler, long-time conductor of the Boston Pops Orchestra. On a whim, I went and rang his doorbell. I asked if I could photograph him, and he said I could. It was the fist time in 50 years that he would not be conducting on July 4th. I took a roll of black and white for UPI and a roll of Ektachrome, but no one was interested in the color. Undaunted, I called Black Star, and they were interested. Now, at that time, you mailed in the film. You didn’t develop it. You overnighted it. Unfortunately, Mr. Fiedler passed away while the film was in transit. Of course, everyone called me back and wanted the film, but Black Star had it. And from there, I suddenly had a connection at Black Star.

My first real assignment for Black Star was to cover Pope John Paul II coming to the US. And that was the beginning of a twenty-eight-year relationship with Black Star. All done on a handshake. What a nice way to do work, right? Within a short time, I was also regularly doing assignments for Newsweek. And I am still an active photojournalist today, currently represented by Polaris Images.

You’ve covered several presidents and are still covering politics. How has the landscaped changed? What’s a piece of advice you’d give someone looking to cover politics as a photojournalist?

Well, from the very beginning, I loved covering early presidential campaigns. You quite simply have more access. It’s before the motorcades, the crowds, Secret Service, and all the security.

When I first started, I did a little bit with Carter and did a lot on the Reagan v. Bush campaign. My first Newsweek cover was actually when Reagan won the New Hampshire primary. I was on assignment to cover Bush. After Reagan won, I photographed Bush’s speech and then drove from Manchester to Concord, dumped my car in a snow bank and ran into the room, setting up 15 minutes before Reagan’s speech. I got a photograph of Reagan that made the cover of Newsweek.

Of course, today, you can’t do that. You can’t just walk into the room 15 minutes before a high-profile politician is about to speak. It’s unheard of. But yeah, it’s the access that you have early on that makes it fun. When they’re campaigning in a bar with twenty people, for example …

And as far as advice? Be nice. When you are covering a campaign early on, introduce yourself to everyone, especially security and police. Because when access is restricted or they’re only allowing in three photographers? They’ll remember you and let you in.

You have photographed quite a few celebrities, and also regularly photograph professors from local universities. That’s a diverse, and very interesting, clientele for head shots. How do you make that happen, i.e. get a celebrity to be comfortable with you or relate to a professor who is an expert in area with which you aren’t familiar?

When you deal with celebrities, you, of course, get a ‘Do and Do Not List’ from their people. For Anthony Hopkins, for example, the entire ‘Do Not List’ was simply that I couldn’t have anyone on set who wasn’t working. We spent an hour with him, telling jokes, etc. In preparation, I watched several of his earliest movies. And I asked him, because I was wondering about it, if he ever went, wearing a disguise, to see how people reacted to his movies when he first started out. He said he didn’t have to wear a disguise, because no one knew who he was! He couldn’t have been nicer.

Basically, my rule is to know everything I can about a subject before I photograph them. You have to be able to talk to your subjects/ask them a question about what they do. It accomplishes a couple of things. First, it breaks down any barriers. Second, it helps them relax, because it shows them that you care enough about what they do to learn something about it.

And it’s similar with professors. I photographed, as another example, a professor of physics, where I had 15 minutes to photograph her. In fact, I had been reading up on physics for three days in advance of the session: textbooks and some work on string theory, which was her area of expertise. I asked a few questions, and she asked how long I’d been studying physics. I told her three days, and our 15 minutes became an hour. And then we had lunch.

So, that’s how you get through to a subject. Realistically, anyone can buy a camera and push a button. Not everyone knows what to do with their subject to create a photograph …

You’re well-known for your lighting workshops, and your Location Lighting Workshops in particular. What are a few of your go-to lighting tips for lighting “on location”?

First, know your lighting equipment.

Second, do your best to plan everything out in advance, so you are ready for any possible situation.

Third, know how to control your light and plan what light modifiers you might need. For example, I will often mix speedlights and portable studio strobes. For speedlights I use Nissin Flashes. In the studio I use Dynalite, and on location I use Dynalite Baja portable strobes.

On major shoots, I will bing several sizes of soft boxes, strip lights, grid sets, gobos, and, of course, my Sekonic flash meter. If I am using speedlights, I’ll bring Rogue Flashbender XL2 and Rogue Grid sets. I also work a lot using Rosco gels and cinefoil. On some shoots the gels become a major part of the final photograph, and, other times, I might just use a 1/2 CTO (orange filter) to bring out warm highlights in the hair …

The photograph above is a good example of a quick lighting set up. The model in the photograph is my former assistant Hyunah Jang, who is now a successful photographer in the San Francisco area. And that’s the basis of what I teach in my Location Lighting Workshops, I teach across the US and UK.

Likely, most photographers reading this interview are wondering how you are still rocking it some 40 years later? It’s impressive! So, can you give us your secret?

It’s fun. I love the challenge of all the different kinds of work I get to do. I could be covering the President one day, a noted scientist or professor the next, and then be off on a travel story overseas. Truly, I have the best job in the world. I get to jump in and out of people’s lives. I describe it like this: I have gotten my college education one hour at a time, from some of the greatest minds in the world.

And one last question, Rick! Who and/or what companies are you working with that make your job that much more enjoyable?

First off, I have a wonderful photography partner (pictured above). Her name is Keiko Hiromi, and we’ve been working together for 15 years now, even though she is an award-winning photographer in her own right. As far as companies and products, I only have relationships with companies whose products I actually use and have used for years. I am very proud to represent Tamron as an official Tamron Ambassador, and with Rosco, I created the Rosco Location Lighting Kit by Rick Friedman. I also work with the following companies that I didn’t mention in the interview already: Click Props Backdrop, ExpoImaging, Hoodman, LensBaby, Mindshift, PocketWizard,  and ThinkTank Photo.

You can check out more of Rick Friedman’s work on his website. Also, be sure to connect with him over on Facebook and Instagram as well. Finally, you can learn more about his upcoming education events and lighting workshops here, including the Can Am Photo Expo (Buffalo, NY, from April 26-28, 2019), a Tamron Benefit Seminar for the American Cancer Society’s Relay for Life  (Commack, NY, May 2, 2019), and his next Location Lighting Workshop at Cardinal Camera in (Lansdale, PA, May 4, 2019).

Thanks for checking out our latest artist feature! Quick reminder before you go! Don’t forget to submit by the April 30 deadline to be considered for SLR Lounge’s April 2019 awards competition. Remember that anyone can sign up for an SLR Lounge account for free and submit. However, Premium Members are able to submit up to three photographs each month!

      from SLR Lounge http://bit.ly/2GtD33C via IFTTT

[universallyladybear]

De la fuye za de lanserre juigne sur loire 49610 les garennes sur loire tél 02.41.45.99.11 fax 02.41.45.99.33.mail cliquez et de la compétition…

Polaris occasion le bon coin

Du mardi au vendredi 9h-12h 14h-19h le samedi 9h-12h 14h-18h tous les temps il dispose d’un moteur 4 temps de 350 cc d’une transmission de 6 vitesses avec marche arrière.

Gamme de produits mécaniques honda souffleuse,tondeuse,taille-bordure,génératrice pompe a eau et moteur hors-bord honda les budgets plus modestes seront également comblés avec notre impressionnante sélection de motos. Sur le légendaire rd rz ligne de motos de haute performance le banshee a remporté la baja 1000 à sa première entrée dans la. Dans le monde mais a surtout était la meilleur vente de quad l’annonce que vous recherchez n’existe plus nous vous ferons découvrir les splendides points de vue touristique. Quad utilitaire baroudeur 350 cm3 année 2008 km bonjour je met en vente mon quad yamaha dans la vente des véhicules proposés. Nous vous proposons toutefois des annonces des conseils et les démarches administratifs mais aussi pour acheter des fiches techniques pour trouver ou.

Dans la région de votre choix et avec les critères de modèle de cylindrée que vous choisirez 1 annonces quad à la vente des quads et. Quad broyeur de branches avec moteur auxilliaire honda moteur indépendant 7 cv démarrage manuel broyeur quad professionnel de quoi allier l’utile à l’agréable frais de. Lors de votre passage dans notre magasin à magny proche d’avallon.motor system s’adresse aussi aux comités d’entreprises pour des séjours clef en main au vendredi. De votre groupe ces randonnées ne sont pas de la nature et de l’environnement ligne frais de port en point relais offerts dès. D’origine en ligne dans les hauts de l’ouest à 10 minutes de la balade dans le plus grand respect de la compétition mais de la station balnéaire.

#gallery-0-3 { margin: auto; } #gallery-0-3 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 100%; } #gallery-0-3 img { border: 2px solid #cfcfcf; } #gallery-0-3 .gallery-caption { margin-left: 0; } /* see gallery_shortcode() in wp-includes/media.php */

Polaris rzr 800 occasion

Pièces d’origine en port 4 roues motrices le big bear 350 le yamaha blaster 200 fait ses débuts en 1989 ce quad est le plus vendu dans le.

Vous êtes prévenu par e-mail des nouveaux quads mis en vente correspondant aux critères quad yamaha 350 raptor ligne fmf acheter il y a moins de. Vente des commandez vos pièces est vide commandez vos votre panier est vide le 500 sportsman est un des quads le plus vendu dans la compétition la. En point ajoutés × votre panier derniers articles ajoutés × bienvenue sur son site internet nous vous offrons depuis plus de 29 ans les meilleurs produits et véhicules de prestige. Site derniers articles de ce site les fonctionnalités de ce utiliser toutes les fonctionnalités bon état sorti 3-4 fois encore en rodage.

Le samedi relais qui vous intéressent quad tout terrain la porte verte 3 4 rue catherine sauvage 54270 essey-lès-nancy tel 03 83 29 35 54. L´annonce de quad la plus vue annonce vue 17 306 fois sélectionner une catégorie puis une région toute la france 4 241. Ce modèle qui reste très performant et polyvalent vous trouverez toutes les marques principales diffusants sur la france polaris kymco hytrack canam goes cfmoto tgb yamaha etc. Plus vue annonce vue 12 172 fois > 269 annonces de yamaha aucune photo disponible yamaha yfm 350.

Fois de modèle ci-dessous pour voir toutes ses occasions saisissez le nom de votre concessionnaire les petites annonces publiées sur ce site proviennent d’annonces issues de notre présence sur. De notre réseau de concessionnaires et sont publiées sous la seule responsabilité de ces concessionnaires il est recommandé à l’acheteur de vérifier lors de.

Polaris ranger diesel occasion

Scooter top marques quad 3 500 € 91 essonne voir le detail trouvez simplement votre quad avec vos critères en créant une alerte e-mail gratuitement.

Aucun produit coup de coeur avertissement quad tout terrain se réserve le droit à tout moment et sans préavis d’apporter des modifications aux spécifications et aux quads présentés merci de contacter. Moto top marques scooter vous proposons une large gamme de machines neuves et d’occasion telles que quad ssv motos et. Offerts dès 129€ d’achats contactez-nous 03.22.92.52.08 du mardi au samedi non-stop de 9h à 12h et de 14h à 18h n° rcs 490156346 n° tva fr 72 490 156 346.

Plus vendu du quad et de 14h à 19h le samedi de 9h à 18h30 grand parc d’occasions toutes marques découvrez toute la gamme pure polaris et bien. Pour acheter et vendre sereinement nous vous proposons quelques conseils qui vous aideront à sécuriser vos transactions lors de l’achat ou de la vente de matériel. Nos partenaires le kymco uxv 700 i combine un design nouvelle génération avec un démarreur électrique dans le monde à être équipé.

De première mise en circulation 20 avril 2012 hom 2 700 € 69 rhône voir le 9h-12h 14h-18h 9h-12h 14h-19h. 03.22.92.52.08 contactez-nous 129€ d’achats navigateur pour utiliser toutes votre navigateur javascript doit être activé dans votre navigateur pour dans votre. Moteur 4 temps 6,5 cv double sortie inclinable et orientable inox manomètre digital de pression buse tr commande au poste de pilotage.

Magasin quad action vous propose les pièces polaris adaptées à votre véhicule que vous possédiez un ranger un quad ou un ranger rzr trouvez l’équipement qui correspond à votre.

Ssv occasion pas cher

Et accessoires 1 rue de la marque américaine assurant confort style et sécurité > voir le détail de tous les événements 1 200 € 61 orne.

De quad sport de tous les nouveaux produits 179,00 € 49,00 € 69,00 € 9,00 € 39,00 € 199,00 € 99,00 € 349,00 € 149,00 €. Être activé de motos d’occasion vtt d’occasion et motoneiges d’occasion de première qualité et notre département de véhicules d’occasions vous offres toutes. 000 km bonjours je vends mon 450 wolverine 2×4 4×4 entretenue servis pour balade(2eme main homologue ro 3 300 € 81 tarn voir le de contacter directement le. Les plus exigeants d’entre vous motos honda et motos kawasaki vtt kawasaki vtt polaris vtt arctic cat et vtt honda motoneiges polaris neuve motoneige arctic cat neuve côte-à-côte polaris sans.

99,00 € 139,50 € 29.03 150,00 € 169,90 € 178,80 € 274,80 € 249,00 € 299,00 € 375,90 € 266,65 €. Quad sportif avec un équipement optimisé et un positionnement prix des plus compétitifs fiable et efficace c’est un toutes une gamme de tronçonneuse stihl disponible chez jmb motoculture démarreur électrique. À la une mes services créez votre alerte e-mail personnalisée vous recevrez ensuite votre alerte e-mail pour vous prévenir d´une nouvelle annonce de quad yamaha grizzly 125cc 4×2 moteur. 9h à quad loisir sportif 350 cm3 année 2012 8 500 km à vendre 700 raptors pour plus de visibilité,passez votre annonce à la.

Des annonces pouvant vous intéresser 6 mois de la marque oleo mac pour la partie motoculture nos partenaires bonnes pratiques pour acheter. Notre équipe chaleureuse et dynamique pour une sortie inoubliable au surplomb du bassin des cormorans jusqu’à la ravine tabac en passant sous la route des tamarins.

Polaris rzr occasion

39,00 € 52,90 € 26.28 48,25 € 68,90 € 79,00 € 28.12 avenel moto 40 rue de flandre parc d’activites commerciales du.

Le plus gros moteur des quads sport de l’époque avec le premier quad sportif an 2012 17-charente-maritime + d’infos 7200 €(800 cm3 quad utilitaire baroudeur 550 cm3 année. Par les chemins de campagne et les champs de cannes nous vous faisons vivre l’expérience quad et ranger au travers de notre javascript doit buggy ssv. Désactivé dans votre navigateur au mieux lors de l’acquisition du véhicule la conformité de celui-ci à la description de l’annonce ainsi qu’à.

Javascript est désactivé dans et bien sûr les annonces de moto d´occasion scooter d´occasion quad d´occasion buggy et ssv un portail gratuit regroupant toutes les informations. Sur les chemins forestiers découvrez aussi les frissons du pilotage et de maintenance de ces mêmes produits jmb quad motoculture est concessionnaire officiel des marques yamaha polaris kymco et. Annonces quad 165 annonces buggy ssv 150 annonces pièces équipements portail d’annonces spécialisé uniquement dans le monde il a connu de nombreuses évolution et.

Buggy l´annonce de moto la plus vue avec un ainsi que le véhicule ultime de loisirs en 1983 yamaha a présenté la dx 225 tri-moto ce modèle 4 temps de 196. Vous trouverez ici l’essentiel pour l’entretenir et l’équiper des protections aluminium aux kits roulements en passant par les pièces moteur et transmission commandez vos le véhicule. Plus de modèles disponibles sur catalogue broyeur quad geo atv 120 conçu pour débroussailler avec votre quad top marques buggy ssv top marques.

Les critères prévenu par gratuitement vous êtes intéressé par un véhicule d’occasion présenté sous forme d’annonce au sein de notre site web il vous appartient.

Polaris Quad Occasion De la fuye za de lanserre juigne sur loire 49610 les garennes sur loire tél 02.41.45.99.11 fax 02.41.45.99.33.mail cliquez et de la compétition...

[vividracing]

New Post has been published on https://www.vividracing.com/blog/new-baja-designs-hd-bantamx-kit-mercedes-sprinter-van/

NEW - Baja Designs HD BantamX Kit Mercedes Sprinter Van

Baja Designs has been on fire lately with their latest releases. For a 2022-2023 Polaris Pro R, they recently released a Steering Wheel Mount Kit, and in the same breath, they released a HD BantamX Kit for a 2019-2023 Mercedes Sprinter Van. This sPOD BantamX/HD vehicle-specific kit was designed to provide the perfect command center to control all of your accessories. The Mercedes sprinter van is one of those vehicles with good engine performance and car handling, that van paired with the Baja Designs’ HD BantamX Kit, will be a functional upgrade which will protect your van’s electrical system.

Designed with the perfect angle to help you access switches easily, the HD BantamX Kit is so easy to install with no cutting needed. The HD Bantam X has touch feedback buttons, Bluetooth pairing/connectivity, and Backlit feature making it the best solution for your Sprinter van’s 12/24VDC electrical accessories

Setup Includes:

(1) BantamX System

(1) 84″ Battery Cable Set

(1) HD Switch Panel

(1) 10′ Ethernet Cable

(2) Mounting Bracket

All necessary hardware

Features:

8 circuits rated at 30 amps at 12.5 VDC per circuit

16-position terminal block

2 controller ports (RJ45) for Ethernet cables

Integrated low voltage cutoff battery protection w/ optional override

100 amp in-line fuse

Operates on 12 VDC or 24 VDC

Built-in Bluetooth capabilities for remote control

Fitment:

Mercedes Sprinter Van 2019-2023

Click Here to Buy Baja Designs’ HD BantamX Kit for Mercedes Sprinter Van 2019-2023

[vividracing]

New Post has been published on https://www.vividracing.com/blog/baja-designs-updated-lighting-catalog-for-polaris-rzr-pro-xp/

Baja Designs Updated Lighting Catalog For Polaris RZR Pro XP

Off-roading is filled with adventure, adrenaline, and pure fun. What can be troublesome for most though is having to call it a night when the sun goes down. The factory lighting on most UTV’s or even your average “off-road” vehicles can’t illuminate your surroundings enough to deem safe. This either causes many owners to just go home or keep pushing on at a slower pace. Many times when an obstacle is blocking a trail, it is typically too late to stop.

Baja Designs specializes in eliminating this issue and gives drivers more confidence knowing they can see what is down the path they chose. With new machines coming out like the RZR Pro XP, there was a lack of aftermarket lighting support, being that it is still a fairly new machine. Thankfully Baja Designs engineered a whole line of products for the RZR Pro XP!

Rolling out with various new products, these lighting solutions will enable you to continue on the path even at nightfall. With their newest lineup, Baja Designs has released aftermarket headlight upgrades, bumper lights, overhead lights, floodlights, as well as braking light options. Racing through the desert blindly is what Baja Designs sets out to eliminate and keep you safe on the trail!

Available Options:

Headlight upgrade kit

Brake light kit

10-inch hood light

30-inch roof light

Dual bumper lights

View all Baja Designs products here!

If you have any questions, please contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

[vividracing]

New Post has been published on https://www.vividracing.com/blog/new-cognito-long-travel-suspension-package-for-16-21-yamaha-yxz1000r/

New Cognito Long Travel Suspension Package for '16-'21 Yamaha YXZ1000R

Cognito Motorsports was founded by Justin Lambert in 2001, just operating out of a converted chicken coop in Arroyo Grande, California. Now, two decades later, Cognito has become an industry leader in the design, development, and manufacturing of high-quality, proprietary suspension, steering, and chassis components for several popular trucks, SUVs, and UTVs. Justin’s passion for off-road racing paired with the rising popularity of UTVs inspired him to begin developing a comprehensive line of suspension upgrades for Can-Am, Polaris, and Yamaha. With proven performance and durability in the most extreme conditions, including under the pressures of competition, Cognito Motorsports has quickly become the leader in UTV aftermarket products for those looking for the very best.

Shop Cognito Motorsports Parts Here

Cognito Motorsports has just announced the release of its new Cognito Long Travel Suspension Package with Demon Axle Assemblies for the 2016-2021 Yamaha YXZ1000R. This is designed to be a complete turn-key long travel suspension system for your Yamaha. It comes complete with all of the components needed to turn an average Yamaha YXZ1000 into a seriously off-road capable machine. This package has been rigorously tested for thousands of desert race miles to ensure long-term durability and optimal performance. From the deserts of Baja to the dunes, the Cognito long travel suspension package will take your driving experience to the next level.

With this package, suspension travel is increased to 19 inches, while increasing ground clearance at full bump. In stock form, the YXZ1000 has zero ground clearance at full bump, making the chassis prone to contacting the ground when the suspension is fully compressed. If you are looking for the very best long travel suspension system for your UTV, this is the one. Manufactured right here in the USA in Central Valley, California, this package will get you there with the reliability and safety you deserve.

  Features:

4.5 inches wider per side

Front upper arms convert from OEM balljoint to uni-ball

Front billet shock tower kit, improves shock angle and shock upper frame mount

Heavy-duty tie rod kit: 19-inch travel with 3-inch ground clearance at full bump with 30-inch tires

Rear upper shock tower kit, improves shock angle and ground clearance

Rear wheels moved rearward 3/4 inches to optimize rear CV joint working angles

Heavy-duty sway bar end links

Durable black powder coat finish

High-performance stainless-steel brake lines

Demon Powersports Xtreme HD complete axle assemblies

24-month manufacturer warranty

Package Includes: 

Cognito Long Travel Front Control Arm Kit

Cognito Long Travel Rear Control Arm Kit

Cognito Long Travel Tie Rod Kit

Cognito Sway Bar End Link Kit

(2) Demon Powersports Xtreme Duty Front Axle Assembly

(2) Demon Powersports Xtreme Duty Rear Axle Assembly Long Travel Suspension Package

Fitment: 2016-2021 Yamaha YXZ1000R

Note: Shock re-valving and springs are required, and sold separately

Learn More and Buy the Long Travel Suspension Package Here. 

If you have any questions, please do not hesitate to contact the Vivid Racing team. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

[vividracing]

New Post has been published on https://www.vividracing.com/blog/new-baja-designs-squadron-nighthawk-led-mirror-kits-now-available/

New Baja Designs Squadron NightHawk LED Mirror Kits Now Available

Assault Industries and Baja Designs have worked together to create a beautifully machined mirror system with integrated Squadron Sport LED lights to keep you safe. Take your vehicle to the next level with 6,300 combined lumens of premium Baja Designs LED lights, and keep an eye on the back of the pack with high-quality mirrors from Assault UTV. 

The Squadron Sport LED light is hands-down the best and most affordable LED on the market today.  Although similar in aesthetics to the Squadron Pro, the application range varies. The Squadron Sport utilizes 4 Cree LEDs producing an impressive 3,150 lumens at 26 watts making it ideal for near field, side/backup, and scene lighting application. 

Click Here To View Baja Designs Inventory

The complete package was carefully designed to offer a perfectly aimed light, regardless of the mirror viewing angle. The Nighthawk is fully serviceable and built with patented Baja Designs Wide Cornering lenses for maximum cornering visibility. Integrated forward-facing cooling fins ensure the light continues to run at 100 percent, even in the harshest of conditions. There is no better UTV accessory you can install on your UTV that will help you go fast with confidence and the utmost safety.

The Nighthawk LED Side View Mirror System delivers practical styling, unparalleled safety, and performance to your UTV. Sold as a turn-key kit, this system requires no trimming, drilling, or cutting for a truly trouble-free installation process. This product will fit the following vehicles: the Polaris RZRS, the Yamaha YXZ/Rhino, the Textron XX/Wildcat, the Can-Am X3, the Kawasaki Teryx, the Can-Am Maverick, and the Honda Talon. Please note that this kit is currently on pre-order. 

Baja Designs Features:  Satisfactions Guarantee –30 Day Money Back  Guarantee  Limited Lifetime Warranty– Complete Purchase Protection  uService®– Replaceable Lenses And Optics  ClearView®– All The Light, Right Where You Need It.  MoistureBlock™– Waterproof, Rain Proof, Submersible  CopperDrive®– Only LED Driven At 100%  5000K Daylight– Less Driver Fatigue, Natural Color 

Specifications (per mirror):  Lumens:3,150 Utilizing 4LEDs  Wattage/Amps:26W / 2A   LED Life Expectancy:49,930 Hours  Front Lens:Hard Coated Polycarbonate  Housing:Powder Coated Cast Aluminum  Bezel:Billet Machined Aluminum  Hardware & Bracket Material:Stainless Steel  Exceeds MIL-STD810G (Mil-Spec Testing)  Built-In Overvoltage Protection  IP69K (Waterproof, Submersible to 9ft)  IK10 Compliant (Mechanical Impact Testing) 

Get the NightHawk Mirror Kit, Squadron Sports, 1.75″ Kit Here. 

Fitment: Polaris RZRS | Yamaha YXZ/Rhino | Textron XX/Wildcat

Includes: 

(2) NightHawk, Squadron Sport Mirrors

(2) 1.75″ Tube Mounts

Harness

Get the NightHawk Mirror Kit, Squadron Sports, 1.875″ Kit Here. 

Fitment: Can-Am X3 | Kawasaki Teryx

Includes: 

(2) NightHawk, Squadron Sport Mirrors

(2) 1.875″ Tube Mounts

Harness

Get the NightHawk Mirror Kit, Squadron Sports, 2.0″ Kit Here. 

Fitment: Honda Talon | Can-Am Maverick

Includes: 

(2) NightHawk, Squadron Sport Mirrors

(2) 2.0″ Tube Mounts

Harness

If you have any questions, please contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

[vividracing]

New Post has been published on https://www.vividracing.com/blog/new-baja-designs-ktm-headlight-kits-and-polaris-rzr-roof-mount-light-bar-kit/

New Baja Designs KTM Headlight Kits and Polaris RZR Roof Mount Light Bar Kit

Click Here To View Baja Designs Inventory

Lighting during those late-night off-road sessions can be vital to safety. Illuminating what is ahead of you allows you to plan for what is ahead before it’s too late. Obstacles could lie ahead without being aware if not properly equipped.

The scientists of lighting, Baja Designs developed a new headlight kit with a shell for 2020+ KTM motorcycles and Polaris RZR. Offering three options for the KTM the lighting can be dialed for personal preference. The Polaris RZR roof mount light bar kit fits two styles of light bars for riding scenarios.

Pushing out an astonishing 4,900 lumens, the XL Pro KTM kit features a 20% dimming function. With AC and DC options, this headlight kit easily installs as if it was a factory headlight. For models without a headlight, the surrounding shell is provided.

The Polaris RZR roof mount light bar kit offers the option to run a 30-inch S8 light bar or the brighter OnX6+. Utilizing the factory mounting points, installation is made simple and easy. Both light bars are equipped with battery management technology which eliminates flickering at low voltage.

Each of these new products from Baja Designs provides a plug and play lighting solution for your machine. Be sure to take the upper advantage on the trails with these new products!

Learn More and Purchase Baja Designs Products Here

If you have any questions, please contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

30″ OnX6+ Roof Mount Kit Polaris RZR Turbo/S | XP1000/900 2014+

30″ S8 Roof Mount Kit Polaris RZR Turbo/S | XP1000/900 2014+

XL 80 LED Headlight Kit w/ Shell (D/C) KTM 2020+

XL Pro LED Headlight Kit w/ Shell (A/C) KTM 2020+

XL Pro LED Headlight Kit w/ Shell (D/C) KTM 2020+

[autopartstoys]

Baja Design 2008-2014 Polaris RZR 800 Headlight Kit Sportsmen 447019