#Ats-Elgi equipment

[atselgi]

How does 3D Wheel alignment machine work?

A wheel alignment is done using an alignment machine that measures the vehicle’s wheel angles. These are calculated and compared against your vehicle’s original specifications. The technician makes adjustments to the camber, caster, and toe of each wheel as needed.

Below is the 3D Alignment machine sequence:

Vehicle placement Fixing clamps and image sensors

Measuring sensors

Computer with Graphical user interface

Perform alignment

Vehicle placement:

Vehicle placement is necessary for alignment

We need a PIT or LIFT for vehicle placement. PIT or LIFT is needed to have a clear flatness in the vehicle placing area. The alignment machine installed at Pit or Lift front is viewed from the vehicle front

A turn table placing area is required for placing the front wheel

Turn the table top and the rear area should be on the same level.

vehicle should be placed on PIT or LIFT and the front wheel should be placed on the turn table-top.

Fixing clamps and image sensors:

3D Wheel Alignment machine has image sensors and uses clamps for fixing the image sensors with a wheel. The image sensors calculate the alignment reading of wheels Wheel clamps have rim locking pins (Fingers) for fixing the wheel rim.

Measuring sensor:

The measuring sensor is located at the front of the vehicle.

There are 2 or 4 measuring sensors used for alignment. The left side sensor measures the vehicle’s left side wheels and the right side sensor measures the vehicle’s right side wheels. Measuring sensors are fixed on one horizontal beam or individually with a vertical beam. The fixings are leveled with the left and right sides

Computer with Graphical user interface program:

Measuring sensors take the images from image sensors on the wheels and send them to the computer for calculation. Computer program — Graphical User Interface embedded in the alignment machine calculates and displays the results. This program works with Windows platform

Measuring sensors send the captured images to a graphical user interface program and that program calculates the alignment value with the calculating method and displays the adjustable reading for adjusting the wheels for alignment.Mechanics adjust the alignment based upon the result.

How is wheel alignment performed?

Step 1: Select the required alignment vehicle specification for adjusting the alignment value based on OEM-specified specification.

Step 2 Fix the image sensors with wheel clamps on the wheel rim

Step 3 Do the run out sequence. The run out sequence is measuring the wheel clamp fixing the error, Rim bend, and wheel centroid. The run out sequence is done to avoid these errors reflecting on alignment readings.

Step 4: Do the Caster measuring sequence. That measurement needs caster and SAI measurement for taking the caster and SAI reading

Step 5:All measured alignment values are displayed on the monitor for alignment and the mechanic performs the alignment based on the displayed values on the required wheels.

Other Blog Posts:

Vehicle Suspension Test and it’s importance

100% Water Recycling Plant for Car Wash

[industrial-air-solutions-cbe]

Pneumatic Tools Wholesaler & Dealer in Tamilnadu | Air Tools

ATS ELGI is an authorized Dealer in Coimbatore & Tiruppur. We provide a complete range of pneumatic tools, ergonomically designed, compact powerful & durable.

[atselgi-blog]

IMPORTANCE OF EV BATTERY LIFT

Purpose of EV Battery Lift:

The battery lifter has been designed for – In Electric Vehicles the battery is the prime mover and a heavy component. It is critical that for safe removal and installation of battery a lifting equipment is to be used.

What ATS ELGI offers? ATS ELGI introduced new EV – Battery Lift – 1.0T which is suitable for safe removal and installation of battery pack in Electric Vehicles.

Model : EV – BATTERY LIFT 1.0T

Product USP:

Benefits of Very Low Shut Height:Accommodates Larger Battery dimensions &ease of unloading the battery from the vehicles

Max. Lifting Hight: Battery Lift Sturdy double scissor lift is extra height which is help to unload the battery from the vehicles

Power Pack Placement: Horizontally Mounted & Suspended Hydraulic Powerpackfor safety purpose & no hindrance on top platform

Safety Lock Mechanism: Mechanical Auto Ratchet lock & foot pedal lock release / During locking mechanism, cylinder will get free & higher cylinder life

Overall Dimension:Longer Platform & lower shut height for easy movement of battery & unloading from vehicles

Dual Safety: Mechanical Auto Ratchet lock (5 Positions) + Electrical lock & Emergency Switch

Product Features:

Lesser footprint

Double Scissors Lift with auto ratchet guided lock

Top Platform X, Y Sliding Feature

Safety rope/strap holder in top platform

Easy maneuver of lift with castor wheels

Double Scissors Lift with auto ratchet guided lock

Very Low minimum height for easy Battery Transfer

Dual Purpose Handling: Battery / Drive Chain Transfer

Foot Operated Mechanical Lock release

Portability, Single Remote Operations (Hydraulic UP, DOWN)

Suspended Horizontal Power pack & no hindrance to top platform

Longer & Wider Platform to accommodate universe / all range of EV Batteries

Applications:

Suitable for: EV – Passenger Vehicle

Easy removal of battery pack & installation

Specifications:

S. NOParameterUOMData1Lifting Capacitykg10002Max. Lifting Heightmm18003Min. Heightmm3504Operation–Electro-Hydraulic5Locking Mechanism–Mechanical6Platform Size L x Wmm1500 x 8007Motor & Power SupplykW1.5 kW, 2 HP, 1 PHstrong>230 V / 50 Hz8Oil Tank Capacitylitres5

[ellamrfr]

The Global Brake Lathe Machine Market to Expand at a CAGR of 3.5% by 2025

Market Overview:

Brake lathe machine market is assessed to witness 3.5% CAGR during the figure time frame, 2022-2030.

The enormous expansion in the interest for present day vehicles like independent vehicles, associated vehicles, and electric vehicles are supposed to set out open doors in the worldwide market attributable to the expansion popular for vehicles. This is supposed to impact the interest for brake machines, including brake machine. Tracker Engineering Company, Hennessy Industries, Inc., Atlas Auto Equipment, and Pro-Cut International are the significant brake machine makers, which principally center around item improvement and key associations with car part produces in the Europe and Asia-Pacific. These advancements are supposed to set out worthwhile open doors on the lookout and further impact the venture open doors for the makers, during the conjecture time frame. In any case, the exorbitant costs of hard core brake machine machines are supposed to hamper the development of the worldwide brake machine market during the estimate time frame.

Get the sample copy of report here

Market Segmentation:

The global brake lathe machine market can be segregated on the basis of application, type, vehicle type, and regions.

On the basis of application, the global brake lathe machine market can be classified into Light-Duty, Heavy-Duty, and Medium-Duty.

On the basis of type, the global brake lathe machine market can be classified into Passenger Car and Commercial Vehicle.

On the basis of vehicle type, the global brake lathe machine market can be classified into Off-Car Brake Lathe Machine and On-Car Brake Lathe Machine.

On the basis of regions, the global brake lathe machine market can be classified into Asia–Pacific, North America, Europe, and the Rest of the World.

Key Players

The forefront players of the market are  Hunter Engineering Company,   Multipro Machines Pvt Ltd, BendPak Inc., ACCU−TURN, Hennessy Industries, Inc., Sino Star Automotive Equipment Co., Ltd, Atlas Auto Equipment,  Pro-Cut International, Equipment Solutions, AUTOPRO-UP Co., Ltd,  a Division of IDSC Holdings Inc.

Recent Developments:

March 2020: With north of fifty years of assembling experience, ATS ELGI has one of the vastest and most idealized scope of Wheel Service Equipment prepared for adjusting, adjusting, evolving, mounting, blowing up, dab seating and vehicle wellness testing. These items convey exhaustive and exact outcomes to guarantee greatest wellbeing out and about.

Explore trending research reports@

India Rice Milling Market

CNC Router Market

Snow Pusher Market

Bagging Machine Market

[shalimarfoundry]

Browse a wide range of robust, durable and genuine pneumatic air accessories & parts for your Elgi air compressors. Shalimar foundry is a dealer of Elgi equipments and ATS Elgi in Telangana and Andhra Pradesh.

[reportwire]

ATS ELGi announces manufacturing agreement with VTEQ, Spain

ATS ELGi announces manufacturing agreement with VTEQ, Spain

7500 sq. ft. world-class facility setup to manufacture imported vehicle testing equipment for India, in India at affordable price points ATS ELGI, a wholly-owned subsidiary of Elgi Equipments Limited and India’s largest garage equipment manufacturer, announced its manufacturing agreement with VTEQ, a global leader in vehicle testing equipment based out of Spain. With this partnership, ATS ELGI…

[researchkraft19]

Wheel Alignment System  Market Projected to Witness a Single-Digit CAGR During 2020-2027

Research Kraft has published the latest research report on the global Wheel Alignment System market. The report helps in delivering key insights about the Wheel Alignment System market and provides a competitive edge to the clients. The research study on the Wheel Alignment System market includes all the detailed information on the current market situation supported by the historical records and also have analysis about the future market predictions. The report represents a 360 degree overview of the market and its key players.

Access PDF Sample Copy of the Report, Click here @ https://www.researchkraft.com/request-sample/1096340

The novel COVID-19 pandemic has put the world on a standstill, affecting major operations, leading to an industrial catastrophe. This report presented by Garner Insights contains a thorough analysis of the pre and post pandemic market scenarios. This report covers all the recent development and changes recorded during the COVID-19 outbreak.Understand the influence of COVID-19 on the Wheel Alignment System Market Size with our analysts monitoring the situation across the globe.

The most significant players coated in global Wheel Alignment System market report:

Cormach, Hofmann, BendPak, Corghi, Hunter Engineering Company, Rotary Lift, John Bean, CEMB SpA, Beissbarth GmbH, Chief Automotive Technologies, Supertracker, BoschTecalemit, Garage Equipment, QuickTrak, Ravaglioli SpA, Certek Group, August Handel GmbH, SIRIO EQUIPMENT, PASEF, ATS ELGI, Launch

Major Types of Wheel Alignment System covered are:

3D Wheel Aligner

CCD Wheel Aligner

Laser Wheel Aligner

Major end-user applications for Wheel Alignment System market:

Passenger Vehicles

Commercial Vehicles

Global Wheel Alignment System Market Regional Analysis:

North America (U.S., Canada, Mexico) Europe (Germany, U.K., France, Italy, Russia, Spain, etc.) Asia-Pacific (China, India, Japan, Southeast Asia, etc.) South America (Brazil, Argentina, etc.) Middle East & Africa (South Africa, Saudi Arabia, etc.)

Any query? Enquire Here For Discount (COVID-19 Impact Analysis Updated Sample): Click Here https://www.researchkraft.com/check-discount/1096340

Points Covered in The Report:

The major points considered in the Global Wheel Alignment System Market report include the leading competitors operating in the global market.

The report also contains the company profiles of the players operating in the global market.

The manufacture, production, sales, future strategies, and the technological capabilities of the leading manufacturers are also included in the report.

The growth factors of the Global Wheel Alignment System Market are explained in-depth, wherein the different end-users of the market are discussed precisely.

The report on the Global Wheel Alignment System Market is a worthwhile source of information for every policymaker, investor, stakeholder, service provider, manufacturer, supplier, and player interested in purchasing this research document.

Access full Report Description, TOC, Table of Figure, Chart, etc. @https://www.researchkraft.com/send-an-enquiry/1096340

Contact Us:

Research Kraft

Phone: 888-213-4282

Email: sales@researchkraft.com

[cripumpsmanufacturer]

Lube Equipment Dealer in Telangana, Andhra Pradesh

Shalimar Foundry is a dealer of Ats-Elgi equipment and offers Centralized Lube Equipment Management Systems that are engineered to effectively monitor and dispense lubrication to all your workshop requirments.

https://shalimarfoundry.co.in/lube-equipments/

[industrial-air-solutions-cbe]

Borewell Compressor Pumps and Motors

Borewell Compressor Pumps and Motors

By pressurizing air and forcing it through pipes into borewells, borewell compressor pumps create a mixture of compressed air and water that is less dense than the surrounding water and therefore flows upwards. Borewell compressors are used for agricultural, industrial and domestic purposes for decades. With extensive experience in the industry, ELGi manufactures borewell compressor pumps and motors that are highly efficient, reliable and economical. Industrial air solutions is an authorized dealer of ELGi borewell compressor pumps and we offer both single and two stage borewell compressors. They are suitable for continuous use in food processing, farming, and the medical industry. These pumps consume low power and can be used in single or two stages with no clogging. So choose the right air compressor for your business.

Features of ELGi Borewell Compressors

Designed for efficiency close to zero maintenance

Highly efficient crank shaft with roller

Rust proof and robust steel casting body

Non-stop performance and hardly heats up

Prompt and efficient after sales service

High quality

Only pipelines are kept in the borewell. The borewell compressor pump and motor can be erected at any convenient place

Maintenance Practises

To prevent breakdown, serious damage and extensive downtime, a definite schedule of preventive maintenance inspections should be followed.

Do not operate the compressor with the valves shut off. It might lead to some damage.

Check the starter functionality.

Cool down the compressor before working because the compressor gets heated up during the operation.

Clean the compressor pump regularly.

Inspect the crankcase for oil levels. Consider refueling with the right grade and quantity of oil if necessary.

Check the tension of the belt.

Make sure the air filter is clean, and that the breather valve is seated properly by disassembling, cleaning, and checking once in a month.

To avoid leakage all the pipe joints should be checked.

If you notice any abnormalities in the working of your borewell compressor pump, contact the dealer from where it was purchased.

[industrial-air-solutions-cbe]

IAS is a dealer of electric lubricated screw air compressors in Coimbatore & Tiruppur. We supply all ELGi air compressor equipment with high quality. Visit Now!

ELGi Electric Lubricated Screw Air Compressors

[industrial-air-solutions-cbe]

IAS offers high reliability and low maintenance ELGi’s EN Series screw compressors are ideal for industrial applications where size, efficiency and cost matter.

[industrial-air-solutions-cbe]

How to Choose the Right Air Compressor for Your Business?

Due to their versatility, air compressors are great additions to any business. In comparison to electric power tools, these robust and reliable machines perform a wide range of tasks. Applications range from supplying energy to small appliances to industrial processes. Industrial and commercial businesses cannot function without air compressors. It can be difficult, however, to find the best air compressor suppliers for your business needs. There are a few factors to consider while choosing the perfect air compressor for your business.

Quality and Reliability

Customers often choose products based on their appearance, and then they suffer later due to downtime issues. Long-term performance is determined by the quality, construction and the air compressor features. In this regard, we at IAS sell ELGi industrial compressors of the highest quality and made using the best materials available. Also ensure that the supplier is stocked with genuine air compressor parts in case you need it. The objective of an air compressor supplier is to increase the efficiency and reliability of the air compressors that they sell. Compressor technology is continuously evolving, so the best air compressor suppliers emphasize incorporating these newer innovations into their products and systems.

Capacity of the Compressor

Volumetric flow of air and pressure at which it is compressed determine an air compressor's capacity. The power rating of an air compressor (in kW or HP) is likewise determined by this. Air audits help companies to get valuable insights into their plant’s compressed air utilization.

PSI - Pounds Per Square Inch measures the air pressure of that air output and symbolizes how well the compressor can pressurize air.

HP- Horsepower indicates the amount of power the compressor needs to turn on the pump.

CFM - This is the amount of air that is produced in Cubic Feet per Minute; so, 10 CFM means that it can release ten cubic feet in a minute.

Duty Cycle and Utilization

Generally, Industrial Recep compressors can operate at a duty cycle of 75% to 100% and Screw compressors are designed for a 100% duty cycle, making them capable of continuous operation. An understanding of the life cycle cost of a compressor is essential before making a purchase decision. It is composed of Initial Cost + Maintenance Cost + Energy Cost.

If the compressor usage is between 75-100% load pattern and on Budgetary, a reciprocating compressor should be selected.

If the use is between four and eight hours a day, a belt driven screw compressor is most appropriate.

If the use exceeds continuous operation for a day, a direct drive screw compressor should be selected.

Controls

The two main types of control systems used in air compressors are fixed-speed and variable-speed controls, both of which aim to match air supply to air demand. Consider the controller and the features of the machine before buying an air compressor. It might be digital or manual. You can also access maintenance schedules, history, and warnings. These systems provide you with the exact data that you need for optimal functioning of your air compressor.

Noise

The noise level of an air compressor system varies from model to model. Be it any model, some amount of noise while operating is common when it comes to compressed air systems. Many air compressors are designed with a noise reduction system to make the workplace more comfortable. No one needs a noisy machine. So before buying an air compressor it is important to consider the amount of noise level of an air compressor.

Cost and Service

To make the most informed purchase, you should consider your business needs and budget carefully. Compare quotes from several suppliers and choose the one with the best model, quality, and reliability. Therefore, it is essential to ask about the warranty, after-sales air compressor service and maintenance plans before purchasing an air compressor because they are expensive to repair often. So, you could save money by using the warranty to protect the compressor and even other parts.

Our professionals at IAS can simplify your work and help in selecting the industrial air compressor that is right for your small or medium sized business.

[atselgi]

DIFFERENT TYPES OF TYRES AND WHICH ONE SHOULD BUY

 The tyre industry has grown rapidly and there are different types of tyres manufactured in recent years in terms of features, segments and price range. Today, we get tailor-made tyres to suit our exclusive needs. Also, tyres are now designed in a way to match the vehicle’s performance and handling needs.

Customers must be aware when purchasing new tyres because of the wide range of products available today. Detailed research in this regard will give you an idea about different product specifications and vehicle’s compatibility.

A perfect tyre purchase will improve your vehicle’s performance, handling, corner-steering and safety standards. Here is a comprehensive guide for you on different types of tyres, and which one you should buy.

The Tyre Types for Different Season

All-season Tyres

All-season tyres are most popular among vehicle manufacturers. Most vehicle brands deliver their product with all-season tyres fitted on them. The reason is simple, all-season car tyres performs well under a variety of weather conditions, which means they can suit a huge customer base.

The outer tread pattern is different from the inner one. Outer treads are designed to flush out the mud and develop hydroplaning resistance to pave way for optimum traction. The inner treads, on the other hand, are designed to provide corner stability on slippery roads.

However, all-season tyres have their own limitations, which may draw the attention of those who experience extreme weather conditions. Since all-season tyres are designed to perform under varying conditions, they compromise on the performance under extreme seasons.

These tyres are meant to perform only under mild to moderate climates. Therefore, if you live in extreme weather conditions, consider buying season-specific tyres.

Summer Tyres

Summer tyres have been around for ages. These tyres were the first segment introduced by the tyre industry. In the 60s and 70s, summer tyres were the industry standard, and they were also the default option for vehicle manufacturers.

The material on summer tyres is made of an exclusive polymer compound that maintains its form under high temperatures. Also, the traction that you get on these tyres on dry surfaces is exemplary. Additionally, the handling and performance under dry weather conditions are also good.

The linear tread pattern that runs in a single direction offers the least rolling resistance, which is good for fuel efficiency. These tyres can perform optimally on damp roads under mild wet conditions, but they lack hydroplaning resistance under monsoon-like conditions. You can prefer all-season tyres if you experience moderate to heavy rainfall throughout the year.

Winter Tyres

Each types of tyres have their own specifications and it should be chosen based on the requirement. Winter tyres have become very popular with people living in temperate zones. These tyres perform well under extreme winter conditions.

All-season tyres usually fail when the temperature falls below seven degrees because their material hardens, which adversely affects the grip and handling. The polymer compound used in winter tyres is highly advanced and doesn’t harden even when the temperature falls below zero degrees.

This helps in maintaining the pliability and traction on cold surfaces. Also, the treads on these tyres are deeper than usual to provide better hydroplaning resistance against snow and ice buildup.

Additionally, the slits on these ridges help in cutting through the snow and ice effectively. Hence, winter tyres deliver high-speed performance on difficult winter terrains, which makes them desirable.

Governments around the world have mandated that people should switch to winter at the onset of the cold because of their high safety ratings. Therefore, if you experience extreme cold throughout the year, look no further than winter tyres.

Final Thoughts

In conclusion, selecting the right type of tires for your vehicle is a crucial decision that can significantly impact safety, performance, and overall driving experience.

Being the leading wheel service equipment manufacturers, we suggest that you can optimize your driving experience and ensure the safety of yourself and your passengers on the road by considering the factors mentioned above.

Read more posts

How Does Brake Skimming Work and Why It Matters for Your Vehicle's Safety?

Tyre Mounting Lubricant: Is it a Must-Have for Smooth Tyre Installation?

Road to Safety - Understanding in Detail about the Balding of Tyres

[industrial-air-solutions-cbe]

ELGi Electric Lubricated Screw Compressor Dealer | Coimbatore, Tiruppur, Nilgiris & Palghat

IAS is a dealer of electric lubricated screw air compressors in Coimbatore & Tiruppur. We supply all ELGi air compressor equipment with high quality. Visit Now!

Revolutionising Lubrication: ATS ELGI Lube Equipment

Address Info

Industrial Air Solutions LLP 7/9, ELGI Industrial Complex, Singanallur, Coimbatore – 641 005, India

+91 95003 95000

sales@industrialairsolutions.in

[industrial-air-solutions-cbe]

ELGi Electric Lubricated Screw Air Compressors

AS is a dealer of electric lubricated screw air compressors in Coimbatore & Tiruppur. We supply all ELGi air compressor equipment with high quality. Visit Now!

Our offerings include the ELGi EN series and EG series electric lubricated screw air compressors, guaranteeing maximum profitability. With innovative technological features and well-equipped manufacturing excellence, ELGi screw compressors stand out in performance and efficiency.

EN Series Compressors

Address Info

Industrial Air Solutions LLP 7/9, ELGI Industrial Complex, Singanallur, Coimbatore – 641 005, India

+91 95003 95000

sales@industrialairsolutions.in