#600mhz

[foone]

here's a question I'm not sure this is the best place to talk about:

if you were going to build a set of DOS/windows machines to play ALL PC GAMES, how many would you need?

Like, the boring answer is "ONE" but that's terrible and no, not really. Yes you can run DOSBox and such on a modern computer, but there's plenty of games in the hard-to-emulate era where they just won't run on a modern computer without a lot of patching and hacks and even then, maybe not.

So a slightly less boring answer is "TWO": One for the Hard To Emulate Era and one for NOW-GAMES. So like a 600mhz Pentium III with a Voodoo 3 and Windows 98, and a Modern Boring Machine. You play nearly everything on the modern one, including DOS games (using DOSBox and similar), but games that fit in the hard-to-emulate era, you play on the Old Machine.

BUT if you want to have a set of computers for most of the eras of PC gaming, you need more than that. Like if you were populating a museum of PC games. How many? I'm gonna say... FIVE. Maybe SIX.

An IBM XT. This is the best system for the earliest era of PC games: booters, early DOS games, anything without speed control (yes, there are turbo buttons, but they can only do so much). This is like an 8mhz with a 20mb hard drive, 640kb of ram, PC speaker only. You definitely need a joystick.

High-end 486/Pentium. This will play the rest of DOS games and nearly all Windows 3.1 games. 16mb of RAM is more than enough. A hard drive of about ~500mb (one of the first size limits), a soundblaster and maybe a GUS or MIDI device. You'll need a CD-ROM drive, for sure, even though most games won't need it.

Pentium II/III, or an AMD K6: Most early Windows games from the windows 9x era. You'll need a PCI sound card and a 3DFX card, probably a Voodoo 3 or above. You could go with an early nvidia like a geforce 2/3, but then you don't get GLIDE games. Something like 128mb of RAM, a couple gigs of hard drive, nearly all games will be CD-ROM so you want something FAST, and probably an old copy of Daemon Tools/CloneCD and a pile of no-CD cracks, because that will be NOISY.

Late single-core era: Pentium 4 or AMD Athlon 64. This is for the games that are relatively recent (2000s and onward) but have compatibility reasons that make them not run well on modern systems, because they don't handle multi-core systems, 64bit windows, or windowses newer than XP. So obviously this is going to run Windows XP, maybe tweaked Vista at a push, and it will 100% be the 32bit version. You're gonna have like 1-2 gigabytes of RAM, a few hundred gigabytes of hard drive space to a terabyte, and a video card like a GeForce 8-series or a Radeon HD 3000.

Boring modern machine. Fastest CPU/GPU, most RAM, biggest HD, etc that you can afford. Run Windows 10 or 11, it doesn't matter.

And the only reason I say "five or six" is because you might want to stuff another computer in, call it PC 3.5: Basically a fast Win9x machine, but this one uses an nvidia/ATI GPU instead of a 3DFX GPU. This'll be a machine for high-end Win9x/ME games that need more graphics power than a 3DFX card can manage, but don't work on an XP machine. I don't know for certain there are games in that area, but I wouldn't at all be surprised.

[maverickuk]

The Thief series was created by Looking Glass Studios back when game studios would calmly create whole new genres of games before then jumping to an entirely different genre for their next title

After playing the original demo I was completely enamoured by the fictional world Garrett (the playable protagonist) inhabited. Even at the time the game engine had lower polygon counts (i.e. detail) than other games, but decisions like using motion capture for the movement of characters in the game really helped sell the realism of a world inhabited by living people.

Another aspect that felt a cut above the composition was the use of audio. Music was used very sparingly and instead ambient sounds came to the forefront. Better yet was the use of Aureal A3D technology to better simulate how sounds would propagate in 3D space.

The result of all this craftsmanship was a game that felt so very immersive and it's one I've revisited many times over the years.

One of the reasons I built my new Pentium III 600MHz Windows 98SE machine was so that I could install an Aureal A3D Vortex 2 audio card to use with compatible games.

At the time EAX was quite a basic technology that would simply add effects like reverb when a character ended a certain location. Whereas A3D would realistically calculate reverb through sound reflections within a given 3D space.

As much as I enjoyed Thief 1 at the time, for me Thief 2 was the highpoint of the series. This was mainly due to a reduction in the supernatural elements in the first game and instead a focus on the purity of being a thief in realistic environments.

As I look at my original Thief CD jewel case it takes me back to when I first purchased it at a local independent game shop. I was around the age of 18 and was finally earning enough money to indulge my love of technology and games. Sadly I've long since got rid of the bulky cardboard boxes that and other games came in, but I'm happy I've still retained this part of my connection my past.

[computerizedembroiderymachine]

Single Head Computerized Embroidery Machines

Pioneers in the industry, we offer Single Head Embroidery Machines, Computerized Automatic Embroidery Machines, Double Head Embroidery Machines, Lazer Embroidery Machine and Chenille Embroidery Machine from India.

Single Head Embroidery Machine

Product Specification:

Machine Type - Automatic

Types Of Embroidery Machine - Single Head Embroidery Machine

Voltage - 220v

Worktable Size - 400x600mm , 500x1000mm, 500x1200mm

No. Of Heads - Single Head

Number Of Needles - 12

ISI Certified - Yes

Warranty - 12 months

Power Consumption - 220v

I Deal In - New Only

Country of Origin - Made in India

Minimum Order Quantity - 1

Features

Saving Cost by using one set Computer Control to control double row embroidery heads, equal to control two embroidery machines. If it is 22 heads, double row will be 44 heads, it 33 heads double row will be 66 heads. Nearly 50 % Saving on space and human power.

Computer Main Features:

PC 104 military system, DM & PTM SOC vortex 86DX-600MHZ process

Designs Qty: Supports above 1000 Patterns in Storage

Single pattern: Supports above 5 million stitches per single pattern

Language: Support multi countries language

USB prot : Support hot plugging

Main Shaft connector : Ac servo or DC motor

Support Motorized head locking, reduce the noise.

Automatic oiling function to improve working life.

Any device combined, such as Sequin, lockstitch chenille, independent Cording device. etc.

Intelligent stop-protect function: NO need to stop machine by any button or pole, just you put your hand between 2 heads that machine will stop at once. It protects worker's very well, such as an worker is threading the needle or changing the bobbin thread but another worker pulls pole to start machine, the operation won't be effected because intelligent stop-protect function is effective.

Saving area, Saving worker's saving cost, do high production & perfect embroidery For You

Additional Information:

Delivery Time - 30

Packaging Details - Wooden Packing

[techtrendzdhj]

📡 Top On Sale! Quansheng UV-K5(8) Walkie Talkie – Multi-Band Frequency & FM Radio! 📞

Upgrade your communication with the Quansheng UV-K5(8) Walkie Talkie, designed for both air band reception and multi-band transmission (136-600MHz). Whether you need it for DTMF scrambler, frequency scanning, or just to stay connected on the go, this high-performance device offers reliable Vox and FM radio features as well. Perfect for both amateur radio operators and those who need powerful communication tools.

🔒 Features:

Multi-band (136-600MHz) transmission and 50-600MHz reception for versatile use

DTMF scrambler and frequency scan for clear communication

Vox functionality for hands-free operation

Built-in FM radio for entertainment on the go

Compact design with ergonomic controls for easy use

Ideal for radio enthusiasts, emergency communication, and outdoor adventures

💸 Price: $17.18 (was $22.68) ⚡ 24% OFF – Grab this high-performance walkie talkie at a great price!

Don’t miss out on this deal! 🔗 Click & Buy Now!

[nzdepot]

$64.06 $ Vention Cat.8 SFTP Patch Cable 20M Black https://nzdepot.co.nz/product/vention-cat-8-sftp-patch-cable-20m-black/?feed_id=147162&_unique_id=660e6c9580d78 Features: Vention Cat.8 SFTP Patch Cable 20M Black – 40Gbps 2000MHz CAT 8 ETHERNET CABLE – Extremely fast. VENTION Ethernet Cable supports bandwidth of up to 2000MHz and up to 40Gbps data transmission speeds without dropouts. 4x CAT 7(10Gbps), 3.3x CAT 7(600MHz). – Broad Compatibility – CAT 8 Network cable – A perfect choice for game lovers. A CAT 8 Ethernet cable is the best choice for your Xbox, Xbox One, Xbox series X|S, PS5, PS4, Switch, or other devices that use CAT 7/CAT 6a/CAT 6/CAT 5/CAT 5e Ethernet cables. – Practicality – RJ45 Ethernet cable – Durable, gold-plated RJ45 […] #

[www-vcan-cc]

low-pass filter COFDM 420-440Mhz frequency customization

low-pass filter COFDM 420-440Mhz frequency customization low-pass filter COFDM 420-440Mhz frequency customization Frequency Range  420～440MHz Insertion loss ≤1.5db standing wave ratio ≤1.4 out of band suppression ≥90dB @other than 600MHz Withstand power 10W Connector SMA-50K Dimensions  As shown in the picture

[lanshengic]

NXP and Xiaomi Vela jointly build an IoT ecosystem to provide a powerful technology engine for the IoT development community

【Lansheng Technology News】Recently, at the 2023 Xiaomi IoT Ecological Partner Conference, NXP Semiconductors was invited to attend as an important partner of Xiaomi and demonstrated the powerful technical resource support provided to the Xiaomi Vela ecological community.

Xiaomi Vela is an embedded IoT software platform built on the open source real-time operating system NuttX and customized for consumer-grade IoT. It can provide a unified software platform on various IoT hardware, shielding the differences in underlying hardware. Through rich components and standardized software frameworks, it provides a unified software interface for upper-level device developers to open up fragmented things. Networked application scenarios greatly reduce the complexity of development and improve development efficiency.

As a global ecological partner of Xiaomi Vela, NXP is deeply involved in the construction of the ecosystem of this development community and has launched a series of technical resources. At this event, NXP highlighted the i.MX RT1060 EVK development kit.

NXP's i.MX RT1060 cross-border MCU is based on the 600MHz Arm Cortex-M7 core and has 1MB on-chip SRAM. It has strong real-time performance and high integration, and is suitable for various industrial and IoT applications. The i.MX RT1060 series provides 2D graphics, camera and various memory interfaces, as well as a wide range of connection interfaces, including UART, SPI, I2C, USB, 2 10/100M Ethernet interfaces and 3 CAN interfaces. Its other features for real-time applications include: high-speed GPIO, CAN-FD, and synchronous parallel NAND/NOR/PSRAM controller.

In addition, i.MX RT1060 has a 2D hardware graphics acceleration PXP module, 3 I2S interfaces for high-performance multi-channel audio, and supports LCD display controller (up to WXGA 1366 x 768). The i.MX RT1060 is available in 225BGA and 196BGA packages, providing greater flexibility with an extended temperature range of -40°C to 125°C.

The i.MX RT1060 series can be developed using NXP's official MCUXpresso tool chain, including SDK, IDE options, and security configuration and configuration tools, enabling rapid development and supporting various real-time operating systems (RTOS) such as FreeRTOS, Xiaomi Vela, Nuttx, Zephyr, etc. .

Xiaomi Vela is fully scalable from micro (8-bit) to mid-range embedded (64-bit) systems with a high degree of standards compliance, easy to port, fully open, highly real-time and powerful. i.MX RT1060 fully supports Xiaomi Vela. Currently supported drivers include ADC, CAN, eLCDIF, ENC, ENET, GPIO, I2S, PWM, SPI, UART and USB. It also supports Vela’s LVGL Demo and can be adapted to Xiaomi The upper component of Vela framework. This combination of soft and hard will provide a powerful technical engine for the development of the Xiaomi Vela ecological community.

Lansheng Technology Limited, which is a spot stock distributor of many well-known brands, we have price advantage of the first-hand spot channel, and have technical supports.

Our main brands: STMicroelectronics, Toshiba, Microchip, Vishay, Marvell, ON Semiconductor, AOS, DIODES, Murata, Samsung, Hyundai/Hynix, Xilinx, Micron, Infinone, Texas Instruments, ADI, Maxim Integrated, NXP, etc

To learn more about our products, services, and capabilities, please visit our website at http://www.lanshengic.com

[autocaresaigon]

màn hình Zestech Mazda MLK 360

Màn hình Zestech tích hợp camera 360 trên xe Mazda có điểm gì đặc biệt? Màn hình cảm ứng đa điểm của Mazda MLK 360 hứa hẹn mang đến trải nghiệm giải trí tuyệt vời trong khi bạn lái xe.

Với kích thước màn hình lên đến 10.25 inch, nó cung cấp tầm quan sát rộng hơn và thao tác dễ dàng hơn. Màn hình Zestech dành cho xe Mazda có độ phân giải Full HD sắc nét, và được trang bị kính cường lực 2.5D. Đây là thiết bị được thiết kế đặc biệt cho các dòng xe Mazda. Việc lắp đặt màn hình trên xe được thực hiện thông qua jack cắm zin, không ảnh hưởng đến hệ thống điện của xe.

Thông số kỹ thuật ưu việt của màn hình Zestech Mazda MLK 360 là:

Bộ xử lý: CPU Duo ARM® Cortex-A75 2,00GHz

Đồ họa: GPU Mali-400 600MHz

Bộ nhớ RAM: 4GB

Bộ nhớ trong: 64GB

Hệ điều hành: Android 10.0 Chip MT8667

Màn hình: IPS FullHD (1280*720px) – kèm kính cường lực 2.5D

Camera: FullHD (1080px)

[forlinx]

Forlinx Officially Launches RISC-V SoM Based on StarFive JH7110!

Forlinx has officially launched their latest System-on-Module, featuring the powerful StarFive JH7110 RISC-V chip. These versatile SoM and compatible carrier board are now available for order, catering to a wide range of applications including commercial, medical, and industrial automation.

Recently, a few embedded products have emerged utilizing the same processor, including the VisionFive 2, Pine64, and Milk-V Mars. However, the FET7110 SoM will be the first product from Forlinx to feature the integrated Jinghong 7110 processor. See the JH7110 block diagram for reference.

• JH7110 – 64-bit RISC-V, up to 1.5GHz (quad SiFive U74-RV64GC, up to 5.09 CoreMark/MHz)

JH7110 block diagram

The JH7110’s GPU integrates the IMG BXE-4-32 MC1 (up to 600MHz) which offers full support for mainstream APIs like OpenCL 3.0, OpenGL ES 3.2, and Vulkan 1.2.

Regarding power consumption, Forlinx indicates that the JH7110 is segmented into eight independently switchable power domains. Additionally, the CPU frequency can be dynamically adjusted via software, allowing customers to fine-tune the frequency based on various application scenarios that require flexible control and power consumption.

The JH7110 facilitates camera access through both MIPI-CSI and DVP interfaces, with ISP support. It enables video decoding capabilities of up to 4K@60fps and video encoding of 1080p@30fps. Moreover, the SoM supports HDMI (4K@30fps) and RGB (1080p@30fps) display output interfaces, along with MIPI-DSI (2K@30fps).

Specifications listed for the FET7110-C SoM include:

• Memory/Storage:

￮ 2/4GB LPDDR4 RAM

￮ 32GB eMMC 5.0

￮ 100 Mbps QSPI

￮ SD 3.0/MMC 5.0

• Connectivity:

￮ 2x GMAC for RMII/RGMII 10/100/1000 Mbps

• Display/Audio:

￮ 1x HDMI 2.0 (up to 4K@30fps)

￮ 1x 4-lane MIPI DSI, (up to 2K@30fps)

￮ 8-lane I2S PCM/TDM

• Camera:

￮ 1x 4-lane MIPI-CSI

• Expansion:

￮ 1x PCIe2.0x1, 2 PCIe2.0 controllers integrated w/ PHY

• USB:

￮ 1x USB 2.0

￮ 1x USB 3.0

• I/O Peripherals:

￮ 6x UART, 7x I2C, 7x SPI

￮ 1x SDIO

￮ 8x PWM

￮ 64x GPIOs

￮ 2x CAN 2.0B (Up to 5Mbps)

• Power:

￮ 5V DC

• OS:

￮ Linux 5.15.0

• Mechanical:

￮ 60 x 38mm

￮ B2B connectors (3x 80-pin)

Specifications listed for the OK7110-C development board include:

• Memory/Storage:

￮ 2/4GB  LPDDR4 RAM

￮ 32GB eMMC 5.0

￮ 100 Mbps QSPI

￮ SD 3.0/MMC 5.0

• Connectivity:

￮ 2x Gigabit Ethernet ports

• Display/Audio:

￮ 1x HDMI 2.0 port

￮ 1x MIPI DSI

￮ 2x Speakers

￮ 1x Mic

• Camera:

￮ 1x MIPI-CSI

• Expansion:

￮ 2x PCIE 2.0

￮ 1x Micro SIM

• USB:

￮ 1x USB Type-C

￮ 3x USB 3.0

• I/O Peripherals:

￮ 2x CAN

￮ 2x RS485

• Other Features:

￮ 1x Power button, 1x Reset key

￮ RTC battery

• Power:

￮ 12V DC (via barrel connector)

• Mechanical

￮ B2B connectors (3x 80-pin)

These products are now available for ordering. Customers can find the product page for the FET7110-C SoM here.

[guncelkal]

FTP Category 7 Rigid Network Cable NANOCABLE Cable de Red Cat.7 600MHZ LSZH SFTP PIMF AWG26, Gris, 5 m Grey

If you’re passionate about IT and electronics, like being up to date on technology and don’t miss even the slightest details, buy FTP Category 7 Rigid Network Cable NANOCABLE Cable de Red Cat.7 600MHZ LSZH SFTP PIMF AWG26, Gris, 5 m Grey at an unbeatable price. Type: Cable Male Plug Male Plug/Male Plug Colour: Grey Connection: RJ45 x 1 Fonestar: NANOCABLE Cable length: 5 m Connections:…

[marketingyts]

In a strategic move set to reshape the telecommunications landscape, T-Mobile US Inc. has announced its plans to acquire airwaves from Comcast Corporation in a deal valued at up to $3.3 billion. 

The agreement signifies a significant shift in the competitive dynamics of the wireless industry and comes as Comcast pivots its focus in the 5G spectrum arena. Comcast initially unveiled ambitious plans to establish a 5G network for its Xfinity Mobile service last year, relying on spectrum in the 600MHz band and the Citizens Broadband Radio Service (CBRS) spectrum in the 3.5GHz range. However, Comcast’s recent experiences with 5G field tests using CBRS spectrum have exceeded expectations, leading the company to reevaluate its spectrum assets.

[maverickuk]

The Microsoft Sidewinder Force Feedback joystick is still a very well regarded device to this day, as LGR demonstrates in his recent video.

It's a device I would have loved to have owned and experienced back in the day, but at the time I didn't have an income that would have made that possible. So it's a real delight being able to pick up such a item now.

I picked mine up on eBay without any of software or the power adapter. However such things can easily be purchased separately or in the case of the software replicated on a classy looking CD-R.

My Packard Bell with it's 200MHz Pentium processor seemed like a good place to start so I went ahead and installed the software.

Unfortunately although the joystick was detected, when I tested it in the control panel it didn't seem to detect movements smoothly. Worse still the various force feedback demonstrations didn't work! Was my joystick broken?

I decided to double down and ordered a Force Feedback 2 joystick, which is slightly smaller whilst also using a USB interface over the originals gameport connector.

However this newer joystick didn't want to play ball with my Athlon XP based system. What is going on? Have I just bought two broken joysticks?

I also decided to try the original joystick on my slightly more powerful Pentium III 600MHz machine. Perhaps the slower CPU just didn't have enough grunt, even though it met the minimum specs for using the device.

Finally I was rewarded with the behaviour I'd expect from the device. The demos worked and when I tried it in games it also worked perfectly.

Freespace 2 with force feedback? Wow, I'd waited a long time to experience that.

Recommended!

[computerizedembroiderymachine]

Aari Embroidery Machine

Aari Embroidery Machine is one of the famous embroidery art forms in recent days.One of the best worldwide machine in india is aari embroidery machine that sells and manufactured in our Julee brand machines.The designs are seen in lehenga,gown,army badges,caps,etc.This art form originated in India during the Mughal rule and was used mainly to embellish royal attires. Now this aari embroidery is practiced all over the world and you can see it in the work of  reowned fashion designers .

Aari Embroidery Machine

Machine Type - Automatic

Types Of Embroidery Machine - Sequin Machine

Voltage - 220V

Worktable Size - 500*1000 mm

No. Of Heads - Single Head

Country of Origin - Made in India

Enriched by our vast industrial experience in this domain, we are involved in providing an enormous quality range of Aari Embroidery Machine. These products require less maintenance and are easy to operate. Offered products are also precisely examined for quality before shipping to our clients.

Features:

High performance

Low maintenance

Reliable operation

Other Details

Saving Cost by using one set Computer Control to control double row embroidery heads, equal to control two embroidery machines. If it is 22 heads, double row will be 44 heads, it 33 heads double row will be 66 heads. Nearly 50 % Saving on space and human power. Computer Main Features:

PC 104 military system, DM & PTM SOC vortex 86DX-600MHZ process

Designs Qty: Supports above 1000 Patterns in Storage

Single pattern: Supports above 5 million stitches per single pattern

Language: Support multi countries language

USB prot : Support hot plugging

Main Shaft connector : Ac servo or DC motor

Support Motorized head locking, reduce the noise.

Automatic oiling function to improve working life.

Any device combined, such as Sequin, lockstitch chenille, independent Cording device. etc.

Intelligent stop-protect function: NO need to stop machine by any button or pole, just you put your hand between 2 heads that machine will stop at once. It protects worker's very well, such as an worker is threading the needle or changing the bobbin thread but another worker pulls pole to start machine, the operation won't be effected because intelligent stop-protect function is effective.

Saving area, Saving worker's saving cost, do high production & perfect embroidery For You

Additional Information:

Delivery Time: 36

[hackernewsrobot]

Windows NT on 600MHz machine opens apps instantly. What happened?

https://twitter.com/jmmv/status/1671670996921896960

[cksaksen-blog]

흑백 레이저 복합기 20 ppm (SL-M2079F) 소개 및 스펙/매뉴얼 보기

흑백 레이저 복합기 20 Ppm (SL-M2079F) 를(을) 소개합니다. 보시기 편하게 복붙 수준으로 상세 정보를 가져왔습니다. 구매하시는데 도움이 되길 바랍니다. ▽ 제품 소개 프린트에서 복사, 스캔, 팩스까지 올인원 프린터, 복사기, 스캐너, 팩스를 전부 구매할 수도 없고, 사용할 때마다 사무용품점이나 PC방에 가기 번거로우셨죠? 이제 4-in-1 삼성 흑백 레이저 복합기 하나로 가정에서도 이미지를 고해상도로 스캔하여 PC로 전송할 수 있으며, 인쇄, 복사도 빠르고 편리하게 사용할 수 있습니다. 이제 집에서 과제나 문서 작성 시 인쇄, 복사, 스캔, 팩스를 위한 불필요한 시간절약은 물론, 더욱 효율적인 처리가 가능합니다. 600MHz CPU와 128MB 메모리의 빠른 처리속도 다양한 문서에…