#10mm Perspex Sheets

[acrylicsheet12]

We stock all major brands of 10mm Perspex Sheets. It is a high-quality plastic that is simple to deal with and has a high degree of strength and transparency. Many of our goods are shipped to your house. We also have a maximum price match guarantee, so you can be confident that you are purchasing an Acrylic Sheet at the best price online with the best store! For more visit : https://www.acrylicsheetcuttosize.co.uk/

[morganhogg5]

Materials

08.04.21

https://www.bunnings.com.au/aquapro-water-feature-pond-pump-medium_p2820007 https://www.bunnings.com.au/pope-13mm-drip-eze-drip-irrigation-tube-15m_p3132608 https://www.bunnings.com.au/70-x-35mm-mgp10-ut-pine-timber-framing-linear-metre_p8030000 25m - 75 x 35 H3 Pine 

2 - 1200 x 2.4m plywood sheets 

4 - fixed wheels. 

2m x 2m Perspex sheet - 10mm thick 

[d-c-physical-computing]

How to build a Battling Robot

What you will need:

Housing

Perspex 20cmx20cm x3

2mm Aluminum Checker Plate Sheet 200x1000mm x1

Aluminium Square U 1.5mx19.5mmx11.5 x1

M5 X 12MM Bolts x40

M5 x 30MM Bolts x10

M5 Nuts x50

19MM x 19MM Angle Brackets x15

M5 Washers x10

M3 Brass spacer 40mm x3

M3 10MM Hex bolts x14

M3 30MM Hex bolts x8

M3 Nuts x8

TT DC Geared Motor Bracket x4

M2 25MM Screws x4

Electronics

Arduino UNO R3 x1

3-6V Gear Motor Dual Shaft x4

Rubber Wheels x4 (Usually bought with the motors)

L298N Module x1

Multicoloured Male to Female Jumper Wires 6 width x1

Black and Red Male to Female Jumper Wires 2 width x5

Different Colour Male to Female Wires x40

Infrared IR Sensor Receiver Module for Arduino x1

HC-08 Bluetooth Module x1

4.8-6V RC Servo Motor x1

3.7V 18650 Battery x2

2 Slot Series 18650 Battery Holder x1

18650 Battery charger x1

5AMP Connector Terminal Strip x1

2A 20MM Fuse x1

5A In-line Fuse Holder x1

3 pin toggle switch 2 way x1

IR Controler

Getting Started

I thought of the idea to build a robot because at the time I thought It would be fun and achievable within my time-frame. I knew that It’d be a tough project, however I decided I wanted to try and make it relatively eco-friendly. I came up with the idea to reuse my old speaker created for my Design Technology GCSE. I started breaking the speaker apart and salvaging the perspex.

After I removed the sides, base and lid I started wondering what I could do with them, funnily enough the base and the lid remained as the base and lid of my new robot. As soon as this was decided I started cutting holes into the plastic for the wheels to go as well as drilling the holes for the motors.

One of the earliest setbacks I encountered were the holes I originally cut for the wheels as they were not big enough to give the wheels the required movement. This meant I had to go back and cut the holes bigger. After this I started to screw the motors in place with a Geared Motor Bracket and two M3 30MM hex bolts then capping those of with two M3 Nuts. Then I screwed two M3 10MM Bolts vertically into the motor brackets to secure them. I then screwed the wheels onto the motors using four M2 25MM screws, when this was done I proceeded to screw on the L298N Module and connected the motors to it.

After this was all wired up correctly I added a canopy by drilling three holes in the base and three in the canopy and then adding the M3 brass spacers and then screwing them in with six M3 10MM hex bolts. I did this so I could use It to house my Arduino later. 

[dramamask]

Make A Mystical RGB LED Wall Frame

Using 5V RGB LED lighting, EVA foam and acrylic paint to make this mystical design with a Celtic flavour. Carve and make patterned designs from the EVA foam. Engrave an acrylic board or piece of perspex. Paint aged and worn stone effects and metallic effects with acrylic paints. This video shows a step-by-step process of buliding this partlicular mystical LED wall frame.

If you enjoyed this video, please like and share. :)

Any comments, please post below. :)

Subscribe at: http://www.youtube.com/dramamask2011 Website: http://www.dramamaskevolution.com Facebook: http://www.facebook.com/dramamaskevolution Twitter: http://www.twitter.com/dramamask Instagram: https://www.instagram.com/dramamask1973 Ebay: http://www.ebay.co.uk/usr/dramamaskevolution Etsy: https://www.etsy.com/uk/shop/DramamaskEvolution

For molding and casting enthusiasts, please visit: http://www.diymolds.com

Music by Angel Rust

Related videos: Cast A Concrete Tea Light Candle Holder: https://youtu.be/nIbzX78evyk Make & Sculpt A Celtic Plaque: https://youtu.be/irwl__pX11Q Make A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series: https://youtu.be/e3qu--QknLI Make A Hand Lifecast With Alginate & Plaster Of Paris: https://youtu.be/g5HmOXGA82E Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI

Recommended products & materials: CALISTOUS 5M 5V 5050 60SMD/M RGB LED Strip Lamp Bar TV Back Lighting Kit USB Remote Control Black: http://amzn.to/2pubAXD JSG Accessories® Outdoor/Indoor Protective Flooring Mats -9 pcs interlocking children`s soft foam eva play mats suitable for Gym, Play Area, Exercise, Yoga in BLACK 9-108 tiles ( 9-108sqft): http://amzn.to/2GRoTcq Sony CX240E Full HD Camcorder - Black: http://amzn.to/2t539ls Nikon D5300 Digital SLR Camera - Black (24.2 MP, AF-P 18-55VR Lens Kit) 3-Inch LCD Screen: http://amzn.to/2t54ngv YOUMU 1Pc EVA Foam Sheets 35x50cm Kids Handmade DIY Craft Cosplay Model 1~10mm Thickness Black: http://amzn.to/2u94mNz A4 Size Clear Acrylic Perspex Sheet / Panel 297mm x 210mm in 2mm 3mm 4mm 5mm 6mm 8mm 10mm - Free Shipping (2mm Thick): http://amzn.to/2G0PF0H Dremel 3000-15 Multitool, 130 W, 15 Accessories: http://amzn.to/2HVHTFZ

[jrtindustries-blog]

Why Your Old Signage Should Be Replaced With Perspex And Acrylic Panel

From shop to showroom and office to hotel – we need to use signage everywhere. When it comes to add stylish look to your property that can be your corporate office plaque, office or hotel room number or residential place sign, Perspex acrylic signage is an excellent and affordable solution.

These easily available sheets have similarity with the glass although acrylic has better insulation than glass. Moreover, you can easily install them yourself if you can buy Perspex and acrylic cut to size superior in quality. Otherwise, it is always better to take the professional help from the signage service provider who can provide superior finish with an exceptionally light transmission quality.

Why should we choose Perspex and acrylic signs?

·         Who doesn’t want to give a clean, stylish and smarty look in his residential or business properties? Obviously, everyone! This is exactly what Perspex and acrylic signs serve. For any kind of small signs, these are the most popular choice at the present days.

·         Although light in weight, these sheets have 10 to 20 times better impact resistance than glass.

·         Perspex and acrylic signs come with long durability. The material manufacturers often give at least 5 years guarantee on these products.

·         You have addition choice to give cleared modern edge look by choosing diamond polish with the Perspex and acrylic signs.

How to choose Perspex and acrylic sign?

Perspex and acrylic sheets do not cost much. While shopping for these sheets, you need to figure out the right measurement and thickness.

·         Usually, standard sizes for these sheets are 2030mm x 1523mm and 3050mm x 2030mm. Alternatively, you can choose the customised size as per your requirement.

·         Then you need to decide the thickness of the panel as there is a wide range of thickness and 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, and 25mm are considered as standard thicknesses as they can give a clear look. You can also go for thicker acrylic sheet as much as 200mm.

·         Perspex and acrylic sheets are also available in all types of colours. Based on the surroundings and interior look, you should choose a compatible colour for the signage panel.

How to fix your Perspex acrylic signs?

Most of the manufacturers supply Perspex and acrylic cut to size in A5, A4, A3, A2, A1 and A0 and several other options. They usually supply he panels with adequate numbers of drills on its surface. The holes are already standard in size so that you can easily fix them on the right place.

Now, you need to figure out the exact place where you wish to fix the acrylic signage. Screw the signage plate to fix it on the wall. It is quite easy to fix it than you think.

Once the installation of your Perspex and acrylic signage is done, you can definitely make out how it helps to increase the aesthetics of the place.

[kevinjohnsonbafineart-blog]

Neodymium magnets

From First for Magnets website (where I’ve ordered the test magnets from): Neodymium magnets are the most powerful of all permanent magnets. They are often known as “Super Magnets”.They are used in applications where the strongest magnetic force is required from the smallest possible volume of magnet material.Even small neodymium magnets have a surprising amount of magnetic force and they are capable of lifting in excess of 1,000 times their own weight. A neodymium disc magnet weighing only 2 grams can lift a steel block weighing over 2,000 grams! Neodymium magnets emit deep magnetic fields to attract ferrous items and other magnets from impressive distances. Two neodymium disc magnets 10mm diameter and 5mm thick can attract each other and hold in place, through the thickness of a human finger. .Neodymium magnets (NdFeB), commonly known as ‘rare earth’ magnets are high-performance permanent magnets constructed from an alloy of neodymium, iron and boron. They are true permanent magnets and will not lose their magnetism unless they are heated to a temperature which exceeds the maximum operating temperature rating or their protective plating is damaged and water ingress causes rusting, which over time will magnetically and mechanically damage the magnets. I’m going to order a coupe of packs of N42 20 x 10 x 2, each magnet has a ‘pull  ‘ weight of 0.6 KG, this mean each perspex sheet, which weighs 2 kg will be supported by 2.4 KG in pull weight. If you double up on the magnet from 1 to 2 the magnetic effect  is increased by 80%.  

[acrylicsheet12]

Acrylic Sheet is the leading manufacturer of 10mm Perspex Sheets. It is an excellent plastic that is easy to manage and has a serious level of solidarity and straightforwardness. A considerable lot of our merchandise are dispatched to your home. We likewise have a most extreme value match ensure, so you can be certain that you are buying an Acrylic Sheet at the best cost online with the best store! For more visit : https://www.acrylicsheetcuttosize.co.uk/

[kevinjohnsonbafineart-blog]

I’ve drawn up some more technical plans for the FIP. I’m going to go for a steel box frame using 1″ box steel and plastic connectors bought off Ebay, Its the same of construction you see on markets, easy to put up and reusable. I’m looking at 16′ Long, 5′ ish wide and 6′ high. I’ll get the metal from Mercers Metal merchants I’ve found a place online that the people at the Making Rooms told me about, its called Kitronic and it sells all sorts of interesting stuff. I need to price it up first, probably will check different places out to compare and once ordered I’m then going to use the perspex to cover the long sides and sit a light source inside at one end on a wood panel, hopefully this will allow some light to escape (just a glow would be good) and direct the majority of it towards the other end where I will have an image of the subjects face. This portrait will be made up of drilled holes in a MDF sheet. I want to show the part of my friends personality that gets through this by projecting light out of portrait, very much like how he projects a sense of normality to the outside world.   I don’t want to be drilling holes in the perspex so I’m looking at using neodymium magnets to hold the perspex to the fame. These are a so called rare earth element that has a high magnetic force. they are small , relatively cheap and very strong, each magnet is only 10mm x 20mm x 2mm, yet has a pulling weight of going on for 1 Kilo. I’ve done a bit of research online but will need to do more and speak to someone who deals with them for more info. Ideally I’l stick the magnets to the perspex using some kind of trade quality bonding tape.