#"Long Island Stone Veneer"

[stonecreationslongisland]

Front and Rear Cambridge Pavers - Seaford, NY 11783

[fauxstonewallpanels-blog]

polyurethane crown molding

Polyurethane crown molding is more comfortable to install than wood

  Before hitting the store, you'll want to take accurate measurements of the rooms you're going to treat. Draw a quick sketch and jot down the length of each wall. When you go into your local home and garden retailer, ask for single, long pieces of molding tailored and cut to each wall length. Otherwise, get the most extended parts you're able to find. Begin with unpainted molding. All painting, if necessary, should be done after the frame is installed.

Materials

● Tape measure ● Painter's tape ● Crown molding ● Coping saw ● Miter saw ● Level ● Nail gun or hammer ● Finishing nails ● Caulk gun ● Paintable caulk ● Ladder

How to install crown molding

1. Use chalk to mark the wall where the bottom of edge your molding will sit (chalk is much easier to remove than a pencil).

2. Cut the ends of your molding to fit into the corners using your miter saw. Set the saw to a 45-degree angle and place your decoration thoroughly flush against the saw's fence. You may want to give this a few practices runs on scrap pieces before committing to a cut on one of your main moldings.

3. If you're still not satisfied with the state of your corners, pre-made corner blocks are a great last resort. They not only hide imperfections but can give your molding an added decorative flair.

4. Cope with the joint using a coping saw. Coping is a handy technique where you shape the ends of your molding so that each fits together perfectly. This curved cut will give you an ultra-tight fit that won't leave gaps between sections of your crown molding. You'll use this technique if you fit smaller pieces together along a single length of the wall or when installing molding in the corners of your room. Once you've completed the cut, fit the pieces together to make sure they're seamless.

5. Now you're ready to put the molding up. Shove it into the corners, so it's nice and snug, and then nail it into place with the finishing nails. If you still have gaps, this is where your handy caulk gun will come to the rescue. Load it with paintable caulk (latex is better than silicone) and fill the holes.

Some of the most beautiful elements of a room are most noticeable when they're absent. Crown (or ceiling) molding adds a sense of solidity to your home and can increase its resale value. The beauty of crown molding is that it's relatively easy to install-- a simple DIY project you can complete over a weekend. Choose long island building supply for quality. 

  You are choosing your crown molding.

MDF

Medium density fiberboard (MDF) is an affordable alternative to wood. You can buy it veneered or stained, and if you're not keen on the natural wood finish, paint it yourself. If your existing wall trim is painted, consider going with MDF as it'll be much easier to paint. Softer than wood, MDF is more prone to denting, so be sure to handle with care.

Plaster

The benefit of using plaster molding is that it can be cast into virtually any design you can think of, from vibrant floral patterns to Baroque or Rococo motifs. The downside is that it can be pricey, as molds are made to order. Plaster is also quite heavy so that installation will require a pro or at least two amateurs.

  Polyurethane

  Like MDF, this is another low-cost option and can last for many years with the bonus of being bug-proof. Say goodbye to termites, woodworm, or pesky beetles. Polyurethane is a good dupe for plaster-- you can get similar casts but at a fraction of the cost. However, like MDF, it does dent easily, so be mindful when you're putting up polyurethane molding.

PVC

Made from plastic (polyvinyl chloride), PVC is an excellent choice for rooms exposed to humidity, like bathrooms and kitchens. PVC does have its limitations, though-- it only comes in simple motifs and painting it is an absolute must. But at an average of $1--$ 3 per foot, who minds doing a little painting?

Modernize, the leader in home improvement contractor lead generation services, has released its latest Modernize Homeowner Index, a quarterly research study that measures sentiment among thousands of homeowners currently considering windows, roofing, solar, or heating and air conditioning projects. Modernize issues quarterly summaries of the ongoing study, helping contractors better serve the home improvement market through quantitative analysis of how homeowners are researching and evaluating their projects. This particular study covers how homeowners educate themselves about the improvement projects they are interested in, how they find and choose what contractors to work with, and how they think about paying for those projects.

KEY FINDINGS

The latest wave of the study found that 51 percent of homeowners utilize online articles as the primary source for research on their home improvement project. And they spend substantial time in their study, with 35 percent of homeowners spending between 1 and 5 hours investigating their project before submitting a lead and a full 28 percent spending more than 10 hours researching on their own. Then, when they're selecting a contractor, homeowners shun lousy communication skills, with 23 percent listing that as a factor that would prevent hiring a faux stone wall panels contractor; by contrast, only six percent listed "Ego" as a factor that would prevent hiring.

Choosing your crown molding

Here are the most common types of crown molding, along with their pros and cons.

- Least expensive - Most expensive

This polyurethane crown molding material has been used for hundreds of years, and good reason. Naturally finished wood adds real warmth and sumptuousness to a room, but it's quite expensive and, if you live in a humid region, it may contract and expand with the temperature. Cutting wood also requires a bit more skill than other materials, so it's best installed by someone who has already tried their hand at carpentry.

" The continued prevalence of homeowners' online research for information and guidance on their home improvement projects points to the importance for contractors to communicate and make connections online," said Jason Polka, CEO of Modernize. When it comes to kicking off their home improvement project, many homeowners are nervous about their understanding of costs and want help. Eighty-six percent of homeowners surveyed had not created a budget for their project, and of homeowners who paused their plan, 58 percent did so because it was too expensive. Across all trades, 42 percent of homeowners would like to finance up to half of their project, and 19 percent would like to finance the entire project. Take a look at long island home improvement  for once in a while. 

" The homeowner's lack of knowledge about costs reinforces the need for contractors to educate customers about financing so that homeowners can have more confidence," said Polka. "Homeowners go online to get quotes and find ways to pay for their home improvement projects. Contractors building supplies should capitalize on those needs by having their websites educate and inform homeowners of the financial options."

This issue of the study is part of an ongoing research project. Modernize is dedicated to educating home improvement contractors so they can better understand customers' needs and preferences to make sound business decisions. Each quarter, Modernize surveys thousands of American homeowners interested in solar, roofing, windows, and HVAC projects.

Visit To The Website for getting more information related to polyurethane crown molding