sockettool - Tumblr blog

[sockettool]

The processing cost is high and the efficiency is low

The debugging time is relatively long, and it takes one or two hours for ordinary technicians to debug. However, the processing cost is high and the efficiency is low. Extrusion processing is processed by professional screw equipment, which is called thread rolling machine in the screw factory industry. Screws and screw machines were first invented and manufactured by the British and have a history of more than 200 years. 

The standard of special screw thread rolling process is different: The thread rolling board for special screws is different from the standard thread rolling board. When cleaning, pour into stainless steel cleaning special removal For oily liquid, clean it at room temperature for 3 to 8 minutes, then rinse with water to dry. 

What kind of screws, although some of the screw fasteners that are exposed on the outside, we can see at a glance. Here we need to clean them to restore them to the real body. It also needs to be removed here to restore the bright appearance. Therefore, when the screws are finished, there will be oil stains on the surface. Some screws hide the inside of the object. 

The stainless steel screws that can be seen everywhere in our lives are all screws that CSK Phillips Head Deck Screw Suppliers are visible from the exposed parts. We have not removed the part that shields the screw. Polishing Polishing is also a common method of surface treatment of stainless steel screws. 

Degreasing During the production process, the screws will pass through several machines full of oil. In order to change the performance of stainless steel screws, there are other methods of surface treatment by plating. The surface treatment methods of stainless steel screws are generally the above three. It also has a special cleaning agent. You only need to clean the surface of the stainless steel screw to make the stainless steel screw bright. Make it more beautiful. 

[sockettool]

The material is generally non-magnetic or weakly magnetic

The shape is stronger and more magnetic. The design of the hole allows the screw to be rotated without being exposed on the surface of the fixed object. In addition, the structure of 304 stainless steel after cold working will also be transformed into martensite.5 tubes are produced.5 times the thread diameter. Screw quantity product; is not a manual art. 

Due to the greater magnetic induction of cold bending deformation, the rectangular tube of the manufacturer is larger than the round tube, especially the section of the angle steel. The screw is a 'quantity product', not a handmade artwork. The material is generally non-magnetic or weakly magnetic, but different magnetic properties due to smelting or processing caused by fluctuations in chemical composition may also appear, but this cannot be considered a counterfeit or substandard

 What is the reason why stainless steel screw manufacturers tell you? As mentioned above, austenite is non-magnetic or weakly magnetic, while martensite or ferrite is magnetic. Like a batch of steel strips, 76 tubes are produced without obvious magnetic induction, and 9. Other head types include semi-circular heads with beautiful appearance, and flat head screws are suitable for tapered screw holes. Therefore, stainless steel screws are mainly used for small-area plates, and traditional wrenches are not easy to use. 

Six hex head screws are the tolerance of hex bolt head wholesale Machine Screws and rod length, so 1 hex bolt is suitable for installation and can be used for all six angle bolts in place. In particular, the magnetic properties of 304 stainless steel caused by the above-mentioned reasons are different from other materials (such as 430 and carbon steel), that is to say, the magnetic properties of 304 steel always exhibit weak magnetic properties.

The accuracy of the screw is usually 6g, and the engineering construction coarse thread is 8G. Spiral type, whether it is glasses or screws, there are many types, the main purpose is to fix the high and large power engineering micro screws of industrial products. 

[sockettool]

The correct cooling plan is an important factor for the surface treatment process of CD thread screws

Skilled technicians, high-quality process operators, they will fully study the product material, determine the process, and make process instructions before performing the CD pattern surface processing on the product to ensure the CD pattern screw surface treatment process Stable quality. mainly produces and sells screws, stainless steel screws, anti-theft screws, special screws, non-standard screws, and aluminum pull Nails, etc., scientifically design a fixture suitable for the product's CD pattern to ensure the product processing pass rate and excellent CD pattern processing effect. 

Let me talk about high-quality CD pattern screw manufacturers, we need to have these 5 factors Everyone knows that a good CD pattern screw is inseparable from various important factors. Choosing a reasonable processing tool, a reasonable processing tool for the CD pattern surface treatment process,Deck Screws this is of very important significance, such as: the tool is unfavorable, it will produce burrs, the angle of the tool is not right, and it will directly affect the CD pattern of the product. 

When we are processing the CD pattern on the surface of the product, if our cooling plan is wrong, even if our pattern spacing, cutter and other parameters are selected correctly, our CD pattern will not achieve the desired effect. Today, the editor summarizes the following 5 points for everyone: They will make different shapes according to the products. 

Therefore, the correct cooling plan is an important factor for the surface treatment process of CD thread screws.Good factories have several engineers who have been engaged in jig development for many years.410 and other materials). 

Air pollution (such as rich in hydrogen sulfide, carbon dioxide, nitrogen oxides, atmosphere), condensed water, sulfuric acid, nitric acid, acetic acid solution composition environment, will also cause chemical corrosion, but also cause the CD pattern screw to rust one of the reasons. 

[sockettool]

Choosing a reasonable processing tool

If you want to have high-quality CD pattern screws, you must first pay attention to both production equipment and operating technicians. Choosing a reasonable processing tool, a reasonable processing tool for the CD pattern surface treatment process, this is of very important significance, such as: the tool is unfavorable, it will produce burrs, the Self Tapping Screw angle of the tool is not right, and it will directly affect the CD pattern of the product. 

The correct cooling plan. Therefore, the correct cooling plan is an important factor for the surface treatment process of CD thread screws. With the comprehensive guarantee of these points, the products made will definitely be high-quality and trustworthy. In the long-term development of CD pattern screws, it is necessary to use a high-precision CD pattern machine to produce high-quality CD pattern screws based on accumulated experience in practice. 

From the perspectives of cutting, dynamic balance, material, thermal effect, etc., scientifically design a fixture suitable for the product's CD pattern to ensure the product processing pass rate and excellent CD pattern processing effect Scientific product processing jigs., is a professional screw factory worth entrusting! Mainly engaged in precision screws, screw manufacturers, special screws, paint screws, electronic screws, plastic screws, anti-loosening screw, etc.

 A good high-quality CD pattern manufacturer should have the above points.  The above is the editor to explain to you the high-quality CD pattern screw manufacturers, which need to have these 5 factors. 

[sockettool]

The rear brake will squeak and pull

It is matched with a seven-speed DSG transmission and a 4MOTION all-wheel drive system. The T-ROC concept car is a three-door crossover and is equipped with a 2. It is expected that the new car will be unveiled at the Geneva Motor Show. The car manufacturers in question are still fond of the brand, and even obsessed with the outdated concept of 'Made in China is not good.

I went to the repair shop to check and found that the brake pad sliding pads were all worn out.9L, and the carbon dioxide emission per kilometer is 129g.153 yuan, and 500,000 pieces are 0. It is also equipped with a detachable tablet computer that can be used as an infotainment system display.111 yuan. This means that in the global economic downturn, German cars have also begun to consider how to save costs, and the choice of floor buckles has become particularly important. 

After putting on the handbrake, it stopped sounding. If you buy 1,000 pieces, the single product price is 0. In the interior, the new car uses leather seats and a 12. When some car owners step on the brakes, the rear brake will squeak and pull. We don't care whether the marketing model of Parts Trading Network can be successful, but it is China gypsum board screw actually a courageous creativity and bold plan in the business model of factory product manufacturers facing terminal consumption.

Going back to Volkswagen’s T-ROC concept car, which is about to be launched, and the exposed design drawings, the T-ROC concept car is a three-door crossover model with a blue metallic paint coating and a three-dimensional grille. The period has been able to catch up with the international level, and several domestic manufacturers have surpassed the level of these countries. These spacers play an important role in the cleaning and comfort of the car. 

The above is the editor to explain to you the automobile plastic buckle and the Volkswagen T-ROC concept car. are professional screw factories worth entrusting!For a long time in the past, when many automakers choose car buckles (bottom plates), they will choose to use car buckles from some well-known foreign companies, but the price of a single product is far more than 1 yuan.

[sockettool]

The quality is sometimes not satisfactory

The above is the editor to explain to you what causes the hardness of CD pattern screws to fail to meet the requirements. A small screw has a lot of energy. Some screw manufacturers do not do inspections and experiments, but heat treatment based on past experience. 

The CD screw manufacturer takes care of each screw seriously and responsibly in the production process, because a small screw is also very important, and the production process cannot be sloppy. 

Now that the Internet is developed, you can buy something without going out, but the quality is sometimes not satisfactory, and sometimes some CD screw manufacturers will not be sloppy when they deliver, and some are for The heat treatment is not done so carefully during the deadline, so it will cause problems with the hardness of the CD threaded screw. Zhangmutou screws, acrylic screws, special screws, is a professional screw factory worth entrusting!  Drywall Screw Manufacturers  We can only pass the instrument screw hardness test.  mainly produces and sells screws.

Screw factory, Changping screw, anti-theft screw, stainless steel screw factory, Huangjiang screw. The reason for the poor heat treatment of CD thread screws is that the heat treatment plant, that is, we often say that the material is hardened by heat treatment to increase the hardness, and the hardness does not meet the requirements.Let me talk about what causes the hardness of the CD pattern screw to fail to meet the requirements