prosparkautoelectrical-blog

[prosparkautoelectrical-blog]

Why Car Engine Overheats and How to Prevent it- Explained by Gold Coast Mechanical Services

Overheating of the car engine is one of the dreadful things you can ever imagine while going for a drive. To ensure safety and effectively handle the situation, you need to understand the ways to treat a car’s engine overheat. The first thing to do is to pull over your car as fast as possible. It’s crucial to have some resources in hand before going for a drive so that to fix small issues with ease.

According to technicians from popular Gold Coast mechanical services, you can turn the heater in full blast. This transfers the excessive heat towards the heater core which will help in pulling down some heat from the coolant. However, this will only buy you a few seconds to get off your car from the road and pull it over.

It takes at least 30 minutes for the engine to cool down. Hence, regardless of what you have seen in movies, do not dare to lift the good of the car, especially when you see steam coming out of it. Also, never attempt to open the radiator cap, since the hot coolant can give you a severe degree of burn.

Signs of an Overheated Engine

Steam under the hood is not the only sign of an overheated engine. Your car may even give you some earlier signs as well. A nonworking vehicle heater can fall under those symptoms, which may also happen due to a stuck-up engine’s thermostat or lack of coolant.

A higher temperature at the temperature gauge is also a sign of an overheated engine. Another sign includes a lighted warning light or a sudden burst of steam from under the hood of the car.

How to Prevent Car Engine’s Overheating Issues?

Low coolant is the prime culprit behind an overheated engine. Make sure to keep the coolant level in check. You can see the level of the coolant by looking at the plastic tank present under the hood.

Aside from that, you must get your entire cooling system checked even at your home by a professional Gold Coast mechanical services like Prospark Auto Electrical.

[prosparkautoelectrical-blog]

Do you need a mobile auto electrician in Gold coast? Then, you can subsequently connect with the highly reputed and leading mobile auto electrician Gold Coast provider known as Prosparkautoelectrical. All of our mobile auto technicians will reach your breakdown spots and fix the problems as soon as possible. We can deal with your auto repairing faults in the electrical system at the remote spots and repair at the fraction of costs by getting the faulty part fixed instead of buying a new one

[prosparkautoelectrical-blog]

[prosparkautoelectrical-blog]

Guide for Car Roof Solar Panel Installations In Gold Coast

Installing a solar panel to a car is a long process and to do it safely is very important. A car is a moving object and speed fluctuates with acceleration and de-acceleration, so to install the solar panel safely, ensuring that it won't fly away with an increase in the speed of the vehicles is very necessary. In this post, we are going to learn about car roof Solar Panel Installations In Gold Coast, Mounting the solar panel: This is the most important and difficult part of the installation, in this process at first you have to attach the solar panel to thin plywood or a metal sheet, in order to attach the solar panel to the board, fix a plastic sheet all around the edges of the board with a strong glue, let the glue dry out, once the plastic sheet is strongly dried with the glue and fixed properly then place the solar panel on the board and mark 4 points to attach it with the board. Drill those 4 points and attach them with knots and bolts.

Drilling and attaching the panel to the roof of the car: To attach the solar panel to your car you just need a roof rack. A roof rack has 6-8 attachments holes, find those attachment holes, once you have found the attachment holes position the solar panel aligning the holes and fix them tightly.

Setting up the solar panel: Once you have attached the solar panel to the top of your vehicle, cover the whole solar panel with a thick blanket making sure that the sunlight is not reaching the panel, if it will come in contact with sunlight while wiring it may result into the burning of the electrical devices attached to it. Once you have completed the wiring, you can uncover the blanket. Make sure that you have attached wire properly with the charge controller and power inverter.

So these are the steps to install a solar panel on your car, for the safest and reliable Solar Panel Installations In Gold Coast contact Pro Spark Auto Electrical the best you will find in Gold Coast.

[prosparkautoelectrical-blog]

Maintaining your Car’s Headlight for a Safe Night Drive: Gold Coast Mechanical Services

Even if your car’s headlights work as good as new, that doesn’t mean they don’t need maintenance. Headlight serves as a crucial part of your car and a protector of your safety. Therefore, you need to make sure to keep your car’s headlights in check, so that they won’t break down in the middle of a ride. We Have Enlisted Some Tips Which Helps in Maintaining Your Car’s Headlight Use a UV Protective Film

Your vehicle’s headlight is covered with a plastic material, which is also known as lenses of the headlight. Over time you might notice a layer of yellowing or fogginess over the lenses caused by harmful UV rays. Professional Gold Coast mechanical services suggest users to use a UV protective film on the lens to protect the headlight.

Check the Light Bulb You may have a problem if the bulb of the headlight is misaligned or pointing too low or too high. The headlight bulbs must be aligned to located at the center. Some cars come with built-in bubble levellers which help you alight the headlights correctly. Make sure the bubbles are centre in the levellers or you need to readjust them.

You can check your bulbs’ aim manually. Professional Mechanics at Gold Coast mechanical services ask drivers to follow these steps:

Before starting, you need to put your vehicle at a level. Check your car’s truck and remove items which you think might be causing imbalance. Put your car in front of a plain-painted wall and bring it as much closer as you can towards the wall. Use a piece of tape to mark the centre of the area which is hit by the light beam. Make a ‘+’ sign with the tap while making sure the beam is at the centre of the sign.

While keeping the headlight ON, back up your vehicle about 25 feet and see whether the beam is still at the centre of not. If needed, you can adjust the headlight as per requirement.

Replace the Bulb If your headlights are dimmer even after cleaning the headlights, then you need to replace the bulbs. It’s natural for a headlight bulb to dim over time and lose its illumination.  

It’s better to take help from professional Gold Coast mechanical services to get your headlight fixed and aligned.

[prosparkautoelectrical-blog]

Reasons That Makes Your Car Heater Blows Cold Air Explains by Mobile Auto Electrical Service in Australia

There are several contributing to make your heater release cold air. The issue may lie around a faulty heater core. Your car blows air through a small radiator (heater core) into the cabin, which escalates the temperature of cold air and keeps the interiors of car toasty.

The core serves as heat exchangers and it’s the work of the liquid engine coolant to provide heats to it. The coolants use heater hoses as a medium to circulate heat through the core. Hot coolant is also a form of waste heat that is generated through the engine block, which makes you receive the cabin heat without any additional expenses. This is quite different than the mechanism involves in using air conditioners, which results in decreased fuel efficiency.

Don’t want to sound discouraging, but accessing the heater core requires the expertise of a professional. Since it is located in an inconvenient location like behind the dashboard, you recommend you to call a mobile auto electrical service in Australia, rather than risking it doing by self.

It might be the Coolant

If your car is running low on coolant, then it could hamper the warmth of the heater core. One more thing – coolant level required for preventing engine overheating is not the same as heating the heater core. Therefore, even if your engine overheating is in control, that doesn’t mean your coolant level is adequate. A low level of coolant can also lead to affect the cooling system thermostat, preventing coolant from circulating.

Issues with Heater core

If there is no issue with coolant, then your heater core and ancillary components might be the ones to blame. Issues with valve, leaky or clogged heater core can also block the flow of direct warm air into the interior.

Technical Issues

If your car includes an automatic temperature control feature, then you may have to get it checked. This feature helps your car maintain a constant temperature, but sometimes system malfunction can lead to fluctuation in temperature control.

Since diagnosing such issues can be critical you need the help of a professional. Last time I had such issues, I called a Mobile auto electrician near me and they reached my place and repair it on time.

[prosparkautoelectrical-blog]

Mobile Auto Electrician Near Me Explains Me About Engine Coolant

The coolant serves two special purposes – It keeps the water from freezing in winter and boiling / overheating in summer. As similar to engine oil, your coolant also requires replacement at regular intervals. Since most people don’t pay enough attention to coolants and it could be because hardly anyone likes to talk about coolants. Also, called antifreeze, coolants are usually replaced every 30, 000 miles. However, the duration for coolant replacement differs upon the make and model of the car.

It all depends upon Makes and Models

Hyundai suggests users change the coolant in the engine of a new vehicle as soon as it crosses sixty thousand miles. After that, you have to change the coolant every 30,000 miles. For Mercedes Benz, the rule is different. Some engines of Mercedes-Benz models need a coolant replacement every 30,000 miles’ while some go as long as 120,000 miles or 12 years. There also exist some models of Mercedes-Benz that goes up to 15 years or 150,000 in a single coolant replacement. Thanks to a Mobile auto electrician near me who inform that that that lifetime coolant is a sham. Most technicians sell regular coolant by the name of lifetime coolant and say that it will go as far as 30,000 miles, which is as similar to any standard coolant’s duration.

The Exception Case

The number doesn’t matter in certain circumstances. For example- if your car is prone to frequent services then, you have to change the coolant. In some situation, you might have to entirely drain and flush out the cooling system. Old cars often face breakdown and get towed most often, which increases the heat in the engine.

Get your cooling system checked by a professional today to ensure not to run into problems in the future. Don’t worry you don’t have to get your car out of the garage. Search a ‘Mobile auto electrician near me’ and fix an appointment. Pro spark Auto Electricals is a leading mobile auto inspection, repair, services and maintenance in Gold Coast and Tweed.

[prosparkautoelectrical-blog]

Experts from Gold Coast Mechanical Services Explains the Right Time to Replace Car’s Tires?

The average life of a new tire is 50,000 miles. At least, that’s what we believe, but, is it really correct?

Actually, it depends on a lot of factors. From the quality of tire to treadwear ratings, a lot of intricate factors comes into play while deciding the fate of a tire. Hope this post will help you solve most of your queries.

Unknowingly most people drive their car without checking the alignment of their car’s wheel. Lack of alignment between tires can lower their lifespan significantly. One more mistake people do is driving their car below the recommended pressure. Driving a car below pressure level not only will damage your tire but also will cost you more money in petroleum. Never forget to include tire rotation in your vehicle maintenance schedule or it will cause wear & tear to the front tires of your vehicle.

Although most brands promise 50,000 miles, hardly any tire reaches that milestone. We constantly receive complaints from clients who spend a fortune on tires but they hardly last around 20,000 miles or stays good for around 30,000 miles.

Therefore, we at Pro spark often aware of our clients beforehand rather than making false promises. We don’t claim that premium quality tires can double the lifecycle of tires, but we also don’t suggest customers choose cheaper tires as well. The tires of your car are the only components which touch the ground. Your vehicle’s tires must have the capability for high endurance.

Our specialists from Gold Coast mechanical services suggest customers buy tires with high treadwear and traction ratings. Rather than spending heavily on performance tires, it’s better to go for tires with wet tractions, low noise level and high treadwear ratings.

[prosparkautoelectrical-blog]

Power Windows Inspection by Mobile Auto Electrician Gold Coast

Do you use a crank handle to open your cars window or a simple button does the work for you? Then your answer is the latter, then your cars have power windows. Apart from convenience, car windows offer safety as you can open or close your vehicle’s windows without diverting your focus from the road.

Benefits of having power windows

Almost all vehicles nowadays come with power windows. Rolling down windows is a painful experience for users suffering from arthritis and hand injuries. Power windows ease off that issue by allowing complete control to users. Having power windows is extremely convenient and safe for people with kids. As you can Control your back windows from the font, you can roll down or up windows for your kids without getting off from your seat or losing focus from the road.

Working Mechanism of Power Windows

All power windows include an electronic motor which is connected with a worm gear. Several other gears are linked with the worm gear. When you press the button, all gears create a torque to life the window. You will find a long arm attached to a bar at the bottom of the window. When the window rises, one end of the arm slides to form a groove. A teeth-cut gear is present at the opposite side of the arm. The motor turns these gears by creating engagement with these teeth and allow the windows to open.

Why My Power Windows Stopped Working?

The most probable cause for this issue is due to overused regulators and motors. When you use your motors and regulators more than other features of your vehicles, then it may cause issues in future. A faulty window regulator, broken motor, broken cable pulley and bad window switch also causes power windows failure. If you face such issues, get it checked by a reputed Mobile auto electrician in Gold Coast.

[prosparkautoelectrical-blog]

Technicians of Mobile Auto Electrical Service Explains the Mechanism Process of Brake Controllers

If you start searching, you will end up with a significant range of brake controllers for your vehicle. To make things simple, we have divided brake controllers into two distinct groups. One is proportional brake controllers and the other is called Time Delayed brake controllers.

Time-Delayed Brake Controllers

Time-delayed brake controllers work when the driver applies a pre-determined amount of power on the trailer’s brakes. Before setting the power, the driver considers the amount of towing weight associated with the trailer. This type of braking system causes a delay when the driver applies the brakes, but, the driver can voluntarily adjust the time of the delay by making specific adjustments in the sync switch.

Most people choose this type of brake controllers as they are cheaper to purchase and easier to install. However, many technicians from Mobile auto electrical service doesn’t prefers it. Time-delayed brake controller’s durability causes more wear on the braking system, which makes them less durable.

Proportional Brake Controllers

Also known as pendulum brake controllers, the proportional brake controllers offer more control over brakes. These type of controllers come with a motion-sensing device which detects the stopping speed of the tow vehicle and allows the controller to apply the same braking power. It provides more safety because, if the trailer stops slowly, it will ensure that the truck stops at the same speed as the trailer. This type of controller is good for control especially during heavy braking. As both systems work in unison, it offers a smooth braking experience for the driver.

Simply installing a brake controller to a trailer doesn’t offer enough safety. Its depend on how much brake power you employ and if the trailer brakes are also in harmony or not. Therefore, most technicians from reputed Mobile auto electrical service recommends using electronic brake controllers. New brake controllers offer more monitoring options such as LCD screens, constant diagnosis, warning signals, multiple language support etc.

[prosparkautoelectrical-blog]

Three Signs That Says Your Car Need Immediate Custom Wiring and Installations

A Well-functioning electrical system is the prime requirement of a modern car. All essential elements of are car such as the battery, alternator, wipers, ac, etc. play significantly contributes to the functionality of your car. A single wiring or installation issue can turn your driving experience into chaos. It's crucial to get your vehicle inspected by a reliable service provider to conduct prompt actions. No car just drops dead out of nowhere. You might be receiving some signs regarding a wiring or installation failure, but you couldn’t identify it on time.

Three Signs That Says Your Car Need Services 1. Engine Doesn’t Start Actively Electricity is the main element that starts the engine of your car. The spark created by the battery ignites the fuel of your car’s engine. If your vehicle’s engine is not starting properly, it means, you have a bad battery or other electrical issues like a defective alternator, etc. if your car doesn’t start by turning the key, then it could be your battery at fault or might be an issue with the starter.

A faulty starter can also make your engine release grinding noise. The noise could also mean you have a defective flywheel ring gear. If you have an older car with high mileages, then there is a heavy chance that your electrical system needs some tuning.

2. Facing Battery Issues Usually, car batteries can run smoothly for 3-5 years depending upon the climate condition of your area. Although you are facing battery issues, doesn’t mean that you simply replace it with a new one without proper inspection. Sometimes, the main culprit turns out to be your alternator or something else.  

Therefore, its best to get your car’s Custom wiring and installations checked by a professional technician.

3. Lighting Systems Not Working Properly Your turn signal, headlights, brake lights- all rely on your car’s electrical system controls to run efficiently. Lights not only offers impeccable interior illuminations but also keeps you safe in the dark.

If you feel that, your lighting system is getting dimmer occasionally, then it could be due to charging malfunctions and low voltage. It is often caused by a dying battery, bad wiring or a damaged alternator belt.

It’s Important to get your car’s Custom wiring and installations serviced by a certified technician.