prevail-cc

[prevail-cc]

192.168.0.1

192.168.0.1 is a private IP address used to login the admin panel of a router. 192.168.0.1 is pre-specified from the router firms as the default gateway address and can be used to create various adjustments to the router settings.

How to Login to 192.168.0.1?

To login into 192.168.0.1 follow those steps --

Open an internet browser and then go to http://192.168.0.1 or kind 192.168.0.1 to the browser URL bar.

Enter the username and password in the specified fields.

You will now be logged in into the Admin Panel of the router.

Notice: If you cannot access the router admin panel at 192.168.0.1, consider using another IP address -- 192.168.1.1 or even 10.0.0.1.

Forgot IP Address Username and Password?

If you have forgotten the IP Address Username and Password or if they Aren't working then you can --

Look at the manual/box or back of router. (or assess default username and password password listing ).

In the event that you changed the password and also have dropped it or forgotten it then you need to do a factory reset. To do so, look for a tiny hidden RESET button on the rear of your router. Press and hold that button for about 10-15 seconds with a paper clip or a needle. The router will reboot and will return to default settings.

The default gateway IP address comes pre-assigned by your online service provider, however, a user may configure it par to demands. It's often changed to prevent bad men get into your admin panel, stop DDoS attacks, or simply to add an extra layer of security. Here is how to do it -- TP-Link:

Login to your default admin panel at 192.168.0.1 or 192.168.1.1 (admin/admin is username and password)

Visit Advanced settings > Network > LAN.

Under"IP Address" field you will change it to your desired address such as 192.168.1.2.

Save it and the router will reboot to use the changes.

D-Link:

Login into your router configuration page (username: admin & admin: admin/blank)

Go to Setup > Network Settings.

Now you may find Router IP Address field.

Change it preferred and Save Preferences.

Linksys:

Login to Linksys router settings page via 192.168.0.1 or 192.168.1.1 or you could access via http://www.routerlogin.net or http://www.routerlogin.com.

After logged in navigate to Advanced > from left side menu go to"Setup" > LAN Setup.

Under LAN TCP/IP Setup, you will see IP Address. Change 10.10.10.1 as favored.

Apply the machine will reboot to update settings.

In any case during the process something goes wrong, you might reset your router to default factory settings so all of customization is going to be reverted back. Protecting your WiFi system is very important to prevent unauthorized access. Follow basic principles like allowing WPA2 encryption, setting up strong password, disabling WPS adds more safety since it is an old technique of synchronization between networks, enable MAC-address filtering and upgrade your router firmware occasionally. Here is a comprehensive guide on the best way best to guard your WiFi network.