martastaylor

[martastaylor]

This is How You Should Dispose of Your Used Motor Oil

If you personally change the oil in your vehicle instead of taking it to a mechanic, one of the things you need to be careful with is disposing of the used motor oil. If you don’t do it correctly, it can be very hard on the environment. It can also make a mess, damage the …

This is How You Should Dispose of Your Used Motor Oil Read More »

The post This is How You Should Dispose of Your Used Motor Oil appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/dispose-motor-oil/

[martastaylor]

These are the Real Reasons We Can’t Let Go of Our Cars

Are you still hanging onto your old car from high school or college? Has your husband begged you to get it out of the driveway or does your wife just want it gone? Our old junk cars can be one of the sentimental items we prize the most. At the same time, they can also …

These are the Real Reasons We Can’t Let Go of Our Cars Read More »

The post These are the Real Reasons We Can’t Let Go of Our Cars appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/letting-old-cars-go/

[martastaylor]

Here’s Why You Win (and Sometimes Lose) by Buying a Car at Auction

Buying a car is an expensive and often stressful endeavor. For many, it’s one of the biggest financial decisions they make for several years, and an important investment. Going to a dealer and talking with motivated salespeople can be a challenge. Buying a car from a private party might be a little bit cheaper, yes. …

Here’s Why You Win (and Sometimes Lose) by Buying a Car at Auction Read More »

The post Here’s Why You Win (and Sometimes Lose) by Buying a Car at Auction appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/car-auction-pros-cons/

[martastaylor]

What are the Advantages of Using Recycled Parts on Your Car?

Most of us are going to be involved in some kind of a fender-bender at some point in our lives. Or sometimes we’ll hang on to a vehicle long enough to wind up needing to replace a mechanical part. When repair shops work on your car, you might assume that they’ll only use original equipment …

What are the Advantages of Using Recycled Parts on Your Car? Read More »

The post What are the Advantages of Using Recycled Parts on Your Car? appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/advantages-recycled-parts/

[martastaylor]

From Junk to Treasure: 10 Benefits of Buying from the Salvage Yard

You might have driven by salvage yards once or twice (or even all the time if you live near one). But do you know exactly what goes on at the yard? Maybe you’re aware that scrap yards buy cars. If you have an old car sitting in your garage, selling it to the yard is …

From Junk to Treasure: 10 Benefits of Buying from the Salvage Yard Read More »

The post From Junk to Treasure: 10 Benefits of Buying from the Salvage Yard appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/benefits-buying-from-salvage-yard/

[martastaylor]

Auto Auctions: How to Get in and Buy Cars Like a Dealer

Getting the best deal on a car has become something of an art for automotive aficionados. Strolling through lines of used cars at the dealership or scanning through private listings online may leave you wondering if you’re going to overpay. You also may not be too keen on negotiating the price with a salesperson or …

Auto Auctions: How to Get in and Buy Cars Like a Dealer Read More »

The post Auto Auctions: How to Get in and Buy Cars Like a Dealer appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/auto-auctions/

[martastaylor]

5 Famous Cars from Movies You Can Buy and Fix Up

Movies are a big part of our lives and often times get credited with shaping our culture. Which is why it should come as no surprise they also shape the vehicle industry. Throughout the years, famous cars from movies have formed part of our collective consciousness. Did you ever think you could own the General …

5 Famous Cars from Movies You Can Buy and Fix Up Read More »

The post 5 Famous Cars from Movies You Can Buy and Fix Up appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/famous-cars-from-movies/

[martastaylor]

How to Clean Aluminum Wheels

In the process of cleaning cars, people tend to focus on the body and windows of the vehicle, since these are the closest to eye level. Frequently, certain parts of the car get overlooked in the washing process. And one of those often-overlooked areas is the car’s wheels.

Perhaps people think because they’re so close to the ground, no one’s going to look at them, and there’s no point bothering in cleaning them since they’ll get dirty again so soon. But have you ever seen a car fresh off the lot, with new wheels? Clean aluminum wheels make all the difference, and cleaning them could even make you feel like you’ve got a new car all over again. It’s not a terribly difficult task, either, as this article will describe—just a straightforward, step-by-step process that virtually anyone can do.

With this in mind, are you looking to take your car’s aluminum wheels from grimy and blah back to gleaming perfection? Keep reading to learn more about how to do so.

TABLE OF CONTENTS

I. Why Should You Clean your Car’s Wheels?

II. What’s the Difference between Aluminum and Steel Wheels?

II. Step-by-Step Guide to Cleaning your Car’s Aluminum Wheels

IV. The 3 Best Wheel Cleaners & Polishes on the Market

V. How Often to Clean your Wheels

VI. Conclusion

I. Why Should You Clean your Car’s Wheels?

If you’re still skeptical that this is a necessary part of auto maintenance, here are a few key reasons.

First off: cleaning your car’s wheels is the only real way to deal with the notable issue of brake dust. This is the dust created when a mixture of adhesive and carbon fibers come off of the brake pad and metal shavings are ground off of the rotor. Particularly because it’s coming off hot, it’s a highly corrosive material that can lead to pitting and corrosion on your wheels. Brake dust is generated every time you drive, so it’s a constant problem that necessitates regular cleaning. Generalized road grime is similarly an issue.

Also, if you’re planning on washing the rest of your vehicle as usual, it’s a good idea to clean your car’s wheels first. Otherwise, both brake dust and dirty water might end up spattering back onto the car, undoing much of your hard work.

And that’s not to mention the fact that aluminum wheels look incredible when they’ve been cleaned and polished. Because aluminum is fairly soft (as metals go), when it’s been polished it can actually look a great deal like chrome. You’ll feel a great deal of satisfaction when you thoroughly clean and polish your wheels.

II. What’s the Difference between Aluminum and Steel Wheels?

Wheels are made with different metal blends (alloys)—the two most common materials are aluminum and steel. They have different pros and cons, and create varying effects on the driving experience, as well as requiring different methods of upkeep.

Aluminum wheels, also known as “alloy wheels,” are made up of an alloy of aluminum and nickel. Typically, these will be cast—created by putting liquid aluminum in a mold. They’re usually nicer-looking than steel wheels, and they are fairly strong while still being lightweight (so that they help with fuel efficiency). Since they’re molded, they’re able to come in a variety of designs. Both chrome-plated and bare polished aluminum wheels tend to be vulnerable to scratches and the negative effects of oxidation.

Steel wheels are made up of a mixture of carbon and iron. A con is that they’re heavier, so they may reduce acceleration and fuel efficiency. However, they’re also stronger: they are less likely to be cracked by impact, and won’t be as easily damaged by gravel, de-icers, and brake dust (thus they’re more common in winter driving situations). They’re also often easier to repair. Rather than being molded, they’re generally cut out on a press, then welded together. They offer fewer design choices, so they’re less about the aesthetics of the car’s wheel, and more about the function.

III. Step-by-Step Guide to Cleaning your Car’s Aluminum Wheels

1. Rinse the wheels

Rinse the wheels in order to remove as much grime and dust as possible as a first step. Use as high a water pressure as you can and be sure to get in every nook and cranny that you can reach—this step will save you time and effort later on, so it’s worth being extremely thorough.

2. Apply wheel cleaner

Spray wheel cleaner product to each wheel one at a time. See the list below for advice on which product to choose.

3. Add elbow grease

Using a soft brush, scrub gently to remove any stuck-on grime. As you’re doing this, make sure to keep the whole area coated with water so that the wheel doesn’t get scratched, and make sure wheel cleaner doesn’t dry on the wheel (it could leave unattractive spots).

Get in between the spokes with the brush and clean the barrel, and use a lug nut brush to clean in and around the lug nut holes. It’s important not to use an overly stiff brush, because if you scratch the wheel now it will take more time to polish those scratches away.

4. Clean the wheel wells

Use an all-purpose cleaner and a stiffer brush with a long handle to clean the wheel wells, which tend especially to accumulate dirt.

5. Rinse again and dry them off

Rinse everything you’ve cleaned so far, and dry everything using a soft towel such as a microfiber towel. If you don’t dry the wheel, you’ll end up getting water spots.

6. Clay the wheels

Detailing clay is a good tool to use to clean your car’s wheels very thoroughly, so if you’d like, use detailing clay at this point in the process, although it’s not a requirement.

7. Polish the wheels

Apply aluminum polish with a clean rag in small sections (this will keep the polish from drying before you’re able to rub it in). Start with the wheel surface and then move to the lug nuts, and rub along the grain of the wheel. You can use a toothbrush wrapped in a cloth for any crevices you can’t otherwise reach. When you’re done, wipe it clean with a clean, soft towel.

8. Seal with wax

Put wax onto a clean cloth and rub it onto the surface of the wheel. You can also use a metal sealant rather than a standard wax; whatever you use, make sure it’s OK to use on aluminum wheels specifically.

Then let the wax dry for roughly 10-15 minutes. Once you’ve let it dry, wipe it off with a clean cloth.

Your wheels should look shiny and be perfectly protected.

IV. The 3 Best Wheel Cleaners & Polishes on the Market

1. Sonax Wheel Cleaner Full Effect

This pH-balanced wheel cleaner has an interesting, user-friendly feature—the formulation turns red as it attacks dirt and grime. It’s acid-free, and is designed to be safe for use on painted, anodized and clear coated wheels. Reviewers report that it has an ideal effect on high-quality aluminum wheels.

2. Meguiar’s Hot Rims Wheel Cleaner

One of the most annoying things about cleaning wheels is that the surface is vertical, meaning that many cleaners slide or drip off before they can penetrate the many nooks and crannies that make cleaning wheels such a challenge at times. That’s why it’s so useful that this cleaner’s Xtreme Cling foam holds it in place long enough to truly dissolve any dirt and grime that’s present.

3. Mothers Mag & Aluminum Polish

We can’t forget the polish on this list—once you’ve cleaned your car’s wheels you’ll definitely want to make sure they’re shining as much as possible. This is a high-quality, easy-to-use aluminum polish that gets great reviews and is also completely affordable.

V. How Often to Clean your Wheels

It’s generally recommended that you wash your wheels with soap, water and a wash mitt every time you wash your car (perhaps twice a month).

More thorough cleanings, plus adding a layer of protective substances, can happen with less frequency—something like 4-6 times per year.

However, these are just very general guidelines. It’s up to you to look at your wheels and decide whether they’re dirty.

If, say, you’ve been driving on muddy dirt roads, you’ll have more need to wash your wheels than when you’ve been driving on regular old pavement. It’s up to you to use your judgment and decide when you feel the wheels need to be cleaned (and if aesthetics is a concern for you, it’ll of course be every time they start looking less attractive due to dirt and grime accumulation).

Conclusion

Want to make sure your wheels are maintained in good condition, and your car looks as clean and attractive as possible?

Be sure to clean your wheels on a regular basis. As you now know, it’s not an overwhelmingly challenging task by any means.

Simply use the right products and follow the steps above and you’ll be able to keep your vehicle in top condition, potentially for years to come.

A little effort now means your car will have greater longevity (you may even save money in the long run), and in the meantime it will be a pleasure to drive.

The post How to Clean Aluminum Wheels appeared first on Washos Blog.

from Auto Repair News https://www.washos.com/blog/how-to-clean-aluminum-wheels/

[martastaylor]

Junkyard Parts: How To Correctly Inspect Before Installing On Your Car

Junkyard Parts: How to Correctly Inspect Before Installing On Your Car You can save serious money if you pull car parts from the junkyard rather than buying them brand new. Of course, you’ll need to make sure those car parts work first, and that’s where we come in. Read on for our guide on how …

Junkyard Parts: How To Correctly Inspect Before Installing On Your Car Read More »

The post Junkyard Parts: How To Correctly Inspect Before Installing On Your Car appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/junkyard-parts/

[martastaylor]

How to Detail Your Engine Bay

Engine bay detailing refers to the process of removing perhaps thousands of miles’ worth of dust, dirt and grime from the space inside your car where the engine is held.

Although this may seem like a daunting or delicate process, it’s possible to do yourself with a little planning, thought and effort. The result is a clean, beautiful engine bay that looks just like new—as well as a vehicle that functions more reliably and has a higher resale value.

TABLE OF CONTENTS

I. The Importance of Cleaning your Engine Bay

II. Our Step-by-Step Guide to Detailing your Engine Bay

III. The 4 Best Degreasers for Detailing your Engine Bay

IV. How Often to Clean your Engine Bay

I. The Importance of Cleaning your Engine Bay

People often miss the importance of cleaning the engine bay of their cars, in part because it’s not the first thing you see when you look at a vehicle. In fact, most people never see it at all—so undoubtedly there are plenty of beautifully cleaned, polished and waxed cars on the road that are hiding terribly grimy engine bays. However, the engine bay gets dirty really fast.

Cleaning it makes sure that grease and dirt don’t accumulate within or surrounding components that are essential to the function of your car. Dirt tends to cause degradation of components over time—the pulleys and bearings especially are damaged by grit and grease accumulation.

The other benefit of cleaning your engine bay is that it allows you to get a better understanding of what’s there and keep an eye on any problems that may arise over time, which dirt and grime can hide. If you catch any leaks, corrosion, etc. early, you might be able to save lots of money by preventing worsening issues later on.

Additionally, a clean engine bay helps maintain your vehicle’s resale value, as it is indicative of a well-maintained automobile overall.

Note: Although this process is generally quite straightforward, you will definitely want to take extra precautions if your car is from the 1990s or any older. The particular concern is that although most of the time, electrical components are protected if they’re hit with a high-pressure flow of water it can get inside and cause problems.

So it’s a good idea to cover parts like your car’s alternator, fuse box, air intake, electrical connections/plugs, and battery terminals—plastic shrink wrap/cling film is a great choice for this kind of protection.

Note that this is not an exhaustive list of precautions you should take when detailing your engine bay. And when in doubt, ALWAYS seek the guidance of a professional for your own safety and that of your beloved vehicle!

II. Our Step-by-Step Guide to Detailing your Engine Bay

Ready to get started?

Here’s our list of 10 straightforward steps to keeping your engine bay spotless and beautiful:

1. Gather your materials

These will include, but are not necessarily limited to:

Engine degreaser

Water hose

Plastic bags/plastic shrink wrap

Bucket

Drip pan

Car wash mitt

Wash brush

Car wash soap

Absorbent pads

Terry and microfiber cloth towels

Plastic cleaner

Metal cleaner/polish

2. Give the engine bay an initial hose-down

This is an important step just to get rid of a lot of the dirt that’s on there and help the degreaser spread further.

Be sure to do this once the engine is cool—it doesn’t have to be entirely cold, but you should leave the hood up for at least an hour before you start the process.

While you’re waiting, put down some drip pans and absorbent pads so that the chemicals you’re using don’t get everywhere.

3. Protect parts from water

Cover the battery with plastic (a bag or shrink wrap). You may also want to cover the alternator, carburetor, and distributor. This will depend on what kind of car you have—whether it’s a classic or modern car, for one.

Make sure you don’t spray too much water around the fuse box and coil packs if you’ve got a modern car.

4. Add the degreaser

You’ll want to use degreaser rather than standard soap because it cuts through the oil (hence the name “degreaser”).

Apply liberally in the oiliest areas such as the oil pan and starter. Typically you will want to allow the degreaser to sit for several minutes so that it acts on the grease effectively.

A wash brush will also help get things clean, and the soft bristles won’t create any worrisome scratches.

5. Rinse again and perhaps repeat

Using low water pressure, give it all another rinse. If your engine bay hasn’t been detailed in a very long time, you may have to repeat step 4.

6. Clean again with automotive soap

Fill the bucket with soapy water and, using your car wash mitt, get everything really clean now that the degreaser has removed the worst of the oil.

7. Rinse again

Once again, use low pressure to rinse everything. Then remove the plastic bags or cling wrap from the components you were protecting, since there won’t be any more big splashes of water.

8. Polish plastic and metal parts

Polish plastic parts with plastic cleaner, applying the cleaner with your terry cloths and then removing it with the microfiber cloth. This will help to remove small scratches. And then use metal polish as the particular product’s instructions describe (they may all be different).

9. Dry things out

Use a leaf blower or pressurized air to blow out the extra water in your engine bay. Then start your engine until it reaches the typical temperature of operation.

If you turn on your car’s AC, the compressor will run as well. Do this for about five minutes so that all the now-clean components dry.

10. Optional: apply your engine dressing

This isn’t strictly required, but a spray-on engine dressing once the engine has cooled can make it look especially great. It adds shine and will round out the process of making your engine bay look absolutely as good as new.

Enjoy a car that’s now beautiful on the inside as well as the outside!

III. The 4 Best Degreasers for Detailing your Engine Bay

Choosing the right product can make this whole process a lot easier and more effective. Here are some of the best degreasers on the market:

1. Gunk EB1 Engine Degreaser

This product has been produced by a family-owned company in Charlotte, NC for 55 years. There’s a reason it’s been out there for such a long time—it’s extremely effective. It’s also cheap, but bear in mind that it smells pretty bad!

2. Meguiar’s D10801 Super Degreaser

Looking for something that doesn’t stink and—dare I say—even offers a pleasant herbal aroma? This is your pick! It’s also very effective and is super easy to use. It leaves no unsightly white residue, either, which is a major positive for this kind of product.

3. Chemical Guys Signature Series Orange Degreaser

This citrus-based formula works well on engines as well as tires, rims, tools, machinery, and other items—so it’s definitely multipurpose. It’s highly concentrated, and quickly and easily emulsifies grease, oil, dirt and grime.

4. Simple Green 19128 Crystal Industrial Cleaner/Degreaser

This is a non-toxic product that’s also unscented, fragrance-free and biodegradable. It’s a more eco-friendly option than most others, which will appeal to many. It’s all-purpose so works great for a multitude of applications. No added colors or fragrance mean it’s especially rinsable and leaves a clean, fresh finish.

IV. How Often to Clean your Engine Bay

It really depends on your circumstances—where you live, what the weather’s like, and so forth.

In general, for those who live in locations with low snowfall and low dust levels, cleaning just one or two times per year will suffice. However, drivers living in areas with harsher weather conditions (particularly locations with lots of rain, snow, and dust exposure) will want to clean their engine bay as often as every two or three months in the winter.

Otherwise, if you’re not sure how often to wash it, just check every now and then and clean it whenever it seems like the engine bay is getting dirty.

Conclusion

Now you know that the process of detailing your engine bay is not only possible, but even pretty easy, and certainly a good idea to do on a regular basis.

It will keep your car in top-notch condition, allowing it to cool more efficiently and preventing damage to components while also letting you get to know and keep an eye on your engine bay in case any issues arise.

Plus, should you ever decide to sell your vehicle, the resale value will be improved by a clean engine bay, which tells buyers the car has been extremely well-cared for.

Don’t be that person whose car looks spotless on the outside while it’s a total mess inside.

Buy a high-quality degreaser, gather up the rest of your needed materials and make sure your car is spotless inside and out.

The post How to Detail Your Engine Bay appeared first on Washos Blog.

from Auto Repair News https://www.washos.com/blog/detail-engine-bay/

[martastaylor]

How to Remove Tree Sap from Your Car

In the process of reading this article, you’ll learn why tree sap can damage to your car, and—if you’re already dealing with this issue—you will be provided with a step-by-step guide how to remove tree sap from the surface of your vehicle.

We will cover the best methods for tree sap removal, and discuss the best products on the market that you can use to remove this often infuriating substance yourself if you do decide to go the DIY route.

Although this process may seem very challenging, rest assured that selecting the right products and following our thorough guide will have your car absolutely shiny in no time.

TABLE OF CONTENTS

I. What is Tree Sap?

II. How can Tree Sap Damage your Car’s Paint Job?

III. Best Tree Sap Removal Products

IV. How to Remove Tree Sap From Your Car

I. What is Tree Sap?

Tree sap is equivalent to the “blood” of trees. It contains myriad minerals and nutrients necessary for the tree’s survival, as well as the energy that supports trees’ growth and functioning. (You may be most familiar with tree sap in the form of maple syrup, which made from the sap of maple trees—drilled from the trees and then boiled down into a concentrated and very sweet liquid.)

There are two different liquids found within trees that are referred to as “sap.” The first is xylem, which moves water, hormones, and minerals through the tree from bottom to top. The second is phloem, which is the sticky substance that contains sugars generated by the tree’s photosynthesis (used by the tree to fuel growth)—the conversion of sunlight to energy.

Phloem is the kind of sap that will cause significant frustration when it gets on your car—all that sugar means it’s basically like glue. (In fact, people have used sap as glue in the past for that very reason.)

Tree sap leaking on the outside of a tree is often a sign of disease, damage or pest infestation; this is because trees extrude sap from any wounds on their surfaces, as it functions as a kind of “scab.”

It’s incredibly easy to recognize the presence of sap on your car—it’s very visually apparent in most cases.

You’ll see transparent or red-tinted bumps on the surface of your car. And once you’ve recognized the problem, there are ways to resolve it.

Keep reading to learn how.

II. How can Tree Sap Damage your Car’s Paint Job?

Tree sap really is one of the worst things that can happen to a vehicle’s paint. It’s extremely difficult to remove and can cause more damage than just about any other contaminant.

People often park their cars under trees to benefit from the shade they offer, but the potential effects of the sap that can drip from trees make this a bad idea all around.

Pine sap is exceptionally sticky and problematic. Sap drips onto the car, then “bakes” in the sun to solidify into a resin-like substance. It then eats away at the car’s clear coat and paint, so that every bit of sap has an area of damage around it. It’s almost impossible to wash off using standard car washing techniques, and cleaner waxes, and spray cleaners, and even solvents may be unable to remove this dried-on sap.

The damage that can accrue can be very costly, so it’s important to nip the problem in the bud before it becomes too overwhelming. The longer you leave sap on your car, the worse the paint damage will get.

III. What is the difference between Car Wax and Car Polish?

Before we go any further, let’s make sure that it’s understood that car polish and car wax are two very different things.

Car polish is used as a remedy. Polish removes the dirt, grime, grease, and scratches that are left behind after a good washing. Solvents within the polish allow it to remove, or at least reduce, impurities on the paint surface and will bring out the shine.

Car polish should be used in a multistage process of caring for your vehicle’s paint because, while it can make your car look great when finished, it does not seal or protect the paint. Waxing is the only true way to protect your car’s paint and should be completed after the polishing step.

III. Best Tree Sap Removal Products

These are some of the most powerful, effective products on the market for removing tree sap from your automobile and protecting its paint job:

1. Turtle Wax Bug and Tar Remover

This spray-on foam clings thoroughly to wide areas and works beautifully to dissolve not only sap but also tar and bugs. It functions as a pre-wash or spot cleaner and is formulated to be entirely streak-free. It can be used on paint, glass, metal, and plastic. It sprays as a foam, then becomes a liquid, which can be wiped or washed off leaving a sparkling clean surface with no residue.

2. Stoner Car Care Tarminator Bug, Tar, Sap, and Grease Remover

This spray uses MicroActive cleaning technology to quickly dissolve and break down sap (in less than 30 seconds) as well as bugs, tar, and grease on the surface of your car. It’s also specially designed to work on chrome and paint surfaces without damaging the finish of either material.

3. Swan Isopropyl Alcohol, 99 Percent

Some people say that high concentrations of isopropyl alcohol work better than any other substance to dissolve stuck-on sap. Better yet, it’s easy to find and has many different uses. If you’re thrifty and prefer a straightforward, versatile product, this is a great choice.

IV. How to Remove Tree Sap From Your Car

People will recommend plenty of methods to clean tree sap off of your car. But read on, because we’re offering you what we believe is the absolute best method for doing so.

1. Gather your supplies

You’ll need the following supplies, so make sure you have them all before you begin:

Clean, soft towels or terry cloths

A box cutter blade (for use on glass only—use this if you have sap on your car windows)

Sap remover solution (such as Bug and Tar Remover) or rubbing alcohol

Bucket of water

Sponge/wash mitt

Spray wax/quick detailer polish

2. Wash and dry your vehicle as usual

Use soap and hot water to clean your car, then dry it all off. By washing and drying your vehicle, you ensure that the steps that follow are as practical as they can possibly be.

If you get fortunate, you might even be able to remove the sap with this step, assuming it’s not terribly stuck on.

Additionally, washing your car before removing the sap means you’ll be able to see where all the sap is, and you’ll derive a lot more satisfaction from having a spotless car when you’re done with this process.

3. Locate the spots of sap

As we mentioned, the sap spots will be visible as typically hardened, clear or reddish raised areas. If they’ve been there for a while, they may have begun to eat into your car’s paint job and may also be surrounded by the areas of deterioration that are typical of the long-term presence of hardened sap.

4. Apply sap remover solution (or rubbing alcohol) to the sap spots

Now that you know where the sap is located, you can get into the nitty-gritty of removing it. Pour several drops of sap remover solution (such as Bug and Tar Remover) onto a clean washcloth or terrycloth.

If you don’t want to purchase this product, you can also try using rubbing alcohol, although it’s not designed for this purpose. Place the cloth on the sap and press it onto the area for a minimum of 30 seconds to one minute (the pressure will help the remover to soak into the sap).

After allowing the solution to work, you can begin to use some elbow grease to rub the sap away. Make sure you do so gently because otherwise, you can spread the sap around on the surface of your car, creating a more significant problem.

If the sap is really hardened on and isn’t coming off, you can repeatedly soak the area with more solution or rubbing alcohol, then manually rub it away, until you’ve gotten rid of it all.

5. Remove sap from your windshield/windows

If the sap got on your windshield or windows, first thing’s first: do not use your windshield wipers on fresh sap! It will just spread it around and leave you with messy streaks that are difficult to remove. Instead, you can follow the same steps above.

You can also use a box cutter blade to remove the most hardened pieces of sap from the glass. Just be careful, as these blades are quite sharp.

And be sure to keep the blade flat along the surface of the glass so that you don’t create scratches, which are quite unattractive and can impede visibility over time.

6. Finishing touches

Once you’ve gotten all the sap off of your car’s paint job and windows, spray quick wax onto the paint and clean it off with a detailing cloth. This will leave your car looking good as new with a beautiful finish.

The wax will make sure that the paint and clear coat are thoroughly protected, and that future damage is less likely.

Conclusion

Now that you’re aware of why sap is such a common problem—and one that can potentially ruin your car’s paint job if left too long—it’s a good thing you also know that it’s completely possible to fix.

Your car won’t be permanently stuck with patches of dried on resin; all you need is some essential products, time, and elbow grease, and you can save your car’s paint job and windows from the effects of sap.

And in the future, be sure to avoid parking under trees, and keep an eye out for any new patches of sap, since the longer they sit there, the harder they’ll be to remove.

The post How to Remove Tree Sap from Your Car appeared first on Washos Blog.

from Auto Repair News https://www.washos.com/blog/remove-tree-sap/

[martastaylor]

How to Remove Mold from Your Car

We will describe the risks of mold exposure and the importance of preventing mold growth, while also providing a step-by-step guide on how to remove mold from your car. If you’re unlucky enough to already have developed this major problem, don’t worry!

While it may seem like an insurmountable challenge, in fact with the right supplies and with some elbow grease you can restore your car to the safe, clean, comfortable vehicle you deserve.

I. What is mold, and Why is it Dangerous?

Mold is a type of fungus that typically forms in the presence of higher temperatures and high levels of moisture. Exposure to mold can cause major health issues, especially in those who are sensitive to it.

Those who are most susceptible to the effects of mold include those with lung diseases, allergy sufferers, and those with compromised immune systems (e.g. those receiving treatment for cancer, who have had an organ transplant, or who are taking immunosuppressive medications).

The presence of mold can lead to respiratory and skin irritation, lung infections, asthma, and other health challenges. Symptoms can include nasal congestion, wheezing, eye and skin irritation, fever, and shortness of breath. That’s why it’s extremely important to avoid exposing yourself to mold, especially somewhere you’re likely to spend as much time as your car. (And to make sure you never leave your car out in the open if the top is down!)

Luckily, if you notice mold—typically noticeable due to a strong odor, but also potentially visible patches of mold—there are steps you can take to fix the problem. Keep reading to learn how to protect yourself from mold in your automobile.

II. How to Remove Mold

There are, of course, numerous methods to eradicate mold from your car, and everyone will recommend something different. But here’s what we think is the best way to do it.

1. Protect yourself

Always make SURE that you are wearing a surgical face mask or particle mask as well as strong, non-porous household cleaning gloves (make sure they’re solid enough not to break). This will decrease the likelihood of harmful, excessive exposure to mold and its possible toxins.

2. Air out your car in a sunny spot

Sunlight and fresh air are pretty powerful tools in the fight against mold. Like virtually all types of fungi, mold grows in moist areas, so the combination of sun and fresh air dries things out and makes it impossible for mold to survive.

Ideally, on a clear day, move your car to a sunny parking spot and open up the doors and windows (and sunroof, if there is one). Give it a few hours and let any dampness dry out. (Just be sure to keep an eye on the weather—you’ll be giving yourself even more of a problem if a sudden shower appears and your car’s interior is exposed to the elements!)

3. Inspect your car

It’s a good idea to look all throughout your car to get a sense of where the mold is an issue, so you can focus on particular areas in the later steps. Make sure to look at the following: surface of the seats, underneath seats, steering wheel, floor, seat belts, and seat side seams.

Mold can vary in color, so just look for (typically circular) areas of black, green, white, gray, or brown. That’s how you’ll know where you need to focus your cleaning efforts.

4. Prepare before disinfecting

Try to break up patches of mold by gently brushing them with a toothbrush. Then, if you’re lucky enough to have access to one, use a wet-dry vacuum cleaner to vacuum up the mold you’ve just brushed up. (If you can’t get your hands on a wet-dry vacuum, that’s OK—this step is helpful but not essential).

5. Spray with disinfectant solutions

Take out your car’s seat covers and carpets. Before you wash them, you can use any of the following mixtures to kill mold in these sections of fabric:

4 parts white vinegar and 1 part water

1 quart of water, ½ cup of white vinegar, ¼ teaspoon of clove oil, and 1 tbsp of baking soda (note: avoid exposing skin directly to clove oil—it can cause dermatitis and irritate skin and mucous membranes)

Pour either of these mixtures into a spray bottle and spray it on your car’s seat covers and carpets. They should sit on the material for at least 20 minutes—or even longer—in order to ensure that the potent ingredients are able to fully kill the mold and prevent its regrowth.

You may also want to spray other parts of your car where mold has been able to infiltrate and cause odor (including as the dashboard, air vent, steering wheel, and seats).

Stains on the seats, seat covers, and carpets can be removed by sprinkling good old Borax powder on them (yes, it’s useful for so many purposes!), waiting at least 10 minutes, and then sweeping or vacuuming the powder away.

6. Remove the leftover residue

Once the mold has been killed, you can use a wet-dry vacuum to vacuum up the liquid solution. Otherwise, you can wait for the areas to dry and then use a regular vacuum to vacuum up the dried-up mold residue. If you use a regular vacuum, make sure you use one with a bag and then throw the bag away afterward. Otherwise, you’ll be spreading mold spores when you bring it inside to clean your home.

7. Wash your car’s seat covers and carpets

Now that you’ve thoroughly disinfected them, you can use standard detergent to wash your car’s seat covers and carpets. If possible, add Borax powder when you wash them and allow them to dry in the sun if it’s a sunny day (as we said, the sun is incredibly helpful for this process).

If for whatever reason you can’t wash them with detergent, an alternative is to spray them thoroughly (really all over, so that the mold spores are killed) with a solution of water and non-iodized salt. Then allow them to dry in the sun, and wait for the salt to form a crust on the surface, which you can brush or vacuum off.

Salt does a great job getting rid of mold—it dries it out thoroughly and kills it.

8. Optional: use an air freshener spray to remove leftover odors

If you’re bothered by the residual smell of vinegar (which will disappear as the liquid completely evaporates), you can use an air freshener spray to ensure everything smells fine.

Most important is to air everything out—that’s what will leave everything smelling good.

9. Replace the seat covers and carpets, and keep the mold from coming back

Once you’ve washed and dried the seat covers and carpets, it’s time to put them back in your car.

And here’s a key takeaway: since mold requires a wet environment to grow, you can prevent its return by ensuring your car is dry and that it remains totally dry. This is the most important part of preventing mold re-growth.

You can use a dehumidifier to lower the overall moisture levels in your car.

III. Best Car Air Fresheners

If, after cleaning, you decide you’d like to use an air freshener to ensure your car smells absolutely perfect, here are some of the best commercial products to use:

1. Moso Natural Air Purifying Bag

Here’s one all natural option—a linen bag full of pure bamboo charcoal! Activated charcoal is amazing for absorbing moisture and odor. In order to keep it functioning, all you have to do is leave it in the sun to dry (with all the moisture having been absorbed).

It lasts for two years, and then you can open up the bag and use the charcoal as fertilizer for plants. So it’s eco-friendly from start to finish, and won’t expose you to any toxic chemicals whatsoever.

2. Turtle Wax 50819 Power Out! Odor-X Kinetic Whole Car Blast

This is a high-powered canister deodorizer that “seeks and destroys odors at the molecular level”—and does so for up to a month. It can be used underneath seats, on the inside of air vents, and in carpet fibers.

It’s also a pretty great value.

Customer reviews report it’s incredibly effective and easy to use. Note that the initial smell of the product is strong, but the chemical smell will dissipate over time leaving no odor in its wake.

3. Ozium Smoke and Odor Eliminator Gel

This is a gel deodorizer that’s not designated specifically for cars, but also for home and office. It comes with a twist top that allows you to choose the level of odor control.

The product itself has a slight citrusy odor but nothing too strong. It’s a solid product that’s easy to use and very affordable.

4. Chemical Guys New Car Smell Premium Air Freshener and Odor Eliminator

Love the smell of a new car?

This product is engineered not only to eliminate odor from your vehicle but also to add that amazing new car smell (thankfully without the associated toxic chemicals that are part of the real new car smell).

It’s also so concentrated that it can be diluted with distilled water and still work.

And amazingly, all you need for your entire car is one spray.

5. Meguiar’s G2316 Odor Eliminator

Here’s another super-effective spray that gets high customer ratings. It’s a great choice for cars and trucks as well as in the home.

The effects are immediate with a spray as opposed to a gel (which works more gradually over time). That means use of this spray means pretty much instant odor elimination.

Nothing fancy, no frills—just a really effective product for odor removal.

Now you know that, as worrisome or even scary as the prospect of a mold-infested vehicle can be, there are options to address the problem. All it takes is some time and effort, with attention to safety (wear a mask and gloves!) and your vehicle can be good as new.

You can even use natural products like vinegar and clove oil solutions to do the work for you, if that’s a priority. And once you’re done, of course it’s important to keep your car dry, so that you don’t have to go through the trouble of cleaning out the mold again in the future.

The post How to Remove Mold from Your Car appeared first on Washos Blog.

from Auto Repair News https://www.washos.com/blog/remove-mold-from-your-car/

[martastaylor]

Common Auto Repairs & What to Do About Them

If you keep up with basic maintenance on your vehicle, you can avoid the most common repair items, or at least delay them.  Here are the 12 most common auto maintenance and repair items. The 12 Most Common Vehicle Maintenance and Repair Items Engine oil change Oil filter change Replacement of windshield wipers Air filter changed …

Common Auto Repairs & What to Do About Them Read More »

The post Common Auto Repairs & What to Do About Them appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/common-auto-repairs/

[martastaylor]

How to Find the Best Car Wash Near Me

In this article, we’ll describe the most common types of car wash (specifically at-home, hand, drive-through, self-service, and mobile car washes). You’ll learn about the pros and cons of each kind of car wash, as well as how best to find a car wash near me.

It’s important to make the right decision for particular needs, as you might otherwise end up spending too much money, paying for a wash that’s not thorough and leaves your car dirty, or even damaging your car if it’s a really bad car wash.

Luckily, by the end of this article you’ll be well-prepared to find the right car wash option for your vehicle and budget, helping you keep your car in beautiful, sparkling clean, tip-top shape.

TABLE OF CONTENTS

I. At-Home Car Wash

II. Hand Car Wash

III. Automatic/Drive-Through Car Wash

IV. Self-Service Car Wash

V. Mobile Car Wash

VI. How to Find the Best Car Wash Near Me?

I. At-Home Car Wash

Among all of the various types of car washes, washing your car at home by hand will definitely take the most time, but it may be worth it to you depending on your priorities.

This process method involves the following steps: rinsing all dirt from the outer surface of your car; washing the car with warm water; drying with a chamois leather cloth (focusing on getting rid of noticeable streaks); and then applying a good-quality protective car.

There are a couple of details to watch out for. First, when you dry your car, don’t dry it in the sun; you’ll get sunspots, which will ruin the look of your car. Second, when you apply the wax, make sure you don’t do so right in direct sunlight.

If you don’t have a hose and a driveway, and/or the numerous supplies necessary to wash your car at home, you may also consider going to a self-service car wash. There you’ll be able to complete the process using their supplies.

Pros:

Probably the most affordable option

Relatively convenient

Cons:

Labor intensive

The most time-consuming option (takes about 2 hours, typically)

You’ll need to buy quite a bit of equipment

May cause damage to your car

Impossible if you don’t have a hose and a driveway or other spot to clean your car at home

II. Hand Car Wash

Let’s say you want the high-quality, detail-oriented touch of a hand car wash, but you don’t have the time, supplies, or energy to wash your car yourself. Instead, you can have your car washed by a hand washing service.

Unsurprisingly, this will be the most expensive option; however, you’re paying more for a reason, as you’ll almost certainly get good results (assuming you go to a reputable location). You’ll also end up saving yourself time and energy, and for lots of people, that’s more than worth the cost trade-off.

You’ll also find that many hand car washing services also give the option to include their valeting services in your service, so that you can get your automobile’s interior cleaned at the same time.

One thing to be particularly aware of when choosing your hand car washing service: make sure that whichever service you choose is completely insured. Ultimately: hand car washes are the right choice if you’re looking for visually appealing results and don’t mind paying a very high premium for them.

Pros:

High-quality, thorough results

The possibility of valeting services to have your car’s interior cleaned simultaneously

Cons:

This is the most expensive option

Pretty time-consuming if you have to wait around

Less convenient than hand washing your car at home

III. Automatic/Drive-Through Car Wash

An automatic car wash is the quickest method for washing your automobile. It’s also typically the cheapest, after washing your car at home. Lots of gas stations offer this kind of car wash, so it’s typically a very convenient option.

To use this kind of car wash, you put your car into neutral and are pulled through a conveyor while brushes, hoses, and blow dryers wash your car. However, despite the convenience of an automatic car wash, there’s a major downside: using this kind of car wash means a pretty high risk of damaging your car’s paint job.

Automatic/drive-through car washes use brushes with very stiff bristles, which are prone to creating tiny scratches in cars’ paint. These minuscule scratches collect dirt and grime, which ends up making your car look dingy and faded over time. Even more alarmingly, larger scratches can actually allow your car to rust—a major problem. Those who are concerned about protecting the appearance and quality of their car should really avoid these types of car washes.

Pros:

Very fast

Affordable

Easy

Convenient, especially because they’re often available at gas stations

Cons:

Doesn’t offer a very thorough cleaning

Can cause considerable damage to your car’s paint work

There can occasionally be difficulties with drying the vehicle

IV. Self-Service Car Wash

Self-service car washes are similar to at-home car washes since in both cases you’re the one doing the work to clean the car. However, self-service car washes are an option for those who don’t have a hose, driveway, and/or the numerous supplies required to clean your car (for instance, those who live in apartments with no garages).

They allow you to, instead, drive up and park your car, spray it with a powerful hose, cover it with soap suds, rinse it off, and then dry the car. Then you can apply protective car wax as needed.

With this car wash option, you get the affordability and overall control of washing your car yourself—but you don’t have to worry, for instance, about buying or storing supplies.

Pros:

Allow you to clean car yourself if you don’t have the facilities or supplies to do so

Great option for those who want to have control over the process of cleaning their car and do a very thorough job

Cons:

You’re paying to have a clean car, but you’re still doing all the work yourself—ultimately, you’re paying for the opportunity to clean your own car

Depending on your skill and experience level, you might not end up doing a particularly good job

Time-consuming

Not very convenient, since you have to go elsewhere to

V. Mobile Car Wash

Mobile car washes are a pretty revolutionary option. They involve having a professional washer come to you and clean your car, by hand, from start to finish. It’s basically a mixture of the best aspects of an at-home car wash as well as of a hand car wash service: you get the convenience of an at-home car wash, but also the high-quality, detail-oriented work—and ease—of a hand car wash service.

Additionally, mobile car washes often involve cleaning both the interior and exterior of your car. They’re a great option to consider if you’re looking to have a spotless car, inside and out, and want to save time and effort to do so.

Pros:

With meticulous attention to detail, your car will be incredibly clean and look as good as new

Extremely convenient, since you barely have to leave the house

Saves your time and energy

Low risk of damage to your car, particularly as compared to an automatic drive-through car wash

Cons:

Can be expensive (but that makes sense, considering the high-quality result you’ll receive)

VI. How to Find the Best Car Wash Near Me

When you’re looking for the right car wash for your car, you shouldn’t just drive into any old car wash you notice as you’re, for instance, driving home from work. Instead, make sure you do your research into the various car washes in your area and get a sense of their reputation.

It’s important to do this not just because you don’t want to waste money on a car wash that doesn’t really get your car fully clean, but also because a really bad car wash could actually cause severe damage to your car (including scratches to the paint job that can cause your car to rust and shorten its overall lifespan).

A great way to find a reliable, high-quality car wash is to check out what’s available in your area on Yelp, a site that aggregates reviews from real people. Just enter your town/city’s name or zip code on the site’s main page, and you’ll be able to browse by price and sort by distance, highest/most reviewed, whether the location is open at a particular time, and even features like whether the car wash accepts credit cards. When you do you’re doing your research, make sure you understand what is included in the price of each service offered.

Car wash options like automatic/drive-through and self-service are pretty standard; if you’re looking for a quick, cheap option and aren’t too concerned about the quality of the wash, you might as well go with that. However, if you take the time to invest in a car wash, it will do wonders for your car and its eventual resale value—and maybe even for your mindset.

Driving around in a clean car–one that smells clean and looks sparkling new– is a truly satisfying feeling, and it’s one that’s worth the extra investment for many people.

The post How to Find the Best Car Wash Near Me appeared first on Washos Blog.

from Auto Repair News https://www.washos.com/blog/car-wash-near-me/

[martastaylor]

Should You Sell Your Car for Parts or as One Piece?

You’ve decided your car has reached a point where it’s only good for parts. It’s not worth trading in to a dealer or trying to sell privately because it’s in rough shape. Once you’ve decided the time has come to junk your car, then it’s time to decide how. The easiest solution is to sell …

Should You Sell Your Car for Parts or as One Piece?Read More »

The post Should You Sell Your Car for Parts or as One Piece? appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/recycle-whole-or-piecemeal/

[martastaylor]

12 Shocking Statistics About the Car Wash Industry That You Need to Know

The car wash industry is incredibly dynamic. This is an industry that’s been growing and changing considerably in recent decades, and consequently, it’s filled with exciting opportunities for entry and innovation.

You’ll probably be shocked to learn, for instance, just how much revenue car washes generate each year, both within the United States and globally. Likewise, you’re likely to be surprised by how many owners of car wash businesses have only recently entered the industry. As the number of cars on the road continues to increase precipitously, we can expect even more demand for car washes and auto detailing. Read on to learn more about some of the most mind-boggling statistics backing up these noteworthy trends, and perhaps to gain insight into your own ideal point of entry into the car wash industry.

1. The car wash industry has been experiencing considerable growth, both short- and long-term.

The growth that’s being seen in the car wash industry is notable. In 2012, for instance, 2.1% more cars were washed than in 2011. (That may not seem like much, but consider that in five years a continuation of that trend would amount to a more than 10% increase.) (Source: Brandon Gaille) Likewise, on a longer time-scale of almost two decades, there have also been major increases in the industry: more than 19.2% more consumers used a car wash in 2014 than did consumers in 1996. (Source: Big Man Washes)

2. This growth is predicted to continue—industry revenue growth for the car wash and auto detailing industry is forecasted at an average yearly rate of 3.3% up to 2018.

There are multiple factors behind this trend. First, consumer discretionary spending—in other words, purchase of non-essential, but typically desirable goods and services—is expected to climb. Second, sales of both new and used cars reflect the likelihood of growth in the related car wash industry—more cars on the road means, of course, more need for car washes. Third, professional car washes will be sought out by those with increasing environmental awareness, because car washes use considerably less water than home washing—potentially reducing water use by more than two-thirds. (Sources: Big Man Washes & San Diego Car Care)

3. In the United States alone, there are 16,000 car wash establishments, whose yearly revenues add up to a shocking $9 billion.

For the sake of clarity, the term “establishments” refers to both single-location businesses and individual locations of businesses with multiple locations. Additionally, these are businesses that do the following: cleaning, washing, and waxing for all kinds of vehicles, not just standard cars. When you start looking at this at a global scale, the numbers are even more striking, as there are a total of over 150,000 car wash locations worldwide. (Source: Dun & Bradstreet)

4. There’s plenty of room for new businesses to get in on the action in this growing industry.

Luckily, this isn’t an industry that’s dominated by a few big chains. On the contrary, the vast majority of car washes are owned by small business owners—90%, to be exact. This suggests that it’s an industry that doesn’t require a massive initial investment to enter. And keep reading to find out just how incredibly lucrative it can be. (Source: Brandon Gaille)

5. Plentiful opportunities for entry into the car wash industry are also bolstered by the fact that it has very low capital intensity relative to other industries.

Capital intensity describes the degree to which businesses require high-cost investments in fixed assets to produce goods and services. As of 2012, business owners in the car wash industry spend an average of $0.11 for each dollar they spend on labor. This is because manual labor makes up a major part of the service of car washes, and the average car wash establishment has about 9 or 10 employees. Being a business in a less capital-intensive industry means you’re less likely to experience high levels of depreciation (decreases in the value of your assets as time passes). (Sources: Detail Xperts & Investopedia)

6. Roughly 38 gallons of water are used each time a single car is washed.

That’s a major environmental impact, especially when you consider that daily, an estimated total of about 8 million cars are washed at car washes. That adds up, in fact, to about 304 million gallons of water used for car washes per day, globally. This suggests that there’s room in the industry for green, eco-friendly car washes that would provide the same services while reducing costs to the environment—that niche is definitely something new businesses should consider. (Source: Brandon Gaille)

7. As a result of these factors, there are lots of new car wash owners in the industry, many of whom are experiencing considerable success.

As of 2012, the International Carwash Association states that 37% of car wash owners have owned their businesses for five years or fewer. And they’re potentially making big profits: a survey by Auto Laundry News shows annual profits of anywhere from $55,000 to $100,000 for self-service car washes; meanwhile, full-service businesses can rake in yearly profits of $500,000 to $900,000. (Source: Detail XPerts)

8. The annual revenue of the car wash industry adds up to $48 billion.

Keep in mind that that number also includes gas purchases, as about 65% of car wash locations are savvy enough to also sell gasoline. You might not guess that this is such a lucrative industry when you learn that the cost of a typical car wash averages a measly $15. But these earnings add up to the mind-blowing number of almost half a trillion dollars. (Source: Brandon Gaille)

9. Car washes for heavy users make up 66% of total car washes.

Here, “heavy users” refers to those who use a car wash at least several times per month. They are 28% of total car wash users. (Consumers say their main reason for going to the car wash more often is that it offers positive emotional rewards, making them feel happy.) Meanwhile, 47% are medium users—who go every couple of months—and their washes make up 29% of all car washes. Finally, the 1/4 who are light users (going every 6 months, or less frequently) end up paying for a measly 5% of all car washes. (Source: Big Man Washes)

10. The majority of car washes use in-bay automatics.

There are numerous types of car washes, but the most commonly used are in-bay automatics, which make up just over half (51%) of all car washes. In-bay automatic car washes often involve driving through a conveyor system in which brushes clean your car and high-powered blowers dry it. The next most common are self-serve car washes (wherein the driver uses a high-pressure hose to clean the car themselves), which are 32% of all car washes, and then exterior conveyor washes (where drivers remain in the car as the car moves along an automatic conveyor), at 9%. Finally, full-service car washes are the least common (primarily because they involve hiring attendants who wash the vehicles), constituting only 8% of all car washes. (Source: Focused Car Wash)

11. 72% of consumers who have their cars professionally washed will only do so every couple of months, or even less.

Looking at the frequency of car wash usage, 47% of consumers get their car washed every couple of months, while 20% do so twice a year and 5% only once a year. On the other end of the spectrum, 24% of car wash users will do so more than once per month, and 4% actually visit car washes once a week or more! In surveys, the main reasons consumers give for not getting their cars washed more often is that it’s too expensive or that it’s too time-consuming. (Source: Big Man Washes)

12. Interestingly, and perhaps unexpectedly, winter is the most popular season for car washes.

This may be a surprise because you’d think people wouldn’t want to get their car wet when it’s cold or even freezing out. However, 32% of car washes happen during the winter. Spring and summer are tied for second place in terms of popularity, with each garnering about 25% of all car washes. Finally, fall is considerably less popular, with only 18% of car washes happening during that season. On average, car wash establishments can expect high traffic in the winter and nearly half as much traffic in the fall. (Source: Brandon Gaille)

As these 12 statistics profoundly demonstrate, the car wash industry is much more significant and value-generating than most people realize. You may actually be able to take advantage of this widespread lack of awareness by gaining access to its underappreciated, yet potentially huge profits.

The post 12 Shocking Statistics About the Car Wash Industry That You Need to Know appeared first on Washos Blog.

from Auto Repair News https://www.washos.com/blog/statistics-car-wash-industry/

[martastaylor]

How Much is My Car Worth?

“How much is my car worth?”  We get that question often and since we purchase thousands of cars each month, we know a thing or two about the car appraisal and car buying process. But it’s not as easy to give you a ballpark value number as you might think. In fact, there are a …

How Much is My Car Worth?Read More »

The post How Much is My Car Worth? appeared first on Junk Car Medics - We Buy Junk Cars for Cash.

from Auto Repair News https://www.junkcarmedics.com/blog/how-much-is-my-car-worth/