mark-setup-guide

[mark-setup-guide]

Installing the Ex6110 using Wireless Protected Setup ( W.P.S ) method is one of the easiest and quickest ways to connect your booster to the existing wifi system. For setting up your Netgear AC1200 follow the below-given instruction to install the booster

Plug the booster into a power outlet and wait for the power LED to become solid green.

Use a Wi-Fi client (wireless computer, smart phone, or tablet) and connect to the NETGEAR_EXT wireless network (SSID).

Note: You can also use a wired computer to install the booster. Use an Ethernet cable and connect between the computer and the booster Ethernet port.

Once the wireless client is connected to the booster network, the Device LED will turn on.

Open an internet browser and go to http://www.mywifiext.net.

Click NEW booster SETUP.

Complete the booster Setup screen and click NEXT.

Select the Wi-Fi network that you would like to extend and click NEXT.

Enter the wireless Password (network key) then click NEXT.

Enter your preferred network name and security settings. Click NEXT

Connect your wireless device to the booster and click Continue.

Your booster is now configured as a wireless range booster. Click Next to proceed with the registration.

Click Finish after completing the registration.