linksys-extender-setup

[linksys-extender-setup]

Linksys Wifi Extender Blinking Orange? Here's the Fix

Is your Linksys extender blinking orange? This might be because of the outdated firmware or a bad network strength from your router. Take your device close to the router and reboot it. After that, login to the extender using extender.linksys.com and go to the Firmware Update page. Click Update to start the process.

[linksys-extender-setup]

How to Reset Linksys WiFi Extender?

How to reset Linksys extender through the reset button?

Resetting Linksys extender has a lot easier with the help of two methods, that are, web interface and push button. If you want to reset Linksys extender through the web interface, then you can do that via the default web address. The default web address of a Linksys wifi extender is extender.linksys.com. You don’t have to be connected to the internet for Linksys extender reset. 

Before you learn how to reset Linksys wifi extender, there are a few things that you need to know. Resetting Linksys extender brings your device back to the default factory settings. Default settings are the original settings of your Linksys wifi extender.

What is Linksys range extender reset?

Resetting the Linksys range extender brings your device back to the default factory settings. In other words, when you make your device restore the factory default settings, all the wireless connections, network logs, passwords, and other configured features get erased. Basically, the device gets back to the original settings with which it was supplied to you.

There are two ways through which you can learn how to reset Linksys range extender. You can easily reset Linksys range extender through the push button and web interface. 

If you have been trying to learn how to reset Linksys extender, this is the easiest way to do it. Let us tell you how! All you have to do is just press the button. The button that will help you in resetting Linksys extender generally sits a little inside the frame of the extender. 

It is impossible to press the button with your finger. You would require a toothpick or a paperclip to press the reset button of your Linksys extender. The instructions are given in the subsequent section that you need to follow in order to reset Linksys extender to the factory default settings.

Linksys Wifi extender reset 

To reset Linksys extender to the factory default settings, first, you need to locate the reset button on your device. 

Once you locate the device, take a toothpick or a pin in your hands.

Now, press the reset button of your Linksys extender.

Hold the reset button for at least 7 seconds.

Now, you will see the lights on your extender blinking.

At this time, you need to release the reset button of your wifi range extender. 

After that, give your extender a few minutes to restore the factory default settings. It will take approximately 2 minutes for your device to get back to the original settings. You may need to reconfigure your range extender once it restarts. To configure the extender with your router’s network, make sure you refer to the setup instructions.

NOTE - Please make sure you do not turn off the device or unplug it from the power outlet whilst it is in the middle of the reset process. This may cause some permanent issues on your device that will require technical help to fix afterward. 

Conclusion

So that was all about the Linksys extender reset instructions. It is super easy to reset Linksys extender to the factory default settings using the push/reset button. We hope you liked this post and it helped you learn how to reset Linksys Wifi extender. In case you encounter any errors or need further assistance, kindly reach out to our support team. Our technical support team of professional networking geeks brings years of expertise in resolving networking issues on various devices.

[linksys-extender-setup]

How to Setup Linksys Extender Using http://extender.linksys.com?

Setting up a Linksys extender requires you to configure your range extender’s settings with the main router’s network. It becomes easier with the help of the default Linksys login address http://extender.linksys.com. If you want to set up a Linksys extender locally with the help of the default URL, kindly follow these instructions carefully.

First of all, you need to plug your range extender into the power outlet. 

Power On the range extender and ensure that the main router is also powered On.

Now, open a web browser on your PC and type http //extender.linksys.com in the URL bar. 

After that, the browser will take you to the Linksys extender login page. 

Now, enter the default Linksys extender password and username in the respective fields. 

Click on the Login button and wait while you are redirected to the Linksys extender dashboard. 

Now, go to the Setup and let your device scan for all the active wifi networks around you. 

Locate your home network and click on it.

Now, you will be prompted to enter the wifi password of your network.

After that, finalize the settings of your Linksys extender. 

Once the device restarts after the setup process, you can unplug the device and place it anywhere. 

NOTE - We recommend you place your Linksys wifi extender in a place where your main router’s network could not reach previously. Make sure the range extender is not placed too far from the router. 

Now that you have successfully set up the Linksys wifi extender, make sure you learn the steps. We hope these instructions helped you learn how to setup my Linksys extender. If you encounter any error in the middle of the setup, make sure you get in touch with our support team. 

[linksys-extender-setup]

How to Fix Linksys RE6500 Blinking Orange Light?

Linksys Extender RE6500 Blinking Orange Light - Troubleshooting Steps

Linksys extender RE6500 blinking orange light? Not to worry! Most users may come across this issue if the Linksys extender encounters any technical issues. There are numerous technical glitches that your device may encounter during its lifespan. These are two of the most common reasons that make Linksys extender blinking orange light.

In this post, we will understand the reasons behind the Linksys RE6500 blinking orange. Make sure you read this post until the end in order to avoid missing any useful info. So let’s get started with the reasons first.

Linksys RE6500 Blinking Orange - possible reasons

In this section, we will discuss the main reasons why you may think why is my Linksys RE6500 extender blinking orange.

Linksys wifi extender RE6500 fails to connect to the router.

The extender is placed very far from the main router.

There are a lot of interruptions around your router. Therefore, your router may be unable to reach the extender.

The firmware of your extender is outdated.

The firmware of your Linksys wifi extender is faulty.

Now, in this section, we will discuss the troubleshooting steps to fix the Linksys orange light issue. Kindly follow the instructions carefully to avoid any hassle.

Firstly, make sure the distance between your existing wireless router and Linksys wifi extender is very less. 

If the existing router is far away from the Linksys wifi extender, the Linksys extender will blink orange light.

After that, you should check if the error has gone or not. If not, you may need to reboot both the devices.

The second reason is the outdated firmware on your Linksys extender, you may need to update the firmware as well.

Now, go to the Linksys extender support website and enter the serial number of your device to check for the latest firmware updates.

After that, download the latest firmware on your computer or laptop.

Login to the Linksys admin page using extender.linksys.com and go to the Firmware Update page.

Now, click Browse and select the downloaded file on your device.

Allow your device to process the firmware update. 

After a few minutes, your Linksys extender RE6500 will reboot. 

In case the firmware of your Linksys extender is already updated but has somehow malfunctioned, you may need to reset the Linksys wifi extender. To reset Linksys extender, press the reset button and hold it for a few seconds. Release the button after 10 seconds and wait. Make sure you give your device a few minutes to get back to the original settings. Moreover, please ensure to not turn off your device in the middle of the reset process.

So that was all about the Linksys RE6500 blinking orange light. We hope this post resolved your issue and your device is once again doing its job. In case you encounter any problems with your extender, kindly reach out to the support team.