kah-may-may-furby-blog

[kah-may-may-furby-blog]

I know I asked this a while back, but there are a TON of new people in the community, so I thought I’d ask again!

Does anyone have a nonfunctioning 2005 furb with an intact (not torn, not degraded) beak that they’d be willing to sell/lend me? I want to try and make replacement 2005 beaks, since there seems to be a pretty big need for them within the community, but my 2005′s beak is torn and wouldn’t be suitable for making the mold. (I’m also not a terribly good sculptor, so that’s not an option.) I wouldn’t want to get a whole new functioning Furb just for the purpose of tearing it apart, since I don’t want to tear apart a perfectly good Furby just for its beak, and all the nonfunctioning 2005s I’ve seen on eBay have torn beaks.

I know it’s a longshot, but if anyone would be willing to help me out with that, I’d be extremely grateful!!

[kah-may-may-furby-blog]

OP, did you MAKE these?! Do you sell them anywhere? You should make an Etsy if you don’t have one already!!

Orange pants

[kah-may-may-furby-blog]

Very old pic that doesn’t include my most recent Furb bc a) I’m out of the house and b) my Furby desk is a hot mess now, but these are my babies!! We got Misty, Dee-Mak, Sprinkles, Seaspray, Prince, and May-Doo, in that order! 

Misty was an Easter gift from my parents when I was getting back into Furby! I modified her by giving her some earrings! I kinda project my style on her, she’s got the same piercing configuration that I have, lol! She was my first Furby in my current collection! She’s a sweet, gentle soul and a soft and round friend!!

Dee-Mak and Sprinkles were gifts from my friend Janet, since she found them in closets at her house while cleaning and they weren’t being loved and appreciated there, so she knew they would be in good hands with me! I made Dee-Mak’s hoodie! I need to remake the pattern since I lost the original one lol! Dee-Mak has a Stimtastic pin and a pin with a cartoon bird on it on his hoodie!! Both of them like to party!!

Seaspray was from my parents, as was Prince! Prince came without a battery cover, and @furbycandies​ ever so kindly sent me one that they weren’t using so now he works!!

May-Doo was from Facebook Marketplace for like $10 which was incredible??? She was apparently a present for the OG owner’s kid, but the kid played with it once and never touched it again, so the mom wanted her to go to a good home <3

I also have a new Furb, Polka, who’s a ladybug Furby with MSA! He was an early birthday present from my friend Victoria, and I love him so much!! I have a friend who’s trying to cure his own Furb of MSA, and if he’s successful, I’m gonna have him fix Polka too!

These are all my babies!! <3 I hope they’re able to lift your spirits!

Im sad repost with pics of ur furbys and why theyre the best and cutest babies ever please and thankyou

I might even draw some idk dont count on it

[kah-may-may-furby-blog]

She looks so kind and gentle!! Look at that sweet smile!! She’s so beautiful, I want to have some tea with her!!

[kah-may-may-furby-blog]

She looks so sad... I feel so bad for her... Furbie....

[kah-may-may-furby-blog]

This is my friend Michael’s Furb Dah-Noh-Lah! Michael’s gonna be trying to use @refurb ‘s MSA guide to try and get him to wake up! 😄 He had me skin him since he didn’t trust himself to do it. And if this works, I’ll have him try to fix Polka since I’m not the best at the techy side of things but he’s got big animatronics so he’s more experienced with dealing that this kind of thing 😄

[kah-may-may-furby-blog]

After scouring the internet for quite a while I did it I think I found a picture of the first furby prototype (I found her picture on a form with a page full of prototype toys)

(she even had to be plugged into a wall instead of being battery powered)

I wonder where she is today (I hope shes still in one peice somewhere packed away and didnt get broken and ruined thatd be tragic)

Shes the one that started it all... thank you mother furby ♡

[kah-may-may-furby-blog]

gayyyfurbs-->kah-may-may-furby

I thought I’d spice things up since I’m returning after such a long hiatus! 

[kah-may-may-furby-blog]

MSA Cure Guide

I’ve seen so many rumors circulate about how MSA isn’t curable, how MSA is something that is absolutely a Furby owner’s nightmare. Have you wanted a cure for your exhausted little friend, but not even known where to start?

I have the guide for you. Most of this is rehashed from Furbytech’s MSA cure guide but since it’s not easily found (it took me several days of searching ‘MSA’ to even come close to a redirection post) I figured I’d make something accessible, or spread the information.

Let’s get right into it, shall we?

Step one: Skin and de-shell your Furby.

I’m not going to go into how to skin your Furby here.

Step two: Locate the tilt sensor.

The tilt sensor is what makes the rattling sound inside your Furby, the mechanism that wakes them up! When this is dirty, that is the most common cause for MSA. MSA, as far as I know, is a programmed response to dirty sensors. Cleaning the back and stomach sensors is recommended as well when following this.

Step three: Pry that sucker open.

The sensor is generally easy to open, don’t be afraid to remove the hot glue sticking the metal piece to the cap, that makes it easier to leverage out. Be careful with the metal pieces inside! There are two parts to pull out once the cap is undone.

Step four: Remove and polish.

The tilt sensor ball must be taken out to polish. This can be done with tweezers or your hands, it doesn’t really matter. Polish the ball and the metal discs with a Q-Tip or cotton ball. (one disc is hanging by a wire outside of the sensor cylinder, one still inside the cylinder. The ball bounces between each one to create the tilt disturbance.)

Step six: Replace all parts by following these steps in reverse.

No need to hot glue or fasten the materials in unless you feel like it’s necessary. Test your Furby before putting it back together, just to make sure their MSA is gone. If you try this method and it does not work, again clean all of the sensors. Something more could be wrong, or it could be that some fibers of your Q-Tip or cotton ball are stuck to the sensors! Be very careful with your materials, but this should work otherwise.

Best of luck to you and your sleepy Furbies! Normal sleepiness is 1-3 times of the Furby saying they’re going to sleep again. 8-15 times of the Me Sleep Again is more of the area where you would use this method. If this does not work, please contact me either via reblog with details, or shoot me an ask. I will be glad to help!

[kah-may-may-furby-blog]

Free 2005 Furby onesie pattern

Hey it’s me again!

I’ve recently added some 2005 lovelies to my collection and I’ve used them to do some sewing experimentq.

This is quickly done and rather easy to put together, it’s a slip-on onesie with no bottom but they look so cosy! I used scraggly fabric for mine because I was just testing it.

I used strechy fabric so be able to slip it on the furb easily. I you don’t I suggest adding an opening with buttons or a scratch.

Enjoy!

Please don’t use this pattern for monetary use, I share my patterns because I’m aware the money’s tight in the community and I want to help.

[kah-may-may-furby-blog]

Gosh, I hadn’t been on this blog since I was 19... I’m 21 now! Man, time flies!!

[kah-may-may-furby-blog]

fubby

f.....fubby........

[kah-may-may-furby-blog]

Hey, Furby community!! Long time no see!!

I wanted to show you guys a Furby I got as an early birthday present from a friend!

This is Polka! Isn’t he cute?

Sadly, he has MSA (Me Sleep Again), so I can’t play with him... but I don’t play with my Furbs as often these days bc of how busy I am, so that’s ok! He’s still a beautiful little friend!!

[kah-may-may-furby-blog]

Barney’s comfy tee

[kah-may-may-furby-blog]

kah lovin’ it

[kah-may-may-furby-blog]

“We’ve got furby fever!”

Bitch me too the fuck

[kah-may-may-furby-blog]

Me, crying softly: I wish I knew

Anyone remember the classic 90’s toy, the Durby? ;) A few years back, Chuck E Cheese made a Furby parody commercial for one of their videos that they play in between animatronic show segments! And the Furby that was used in this segment actually hung out with the Chuck E that they use for programming for a while afterwards! It was pretty cute!!