justwhyandhow-blog - Tumblr blog

justwhyandhow-blog · 7 years ago

Text

Heating Tune Up and Furnace Maintenance Service Company in Atlanta

A heating service we offer our Atlanta customers is known as furnace tune ups, important for maintaining maximum efficiency and output.

A heating or furnace tune up is different from a heating repair in that it helps maintain your furnace for improved reliability and durability.

What is the goal of a Heating Tune Up?

The goal of a heating tune up is to keep your system in like-new condition, which helps prevent breakdowns, extend the life of the furnace, provide healthier indoor air and use less energy to save you money on your utility bills.

29 Point Furnace Maintenance Checklist

Test Carbon Monoxide Levels

Clean & Adjust Burners and Inspect Heat Exchanger

Check Thermostat Operation

Lubricate All Motors & Bearings

Install one 1″ Pleated Filter & Tape Filter Rack If In Unconditioned Space

Test & Adjust Operation of Safety and Operating Controls

Inspect Flue Pipe & Gas Valve

Check Blower Motor (and belt if applicable)

Test & Tighten All Wiring and Connections

Flush Condensate Drain To Protect Overflow When Required

Check Temperature Rise

Check Sequencer

Check Strip Heat

Check Defrost Board

Check Reversing Valve

Check Outdoor Thermostat

Check Refrigerant Pressures

Check For Natural Gas Leaks at Gas Whip & Visible Fittings

Clean Flame Sensor

Clear Obstructions At Pressure Switch Port

Install or Initial Service Sticker

Vacuum Blower & Burner Areas and Clean Outside of Furnace

Visually Inspect Duct System

Visually Inspect Water Heater

Visually Inspect Grills & Registers

Visually Inspect Attic Insulation

Smoke Test Around Plenums and Accessible Take-Offs

Inspect For Combustible Items Stored Near Gas Appliances

Inform Customer of Equipment Condition. Recommend Necessary Repairs.

Other Things We Look For During Heating Maintenance Tune Ups

Maintenance Tune ups are so important for your furnace because it ensures a long longevity for your system.

Much like taking your car to the shop every few months, we perform system checks on your furnace to keep it running smooth all year long.

Not having regular tune ups can lead to costly repairs down the road, or even a hefty replacement.

In addition to the checklist above, here are some other things we check for during a routine heating tune up service:Dirty Air Filters

For maximum HVAC performance and airflow, air filters should be replaced regularly. Assured Comfort recommends changing the filters every 3 months.

A dirty air filter can cause your HVAC system to use more energy when pulling air through the filter, which results in higher energy bills, poor overall HVAC performance, and dirty indoor air. An extremely dirty filter can cause your entire system to eventually freeze and shut down.

Clogged Drain Lines

This is a result of the build-up of dirt and other organic materials in your home’s drain lines. Clogged drain lines can lead to severe HVAC damage because they cause water to back up and ultimately overflow the drain pan. In addition, clogged drain lines can result in mold and mildew growth, which left untreated, can be dangerous to your health.

Blown Fuses

Sometimes a blown fuse is a result of a breaker issue. However, fuses that blow frequently could indicate more severe problems with your HVAC.

Refrigerant Leaks

An HVAC system should not leak refrigerant. If you’re experiencing refrigerant leaks, this is a problem that requires repairing rather than simply replacing the refrigerant.

If you’re noticing higher utility bills or longer than usual times for your home to reach your desired indoor temperature, your refrigerant levels may be too low. In either case, please call Assured Comfort so we can inspect your refrigerant levels.

This is something we always check out during routine maintenance. Keep in mind Refrigerant R22 is in the phase-out process because it’s harmful to the environment as well as indoor air.

Refrigerant leaks are not normal and according to the EPA are bad for the environment. Refrigerant levels are always checked during routine maintenance. We can check to see if your system currently uses R-22, which we can replace. Handling freon can be dangerous, and should only be performed by a professional HVAC technician.

Dirty Condenser Coils. Failure to have your condenser coils cleaned can negatively impact your HVAC system’s performance. In fact, dirty coils can reduce your system’s efficiency by nearly 40%, which can shorten the lifespan of your unit.

Electrical Problems. Wiring and electrical components of your HVAC should be checked regularly by an HVAC technician to prevent system malfunction and even entire system outages.

Frozen Evaporator Coil. Low refrigerant levels can cause the evaporator coil to freeze, which can result in restricted airflow. An HVAC technician will inspect your evaporator coil during a routine maintenance to make sure it isn’t frozen or in a position to freeze over.

Thermostat. Thermostats are used to control the temperature of your indoor air. Sometimes, they can break or stop working and require a replacement. Contact your HVAC technician if you think your thermostat needs an upgrade. Did you know that keeping a consistent temperature in your home can also keep a furnace running smoothly during winter?

Shutting the system off and on is worse than keeping your thermostat at the “heat” setting during winter and leaving it at the optimal temperatures when you’re away and when you return to your home, which is generally somewhere between 68 and 72 degrees Fahrenheit. That’s during the waking hours of the day when family members are home.

The thermostat can be turned to between 62 and 58 degrees (or even a little lower) when household members are away at work or school, or at night when everyone is sleeping underneath their blankets in bed.

There’s no need for your furnace and heating system to waste energy since when family members are asleep and less active. This temperature range is also just high enough to prevent pipes in the home from freezing if outside temperatures dip and family members aren’t home to address the situation.

It’s also a good idea to resist turning your heat off completely when you’re not home.

Turning the heat off entirely means your house is largely subject to environmental factors.

So if it’s super chilly outside and there’s an arctic blast blowing, your house will cool down so much while the heat’s off, that when you get home and turn the heat back on to bring your house back to a comfortable temperature, you will cause your unit to work harder, use excessive amounts of energy and cost you more money than if you only turned your thermostat down 10 degrees or so while you were away.

Certainly having a programmable or smart thermostat makes these kind of regular temperature adjustments much easier to maintain.

A programmable thermostat can regulate household temperature according to your activity, sleep and work schedule. You can program your thermostat to change the temperature about half an hour before you wake up in the morning, leave for work, arrive home from work, and go to sleep at night.

You can also have a separate temperature programming for the weekends while you are home more. According to heating industry experts, a programmable thermostat can reduce your heating bill by 10 percent by automatically making adjustments in your home’s temperature during the day.

It’s worth noting that the temperature ranges we’ve stated here are just guidelines.

Probably most people will fall within 68 to 72 degree daytime comfort range, but not everyone will find the exact same temperature ideal.

Exactly where you and your family members fall within these ranges is subjective.

Chances are, there’s going to be someone in your household who’s comfortable with temperatures a couple degrees cooler or warmer than others in the family.

The challenge is finding that happy medium.

If everyone in the family likes the thermostat set to 70 and you’re the only one who’s still chilled, you may just need to invest in some extra slippers and sweaters so that you can keep the rest of the family happy.

Get Heating Maintenance Services at your home in Atlanta Today

If need our professionals to come out to your home please give us a call or click the link below.

Our Atlanta Heating & Furnace Maintenance team is available 24/7 to help with questions you may have.

0 notes

justwhyandhow-blog · 7 years ago

Text

Premier Home and Attic Insulation Company in Atlanta

Want to reduce energy loss in your Atlanta home? Then call the Insulation experts at Assured Comfort.

We’ll advise you on the best insulation to suit your home’s needs and provide a professional installation to help you achieve maximum energy efficiency.

Much of your home’s heat can be lost through the roof, especially if you have insufficient attic insulation. That’s because warm air rises, even inside a house.

Heated air expelled by baseboard heaters and radiators can quickly make its way to your ceiling and through your roof. If you can easily see your joists, or if there are ice dams or melting snow on your roof during winter, more insulation is probably needed.

Most homes are not adequately insulated, which causes the heating system or furnace to run harder to heat the home.

This results in higher utility bills during winter.

Adding insulation to the attic, basement walls, crawl spaces, and the floor above an unfinished basement can solve this problem.

Are you unsure whether your home is well insulated?

If you’ve never had a home energy audit before, we recommend you schedule one with us.

"A home energy audit is a room-by-room review of how efficiently your home uses energy—including an insulation assessment".

We’ll show you the energy loss points in your home so you can stop wasting energy and start reducing your energy costs.

How to Choose the Right Atlanta Insulation Contractor for Your Home

While it goes largely unnoticed by homeowners, insulation is an important component in every house. It is what keeps the heat inside of your home and keeps your energy bills down.

"The United States Department of Energy estimates that as much as 70 percent of the energy used in the country is for heating and air purposes".

If your house is not properly insulated, your money could be going right out of your walls – literally. Use the following tips from Assured Comfort to determine the type of insulation that is best for your home:

Know your Homes R-Value

One of the most important qualities of insulation is its R-value. This is the measure of the insulation’s ability to resist heat traveling through it.

The higher the R-Value, the better it is at insulating. Use the map below and its corresponding table (courtesy of Lowe’s home improvement) to determine the R-value you need based on what region of the country you live in.

Types of Insulation

There are multiple types of insulation options available, each with its own advantages. These include:

Blow-in insulation is loose insulation that is sprayed into place via pressurized air equipment. It is useful for hard-to-reach places and can be applied over existing installations to fill cavities.

Batts are precut pieces of insulation that are easy to handle and install between wall studs. While they are soft and fluffy, compressing them can significantly decrease their R-value.

Rolls are similar to batts because they are precut by width, but come in much larger lengths to cover long stretches of floors and crawlspaces.

Rigid Foam insulation refers to sheets of polystyrene which insulate while providing a partial vapor barrier.

Where to Insulate in your Home

Nearly any part of your home can be insulated, but these are the top five areas according to CertainTeed:

Your attic. Since warm air rises, up to 50 percent of heat can be lost through your attic.

Your basement. An un-insulated basement can lose up to 30 percent of your home’s heat.

Walls. Failing to insulate your walls can result in drafty rooms and significant heat loss.

Floors. Without insulation, floors are often cold during the winter months and can lose some of your home’s heat.

Ducts. In order for heating and A/C systems to deliver a consistent temperature year-round, the air ducts should be insulated.

Atlanta Home Insulation Tips

Insulating your home is the number one step you can take to save energy and money.

Insulation reduces the exchange of air through your walls, attic, roof and air ducts. Less warm air escapes from the house during the winter, and less cold air escapes during the summer.

This means less energy is needed for heating and cooling. It all makes good financial sense to homeowners, which is why people across the country are turning to insulation in order to save money on their monthly energy bills.

But before you begin your home’s insulation project, read through these tips:

Locate problem areas. To determine which areas of your home need insulation, first find out where you are losing the most heat. The best way to do this is through a professional energy audit. You can also diagnose problem areas in your home with a simple hand test. Dampen your hand with water and run it near your home’s walls, doors, windows and outlets. If you feel your hand get colder, air is likely seeping through that spot.

Add weatherstripping. Windows and doors are responsible for a large amount of heat loss in most homes. Insulating can be a difficult and expensive task. For a quick fix, seal cracks around windows and doors with weather strips. They can be purchased at your local hardware store, cut to size, and installed quickly. Weatherstripping can do a good job of stopping small air leaks.

Get the right R-Value. Before purchasing insulation for your home, it is important to get the correct R-Value. Exactly which R-value is best depends on the part of the country you live in and which part of the house you are insulating. Here is a map of recommended R-Values based on which area of the country you live in, courtesy of theDepartment of Energy.

Assured Comfort Heating, Air, Plumbing’s is Georgia’s leading provider for heating and air conditioning services, including insulation services.

From furnace repairs to HEPA filter installations, we can meet all of your HVAC needs. We also provide home energy audits and insulation solutions.

To learn more about what we can do for you, call our Insulation Service specialists in Atlantaat 770-872-4168 or schedule a service online and save 10%.

0 notes

justwhyandhow-blog · 7 years ago

Text

Heat Pump Installation and Servicing in Atlanta

When it comes to heating and cooling your home in Atlanta, Heat Pumps are becoming an increasingly popular option.

"A heat pump is an electrical device that controls the temperature inside the home by moving heat from one place to another".

Unlike a furnace, a heat pump doesn’t burn any fuel to create heat; it only transfers warm air.

During the summer, a heat pump pulls heat out of the house and transfers it outdoors, operating very similarly to a standard central air conditioning system.

In the winter, a heat pump does the reverse process: it captures heat from the outside air and moves it inside the house.

Here is a video explanation of how a heat pump works.

This may seem strange, but even during the dead of winter there is still heat in the outdoor air (although it may be compressed), and this is what the heat pump collects and releases inside the house to make the indoor temperature comfortable.

A heat pump is truly an all-in-one home comfort system—functioning as a heater in the winter and an air conditioner in the summer.

Heat pumps—an especially good alternative for Southern homeowners

While Heat Pumps can do a great job at heating and cooling your home, they’re not the best option for everyone. This in big part depends on what part of the country you live in.

In Atlanta, Georgia and other parts of the South, with hot summers and mild winters, heat pumps are often the ideal choice for home comfort systems.

That’s because even when it’s “cold” outside in Georgia during winter, it usually doesn’t dip below 40 degrees Fahrenheit, and there’s normally a fair amount of heat outside for the heat pump to bring indoors.

And really, it’s not difficult for the heat pump to move heat indoors when there’s a minimal temperature difference between the outdoor and indoor air; the inside temperature may only need to be 20 or 30 degrees warmer than the outside air.

During the summer, when homeowners are seeking cooler indoor air, heat pumps have nearly the same efficiency as a dedicated central air conditioning unit or system.

A heat pump can handle the steamy, muggy weather just as well as most AC units.

On the other hand, heat pumps aren’t nearly as effective in colder, northern climates where the air temperature dips below freezing on a regular basis.

When it’s that cold, it’s much harder for a heat pump to extract heat from the outside air. If the heat pump can’t collect enough warm air, supplemental energy will be needed in order to get a house to a comfortable temperature.

In that situation, a heat pump may have added electric heating coils in the air handler to provide supplemental heating—but the cost of this electric heating can be more than the cost of oil or gas heat from a furnace.

Other top reasons to consider a heat pump for your home

If you live in the Atlanta, Georgia area, there are additional reasons to consider having a heat pump installed, besides the fact that you live in a moderate climate.

Heat pumps offer a number of distinct advantages to homeowners, including:

Energy efficiency. If you are not living somewhere with frigid winters, heat pumps are normally the most energy-efficient way to heat your home during the winter. Because a heat pump simply transfers heat instead of creating it, it can be 3 to 4 times more efficient than even the best gas and electric heaters.

Environmental-friendly. Unlike furnaces, heat pumps do not burn anything, so they do not produce soot, smoke or fumes while they operate. The majority of the energy they use (up to 75 percent) comes from the environment; they only use a small amount of electricity to move heat. There is no carbon emission (beyond the minimal amount of electrical energy required to run the compressor).

Lower installation cost. In general, the price tag on the installation of a heat pump system is much lower than what it costs to have a furnace put in. That’s because furnaces require an extensive ventilation system (flues, vent pipes, etc.), which must be added into the total cost of a furnace installation if the home doesn’t already have one.

Safety. There are no flames or hot surfaces associated with heating pumps that children can touch and hurt themselves on, unlike with gas burners and wood stoves. Not only that, there is no risk of carbon monoxide poisoning when you’re using a heat pump.

Little noise when running. While furnaces run loudly when in use—enough to make it hard to relax at times—most heat pumps operate very quietly and do not make nearly as much noise. About all that’s heard when a heat pump is in operation is a very low humming sound.

Reduced dry air inside the home. Electric heat pumps do not produce dry air when heating, nor do they remove the moisture from the air—unlike furnaces which create a lot of dry, high-static air when running. When a home is heated by a furnace, a humidifier is often required to make the indoor air more comfortable. A humidifier is not needed when a heat pump is used, since moisture remains in the air.

Improved air quality. Heat pumps circulate the air in your home while the filters clean and purify the air to effectively remove dust, odors, mold, smoke, pet dander and other airborne irritants. They can be the perfect solution for people with asthma or allergies, or for anyone concerned about indoor air quality.

Reliability. Heat pumps have been used widely since the 1940s and their design has been tried, tested and proven. With regular maintenance, a heat pump can last as long as a quality air conditioner—often 10 to 15 years or longer.

Contact our Atlanta Heating Professionals today to learn more

Manufacturers make many different types of heat pumps, from air- and ground-source heat pumps to ductless mini-split, solar-heated and geothermal heat pumps.

Some types of heat pumps are better-suited for certain styles of homes than others. During your appointment, we’ll be happy to go over the different options with you, provide an accurate cost estimate, and answer any questions you may have.

We look forward to working with you!

If you’re in the market for a new heating or air conditioning system and you live in the Atlanta area, a heat pump may be just the solution you’ve been looking for.

To talk with a comfort system expert and learn if a heating pump installation is right for your home, call Assured Comfort at (770) 942-1938 or schedule online to save 10%.

0 notes

justwhyandhow-blog · 7 years ago

Text

Atlanta New Furnace Installation Company

Having trouble with your Furnace in the Atlanta area and want to speak to a Professional?

Assured Comfort is a premier Lennox Dealer and your experts for furnace replacements and installations.

We believe that Lennox offers the most advanced, energy-efficient products available on the market.

We also service and install all makes and model furnace (and air conditioning) systems. From pre-programmable thermostats to handheld device-operated systems, you can enjoy the latest and greatest features our furnaces offer.

Our HVAC technicians will help you choose the best heating system for your home, which includes finding a system that’s properly sized and energy-efficient.

Most furnace replacements or installations can be performed in one day.

"A single system installation typically begins around 8:30 a.m., and is completed by 4:30 p.m".

If you require an installation for multiple heating systems, we’ll strive to complete your install in one day’s time and send two crews when possible to get the work done.

We offer free home estimates on all new heating system installations. Contact us today to schedule your heating installation estimate.

Purchasing a new heating system for your Atlanta home is easy with the help of Assured Comfort.

"We earned our five-star testimonials and A+ rating from the Better Business Bureau by providing superior service to our valued customers at affordable prices".

Our technicians are always clean, professional, fast and dedicated to you – the customer.

Schedule Your Free Estimate today!

Schedule Now!

Here are five reasons why you should have Assured Comfort install your home’s new heating system:

You’ll get the heating system that’s right for you.

Instead of trying to sell you on our most expensive product, our heating professionals take into consideration the size of your home, budget requirements, manufacturer warranties, and personal preferences in order to provide you with the heating system that’s best for you.

We’ll also walk you through energy efficiency ratings and their significance so you can save money without sacrificing comfort.

We promise you a professional installation.

Our team of skilled technicians are all NATE-certified and participate in regular training courses to stay current on the industry’s latest products, trends and procedures.

After installation, our technicians will make sure your system is functioning at peak efficiency levels.

They’ll show you how to operate your system to fully take advantage of all of its features.

We provide free, no-obligation estimates.

With Assured Comfort, we offer up-front pricing so you will never have a surprise on your bill. Before we begin working, you will have an exact quote of how much the job will cost. All estimates are obligation-free, leaving you with your purchasing freedom.

We offer flexible financing options.

Whether you want to pay for your new heating system up-front or over time, Assured Comfort offers a pricing plan that’s right for you. A variety of financing options are available with approved credit, and we will always help you take advantage of rebates you qualify for.

We provide excellent warranties.

For your peace of mind, our experts will go over manufacturer warranties for the different heating systems you’re considering. If you want to maximize the protection of your new purchase, we’ll also provide a warranty on our workmanship.

Top 4 Considerations When Replacing Heating Systems

As temperatures begin to drop, many people are looking to replace their old heating systems for newer, more efficient ones. If a heating system upgrade is on your agenda, here are four things to consider before making your purchase:

The type of heating system

The first thing to consider when looking for a new home heating system is the fuel type that it uses. In general, it’s most convenient to use the same fuel you’re currently using, but that doesn’t necessarily make it the best option.

You can view a list of the most popular fuel sources and the benefits of each here. Your final choice will likely be contingent on the price and availability of each fuel source in your area, as this varies across the country.

The size of the heating system

After determining which type of heating system you want, you’ll need to determine what size is optimal for your home.

A heating system that’s too small will not adequately heat your home, whereas one that’s too large will result in fluctuating temperatures and wasted energy.

This process is more complicated than just figuring out the square footage of your home; factors such as climate, temperature preferences, and house layout must also be considered.

At Assured Comfort, our expert technicians will walk you through the entire process to help you select the heating system that’s right for you.

Energy efficiency ratings

Whether you’re trying to save the environment or just save some cash, energy efficiency is an important consideration when shopping for a new heating system.

This largely impacts the long-term cost of operation for your new unit, so it’s important to carefully research all of your options.

The HVAC company that will do the installation

The contractor is equally as important as the heating system they install.

Even the most powerful heating system on the market will not perform well if it was poorly installed.

In one of our previous blog posts about choosing an HVAC contractor, we emphasized the importance of choosing a company with NATE-certified technicians.

At Assured Comfort, our specialists are all NATE-certified and provide up-front pricing guarantees.

Not sure if you need a heating replacement or simply heating repairs? Take our repair or replacement quiz on our website to find out.

A representative from Assured Comfort will contact you to discuss your results with you.

Please note, this is not the ultimate solution for finding out if you need repairs or replacements; it’s still best to have a technician come out to your home and inspect the system, and we offer free replacement estimates for this type of service.

If you live in the metro Atlanta area or the surrounding cities and need a heating system installed before winter arrives, please give Assured Comfort Heating, Air, Plumbing a call at 770-872-4168.

0 notes

justwhyandhow-blog · 7 years ago

Text

Heating Repair Services in Atlanta

Is your furnace or heating system not working like it used to?

It might need repair or servicing to get it working at full capacity again.

Assured Comfort offers professional heating repairs in Atlanta, Georgia.

Our capable technicians can repair your heating system at affordable prices. You can also call us for installation or maintenance services in Atlanta.

Our technicians offer heating repairs for all types of heating systems. Whether your furnace is a new or old system, we can offer the best services for repairs and maintenance.

Our heating repair services are timely, efficient and highly affordable. Are you located in Atlanta, GA? If so, give us a call today!

Six Signs Your Furnace Needs Repairs

An obvious way to know you need furnace repairs is it simply stops working. There are also more subtle signs of problems.

Here are the top six warning signs:

When you turn on the thermostat, it doesn’t turn on the furnace.

Your utility bills are higher than usual.

The furnace is very loud and noisy while it’s running.

Your system is more than 10 years old.

Your pilot light is yellow instead of blue.

Your furnace blows cold air.

If the furnace is less than 10-years-old and not functioning properly, contact us to schedule a heating repair.

Our technicians are licensed and insured and can repair any make and model heating system. It’s important to note that a heating repair and a heating tune-up are not the same thing.

Repairs are services that are necessary when your heater isn’t working properly, to restore system performance.

A tune-up is the routinely scheduled services, inspections and parts replacements that is highly recommended by all manufacturers to prevent future breakdowns and costly repairs.

With regular maintenance, your furnace can continue to run smoothly and will help you avoid costly emergency repairs down the road.

Furnace Repair vs. Replacement

If your heating system in your Atlanta home isn’t operating properly, should you call the local repair service or splurge on a new furnace?

This is not always an easy choice for homeowners, as both options present their own consequences and benefits.

The guidelines below will help you decide whether to repair or replace your furnace.When to Fix Your Furnace

If one or more of the following conditions apply to you, it’s generally in your best interest to repair your heating system instead of replacing it:

You’re still within your warranty period. If your heating system is still under manufacturer’s warranty, the manufacturer should pay for the majority (if not all) of the repair costs.

You’ve had your system for less than 15 years. The newer your furnace, the more reason to opt for a repair instead of a replacement. As a rule of thumb, if your furnace is less than 15 years old, it is still considered “repairable.”

A move is in your future. If you are considering moving to a new house within the next couple years, you should repair your furnace if at all possible and try to make it last until you settle into your new home.

When to Replace a Furnace

If you’re facing any of the circumstances below, you probably should replace your existing system with a newer, more energy-efficient one:

Your equipment needs frequent repairs. HVAC experts recommend following the 50 percent rule when deciding whether to repair or replace a furnace. This rule states that if the cost of repair is more than half the cost of a new system, you should replace your existing model.

Your home is experiencing uneven temperatures. If you notice uneven and inconsistent temperatures in different areas of your home–one room may be too hot and another is too cold—consider replacing your heating system.

Your heating system is noisy. If your home’s HVAC system is constantly cycling on-and-off and putting itself into overdrive to meet the demands of the thermostat, this is an indicator that a replacement is needed.

If you live in the metro Atlanta area and need your heating system repaired or replaced, the experts at Assured Comfort are ready to help.

To schedule a service call or for more information about the commercial and residential HVAC services we provide, please contact us or schedule an appointment.

Schedule Service Online

How to Prevent a Furnace Breakdown

During this time of the year, our technicians are extremely busy servicing heating systems. A common complaint we hear from our customers is that their furnace “isn’t operating like it used to.”

Properly maintaining your furnace is key to maximizing both its performance and lifespan.

Use the following four tips to get the most out of your furnace:

Replace the filterregularly. It is estimated that 90 percent of furnace issues are caused by the filter. Not only will a dirty filter restrict airflow and hinder your energy efficiency, they also put additional wear-and-tear on your furnace and can significantly reduce its lifespan. Different filters have different replacement schedules, so read the instructions when you put yours in; some need to be replaced as often as every four weeks.

Insulate your home. It’s hard for your furnace to be efficient if half of the heat it’s producing is going out the window, or through walls or ceilings. Insulating your home is an effective way to retain heat and boost energy efficiency. Key places to insulate your home are on the walls, floors, attic and basement.

Get a programmable thermostat. By installing a programmable thermostat in your home, you can take advantage of scheduling your heat usage. For example, turn down the heat before you go to bed and have it automatically turn on an hour before you wake up to avoid getting up to a cold house. Read about all the benefits of programmable thermostats here.

Have your furnace professionally installed. The best furnace in the world isn’t going to operate at maximum capacity if it wasn’t properly installed. When it comes to your furnace’s performance, your HVAC contractor matters just as much as the manufacturer of the heating equipment.

To ensure your home’s furnace is installed exactly to manufacturer’s specifications, enlist the services of Assured Comfort.

We also provide furnace repairs, tune-ups and annual service plans.

To schedule a service call with one of our trusted Atlanta Heating Repair technicians, or for more information about Assured Comfort’s services, please call 770-872-4168 or click the button below.

0 notes

justwhyandhow-blog · 7 years ago

Text

Faucet Replacement and Repair Services in Atlanta

Assured Comfort are the experts when it comes to reparing and replacing faucets in your Atlanta, Georgia area home.

Since 2002, our team of faucet repair specialistshave been assisting Atlanta homeowners with all of their faucet needs.

A leaky faucet is not something that should be put off. Further damage can occur to the plumbing of your house if left unrepaired and can lead to costly plumbing bills when the issue could have originally been resolved with a quick fix.

If you notice that one of your faucets is leaking or not working properly, give Assured Comfort a call or click on the link below and we will have one of our technicians right over to assist you.

Schedule Appointment Online

Type of Faucets that are Common in Atlanta Homes

Faucets come in all shapes and sizes and serve a variety of purposes. However, many of them will have similar issues when they are not functioning properly.

Before a faucet can be repaired, our technicians must first determine what type of faucet we are dealing with. They are classified based on the type of mechanisms that are used for its functioning.

Some of the common types of faucets used throughout Georgia include:

Cartridge Faucet - Cartrige faucets are washerless faucets and can have either one or two handles. What seperates cartridge faucets from the other types of faucets is how they regulate water temperature and pressure. A Cartridge Faucet uses a moveable stem cartridge that moves up and down to regulate the amount of water that pours out, and the handles are turned side to side to regulate the temperature of the water.

Disc Faucet - Disc Faucets are single handle faucets where the handle is connected to a wide cylindrical body. These faucets use a pressure balance cartridge that mixes cold and warm water in a small chamber and the temperature is controlled by side-to-side rotation of the handle. To control water pressure, there are two ceramic discs located in the pressure chamber that move up and down in collusion with the handle.

Ball Faucet - Ball faucets are so called because they use a single handle that rotates on a round cap located on the faucet body. The Ball Faucet functions by rotating a small ball that has small chambers in it located in the body of the faucet. Depending on the position, this small mechanism controls the water pressure and temperature. It is also important to know that Ball Faucets tend to have more leaks than Cartridge or Disc Faucets.

Compression Faucet - Compression faucets are the oldest type of faucets and are thus the most likely to have issues with leaking compared to the other types of faucets. These faucets operate with a large washer wrapped around a large compression stem. The temperature and pressure are regulated by two seperate handles, one for hot and one for cold, and pressure is turned off by twisting them closed.

How Much Could a Leaky Faucet Cost You?

If you have a leaky faucet, having a professional repair service come and fix it is the best way to prevent further damage and save you money.

Although they may not seem like a big deal, leaky faucets can cause homeowners in Atlanta a lot of money if they go unfixed.

"A single bathroom, kitchen, or other type of home faucet with a slow dripping leak can lead to a 10% increase in your yearly water bill".

Besides the cost of your water bill, a leaky faucet could be the sign of a bigger problem, and if left unaddressed, can be the difference between a cheap repair, and an entire replacement, which could cost upwards of $1000.00.

On top of the potential financial cost of a leaky faucet, there is also the issue of wasting water.

"One single faucet leak over a one year period on average can lead to wasting 10,000 gallons of water".

As you can see, the best route to take when you have a leaky faucet in your Atlanta area homeis to contact a professional faucet repairman to nip the issue in the bud and save yourself money long term.

Common Causes of a Leaky Faucet

Faucets can spring a leak for a variety of reasons, and depends on the type of faucet. Some of the common causes of a leaky faucet include:

Worn Out Washer - A worn out washer is usually the result of friction that is created when the washer is pressed against the valve during use over time. By simply replacing a the washer, the leak can be stopped and prevent further damage to the faucet.

Corroded Valve Seat - The valve seat is located between the spout and faucet. Corrosion occurs due to the minerals in water as the water passes through the compression chamber. Cleaning the valve seat is the best way to prevent its corrosion and reduce the chance of leaks.

Issue With an O-Ring - An O-Ring is the small disc that is connected to the stem in a Disc Faucet. Over time, the O-ring can get worn down or become loose, leading to a drip comming from your faucet.

Loose Parts - Loose parts in the stem of the faucet are naturally caused by use over time, and result in water leaking from the faucet handles. By checking the tightness of the nuts and stem screw, you may be able to prevent leaks in your faucet caused by loose parts.

Broken Plumbing - Broken Plumbing is a serious issue in the piping in your home. This is usually caused by a small crack in one of the pipes connected to the faucet, which can cause a decrease in water pressure and leaking. Getting your plumbing installed and maintained by a professional is the best way to prevent a Broken Plumbing issue from occuring.

Worn Out Seals - The Seals used in the mechanisms of faucets can become worn out over time from the constant passing by of water, and can cause a faucet to drip. Having a professional inspect the pressure mechanism in your faucet and clean it is the best way to prevent this issue from occuring.

Improper Installation of a Washer - If your faucet has a washer that has not been installed correctly, or is not the right size, it can cause a leak in your faucet. Having a professional install your faucet in the first place is how to best avoid this common issue.

Call Atlanta's Best Faucet Repair and Installation Team

If you are having issues with a leaky faucet in your Atlanta area home, call the professionals at Assured Comfort.

Our team of faucet specialists have years of experience in the repair and installation of all different types of faucets.

A leaky faucet can cause you to waste unnecessary water and money. Having a professional inspect your faucet, determine the cause of your leak, and decide what the best option is moving forward is crucial to saving you money long term.

Call or click on the link below to speak with one of our Atlanta Faucet Installation and Repair specialists at Assured Comfort Today.

0 notes

justwhyandhow-blog · 7 years ago

Text

Garbage Disposal Repair, Replacement, and Installation in Metro Atlanta, Georgia

The garbage disposal may be one of the most misused appliances in the home, and that is why many of Assured Comfort's plumbing service calls involve garbage disposal repair and replacement in Atlanta.

A garbage disposal is a food waste disposerunit that is typically electrically-powered.

It is installed below the kitchen sink to trap food and shred it into small enough pieces to fit through the home's drain pipes.

Few people realize that garbage disposalsare really only designed to handle light food residue that is rinsed off of plates and other cooking utensils before they go into the dishwasher.

When large quantities of food and debris go into disposers, it can overwhelm them and clog the kitchen sink drain.

Assured Comfort's technicians are experienced in determining if your garbage disposal just needs a simple repair or a complete replacement.

Regardless, we will help with your broken garbage disposal and get your sink flowing back to normal quickly.

If you are in the Atlanta Metro Area and are experiencing a problem with your garbage disposal, call Assured Comfort today and we will send one of our professional plumbers out to get it fixed fast.

Prevent costly repairs or replacement by keeping your garbage disposal in its optimal working condition with these tips.

Avoid putting food waste down the drain and into your garbage disposal that consists of,

Grease and Oils

Fat or Lard

Pulpy Materials

Large Food Items

Tough Meat and Bones

Fibrous Foods (celery and banana peels)

Fruit Seeds or Pits

If you are experiencing a garbage disposal that doesn't work, there are a few simple fixes you can try on your own before contacting a plumber.

For example, if you can hear the hum of your garbage disposal but it won't operate properly, follow these three steps to try to determine the cause of the problem and solve it.

Find and press the reset button that is often located on the bottom of the garbage disposal.

If this does not change anything, shine a flashlight into the drain to look for an foreign objects, such as utensils.

If there is an item in the disposal area causing the problem, be sure the power is off and only remove the item with pliers or a grasping tool. It is extremely dangerous and never recommended to put your hand or any other object into the garbage disposal.

If you have a more complicated problem and the simple fixes above do not do the trick, you can contact Assured Comfort for help.

Our Atlanta plumbers are experts in repairing, installing, and maintaining garbage disposals.

Just call Assured Comfort and one of our Atlanta plumbers will be out to fix your garbage disposals soon as possible.

0 notes

justwhyandhow-blog · 7 years ago

Text

Getting Your Water Service Line Repaired and How to Prevent it in Your Atlanta Home

Assured Comfort's Plumbing service team in Atlanta can help diagnose the issue and provide expert water line replacement.

What is a Water Service Line?

A water service line is a line that needs to be put in a house or in a building in order for it to have water.

This line is tapped in the water main where water is sourced into that specific area and directly to your home.

It’s a pretty simple definition but connecting a water service line is a challenging and messy job. This is the reason why repairing the system doesn't just require any plumber, the Atlanta plumber should be an expert with line connections.

Repairing or replacing a water service line is not an easy job, depending on your situation and the amount of damage that was done, it may take a while to provide a solutions

So let's dig in to learn more about Water Service Lines.

What To Know About Water Service Lines

Service lines are always bored deep: Your line can either be 2-4 feet below the surface, the reason for this is because the lines are prone to be moved if it’s close to the surface or if buried lightly. It needs to be deep in order to have consistency on the flow of water without any possible movements that will dislodge it.

It’s a very secure position that the only time that its integrity will be affected in any way is when a ground tremor would occur.

Repairing your line is not just about finding the problem in your home. It also means expert plumbers will have to check the tapped lines for the problem. It also means that they will have to dig until they find the leak and assess it on what the next course would be. Service lines aren’t always replaced: To save money, our plumbers may cover the leak, if the line was dislodged, they may need to just plug it in again. If the leak is small and it can be covered, they will. But if the leak is too great, they may need to remove the line and replace it.

The bigger the job, the longer it will take to complete and the longer your water will be shut off.

Why is it underground: There are many reasons why plumbers dig below the ground, aside from keeping your tapped line safe and secured.

It’s also about not interfering with traffic, for your line not to get dislodged or broken by any random happenings like getting run over, getting cut by the gardener, or even be sabotaged.

Other information you should know about water service lines:

Older homes built before 1980 typically have pipes made of galvanized steel or cast iron. Unfortunately, these metals are more prone to rust and corrosion, therefore creating leaks at joints or in the pipe stem itself.

Most types of basic homeowner’s insurance do not cover the cost of a broken water service line, nor is this the responsibility of the city.

Most water line breakage is caused by tree root penetration, settling of the earth, corrosion, clogging due to buildup from hard water, and fundamental deterioration due to age.

Why is it Important to Get it Checked by a Professional and What to Expect

Always get your line checked: If you move into your new home and it’s not brand new, you need to consider the possibility of any possible problems.

Never believe the sales people that there is nothing to repair if there is indeed one. You can't really see it, especially since the pipes run underground.

So once you purchase the house, do some damage control and get it checked, it’s better thatyou get it sorted out while you're still in the process of moving, rather than you already moved and you experienced the inconvenience of getting a water line replacement.

Can you imagine not getting water even for a day?

Technicalities with diagnosing the repair: The technicalities with repair are pretty similar from job to job once the digging is done and the issue discovered. There will always be some factors that will cause delays in the repair, so please be patient while we fully assess the scope of the problem. Never get cheap materials: The last thing you want to have happen is a water line leak that was repaired but then creates issues again because of subquality materials. This will cause more costly repairs in the coming years.

Our service team only chooses products that are very high quality, it pays to spend more in one instance than spend more on repairs in the coming years.

Getting a licensed plumber: The first thing that you need to remember when you get a plumber for any installation or repair is get ones that are licensed and skilled in the job you need to get performed.

As much as you may want a neighbor to help you with your plumbing so you can save some money, if they aren’t licensed you can’t blame them if your plumbing falters. It’s expensive: Water service line repairs are costly, especially if the repair is an emergency, this means you need to get someone who is skilled at diagnosing the issue rapidly.

Do some initial inspection to help out: If you got a plumbing problem in general and not just a possible water line leak, it’s advisable that you do some initial checking before you call a plumber.

Sometimes while you're on the call, our team may need you to do something so they can better understand the situation.

An unprepared plumber means delayed work, and it’s not their fault. Because most of the time they will speculate on what is going on. Brace yourself for the repair: The issue with plumbing problems is that it will always cause an inconvenience. And depending on the gravity of the problem, you should prepare for it. Of course our plumbers will try their best to restore your water lines and plumbing in short order, but still, for major jobs like a major water service line repair, you should prepare

Let the Atlanta Plumbers at Assured Comfort Help You Out

A water service line can be minimal or big issue depending on the situation, but one thing is certain since it’s your main line to water, if it has a problem, it's serious and it’s considered as an emergency.

If you think you have a water line break, call us immediately.

Our knowledgeable plumbers will examine the site to diagnose the problem and propose a cost-effective and timely solution. Sometimes only spot repairs need to be done to fix an individual leak. Other times, entire sections or re-routing may need to be performed.

If if you need a water service line repaired in Atlanta let our plumbers come out to take a look at the job and get the issue fixed right the first time.

0 notes

justwhyandhow-blog · 7 years ago

Text

Atlanta Drain Cleaning Service

Assured comfort provides professional drain cleaning and plumbing services to homeowners in Atlanta because we understand that when your drains clog and pipe lines back up it can become a huge hassle and very frustrating.

Clogs are a nuisance that many home owners deal with.

Many individuals try plunging and pouring chemicals down the drain, but more often than not, the problem persists.

Assured Comfort's experienced plumbers in the Atlanta metro area can eliminate these annoying clogs once and for all with a professional drain cleaning.

Our plumbers specialize in eliminating the clog from any type of drain. Just a few of the drains our plumbers often clear include,

Toilets

Showers

Kitchen Sinks

Bathroom Sinks

Bathtubs

Dishwashers

Washing Machines

You don't have to continue to live with slow or clogged drains, Assured Comfort is here to help.

In addition to eliminating clogged and slow drains, a drain cleaning by our professionals can also improve your plumbing by:

Diminishing Odors - A build-up in your pipes can often times lead to a foul smell that is hard to get rid of. If you notice a bad smell coming from one of your drains, a cleaning can do the trick.

Preparing for Excess Use - If you are planning to host guests in your home, your drains and pipes will get more use than usual. If you have an on-going issue, or a potential problem, chances are it will flare up during this high use time. Be proactive and get a preventive drain cleaning ahead of your guests arrival to protect everyone from embarrassment later.

Schedule Appointment Online

Causes of Clogged Drains

There are a countless number of pipes in and beneath your Atlanta home.

These pipes can be very old, and although they are made to be very durable, these structures are not invulnerable to damage by exterior sources.

If you just moved into a new home or finished a remodel, it is always a good idea to check out the line condition of your pipes.

If you are experiencing an on-going problem, or a cable can not get through the clog, we have cameras that allow us to fully evaluate the extent of the backup.

There can be many different reasons for clogs, some of the most common causes our experienced plumbers see are,

grease

tampons

hair

soap build up

food build up

If you are experiencing a plumbing problem that needs to be addressed immediately or requires the services of a professional Atlanta plumber, contact Assured Comfort today for a drain cleaning.

We have years of experience in unclogging & cleaning sewer and drain lines. We always use the safest and best state of the art equipment, like hydro jetters, to clear your pipes.

No matter the problem, we’ve got the equipment and the trained technicians on the job to get things flowing back to normal quickly.

Call Atlanta's top drain cleaning company, Assured Comfort, today for help with your emergency plumbing needs.

0 notes

justwhyandhow-blog · 7 years ago

Text

Toilet Repair and Installation Plumbers in Atlanta

If your toilet is clogged or leaking and needs repairs, our Atlanta Plumbing company can help you today.

The toilet is one of those essential, can’t-live-without items in your home. But like anything that’s regularly used, toilets are bound to break down sooner or later.

The handle, fill valve, float ball, tank stopper, and flapper are just a few of the components that often wear down after years of regular use, and when they do, your toilet no longer functions like it should.

Or, toilet paper and other materials can build up in your plumbing system until one day your toilet is clogged and overflowing.

When these things happen, it can be extremely jarring to your lifestyle, habits, and of course, your bladder.

The sound of a running toilet can drive you crazy, and the mess and odors that can emanate from a clogged toilet are horrible.

If you’ve got standing wastewater in your toilet, or worse yet, wastewater backed up into your shower or sink, that is an obvious health hazard.

Not only can a leaking or overflowing toilet lead to serious water damage to your home and belongings, it wastes a lot of water and drives up your utility bill.

These are all reasons why people tend to panic whenever they have a toilet problem.

Of course, you may be able to fix some toilet problems yourself.

Homeowners often have the tools needed to cope with minor plumbing emergencies. But when it comes to serious toilet troubles, you’re far better off having a plumbing professional come in and take care of the problem.

Why Won’t My Toilet Flush?

There are many reasons why the toilet won’t flush.

Sometimes it’s a simple fix, the chain connecting the flush lever to the flapper might be broken or loose, which prevents the flap from being lifted up high enough to let water in the tank so the toilet can flush.

In that case, the chain may just need to be shortened or replaced.

Also, the flapper itself may be worn or broken and need to be replaced.

Or, you may just need to see if the water valve was accidentally turned off, or if it’s too low.

Turning the valve all the way up may remedy the problem. Then again, if you’ve taken all these steps and your toilet still doesn’t flush, it could be a bigger issue.

That’s when it’s time to get help from a plumbing professional.

A toilet bowl that empties slowly, also known as a “slow” or “weak flush,” is often the result of the jet holes under the rim of the bowl becoming clogged with minerals such as calcium, lime, or rust-buildup.

Over time, these deposits restrict and block water from flowing into the toilet bowl, causing a weak flush.

Many times this problem can be easily fixed by using a wire coat hanger to gently poke each flush hole to clear out any debris. This will allow the water to drain freely again.

Why is My Toilet Running?

When your toilet continues to run long after flushing, that can be due to a variety of problems.

Water may be leaking through a poorly fitting or defective flapper or float apparatus that fails to seal the flush valve between the tank and bowl.

Or, water could be leaking into the overflow tube. A defective toilet fill valve, float arm, tank stopper or inlet valve might also be the problem.

After you’ve looked at everything noted here, if your toilet is still running continually, your best bet is to call a plumber.

A running toilet is not a problem to ignore, since you could be wasting hundreds of gallons of water a day.

Why is My Toilet Clogged?

Excessive use of toilet paper, or attempting to flush anything down the toilet other than toilet tissue can clog pipes, which, after a flush, results in the dreaded overflow.

Flushing paper towels, wet wipes, diapers, sanitary napkins, and excess hair from a brush are all common culprits behind toilet blockages.

In homes with hard water, mineral deposits can build up, eventually making the toilet drain too narrow for solid waste to pass through.

If the clog is simply a blockage in the pipe below or immediately adjacent to the toilet, many blockages can be cleared using a plunger or toilet auger.

If that doesn’t work, pouring a pot of very hot (not boiling) water into the toilet will often dislodge the clog.

Chemical drain cleaners, on the other hand, are not always the best solution since they can damage pipes and cause them to deteriorate at a faster rate.

If you’ve used a plunger and perhaps hot water and your blockage still isn’t resolved, that indicates the clog is likely to extend far beyond the immediate area of your toilet, and may mean a blockage in your main sewer line.

In this situation, it’s best to consult with a drain-clearing professional. If you’re able to temporarily unclog your toilet, but new clogs reoccur on a regular basis, that’s also symptomatic of a serious underlying problem.

Why is My Toilet Leaking?

Another water-waster is a leaky toilet. A toilet may be leaking water in the tank or at the base.

If the leak is at the base, the wax ring (seal) between the bottom of the toilet and the closet flange (waste pipe) is broken, allowing water to seep out under the toilet whenever it’s flushed.

The toilet base probably isn’t totally attached to the floor, and may wobble when someone sits on it. If you’re a handyman, this is a relatively easy toilet repair; the wax ring has to be replaced, and the tee bolts that attach the toilet to the floor need to be tightened.

If you periodically hear a flushing sound coming from the tank when the toilet hasn’t been flushed, this is typically due to a very slow leak from the tank into the bowl.

This problem is usually caused by a bad flapper or flapper seat. The solution is to clean the flapper seat and replace it if it’s damaged or worn.

When Professional Plumbing Help is Needed

If you’ve tried doing the repairs and you haven’t solved the toilet problem, or if you’re simply not in a position to do the repairs yourself, it’s time to get professional plumbing help. If you live in the Atlanta metro area, the company to call is Assured Comfort.

Remember, big plumbing repair jobs need professional attention. Some issues are too involved, complicated or messy to tackle alone. Enlist the services of Assured Comfort for your safety and the integrity of your home. We provide fast, friendly, and efficient toilet repair solutions.

Whether your toilet lacks flushing power, leaks, or is overflowing, running non-stop or simply not working, you can rely on Assured Comfort to have your toilet running properly again in no time.

We will come to your rescue day or night to remedy the situation.

At Assured Comfort, our phones are manned 24-hours a day, 7-days a week to ensure we’re available when you need us.

If you have questions, want to schedule a maintenance visit or have a toilet emergency, give our Atlanta Toilet Repair and Installation team a call at 770-872-4168.

Let us handle the dirty work. You’ll be glad you did!

0 notes

justwhyandhow-blog · 7 years ago

Text

Atlanta Sewer and Sewage Repair Service

Any type of stoppage in your home’s plumbing system is unpleasant to say the least.

Clogged drains can lead to overflowing sinks and toilets, burst pipes, putrid odors and unsanitary messes. Yuck.

But as bad as those kinds of clogs are, even worse are sewer line blockages.

Sewer blockages in Atlanta, Georgia are “big time” problems because the sewer line is so vital to the overall functioning of your home’s plumbing system. Here’s why:

"All of the pipes connected to the sinks, washing machine, bathtubs, showers and toilets in your home converge into one main “trunk” or “sewer line” on your premises".

When wastewater is flushed or drained, it travels out and away from your house, via the underground sewer line on your property, to a large municipal sewer line and eventually to your city’s water reclamation facility.

That’s when there are no blockages and everything is running smoothly.

When wastewater flowing out from your house encounters a clog somewhere in the sewer line, it cannot go any further. Instead, the raw sewage backs-up into your home, usually entering through low points like basements, floor drains, toilets and septic tanks.

This can lead to damage in your home and to your possessions. It is not usually a quick-fix, either. In this situation not just one sink or toilet is stopped-up, but every drain in your home is affected.

Signs of Sewer Line Backups

You may wonder if you have an actual sewer line back-up, or just a single, regular clog. There are some big clues you should be aware of.

"If only your sink, tub or toilet is a problem, it’s likely to just be a clog in that drain. On the other hand, if multiple plumbing fixtures in your home are clogged or draining water slowly, then there’s a high possibility that you have a main sewer line clog".

Other possible signs of sewer back-up are:

Gurgling sounds come from drains, especially after you’ve used an appliance that uses water, such as the dishwasher or washing machine.

Sinks won’t drain and toilets won’t flush, even after plunging.

Water is coming out of the basement floor drain.

Pervasive, foul odors emanate from your drains—which is the smell of raw sewage.

Water backs-up in odd places when you use various plumbing fixtures. This is because your main drain line is clogged, so water has nowhere to go but back to your home, and it goes into the lowest point. If you flush the toilet, the water may start gurgling up your shower or bathtub drains. If you run your bathroom sink, the water may rise in the toilet next to it. When you use your washing machine, the toilet may overflow or water might back-up into the tub or shower.

Know When It’s Time To Call A Professional

If you think you may have a problem with your sewer line, the first thing you need to do is shut off the main water supply to your home. It is critical that you don’t use any more water as it could accumulate in the basement.

The other very important step you need to take is to schedule a sewer line inspection with a plumbing professional, to find out what is causing the problem. If you live in the Atlanta area, we invite you to call Assured Comfort.

When we come out to your home, we’ll first assess the situation. We’ll determine what’s causing the sewer backup and if it’s a problem that falls on your property line or the city’s.

If it falls on the city’s side, we’ll advise you to reach out to the city sewer department to have it fixed.

If the problem is within the homeowner’s property boundary lines, most municipalities consider the repair to be the homeowner’s responsibility.

We’ll give you our recommendations for repairing the back-up, including an upfront estimate for your approval before proceeding with any work.

Assured Comfort uses sophisticated diagnostic technology to identify the problem, and clear your drains rapidly and efficiently. This includes:

Video inspection cameras are used to quickly determine the condition of the sewer line and the location of especially troublesome clogs.

High-pressure “hydrojetting” services are used as a much more efficient alternative to standard augering and drain snaking procedures.

With hydrojetting, clogged drains can be cleaned-out using highly-pressurized water jets to thoroughly clean and scour the lines free of grease buildup, tree roots or other obstructions.

Our Underground Plumbing Technology

RIDGID’s SeeSnake Drain and Sewer Video Inspection System navigates drains smoothly and quickly.

The attached camera transmits high-quality footage to an aboveground monitor viewed by your plumber. There are different sizes of tools to best fit specific drains.

This is the first step in identifying exactly what is causing the drainage issues, whether it’s tree roots or other types of blockages.

This technology is complemented in the next step of the process: locating the problem. With RIDGID’s locators, the SeeSnake camera’s location can be precisely cited. Your plumber will be able to utilize mapping technologies to determine the depth of the sewer with the drainage problems.

The information can even be recorded on film for reference to give your plumber all the information he needs to combat each specific drain.

While there’s never a good time to experience drainage issues in your home, underground plumbing and drain cleaning can be performed before problems ever arise.

If you suspect that clogged main drains might be at play in your home, look for signs such as toilets not flushing correctly and drains feeding up through other sinks and showers.

Assured Comfort is proud to now offer underground plumbing and drain cleaning using RIDGID’s SeeSnake Drain and Sewer Video Inspection System to make this process easier and more efficient.

What Causes a Sewer Line Back-Up?

When sewers back-up, it’s usually due to one of four causes:

Clogs

When you put “non-biodegradables” down a drain, not only can it affect the pipes inside your house, it can also causes blockages further down the system, in your underground sewer line.

Some of the worst offenders are flushing baby wipes, diapers and feminine hygiene products down toilets, and pouring grease or oil down kitchen sinks.

Oils are problematic because they combine with other food debris and harden in the pipes, creating an immovable clog.

So are pastas, rice and bread crumbs, as these foods can expand with water and stick to the inside of pipes. Clogs can also occur outdoors; heavy rains can blow leaves, dirt and debris into outside drains, causing stoppages there.

Tree Roots

Tree and shrub roots seeking moisture can penetrate into cracked or collapsed sewer lines. The roots may start out small. But as the tree grows, the root grows, and the pipe eventually becomes blocked. Tree roots can also wrap around sewer lines and crush them.

Broken or Collapsed Sewer Lines

If a sewer line ruptures or collapses, the sewage won’t be able to properly drain through the system, which will cause back-ups.

Typical causes of broken pipes include old age and poor installation of the pipes, and excessive traffic on the ground above.

The type of plumbing that is most susceptible to breakage are clay (which is very porous) and cast iron pipes, which is what’s typically found in older homes. (However the PVC or plastic piping used in newer homes is much more durable.)

Septic Problems

If the septic tank is clogged or full, this could lead to sewer back-up. If your Septic Tank does back up, it can lead to severe property damage and an expensive repair bill.

Contact Atlanta's Sewage Treatment Specialists

If you think that you are having a Sewage Issue in the Atlanta, Georgia area, do not hesitate to contact the Sewage Treatment Specialists at Assured Comfort.

Our team of trained professionals will use their extensive training and state-of-the-art equipment to solve any sewage problems you are having.

To speak with one of our Atlanta Sewage Treatment and Repair specialists, call Assured Comfort at (770) 942-1938 or schedule an appointment online and save 10%.

0 notes

justwhyandhow-blog · 7 years ago

Text

Water Heater Repair & Installation in Atlanta

If you’re like most homeowners, you probably don’t give your water heater a second thought. That is, until one morning when you turn on the shower and discover to your dismay that there’s no hot water.

Then your hot water tank is suddenly on the forefront of your mind.

It’s important to understand that water heaters, like all appliances, eventually wear out.

Corrosion and sediment buildup can cause the components that heat the water to stop working.

Most water heaters have an expected service life of no more than 10 to 13 years, depending on system use, local water chemistry and maintenance provided.

When your water heater fails, a brand new water heater may be called for, especially if your existing unit is very old.

Other times, a simple repair will do.

Besides lack of hot water, there are some other, more subtle signs that your water heater needs to be serviced. These include:

Water leaks around the base of water heater.

Slow hot water recovery after a lot of hot water is used (e.g., after someone takes a shower).

Rumbling, popping or banging noise from inside the water heater.

High pitched, whining sounds from your pipes.

Flecks of rust, dirt or other debris in your water.

A foul, “rotten egg” smell from the water.

If you see any of these signs, it’s time to call for help.

When your water heater is running at optimal performance, it’s not only good for water use, but it’s also good for saving money on your energy bills.

Like HVAC systems, a poorly functioning water heater can affect your utility bills. Your Assured Comfort plumbing experts will thoroughly examine your water heater, and explain the issue and your repair or replacement options.

Whatever your hot water needs may be, Assured Comfort has the right solution for you.

Water Heater Repairs

Keep in mind, when it comes to water heater repairs, this is not the time to do it yourself.

Water heaters are not simple appliances. Making the repairs yourself can be more difficult than you think, and pose dangers like shock, gas leaks, carbon monoxide poisoning or even explosions. Don’t take unnecessary risks.

If your water heater is malfunctioning, give Assured Comfort a call.

Assured Comfort repairs and services all brands of residential and commercial hot water heaters.

Our technicians are equipped and trained to solve even the toughest of water heater problems, and will work quickly and efficiently so that your water heater is up and working normally again.

We are ready to service your water heater needs whenever they may arise, day or night.

If replacing your equipment is the most cost-effective solution, Assured Comfort’s technicians will walk you through the types of water heaters that are available, and the features of each so that you can make the selection that’s right for your lifestyle and budget.

We sell a complete line of gas and electric hot water heaters from top manufacturers like Rheem, Bradford White, Bosch, State, Reliance, Noritz and A.O Smith.

You can choose between conventional water heaters which use a storage tank, and tankless hot water systems.

So what are the differences in cost and efficiency between Standard and Tankless Water Heaters?

Standard Storage Water Heaters

When most people envision a water heater, it’s the standard tank water heater that generally comes to mind.

This is the type of water heater that most people have grown up with, and it is still the most common type of water heater today.

Standard storage water heaters store and heat water in a reservoir.

When water is used, the tank is refilled with water from your water source. This new water is heated and stored, and the cycle continues.

The water within the tank is continually warmed to a set temperature. Standard water heaters store from 20 to 120 gallons of water, depending on the size of the tank.

This type of water heater has improved a lot over the years, and today’s models are more efficient and reliable than ever before.

Tankless Water Heaters

Tankless water heaters provide hot water as it is needed, and do not store hot water for future use like conventional storage tank water heaters do.

When a hot water faucet is turned on, water flows through the tankless water heater. A sensor detects that hot water is being demanded, and activates the heating device.

The water flows through the internal heating element, exiting the unit at the desired temperature.

The tankless water heater stays on until the hot water faucet is closed. As soon as the flow sensor detects that water is no longer flowing, the heating element shuts off.

Tankless systems cost twice as much as traditional tank units, however because they only heat water only at the time it is being used, they are far more energy-efficient.

This can potentially reduce energy costs by as much as 25 percent.

Water Heater Maintenance

Assured Comfort recommends homeowners have their water heaters cleaned and inspected annually, to keep them in tiptop operating condition.

During an annual tune-up, our expert plumbers will make a careful check of your water heater to make sure it’s working properly and safely.

This includes inspecting the pressure relief valve, burner assembly, filters, anode rod and power supply that’s heating the water.

If needed, we will flush out the tank and remove any sediment at the bottom of the tank. Any components that have worn out will be replaced.

We do all this to ensure that your water heater continues to run efficiently. Water heaters that are not well-maintained will succumb to wear-and-tear more quickly.

If you need water heater repair or installation services in the metro Atlanta area and surrounding cities throughout Georgia, Assured Comfort Heating, Air, Plumbing is ready to help serve your needs.

Give us a call today at 770-872-4168 and let us know how we can help you.

Our goal is to provide you with the best service possible, so you never run out of hot water again!

Let our Atlanta Water Heater Repair and Installation Team help your today.

Schedule service online and save 10% on your service.

0 notes

justwhyandhow-blog · 7 years ago

Text

Heating Tune Up and Furnace Maintenance Service Company in Atlanta

https://www.assuredcomfort.com/heating/heating-tune-ups/A heating service we offer our Atlanta customers is known as furnace tune ups, important for maintaining maximum efficiency and output.