jiad-parts-store
JIAD PARTS STORE
55 posts
auto parts and tools; Marine accessories and tools; industrial accessories and tools; Garden Products and Tools
Don't wanna be here? Send us removal request.
jiad-parts-store · 11 months ago
Text
For No Fault Heater and PDR Heater, Compatible with Hot Spring, Limelight, Hot Spring pre 89, Tiger River models from 2002+ model years.
Newly designed and with O-ring, includes 1/2" thread 79005 Hi-limit Sensor w/2-Pin Molex connector (small port). 5/8" thread 79006 Temp Sensor w/4-Pin Molex connector (larger port). replaces the obsolete 39204, 39205, 39525, 39530.
0 notes
jiad-parts-store · 11 months ago
Text
HAXHLI1930 sensor and FDXLHLI1930 high limit replacement kit is compatible with Hayward Universal H-series Low Nox pool heater models H150FDN, H150FDP, H200FDN, H200FDP, H250FDN, H250FDP, H300FDN, H300FDP, H350FDN, H350FDP, H400FDN, H400FDP, H500FDN, H500FDP.
135 degree Fahrenheit high limit heater part kit is fit for Hayward Universal H-Series H150FD, H200FD, H250FD, H300FD, H350FD, H400FD, H500FD Low Nox Pool Heater.
Tumblr media
0 notes
jiad-parts-store · 11 months ago
Text
Tumblr media
34-01395-K Sensor Kit 2 Pin High-Limit Thermistor Sensor and 4 Pin Control Thermistor Sensor with O-Rings Fit for Hot Spring, for Tiger River, for Limelight Spas 2002-Current Replaces 39204, 39205
For No Fault Heater and PDR Heater, Compatible with Hot Spring, Limelight, Hot Spring pre 89, Tiger River models from 2002+ model years.
Newly designed and with O-ring, includes 1/2" thread 79005 Hi-limit Sensor w/2-Pin Molex connector (small port). 5/8" thread 79006 Temp Sensor w/4-Pin Molex connector (larger port). replaces the obsolete 39204, 39205, 39525, 39530.
79005 High-Limit Thermistor Sensor is a safety device designed to communicate with the system to shut down the heater if the water temperature exiting your heater exceeds 118 degrees F.
79006 Control Thermistor is a safety device that measures the water temperature of your spa and communicates that temperature reading to the Motherboard.
Screws into the No Fault Heater Housing (hand tight only) and then plugs directly onto the motherboard inside the lQ 2020 control box. Always replace thermistors in pairs (79005 & 79006).
[Tips]: Molex to AMP plug adapter cable not included with kit. Not compatible replacement for pre-2002 model years as they require the old-style larger AMP connectors.
0 notes
jiad-parts-store · 11 months ago
Text
Tumblr media
Front Axle Knuckle And Tube Seal Kit: Fits for Ford Super Duty F250 F350 F450 F550 Excursion 4X4 trucks with front leaf spring Dana 50 And Dana 60 Solid Front Axles 1998 1999 2000 2001 2002 2003 And 2004.Also fits For Ford Excursions F250 And F350 3/4 Ton And One Ton 4x4 Trucks With Front Leaf Spring Suspension.
Thrust Washer Snap Ring Kit: Fit for Ford Super Duty F250 and F350 3/4 and one ton 4x4 Trucks 1998 1999 2000 2001 2002 2003 2004 Excursions In 2000 2001 2002 2003 2004 2005.
2002692 Outer Stub Axle Shaft Kit: Fit for Ford 1998-2004 SUPER DUTY F250 F350 F450 EXCURSION 3/4 and 1 ton 4X4 trucks with Dana 50 / 60 straight front axle. ( Front axles with standard leaf spring suspension ONLY.)
The package contains the following accessories: 3x #50491 Outer Axle Seal; 2x #50381 Outer Tube Dust Seal (ID = 2.345 OD = 3.125); 2x #41784-2 Vacuum Seal O-Ring; 701166 XDifferential Rebuild Components (4x circles, 2x hexagons); 2x 620142 Axle Shaft Lock Snap Rings; 2x 47766 Differential Rebuild Components; 1x 2002692 Outer Axle Shaft
0 notes
jiad-parts-store · 11 months ago
Text
Fitment: Perfectly fit for 1980-1998 Ford F-250 F-350 2WD and 4WD XL, XLT, XLS, XLT Lariat, Ranger, Ranger Lariat, Ranger XLT, Base, Eddie Bauer, Lightning, Custom, Special. Each part is manufactured to OEM specifications and precision-engineered to be a direct replacement for factory mounts.
Package Details:
6 × Upper Body Mounts
6 × Lower Body Mounts
6 × Metal Sleeves
2 × Clipped Washers
26 × Washers
6 × Bolts
6 × Lock Nuts
0 notes
jiad-parts-store · 11 months ago
Text
✅APPLICATION: Perfectly fits for 1973-1974 Buick Apollo, 1967-1981 Chevrolet Camaro, 1968 Chevrolet Chevy II, 1969-1974 Chevrolet Nova, 1973-1974 Oldsmobile Omega, 1967-1981 Pontiac Firebird, 1971-1974 Pontiac Ventura.
0 notes
jiad-parts-store · 11 months ago
Text
Fitment -- Widely fit for GMC Acadia 2007-2017, For Chevrolet Traverse 2007-2017, For Saturn Outlook 2006-2010, For Buick Enclave 2008-2017.
Function -- Designed to replace the original aluminum rear line, upgrade to our high pressure rubber made line to eliminate the air leaks and get a better AC performance.
0 notes
jiad-parts-store · 11 months ago
Text
【Application】Fits for all Alpha drives 1991 and newer. Also suitable for Alpha One Gen One & two which is have trim cylinders 16-3/16".
【Replacement】Port down hose 32-99903 fits trim cylinder casting 98703, stb. down hose 32-99902 fits trim cylinder casting 98704. Line 32-864960 / 32-999021 replaces for Starboard, Line 32-99903-1 / 32-864959 replaces for Port, (2 shorter hoses) Line 32-99904 / 32-99904Q replaces for Trim Cylinder to Connector.
0 notes
jiad-parts-store · 11 months ago
Text
Fit for Ford V6 3.5L & 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor; for Lincoln MKS, MKT, MKX, MKZ, Navigator; for Mercury Milan, Sable, Please kindly confirm more compatibility details on the below product descriptions before purchase.
0 notes
jiad-parts-store · 2 years ago
Text
Tumblr media
适合:Safe-T 机械转向、齿轮齿条机械转向、Baystar (HH4314-3);适合:NFB 无反馈转向(所有舵)、SeaStar 液压转向 1991 年至今;适合:SeaStar Pro 液压转向、Command 200 机架和小齿轮
指尖信号灯样式倾斜千斤顶板杆控制双开关控制两个功能(发动机配平和千斤顶)。这有助于您立即将开关关闭在其中心(静止)位置,并在上下方向上启动。Blinker Style Trim Switch 控制两个功能 - trim 和 jack plate,方便您将双手放在方向盘上专心驾驶。
耐用的聚酯薄膜贴花,允许标记开关功能;重型线束,颜色编码以匹配现有的插孔板布线;不锈钢支架适合大多数转向系统,并可针对普通或深盘车轮进行调整
防紫外线 ABS 开关盖与仪表板融为一体;瞬时开关在其中心“静止”位置关闭;上下方向驱动;坚固的融合涂层支架适合大多数流行的转向挡板,并且可以针对普通或深盘方向盘进行调整。可作为两极,四功能
Tumblr media Tumblr media Tumblr media
0 notes
jiad-parts-store · 2 years ago
Text
Tumblr media Tumblr media
LOWER SHIFT CABLE ASSEMBLY KIT Fit for Mercury MerCruiser Alpha One, Alpha One Gen Two, R, and MR drive;MC-I, MR, Alpha (1978 & newer);Alpha One Gen I (1983-1990);Alpha One Gen II (1991-2016);
Replaces:Mercruiser/Quicksilver 865436A02, 19543A10, 19543A8; GLM 21451;Sierra 18-2603;Mallory 9-72100;
Kit Replaces: Shift Cable - Part # 41951A1;Slide - Part # 33981T1;Set Screw - Part # 10-31700;Guide - Part # 43433;Anchor - Part # 43436;Set Screw - Part # 10-20518;Wrapping - Part # 38473;Insert - Part #14705;S.S. Wire - Part # 21464
Material - Made of Rubber, steel, copper, plastic.For rusting resistance and long service time.Durable and anti-rust.Built for long life and maximum performance in all weather conditions to below zero Fahrenheit
1 note · View note
jiad-parts-store · 2 years ago
Text
Tumblr media Tumblr media Tumblr media Tumblr media
Stern Drives Prop Nut Set Compatible with MerCruiser Bravo 3
BRAVO 3 PROPELLER FRONT NUT:Part #: 8M0105210; uses 2-3/4" Socket; Bravo 3 forward facing propeller nut designed to fit behind the front propeller on a Mercruiser Bravo III Sterndrive.
Stern Propeller Nut for Bravo III Drive:Part #: 11-862907; uses 1-7/16 socket; this stern propeller nut is designed to fit on the back of the rear propeller (second propeller) of a Mercruiser Bravo 3 stern drive
Stern Drives Front Nyloc Nut and Stern Propeller Nut Made of high quality copper, Not easy to rust, anti-corrosion and has good thermal conductivity
1 note · View note
jiad-parts-store · 2 years ago
Text
Tumblr media Tumblr media Tumblr media
Bearing Carrier Tool Fit for Mercruiser Bravo Three 3 & Blackhawk Drive Bearing Carrier Tool
Bearing Carrier wrench Tool Installs and removes the bearing carrier on the Blackhawk drive units. Also, use with 91-805382T Bearing Retaining Tool to remove drive shaft retainer nuts in Bravo triple drive units.
Bearing carrier tool replaces part #91-805374, 805374.
Marine wrench tool Made of high quality GB 40CR alloy steel, CNC process precision manufacturing,sturdy and durable, impact-resistant, corrosion-resistant.
0 notes
jiad-parts-store · 2 years ago
Text
Tumblr media Tumblr media
0 notes
jiad-parts-store · 2 years ago
Text
Tumblr media Tumblr media Tumblr media Tumblr media
Direct replacement for Mercury OEM parts 91-849154T1 and Yamaha OE YB-06139 and AMT0023.
JIAD flywheel remover assembly tool works on non Verado Mercury (1.5"x16) and Yamaha Outboards.
This heavy duty specialty tool is necessary when removing the flywheel to replace a stator. (Attention: P/N MT0024 is required for Verado and P/N MT0025 is for Yamaha 5.3 V8, 4.2 V6)
Made of high quality steel with zero friction ball bearing head to provide smooth and powerful operation. Manufactured with slick finish, durable and anti corrosion for lasting service time.
0 notes
jiad-parts-store · 2 years ago
Text
Tumblr media Tumblr media
Trim Cylinder RAM Rebuild Kit Seal Repair Kit Fits for the Volvo Penta boat model.
Direct Replacement Alternatives to Volvo 3860881.
This product is a pair of trim tilt lift cylinders for the Volvo Penta boat model.
All end caps / glands are made of superior-quality Aircraft Grade Aluminum. equipped with Viton and/or High polyurethane seals according to application pressure/seal requirements.
1 note · View note
jiad-parts-store · 2 years ago
Text
Tumblr media Tumblr media
Trim Cylinder RAM Rebuild Kit Seal Repair Kit Fits for the Volvo Penta boat model.
Direct Replacement Alternatives to Volvo 3860881.
This product is a pair of trim tilt lift cylinders for the Volvo Penta boat model.
All end caps / glands are made of superior-quality Aircraft Grade Aluminum. equipped with Viton and/or High polyurethane seals according to application pressure/seal requirements.
0 notes