gosagar1993-blog

[gosagar1993-blog]

Acrylamide Monomer Market 2014 | Business Analysis, Scope, Size, Overview, and Forecast 2025

Acrylamide monomer market is produced by hydration of acrylonitrile (ACN). It is the raw material to produce polyacrylamide and is manufactured by more than 15 major producers.Biosynthetic route is the most widely used process for acrylamides commercial synthesis. It can also be synthesized by synthetic route. The bio-synthesis route has been preferred over the synthetic route due to its cost-efficiency. It uses immobilized nitrile hydratase biocatalyst while the synthetic route uses the costlier copper oxide catalyst. Polyacrylamide is the principal derivative of acrylamide accounting for 90% of its consumption. Any impact on polyacrylamide end-use applications market like water treatment, oil production and others will impact the global acrylamide demand.

The demand for acrylamide monomer market has been growing between 3% to 5% during the last few years and the global demand in 2018 was estimated to be around 1703 kilotons. About 45% of this demand comes in from water treatment applications while petroleum and paper & pulp together accounts for 45%. The remaining demand is mostly from other small volume applications like textiles and mineral processing.  The water treatment applications are expected to witness the fastest growth during the forecast period followed by polyacrylamide applications in the petroleum industry to enhance oil recovery and in other petroleum production processes.

Historically, Asia-Pacific has been the largest demand region as well as the largest producer region and is likely to remain so even in the forecast period. The global acrylamide market is driven by Asia-Pacific, particularly due to strong demand for water treatment applications in China, followed by major demand in Japan and other developing Asian countries on the back of presence of large paper and pulp industries. The region accounts for about 57% of the global acrylamide consumption and China alone holds for 79% of total regional consumption. This (China’s consumption) translates to roughly 45% of the global demand. North America is second largest region accounting for 23% closely followed by Western Europe with a 17% share. Central & South America, Central & Eastern Europe and Middle East & Africa together account for 3% of total global consumption.

Acrylamide production is concentrated majorly in three regions viz. North America, Western Europe, and Asia-Pacific. China is the largest producer of acrylamide, accounting for about 62% of the global acrylamide production mainly dominated by local producers. SNF, CNPC, and Kemira are the major players of acrylamide globally. SNF is the largest manufacturer of acrylamide with more than 5 production locations globally. New major capacities have been announced in China and most of these new upcoming capacities will be based on bio-synthetic routes. It is to be noted that most of the world-scale plants are located near to the end-use industries and this trend will continue for all new projects during the long-term forecast. The oversupply situation to an extent is more likely to offset with robust demand owing to stringent policies on water-treatment, increase in oil & gas production and restructuring in the major economies as they step-out of the looming financial slow-down. In the long term forecast to 2025, the global acrylamide market is expected to grow at an annual average of 3.6%.

For More Report:-https://prismaneconsulting.com/reports

[gosagar1993-blog]

Germany PTFE Market 2005 | Business Analysis, Scope, Size, Overview, and Forecast 2017

Germany is the largest consumer of PTFE in Western Europe accounting for around 42% of the PTFE demand in the region owing to its vast automotive, electrical & electronics, chemical processing and other industrial & manufacturing sector. The country’s chemical industry is the biggest in the region and third largest in the world. Germany is also the major producer of chemicals, polymers, electrical & electronics in Europe. Electrical & electronics is Germany’s second largest industrial sector accounting for around 11% of total German industrial production, and about 3%of its gross domestic product (GDP). In terms of application, more than 40% of PTFE is utilized in chemical processing industry, 19% in mechanical industries,and 16% in electrical and electronics market.

Demand for PTFE in Germany was estimated to be around 13.1 kilotons in 2017 which is met by Dyneon, the only major player in Germany with total capacity of 15.8 kilo tons. The demand is likely to reach 16.8 kilo tons in 2025 growing at CAGR of 3.2% per year. Germany exports to almost all other countries in the Europe. Italy, USA and France are the major export locations of Germany accounting for 45% of the total exports.

Germany PTFE Export Location (2017)

Exports from Germany have been consistently high in comparison to its imports. Exports from the country range from 8 to 11 kilo tons between 2005 and 2017, except in 2009, where the exports fell to around 6 kilo tons. In the same period, Imports in Germany range from 5 kilo tons to 9.5 kilo tons with an average price of around $ 15.2/kg.

For More Reports:- https://prismaneconsulting.com/reports

[gosagar1993-blog]

CYCLIC OLEFINIC COPOLYMERS MARKET 2014 | Business Analysis, Scope, Size, Overview, and Forecast  2025

Cyclic Olefinic Copolymers Market were commercially made available by pilot-scale plant in Japan until Topas Advanced Polymers started large scale COC plant in Oberhausen, Germany. The plant capacity is estimated to be 30 Kilo Tons and global capacity of COC now is around 56 kilo tons. Cyclic Olefinic Copolymers are widely used in packaging, medical & healthcare, optical & optics, electronics and others. COC has superior optical properties with high temperature resistance and excellent moisture barrier characteristics. Major demand drivers are optical films and pharmaceutical packaging which has driven COC market at a CAGR of 5% during 2015-2017.Other major COC manufacturing players are Zeon Corporation, Mitsui Chemicals and JSR Corporation with combined capacity of 26 Kilo Tons as of 2017. The COC market price varies between 5-6 $/Kg and is expected to rise in forecast period due to increasing demand.

Zeon Corporation: 20 Kilo Tons

Mitsui Chemicals: 3 Kilo Tons

JSR Corporation: 3 Kilo Tons

Image section

COC Market by Major Applications

Cyclic Olefin Copolymers (COCs) find application in the following:

Packaging

Medical & Healthcare

Opticals & Optics

Electronics

Others

Packagin

COCs are most commonly used as modifiers in the manufacture of packaging films. Properties such as higher flexibility, moisture barrier, heat resistance and stiffness of polyethylene are enhanced when COC is added. Moisture barrier of COC is roughly twice and five times than that of HDPE and LDPE respectively. Its low cost in packaging has found numerous applications in food, healthcare, cosmetic, shrink films, labels, lamination, protective or bubble packaging and in forming films. COCs are highly used in pharmaceutical packaging.

Medical & Healthcare

The high moisture barrier, purity, clarity, and sterilization qualities of COC resin makes them an excellent replacement for glass and are ideally suited for pharmaceutical products. They are widely used in production of syringes carrying insulin & other protein drugs, cartridges, and vials as they increase the shell life and purity by being non reactive to the medication, low weight and are less brittle.  Medicinal applications that require strong chemical resistance such as nicotine patches and pouches are also made by using COC. Other uses include diagnostic applications such as in cuvettes and micro plates due to their high UV transmission property.

Optical & Optics

Properties of COCs like shatter resistance, high heat resistance, low specific gravity, high transparency, and low water absorption makes them optimum in the use of  printer lenses, CD & DVD pick up lenses, digital camera lenses, projector lenses, LED lenses, contact lenses, mobile phone lenses, light guide panels for LCDs, reflection films, automotive parts and others.

Electronics

COCs are used in printed circuit boards (PCBs) and as an insulating material at high temperatures, excellent isotropic dielectric properties, thermo-mechanical property, electrical insulation, adhesion, low moisture uptake and low stress.

For More Reports:- https://prismaneconsulting.com/reports

[gosagar1993-blog]

SUPERABSORBENT POLYMERS MARKET 2014 | Business Analysis, Scope, Size, Overview, and Forecast  2025

The global Superabsorbent Polymers market has shown moderate growth rates largely driven by rising demand from different end-use industries and from countries like in China, India and other Asia-Pacific countries (Specially South East Asia). Historically, the economically mature regions like North America and Western Europe have witnessed below average growth rates and will continue to lose their demand market share to Asia-Pacific countries like China and India. At the same time, Central & Eastern European demand is likely to grow at a higher rate of about 6.0% in the long term forecast albeit from a low base. The Central & South American region is forecast to grow at CAGR of around 5.8% till 2025; however, it will completely depend on how South American countries like Venezuela are able to cope up with the regional political uncertainties, inflation and other economic problems and the economic recovery of Brazil. The Middle Eastern & African markets, starting from a very small base, have seen the some of the highest growth rates, and are expected to grow at an annual average of 7.1% making the region witnessing some of the highest CAGR at a global level.

Global SAP demand was almost 2250.7 kilo tons in 2014 and it has grown by an average annual rate of slightly over 6.8% since 2014. The global SAP market is expected to grow at an annual average of around 5.7% during the forecast period till 2025.

SAP is primarily used in a number of hygienic and personal care products, such as baby diapers, adult incontinence products and sanitary napkins. Collectively, these uses make up approximately 94.9% of global SAP use. Amongst all these applications, the use of SAP in baby diapers is predominant. It accounts for around 80.7% of global SAP demand. The percentage of SAP use for disposable diapers is even higher in developed countries such as Japan, the US and Western European countries, and lower in countries that are still adopting disposable diapers. Diaper demand is also high in regions of higher population like China and India as well as developing regions like Brazil and Russia which show relatively low penetration by SAP, but may represent high potential for demand growth mainly due to higher disposable incomes, growing awareness of the need for good hygiene and an increasing number of working mothers.

The baby diapers sector is the fastest growing application representing about 80.7% of global SAP demand. Sanitary Napkins are the third largest sector, steadily growing with a roughly 5.8% share of global SAP demand. The second largest application is for Adult incontinence products that account for 8.3% share. The remaining SAP is used in agriculture, packaging materials, technical applications and other miscellaneous applications.

For More Reports:- https://prismaneconsulting.com/reports

[gosagar1993-blog]

POLYPHENYLENE SULPHIDE MARKET 2005 | Business Analysis, Scope, Size, Overview, and Forecast  2020

Exceptional heat, chemical and fire resistant properties make Polyphenylene Sulphide Market a material of choice in automotive, aerospace and coal fired power plant industries. Polyphenylene Sulphide manufacturers are concentrated majorly in Japan and U.S. while China is expected to remain the largest consumer in long term forecast.

As against production capacity rise of PPS Market by 265%, the demand has increased by 126% between 2005 and 2017. This suggests an unprecedented acceptance of PPS as an engineering plastic in automotive,electrical & electronics, aerospace and filter media applications.

Polyphenylene sulfide is a high temperature engineering plastic.It is best known for its light weight ability, high temperature resistance,chemical resistance, mechanical strength, abrasion resistance, high dimensional stability. PPS has both thermal degradability and chemical reactivity. Globally the PPS market is witnessing growth on account of increasing applications and growing demand in Asia-Pacific and other developing regions. It serves end-use industries such as Automotive, Industrial, Filter Media, Electrical & Electronics, Aerospace and Others. Most of the Polyphenylene sulfide resin manufacturers are in Japan, South Korea, United States and China.

For More Reports:-  https://prismaneconsulting.com/reports  

[gosagar1993-blog]

BUTADIENE MARKET Expand with Significant CAGR During 2014-2025

At a global level, the butadiene demand has grown lower than the world GDP growth. Butadiene Market is not very closely related to GDP growth like that of commodity polymers that are directly correlated to the economic growth. Most of the butadiene is produced a by-product/ co-product and various other factors including production of ethylene and demand from other end-use industries cause a change in butadiene trade dynamics.

Crude C4 supply patterns are somewhat different between various regions and countries. In Asia, and Europe naphtha is the most common feedstock while in North America, steam cracker feed slates can vary depending on relative production economics.

Over 95 percent of the butadiene is produced as a byproduct of ethylene production from steam crackers and recovered via extractive distillation. In certain parts of the world there are still some production units based on on-purpose routes and this is expect to grow in the long-term forecast.

The supply of mixed C4s and butadiene is not driven by it consumption but also the consumption and production of Olefins as butadiene is mostly a co-product. Historically the butadiene market was either oversupplied or undersupplied. The market has never been balanced. During a situation of deficit, butadiene is mostly extracted from the C4s produced by the steam cracker while during ample of supply, producers use different mechanisms for processing C4s with associated values without producing Butadiene. This trend of not so balanced market will continue in the forecast period though the market will approach to nearly balance scenario.

As most of the global butadiene is produced by extracting it from crude C4s which are produced as result of cracking heavy feedstock such as naphtha. As the crackers are shifting towards lighter feedstocks it is believed that the butadiene production from ethylene co-productions will become insufficient which will led to an increase in on-purpose butadiene production. This will most likely push the butadiene prices upwards as more on-purpose butadiene capacities come on-stream.

In the last 5 years, On account of the shale gas advantage, the crackers in the US have switched to lighter natural gas-based feedstocks leading to a decline in C4 production. In China, new on-purpose butadiene production through oxy-dehydrogenation process are likely to come up on a commercial scale. Hence during the forecast period, on-purpose technologies are expected to be important though its economics are higher in the current scenario.

The global automotive industry has fully recovered from the economic recession of 2008 -2009 and the sales and profit have been higher than the pre-crisis level right from 2012 onwards. The major drivers of the butadiene industry include increase in the automotive and tyre industry.

There has been a shift of the automotive industries and market from Western Europe and USA to Asia-Pacific.

China, India and South Korea are expected to witness strong growth in the automotive sector which will drive the demand for butadiene derivatives.

Strong automotive sales in North America and Asia-Pacific countries like China and along with increased demand for electric vehicles are expected to be key demand drivers for butadiene derivatives.

In 2018, SBR applications constituted the largest demand for butadiene accounting for nearly 29% of the total demand followed by PBR accounting for around 24% of the total demand. ABS end-use together accounted for about 15.7%. All other applications including adiponitrile, nitrile & polychloroprene elastomers and others constituted between 5% to 8% each of the total demand.

For More Reports:- https://prismaneconsulting.com/reports

[gosagar1993-blog]

ADIPIC ACID MARKET 2014 | Business Analysis, Scope, Size, Overview, and Forecast 2025

More than 50% of Adipic acid Market is globally consumed for the production of Polyamide 6, 6. The shift of exports can be seen in adipic acid market where China is leading the export market due to several capacity additions in the last 10 years. China started significant export of adipic acid in 2010 and became net exporter in 2012. The exports have increased from 31 kilo tons in 2010 to around 320 kilo tons in 2017. This demographic shift of export has also led to some capacity rationalization in the U.S where In vista closed its adipic acid plant situated at Orange, Texas in 2015.

China Adipic Acid Trade Data(2000-2017)

Asia Pacific leads the consumption of adipic acid accounting for 44% of the world consumption followed by Western Europe and North America with 26% and 23% respectively. Other regions account for just over 7% of the global consumption.

Adipic Acid Regional Demand – 2017

The main use of Adipic acid is for Nylon 6, 6 resins and fibres with much lesser amount going into polyester polyols used in polyurethanes and into adipic acid esters, to be used as specialty plasticizers. Nylon 6, 6 yarns are used in non-staining carpets, home furnishing, apparel, and tire cord.Other fibres uses are in finishing lines, brush bristles, parachutes, and backpacks. Nylon 6, 6 accounts for the largest share for adipic acid and it is expected to continue to remain in the long-term forecast. Globally, higher production of industrial & textile fibres and carpet is likely to push the demand for adipic acid. Improvement in the global automotive production and housing market along with consumer spending is further likely to push the demand northwards in the short and mid-term forecast.

The global adipic acid market is forecast to grow between 2% to 2.5% in the long-term forecast till 2025 as demand from Asian countries specially China where it is estimated to grow in line with the GDP growth in the short and long-term forecast.

For More Reports:- https://prismaneconsulting.com/reports

[gosagar1993-blog]

GLOBAL POLYACETAL MARKET Analysis, Growth Drivers, Trends, and Forecast till 2025

The Global POM Demand in 2017 was estimated to be about 1276 kilotons which has grown by at an aggregate rate of 4.5% per annum between 2005 and2017. Global demand is expected to grow to nearly 1693 kilo tons by 2025, witha growth rate of 3.6%

Polyacetal(POM) Demand-Supply Analysis

Utilization rates for POM globally averaged nearly at about 73%between 2005 and 2017. The utilization rates peaked to 87% in 2007 beforedeclining to 71% in 2009 mainly due to decline in demand as well as a result ofnew production capacities coming on-stream. In our short term forecast to 2020,we expect utilization rates to remain around low 70s.

Top eleven producers hold about 70% of the global production capacity and with at least fifteen other companies producing smaller quantities.

The largest producers are of POM copolymers while only two plants produce POM homopolymer.

Five of the largest eleven POM producers have production facilities in USA, Western Europe and Asia.

     For More Reports :- https://prismaneconsulting.com/reports

[gosagar1993-blog]

LIQUID CRYSTAL POLYMER Analysis, Growth Drivers, Trends, and Forecast till 2025

Liquid Crystal Polymers (LCP) are aromatic polyesters by composition that exist in liquid crystal state. They exhibit a partially crystalline structure and their molecules are largely aligned. They have remarkable physical properties and chemical inertness by the virtue of which are capable of replacing metals, ceramics and several other engineering plastics in high-end applications. LCPs finds use in electronic components like printed circuit boards and surface mounted devices to name a few. Electrical & Electronics and Consumer Electronics are so far the largest consumers of LCP market and will continue being the major consumers in the long term forecast. Other applications for LCPs include: Automotives (power trains of hybrid cars), Industrial, Medical and other applications like Aerospace and Bakeware.

LCPs were first commercialized in 1980 s. Currently, the major players into manufacturing of neat LCP resins are: Polyplastics, Ticona, Toray, Solvay, Sumitomo and Ueno. Polyplastics is identified to be the largest producer with a manufacturing facility in Fuji, Japan. LCP  resins manufacturing facilities are largely restricted to Japan, China and USA. The global demand is expected to grow at a CAGR of 5.0 - 5.2% in the next 5-6 years.

In 2016, Asia-Pacific was estimated to be the largest consumer of LCPs accounting for over 75% of the global demand. China accounted for the major demand with strong demand from its electrical & electronics industry. Other Asian countries including Taiwan, Japan, India, Singapore and South Korea account for a decent share of the global demand.

Miniaturization of electronic parts owing to the need of ultra-thin components and lead-free soldering techniques are the major growth driving factor for LCPs in the electronics industry. Growing population, increasing disposable income, and per capita consumption of plastics are some of the key factors supporting the growth in demand of plastics in the electronics industry. Its high prices compared to other commodity plastics put it to some disadvantage. However, its outstanding properties outweigh this and the market for LCP is likely to expand over the years.

Topics Covered

The report covers the following topics:

LCP Market data in term of volume and value for each end-use at regional and country level

LCP Market analysis for production capacity, demand, at regional and country level

Business opportunity assessment

Macro-economic factors like GDP, population and world economic integration

Strategic issues and recommendations

Supplier profiles

Market analysis and forecasts from 2005 till 2025

End-Uses

Automotive

Electrical & Electronics

Industrial

Consumer appliances

Medical

Others (Aerospace, Bakeware, etc)

Regional Markets

Asia Pacific

Eastern Europe

Central & South America

Middle East & Africa

North America

Western Europe

Request For Sample:- https://prismaneconsulting.com/report_details/1/Global-Liquid-Crystal-Polymers-(LCP)-Market-Study,-2005-2025

[gosagar1993-blog]

LIQUID CRYSTAL POLYMERS Market 2005 | Business Analysis, Scope, Size, Overview, and Forecast 2025

Liquid Crystal Polymers (LCP) are aromatic polyesters by composition that exist in liquid crystal state. They exhibit a partially crystalline structure and their molecules are largely aligned. They have remarkable physical properties and chemical inertness by the virtue of which are capable of replacing metals, ceramics and several other engineering plastics in high-end applications. LCPs finds use in electronic components like printed circuit boards and surface mounted devices to name a few. Electrical & Electronics and Consumer Electronics are so far the largest consumers of LCP and will continue being the major consumers in the long term forecast. Other applications for LCPs include: Automotives (power trains of hybrid cars), Industrial, Medical and other applications like Aerospace and Bakeware.

LCPs were first commercialized in 1980 s. Currently, the major players into manufacturing of neat LCP resins are: Polyplastics, Ticona, Toray, Solvay, Sumitomo and Ueno. Polyplastics is identified to be the largest producer with a manufacturing facility in Fuji, Japan. LCP resins manufacturing facilities are largely restricted to Japan, China and USA. The global demand is expected to grow at a CAGR of 5.0 - 5.2% in the next 5-6 years.

In 2016, Asia-Pacific was estimated to be the largest consumer of LCPs accounting for over 75% of the global demand. China accounted for the major demand with strong demand from its electrical & electronics industry. Other Asian countries including Taiwan, Japan, India, Singapore and South Korea account for a decent share of the global demand.

Miniaturization of electronic parts owing to the need of ultra-thin components and lead-free soldering techniques are the major growth driving factor for LCPs in the electronics industry. Growing population, increasing disposable income, and per capita consumption of plastics are some of the key factors supporting the growth in demand of plastics in the electronics industry. Its high prices compared to other commodity plastics put it to some disadvantage. However, its outstanding properties outweigh this and the market for LCP is likely to expand over the years.

Topics Covered

The report covers the following topics:

LCP Market data in term of volume and value for each end-use at regional and country level

LCP Market analysis for production capacity, demand, at regional and country level

Business opportunity assessment

Macro-economic factors like GDP, population and world economic integration

Strategic issues and recommendations

Supplier profiles

Market analysis and forecasts from 2005 till 2025

End-Uses

Automotive

Electrical & Electronics

Industrial

Consumer appliances

Medical

Others (Aerospace, Bakeware, etc)

Regional Markets

Asia Pacific

Eastern Europe

Central & South America

Middle East & Africa

North America

Western Europe

Request For Sample:-https://prismaneconsulting.com/report_request_sample?_token=SETIxfRN0H0xXQNVZiiX21wdyGZRxOKlBaiBZ5Ie&report_id=1

[gosagar1993-blog]

Market research company – PrismaneConsulting offers a market research report .We cover reports related to current chemical and energy market trends,market growth