georges-dalgados

[georges-dalgados]

Optimum Self Install

Do you currently have an Optimum subscription? Do you think the cost of expert installation is a little bit excessive? the same for me. Nevertheless, if you have some patience, you can self-install Optimum internet as I did and save between $100 and $150. Regardless of your level of networking experience, you can finish the self-installation in about an hour.

The procedures for installing and activating the Optimum modem are highlighted in the article. Moreover, by saving money on monthly equipment rental if you purchase your own Optimum-compatible modem, you may reduce the cost even more.

The Optimal Self-installation Kit is available.

You must order the self-setup kit if you select the self-install option. You may either drive to their retail location to place an order there or purchase it online, provide your membership information, and pick up your order there.

What Included with a Kit for Self-Installation?

The package includes:

If you don't want to have to pay for rentals, you must return the cable modem.

Ethernet cable, coaxial cable, and power cables

Cable splitter for a Wi-Fi router (for Internet + TV packages)

Optimum TV Receiver & Remote (For packages combining Internet + TV)

Instructional guide

How Can I Install Myself For Best Connection?

The whole process of completing the Optimal Installation will be covered in this section.

Attach the Cables

Step 1: The coaxial outlet on the walls must be found if your home already has a coaxial cable configuration. If you live in a big house, there are many of outlets there. Choose the one that is centrally located, and make sure that neighbouring power I/O is accessible.

Step 2: Insert the coaxial wire from your kit's one end into a wall socket. Check for any loose connections and tighten the screws, if necessary.

Step 3: As indicated in the illustration below, insert the opposite end of the coaxial cable into the modem.

Step 4: Use a coax splitter as illustrated in the illustration below if your Internet and TV service are combined:

Step 5: Attach the coaxial wire to the single input end of the wall outlet. The modem will be connected to one of the two output slots, and your TV set-top box to the other.

Your set up will like this if you simply use the internet connection:

Switch on the Optimum Modem.

The activation of a modem is a rather easy operation. After connecting all of the power cords and equipment, turn them all on. You can move on with the Optimum activation if the US/DS and Internet lights are on and the connection appears to be solid.

Step 1: Connect your laptop or PC to the Kit via an Ethernet wire.

Step 2: On the laptop, launch the browser, and input https://install.optimum.com/JointInstall to bring up the following page:

3. Provide your last name and registered phone number of the process. Your purchase confirmation, subscription voucher, or self-installation package all contain the Account number. Enter the information, then select next.

The wizard for guided installation will walk you through it. The duration of the procedure might be between ten and fifteen minutes.

Step 1: to insert the smart card into the cable box's front.

Step 2: Use an HDMI cable to connect the TV and the cable box by inserting one end into each device.

The rear of your cable receiver will like this:

Make sure the splitter's coaxial line is connected in. The TV and receiver are connected using an HDMI connection. The electrical cord is attached.

Step 3: After doing this, turn on your TV and choose the appropriate input source. Make a call to technical support and speak with an agent. Hold down the cable box's power button while the TV screen displays Software Downloading.

The gadgets will switch on and off automatically throughout this procedure, which might take up to 10 minutes. You may finish the setup and start using your TV after you see the screen below.

4. Install a Wireless Router 3.

We may now setup the router after turning on the modem.

Step 1: Make sure the device is turned on and that an Ethernet wire is connected to the router's WAN port from the modem.

Step 2: If you are using the Optimal router, log in here using your Optimum ID and Password to access and configure the router.

Also, you might not have the ID if you intend to use your own router for Optimum. Hence, before setting up your WiFi SSID and password, you must create the account.

4. Connect the devices and check the connectivity.

First, open your mobile device, locate your wifi id, then enter the password to connect.

Step 2: Once the mobile device is linked, you may check your connection by doing an optimal speed test here.

Benefits and Drawbacks of Optimal Self Installation