furbypuppy

[furbypuppy]

Finally gave Slimeball his horns!

[furbypuppy]

She waits for you

[furbypuppy]

how to replace a 1998 furby’s eyelashes

there’s an awful lot of furby tutorials on the internet but i haven’t seen any yet for eyelashes specifically and it’s something that took me a few tries to get right, so hopefully this helps someone out!  also i apologize for the photo quality, i had to retake several after i was already done but they should still be easy enough to follow

materials: screwdriver, false eyelashes, scotch tape, scissors, tweezers, quick-dry glue

step 1: skin your furby and remove its shell.  plenty of people online have already taught you how to do this much better than i ever could

step 2: remove the topmost screw on the back of your furby, and the one on its faceplate.  on this one it was on the left, but its location varies.  if it’s below the beak you may need to unscrew the speaker in order to get to it

step 3: using a small screwdriver or a toothpick, gently push out the rod holding the eyes and eyelids in place

step 4: gently pull the faceplate forward until you’re able to remove the eyes and eyelids.  be careful not to pull out any part of the light sensor

step 5: i wasn’t able to get pictures for this one because they were already long gone, but if you need to remove the old eyelashes just gently pull up from one end of the glued area.  by now the glue is so old and dry that it should come up easily

step 6: pull out your false eyelashes.  i’m using these rainbow tinsel ones i got from party city

step 7: stick a piece of scotch tape on the back of the eyelashes, about half a centimeter below the glue strip (is that what it’s called?  the little strip of fabric you use to glue them on.  idk)

step 8: cut off the excess tape and the glue strip.  the issue with the strip is that it’s too raised, so if you leave it on your furby won’t be able to move their eyelids properly

step 9: cut the eyelashes in half and use a pair of tweezers to remove any loose ends

step 10: apply a thin coat of quick-dry glue to the front of the eyelashes and stick them in place.  i use latex-based craft glue, but super glue will also work

step 10: repeat steps 7-10 with the second eyelash and layer it over top of the first one.  leave the glue to dry for at least an hour

step 11: reassemble your furby and enjoy their fancy new peepers

[furbypuppy]

Well i have a new favorite hobby

[furbypuppy]

he loves public transport

[furbypuppy]

naughty boy in jail

[furbypuppy]

View this post on Instagram

A post shared by Christian Hernandez 🇲🇽 (@cohv_ink) on Sep 4, 2019 at 9:58pm PDT

RAINBOW FURBY TATTOO OH MY GOoooooSH

[furbypuppy]

Meet Slushie! He loves arcades, fizzy sweets and his best friend Party Boi Jr! What a radical dude!

[furbypuppy]

For all the furby community, here is some old furby adoption certificates in HD !

Good luck with your furbs :D

Kiss & Love <3

[furbypuppy]

Im making a tiny book for my furby.... Yes I intend to fill out the whole thing no I don't care how long it takes yes I plan to make him several more books

[furbypuppy]

💜🧡💙💛

[furbypuppy]

GUISE

GUISE

IF YOU HIT “X+C” IT SHUTS OFF EVERY GIF ON YOUR DASH

EVERY SINGLE ONE TURNS TO A LITTLE GREY BOX WITH A LOCK

GUISE

TUMBLR HAS MADE ITSELF SAFE FOR EPILEPTICS

PASS IT ON

[furbypuppy]

girby girby girby

[furbypuppy]

We had fun but we're on the ground now.

[furbypuppy]

Gigamax meowth is just a long furby with limbs.

[furbypuppy]

Ambrosia says : y’know , like

✨ nya ✨

[furbypuppy]

I'm so fuckin tired, but here's Owen.