fadawoxia-blog

[fadawoxia-blog]

2E1 to 2 Ethernet Interface Converter

Welcome to a Biomedical Battery specialist of the Fukuda Battery

2 E1 to 2 Ethernet Interface Converter is also called 2 E1 to 2 Ethernet protocol converter with battery like Fukuda FX-2201 Battery, Fukuda FX-3010 Battery, Fukuda FCP-4610 Battery, Fukuda FCP-2155 Battery, Fukuda 8/HRY-4/3AFD Battery, Fukuda FCP-7102 Battery, Fukuda FX-7100 Battery, Fukuda 8PH-4/3A3700-H-J18 Battery, Fukuda FX-4610 Battery, Fukuda FCP-4010 Battery, Medtronic M240 Battery, Primedic DM30 Battery. The E1 to 4 10/100Base-T serial interface converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between E1 channel and Ethernet interface. It can transmit signal of E1 channel to RJ48 interface point to point, realize the connection of E1 channel and Ethernet. It is different from normal bridge, supporting E1 channel customized configuration, auto detecting the number of E1 channels and use the available E1, allow some limiting transfer delay between different E1 channels. Single line speed is 1968Kbits/s, 4 channels can up to 7872Kbits/s. It can connect with Ethernet switch or hub when in 10/100Mbps full/half duplex mode, make use of mass E1 resource in telecommunication networks to expend the transfer distance and application field of Ethernet, is a suitable solution for broadband switch in of Ethernet. It can used in fields such as connecting LANs, connecting end offices, VOD, remote monitor, E1 interface of switches, etc.

2 E1 to 2 Ethernet Interface Converter Features: ♦ Realize transparent transfer ethernet data in x to xE1 channels. ♦ 10/100M Ethernet, full/half duplex self adapt, support VLAN. ♦ Ethernet support AUTO-MDIX( cross over and straight through self adapt) setting CRC alarm limitation to auto isolate lines with low transfer quality, single direction. When one direction error rate over limitation, disconnect only one direction, the other is not affected. Unbalance in two directions. ♦ Allow xE1 channels up to 10ms transfer delay. When the delay over the limitation, can stop transfer automatically. ♦ Having 2 loop back functions: E1 local loop, E1 external loop. ♦ Support dynamic ethernet MAC address (4096), having local address filter function. ♦ E1 interface compatible with ITU-T G.703, and G.823. Signaling slot not supported. ♦ E1 interface having internal clock resume circuit and HDB3 codec circuit. ♦ Support E1 channel hot plug, and auto-detect available E1 channels not pause thetransmission. ♦ Supporting x to xE1 channels customized configuration, auto detect the number of E1 channels and select the available E1 at reset. ♦ Support reset remote system from local system. ♦ Having Ethernet monitor auto reset function.

[fadawoxia-blog]

A SMART Future-Proof Optical Return Loss Meter

Welcome to a Biomedical Battery specialist of the Acterna Battery

The ORL-55 with battery such as JDSU GPDR204 Battery, JDSU LI204SX-60A Battery, JDSU LI204SX-66A Battery, JDSU LI204SX-60 Battery, Agilent M4 Battery, Agilent N9330 Battery, Agilent N9330B Battery, Agilent N9927A Battery, Agilent E6000B Battery, Agilent E6000C Battery, GE Datex-Ohmeda S/5 Battery, GE S/5 Battery is a high performance instrument for field, production and lab use. This instrument can be used in three different modes as a return loss meter, optical power/loss meter and a laser source.

Highlights •Ensures quick and reliable testing of the return loss of an optical system. High return loss values are essential for ensuring the signal quality especially with CATV & FTTx networks. •Measures return loss at up to three wavelengths simultaneously in real time using digital signal processing. •Return loss referencing performed via a single key stroke. Very easy referencing due to ultra stable lasers and special signal processing. •Can be used as a standalone optical return loss meter, an optical power/loss meter and a laser source. •USB interface for easy remote control & report generation •Internal memory for over 1000 results •New Visual Fault Locator Option •New Host USB data storage option

Applications •Designed for fiber optic field use for technicians and Installers/maintenance people within fiber optic networks especially for FTTX, CATV and high bandwidths installations.

Key Features •Auto-lambda function provides automatic wavelength detection to speed up testing. •70% reduction in testing time due to multiple automatic functions. •Industries first auto-zeroing function for very high accuracy with no manual zeroing needed. •SMARTEnergy power supply management system. •SMARTStar graphical user interface for fast and easy operation. •Quick start function requiring no warm up reduces testing time. •Robust shock proof instrument with great look and feel.

[fadawoxia-blog]

Anritsu MP1800A Signal Quality Analyzer

Welcome to a Biomedical Battery specialist of the Anritsu Battery

The Anritsu MP1800A and MT1810A, Signal Quality Analyzer (SQA) series with battery like Anritsu MS2028B Battery, Anritsu MS2721A Battery, Anritsu MS2726C Battery, Anritsu MS2711E Battery, Anritsu MS2712E Battery, Anritsu MT8212E Battery, Anritsu MS2036A Battery, Anritsu S332E Battery, Anritsu S362E Battery, Anritsu S412E Battery, Anritsu S113B Battery, Anritsu S311D Battery, are versatile Bit Error Rate Test Systems (BERTS) for multi-channel BER measurement up to 12.5 Gbit/s and provide various signal analysis capabilities. Additionally, it can be used to perform BER tests up to 50 Gbit/s by combining two MP1800A units with a MUX/DEMUX and synthesizer. A full line of five plug-in modules and various other options support configuration of a flexible test system matching the application. With slots for six modules, Windows®* XP GUI, keypad and rotary encoder, the MP1800A is designed for the R&D market; the less expensive MT1810A has four slots and can be controlled via Ethernet from an external PC running dedicated control software. It is idea for manufacturing and inspection.

Using the MP1800A series with installed MU181000B, MU181000A/B-001, and MX180005A makes it easy to configure an automated system for measuring Jitter Tolerance of multi-channel CPU boards, PC boards, and optical devices forming interconnects in routers, servers, super computers, etc. Up to four channels can be measured in one-quarter the time of previous setups, greatly improving the efficiency Jitter Tolerance tests --- which have been a measurement bottleneck in speeding-up interconnect compatibility tests.

The MP1800A Signal Quality Analyzer series support automatic multi-channel measurement of Jitter Tolerance of CPU boards, PC boards, optical devices, etc., forming interconnects in routers, servers, super computers, etc., and eliminating bottlenecks in speeding-up interconnect compatibility tests.

*Windows is a registered trademark of Microsoft Corporation in the USA and other countries.

Features & Benefits: •Any wavelength from 850/ 1310/ 1550 nm is supported. •Multi Channel •Two optical interfaces: SFP and XFP •Differential Electrical Interface •43.5 Gbit/s BERTS can be configured when used in combination with the Anritsu 43.5 Gbit/s MUX/DEMUX.

[fadawoxia-blog]

JDSU Acterna FST-2310 Test Pad

Welcome to a Biomedical Battery specialist of the Acterna Battery

The FST-2310 TestPad with battery such as Agilent E6000A E6000B E6000C Adapter, Li202S Li202SX ME202C M4605A SM204 MTS-6000 LI204SX JD1600LP Battery Charger Adapter, Agilent E6000A E6000B E6000C Adapter, Li202S-60A Battery, Li202S-66C Battery, Li202S Battery, Li202S-6600 Battery, Li202SX Battery, Li202SX-7800 Battery, JDSU LI204SX Battery, JDSU MTS-6000 Battery, GE SM201-6 Battery has put the power to provision, troubleshoot, and maintain DS0 to OC-48 services in your hands, minimizing lost revenue on your network.

Highlights: * Comprehensive testing with multirates, multiservices, and multimodes. * Easy-to-use, touch-screen graphical user interface (GUI) simplifies and expedites testing. * Engineered for the field with rugged construction, lightweight design, and battery-powered operation. * Modular TestPad 2000 architecture enables up-to-date support for established and emerging technologies in a single platform. * Automated testing features minimize training costs and testing complexity. * Remote control functionality using the module's GUI.

Applications: * Perform end-to-end BER testing using a wide range of stress test patterns. * Analyze network performance by simulating abnormal conditions and inserting various errors and alarms. * Perform in-service monitoring of the circuit under test to ensure Quality of Service (QoS). * Verify proper provisioning of network multiplexers and demultiplexers. * Verify proper network timing by measuring jitter at DS1 and DS3 tributary interfaces. * Qualify protocol services such as ATM, GR-303, and ISDN and decode protocol messages. * Perform bulk payload testing on SDH circuits at STM-1c/-4c/-16c rates.

[fadawoxia-blog]

Welch Allyn Holter Monitor

Welcome to a Biomedical Battery specialist of the Welch Allyn Battery

Welch Allyn has offered Holter Monitoring products for decades with batteries like Welch Allyn PIC30 Battery, Welch Allyn PIC40 Battery, Welch Allyn PIC50 Battery, Welch Allyn AED 10 Battery, Welch Allyn 00185-2 Battery, Fukuda BTE-002 Battery, Biocare ECG-3010 Battery, Biocare HYLB-947 Battery, Yokogawa AQ1200 Battery, Yokogawa AQ1200E Battery, Yokogawa AQ1205A Battery, Rohde Schwarz FSH20 Battery. Welch Allyn is known to provide reliable Holter Monitoring devices at affordable prices.

The Holter Monitors from Welch Allyn include:

Welch Allyn HR 100

The Welch Allyn HR 100 is an affordable 2-3 Channel Holter Monitor

Welch Allyn HR 300

The Welch Allyn HR 300 is a reliable 3 channel Holter Monitor device.

Welch Allyn Holter Analysis Software

Welch Allyn provides a low cost Holter Monitoring Analysis software platform that integrates with their line of Holter Monitor recording devices. The features of the Welch Allyn Holter Analysis software include:

Integrates with all Welch Allyn HR-100 and HR-300 Holter Monitor recorders

Review study results from multiple review modes:

Arrhythmia review mode

Heart Rate review mode

Beat by beat mode

Full Disclosure review mode

Relabel beats individually or globally

Manually categorize and re-categorize each ECG strip

Manually categorize and re-categorize artifact

Control analysis speed of full-disclosure review

Adjustable resolution in Full disclosure mode

Auto-paging function

Floating report interpretation window

Eliminate entire channel

Adjustable administrative permission

[fadawoxia-blog]

Philips SureSigns VS4 Patient Monitors

Welcome to a Biomedical Battery specialist of the Mindray Battery

Philips SureSigns VS4 with battery such as Philips RESPIRATEUR V60 Battery, Philips RESPIRATEUR V60S Battery, Philips Dameca Siesta i Breasy Battery, 20*H-AA2000B Battery, Philips Suresign V24E Battery, Philips HeartStart FR2 Battery, Philips M3863A Battery, Philips M3861A Battery, Philips M3860A Battery, Philips M3840A Battery, Philips HeartStart FR2 Plus Battery, Philips M3841A Battery provides automated delivery of vital signs data from bedside monitors to the hospital's electronic health record (EHR), helping clinicians chart vitals into a patient's record at the point-of-care.

Easily enter up to 20 patient observations and assessments at the point of care with the QuickCapture tool.

Quickly validate patient information at the point of care with QuickCheck. It allows care giver and patient record authentication at the bedside. The patient record can be reviewed before export to EHR.

Serve large wards by saving up to 800 patient records on one monitor.

Large color-coded numerics clearly show key vital signs. They are visible in dark and well lit rooms. Confirmation of export records is easily seen in green.

Get more flexibility to respond to changing patient conditions by choosing between NBP interval mode and spot check mode in one device. Non-invasive blood pressure includes manual, auto interval, custom interval programs, and STAT modes.

The 2D bar-code scanner can be programmed with multiple ID fields to allow fast entry of patient ID.

Wireless capability and the proactive monitoring tool QuickAlert supports your hospital’s Rapid Response team.

The oversized, one-touch non-invasive blood pressure (NBP) on/off button makes it easy to take NBP readings.

Philips is committed to providing excellent clinical measurements, including a choice of Philips FAST-based SpO₂ algorithm or Masimo® SET® or rainbow® SpO₂ (including certain rainbow parameters). Either choice is compatible with a wide variety of Philips sensors.

An icon is lit when the battery is plugged in/charging so that caregivers can easily see when the device is available for use.

Save time by choosing between NBP interval mode and spot check mode in the same device.

This monitor features additional communication enhancements for your IT and network informatics teams and caregivers. Easily upgrade software and export data with the USB port. Communicate directly with your Electronic Health Record (EHR) system in HL7 format using the LAN/serial data connection.

[fadawoxia-blog]

Mindray BeneHeart R3 EKG-Gerat

Welcome to a Biomedical Battery specialist of the Mindray Battery

The Mindray BeneHeart R3 electrocardiograph utilizes the University of Glasgow ECG analysis algorithm with battery like Mindray LI12I001A Battery, Mindray LI13I001A Battery, Mindray LI23I001A Battery, Mindray LI23S001A Battery, Mindray LI23S002A Battery, Mindray LI24I001A Battery, Mindray LI24I002A Battery, Mindray LI34I001A Battery, Mindray BeneHeart Z5 Battery, Mindray BeneHeart D3 Battery, Mindray BeneHeart D5 Battery, Mindray BeneHeart D6 Battery, one of the world-leading resting ECG interpretations with 40 years of history. The Glasgow algorithm is the first to be based on specific variables, including age, gender, race, medication, and class in order to maximize the accuracy of the ECG interpretation. On the report, a headline may highlight one of several “critical value warnings” to alert medical attendants of findings that need immediate attention, such as, for example, a myocardial infarct.

The device is very easy to carry as it weighs only 1200 g, battery included. reliable analysis warning messages for critical values accurate real-time waveforms Lead V4R instead of V3 for more precise diagnostic accuracy when used for neonates and children ECG recording is automatically unfolded on the writing pad on top of the machine for notes or signature Operation with either rolling or Z-fold paper, switching from one to the other is very easy and convenient.

Technical Details LCD 5"/24 bit colour display with LED graphics backlit (Resolution: 800 x 480) Weight: 1.2 kg (incl. battery & internal AC power supply) Dimensions: 5.6 x 26 x 19.4 cm (HxWxD) Startup time: ≤ 5 sec. Frequency response: -3dB at 0.05 to 150 Hz ECG analysis sampling rate: 500 samples/sec. Digital sampling rate: 1000 samples/sec./channel Heart rate meter: 30 to 300 BPM ±10 % or ±5 BPM (whichever is greater) Power Supply: AC input (without external power adaptor or battery operation

Battery: Type: rechargeable Lithium ion battery Battery capacity: 11.1 V (typical), 2500 mAh, 6 hours of continuous operation (without recording) or 500 ECGs (in 2,5 x 4 format at 25 mm/s and 10 mm/mV) Battery charge time: 3.5 hours with power off

Software: Resting ECG mode: Records/prints 12-lead resting ECG with 10 sec. duration (standard) Internal storage: 800 ECGs Multi-language support: 13 languages

[fadawoxia-blog]

EXFO MaxTester FOT-923 SM Fiber Loss Tester

Welcome to a Biomedical Battery specialist of the EXFO Battery

The FOT-920 MaxTester Automated Loss Test Set with battery such as EXFO XW-E413 Battery, EXFO MAX-710B Battery, EXFO FTB-100 Battery, EXFO FTB-400 Battery, EXFO FTB-150 Battery, EXFO FTB-200 Battery, EXFO XW-EX002 Battery, EXFO XW-EX006 Battery, EXFO L08D185A Battery, EXFO FTB-1 Battery, EXFO MAX-730M Battery, EXFO MAX-720B Battery is the unit of choice for field technicians in network installation and maintenance. This unit integrates a fully automated bidirectional loss test set (OLTS), a light source and the Ultra-High-Power™ power meter with useful options, including a full-duplex digital talk set,visual fault locator and optical return loss test set, to create versatile combinations.

The FOT-920 gives you the edge when it comes to high-fiber-count installation. First, when doing a large volume of testing, the return on your investment takes less than a year. Second, the FOT-920 reduces the time you spend testing, training and in the field, making it ideal for outside plant applications.

Due to their high modulation rates, lasers used to transmit at OC-48 and OC-192 speeds are highly sensitive to ackreflection. When installing networks designated to transmit at these speeds, measuring backreflection is a must to ensure proper stability of the lasers and their central wavelength.

EXFO understands that your time is valuable; that’s why the FOT-920 features the patented FasTesT system. FasTesT automatically measures single-fiber loss in both directions, at two wavelengths, in less than 30 seconds. To speed up the reporting process, the FOT-920 stores all test results in its non-volatile memory; later, you can file test data according to your own cable identification scheme. Create more extensive reports, including user and test location information, with ToolBox 6 software (included). Download, print or store results on a computer hard drive.

With increasing fiber deployment in Telco and CATV networks, busy fiber installation companies sometimes hire subcontractors to perform installation jobs. But subcontractors need to provide test documentation to show that a job meets specifications.

Now, subcontractors who use the FOT-920 can produce quality documentation efficiently. Thanks to the data logging and management features of the FOT-920, users can archive results and download information through the RS-232 port to a PC for professional analysis and report generation.

Features: FasTesT—automated bidirectional loss testing Optical return loss testing Simultaneous talking, testing and locating Ultra-High-Power™ power meter

Key Benefits: Automated dual-wavelength bidirectional loss testing on one connector in less than 30 seconds Storage of up to 512 fiber records Message-exchange capability Backreflection capacity ideal for OC-48 and OC-192 systems Power meter with up to 35 dBm capability Three-way powering: NiMH and 9V batteries; AC adapter/charger

[fadawoxia-blog]

Epiq 7 DS Advance Ultrasound System

Welcome to a Biomedical Battery specialist of the Philips Battery

No other premium ultrasound system can run the complete suite of the world’s most innovative ultrasound transducers. With the touch of a button, xMATRIX offers all modes in a single transducer: 2D, 3D/4D, Live xPlane, Live MPR, MPR, Doppler, color Doppler, and CPA, with battery such as Philips M4605A Battery, Philips IntelliVue MP70 Battery, Philips IntelliVue M8100 Battery, Philips IntelliVue M8001A Battery, Philips IntelliVue M8002A Battery, Philips IntelliVue MP90 Battery, Philips IntelliVue MP20 Battery, Philips IntelliVue MP80 Battery, Philips IntelliVue MP60 Battery, Philips IntelliVue MP50 Battery, Philips VM1 Battery, Philips VSI Battery.

EPIQ 7’s suite of sophisticated transducers meets the needs of your most challenging gynecological surveys and first through third trimester exams. PureWave – the power to image technically difficult patients

Philips exclusive PureWave crystal technology is clinically proven to improve penetration in difficult-to-image patients. The pure, uniform PureWave crystals are up to 85% more efficient than conventional materials, resulting in exceptional performance. This technology allows for improved penetration and excellent detailed resolution.

Transcranial image fusion combines multi-modality images with live ultrasound, supporting more confident answers in applications such as stroke therapy, while potentially reducing dependence on repeat CT or MR scans in routine follow-up cases.

Philips proprietary nSIGHT Imaging architecture introduces a totally different approach to forming ultrasound images without compromise. Unlike conventional systems that form the image line by line, nSIGHT creates images with optimal resolution down to the pixel level. nSIGHT Imaging incorporates the use of a precision beamformer along with powerful massive parallel processing. This extraordinary architecture captures an enormous amount of acoustic data and then reconstructs in real time optimally focused beams, creating precise resolution for every pixel in the image.

Obtaining flow information in small low-flow vascular structures has traditionally been a challenge. With EPIQ’s new MicroCPA feature, visualization of low velocity micro circulation is quick and simple, giving you more diagnostic confidence when evaluating organ perfusion or small vascular beds.

Real Time iSCAN (AutoSCAN) automatically optimizes gain and TGC to continuously provide a high-quality image.

EPIQ 7 has completely reinvented the premium ultrasound user experience. Ease of use, workflow, ergonomics, and mobility. We’ve revolutionized how you interact with an ultrasound system from every standpoint, and kept it beautifully intuitive and very quiet.

Navigate quickly to system functions with the tablet-like touch interface, with 40% less reach and 15% fewer steps to complete an exam.

EPIQ's extended-range control panel and monitor can be articulated for proper ergonomic alignment whether sitting or standing. The large 21" wide screen monitor facilitates easy viewing in virtually any environment. EPIQ 7 has four transducer connectors with ambient lighting for ease in transducer selection during an exam.

The EPIQ 7 is the lightest in its class; it's easily transported on both carpet and tile. Place it in sleep mode, move it and boot up in seconds. The monitor folds down to reduce overall system height for transport, and the integrated cable hooks and catch tray are ideal for mobile studies.

View DICOM images such as CT, NM, MRI, mammography, and ultrasound on your EPIQ system. Easily compare past and current studies without the use of an external reading station, and even review these Multimodality images while live imaging. Capture side-by-side comparison images as part of the exam documentation.

EPIQ 7 is almost silent when running A noise test determined that EPIQ 7 runs at 37-41 dB, which is equivalent to the sound of a library. This is extremely welcome in small scanning/examination rooms. EPIQ Evolution 2.0

This major upgrade unleashes the full power of our nSIGHT Imaging architecture by incorporating image quality advances across our complete suite of transducers and a wide range of applications.

Each Diamond Select system is factory refurbished and can be customer configured with the latest compatible software upgrades. To maintain the high standards set by Philips and meet your stringent performance requirements, all Diamond Select systems undergo a thorough refurbishment process.

[fadawoxia-blog]

Philips HeartStart MRx Defibrillator

Welcome to a Biomedical Battery specialist of the Philips Battery

For whatever you face in a day, the HeartStart MRx with battery such as Philips HeartStart FR2 Battery, Philips M3863A Battery, Philips M3861A Battery, Philips M3860A Battery, Philips M3840A Battery, Philips HeartStart FR2 Plus Battery, Philips M3841A Battery, GE B40 Battery, GE SM201-6 Battery, GE DASH 2000 Battery, GE DASH 2500 Battery, Acterna FTB-400 Battery is built to be tough and ready for action. The HeartStart MRx is designed to meet stringent test requirements including spraying water, military helicopter vibration, mechanical shock, one-meter drop, electro-magnetic compatibility, and extreme environmental conditions (temperature, humidity and altitude). In addition, the same MRx model that we ship to all EMS customers has passed an extensive battery of tests, performed by the US military, to achieve aeromedical air-worthiness certification. These military-level tests include: baseline performance and durability, electrical safety, vibration, electro-magnetic compatibility, climate, altitude, rapid decompression, explosive atmosphere, acceleration, and in-flight performance evaluations.

Defibrillation as easy as 1-2-3 1. Select energy to choose appropriate dosage 2. Charge button charges the defibrillator in 5 seconds 3. Press shock button to deliver therapy Large color display shows 4 waveforms and numerics, or view all 12 leads at once with the 12-lead acquisition option. Normal or high-contrast view for easy viewing in sunlight conditions. 10 hours of monitoring with two fully charged batteries. Ready-for-use indicator flashes to signal that ample power exists to monitor and deliver a shock. Automated self-tests that run hourly, daily and weekly. Easy-to-run operational checks. Color-coded monitoring ports for easy identification; ports match Philips patient monitors for easy hand-off. Integration and upgrades made easy-Ease of use is the hallmark of all Philips defibrillators and the HeartStart MRx is no exception. Training your medics to use the HeartStart MRx is straightforward due to its intuitive and easy-to-use design. Once the HeartStart MRx becomes part of your system, it can be easily upgraded in the field so that you receive the benefits of Philips advancements now and into the future without increasing the size of your device.

Superb, advanced monitoring capabilities The HeartStart MRx provides you with advanced monitoring capabilities to help better assess your critical care patients. Key monitoring parameters include:

ST/AR Basic™ arrhythmia detection for 10 rhythm disturbances and irregularities FAST- SpO2 (Fourier Artifact Suppression Technology) Microstream® Capnography (etCO2) Continuous temperature monitoring (core and skin) for post-resuscitation hypothermia protocols Invasive pressures (2 channels) Noninvasive blood pressure (NBP) Vital signs trending Audio recording

[fadawoxia-blog]

AQ1200 Compact Optical Time Domain Reflectometer

Welcome to a Biomedical Battery specialist of the Yokogawa Battery

An optical time domain reflectometer (OTDR) with battery like Yokogawa AQ1200 Battery, Yokogawa AQ1200E Battery, Yokogawa AQ1205A Battery, Yokogawa AQ1205F Battery, Philips NJ1020HP Battery, Philips M3046A Battery, Sumitomo BU-11 Battery, Sumitomo TYPE-81C Battery, Sumitomo TYPE-81M12 Battery, Sumitomo T-600C Battery, Zoll M Battery, Zoll PD1400 Battery is a precision instrument used to locate events or faults along a fiber link, typically within an optical communications network. The OTDR launches a series of high speed optical pulses into the fiber to be measured. Various events on the fiber generates a Rayleigh back scatter that returns to the OTDR and the strength of the return pulses are measured and integrated as a function of time, and plotted as a function of fiber length. The horizontal axis is the distance and the vertical axis is the loss.

OTDRs are mainly used in the optical fiber installation and maintenance servicing of access networks (communications links between telephone exchanges and telephone poles) and user networks (communications links between user sites and telephone poles).

Our broad lineup of OTDRs offer cost performance, field durability, and applicable dynamic range. With thirty years of innovation in reflectometry design we deliver technology solutions where you need them most.

The AQ1200 Multi Field Tester OTDR is a compact and lightweight handheld OTDR optimized for the installation and maintenance of optical fiber cables. Designed with ease of use in mind to simplify field testing, improve work efficiency and ensure qualify results. Seven models are offered, each with unique wavelength(s) based on their specific application.

These tri-wavelength models offers high dynamic range and has two ports. One port offers the communication wavelengths while the other port is dedicated for the maintenance wavelength. Thus this model is ideal for use in both installation and maintenance applications. The high dynamic range feature can accurately measure the trace even after the splitter in a PON system. Thus this is highly suited for high port count PON networks with up to 64 ports splitters.

In Passive Optical Network (PON) System used in FTTH (Fiber To The Home) it is important to quickly and correctly find a fault in the drop cable that is installed after the splitter. The AQ1200 MFTOTDR's PON measurement mode (*) is a mode optimized for the measurement of PON with a high-port-count optical splitter and can ensure a quality waveform even if there is a big loss of optical splitter in the line. With a short dead zone, the AQ1200 can distinguish connectors placed as closely as 0.75 m in FTTx, home or office networks.

[fadawoxia-blog]

6 Series MSO Mixed Signal Oscilloscope

Welcome to a Biomedical Battery specialist of the Philips Battery

Troubleshoot and validate high-speed designs now and into the future with upgradeable bandwidth that starts at 1 GHz and goes up to 8 GHz with battery such as Philips RESPIRATEUR V60 Battery, Philips RESPIRATEUR V60S Battery, Nellcor 8HR-4/3AU Battery, Philips Dameca Siesta i Breasy Battery, 20*H-AA2000B Battery, Philips Suresign V24E Battery, Welch Allyn PIC30 Battery, Welch Allyn PIC40 Battery, Welch Allyn PIC50 Battery, Fukuda BTE-002 Battery, Biocare ECG-3010 Battery, Biocare HYLB-947 Battery. Get accurate measurements with low noise and 25 GS/s sample rate per channel -- sample rate does not drop as you turn on channels.

Characterize jitter on GHz clocks and serial buses with ease. Effortlessly bring statistics into your everyday toolkit with integrated advanced measurements. For example, use the same drag and drop action for jitter or advanced power analysis as routine rise time and rms measurements. •Advanced Jitter Analysis •Advanced Power Analysis •Memory Analysis and Debug •High-speed Serial Compliance •Automated Measurements and Trend Analysis

Enter a world of versatility with four FlexChannel® inputs. Browse your circuits with included 1 GHz, 10x probes. Connect high performance single-ended active probes or differential probes, or do both at once with new TriMode probes. Expand your view by connecting a TLP058 probe to any input and get 8 digital channels - up to 32 digital channels. •1 MΩ and 50 Ω input terminations •Four 1 GHz low-loading passive probes, included •New TDP7700 Series 4, 6 and 8 GHz Trimode probes •New TAP4000 & TDP4000 4 GHz single-ended & differential probes NEW Options •DDR3 and LPDDR3 Measurements •100/1000BASE-T Ethernet Compliance •MIPI D-PHY 1.2 Compliance

Free upgrades on instruments with advanced analysis options •Bode Plot and Power Supply Rejection Ratio Measurements using built-in Arbitrary/Function Generator (option 6-AFG) added to Advanced Power Measurement and Analysis (option 6-PWR) •Eye diagram mask testing added to Advanced Jitter Analysis (option 6-DJA)

[fadawoxia-blog]

IntelliVue Cableless Respiration Pod

Welcome to a Biomedical Battery specialist of the Philips Battery

Part of the IntelliVue Cableless Measurement family with the battery like Philips M4605A Battery, Philips IntelliVue MP70 Battery, Philips IntelliVue M8100 Battery, Philips IntelliVue M8001A Battery, Philips IntelliVue M8002A Battery, Philips IntelliVue MP90 Battery, Philips IntelliVue MP20 Battery, Philips IntelliVue MP80 Battery, Philips IntelliVue MP60 Battery, Philips IntelliVue MP50 Battery, Philips VM1 Battery, Philips VSI Battery, the cableless respiration pod is a wireless, body-worn patch to derive respiration rate, patient posture, activity and optional pulse rate at defined time intervals, using 3D accelerometer technology.

The small, lightweight, body-worn respiratory device Enhance care and support patient mobility while continually measuring respiration rate. IntelliVue cableless respiration pod attaches easily with a patch, typically to the left costal arch of the patient's chest.

Confidence in patient monitoring with long battery runtime The integral Li-ion battery with long battery runtime delivers extended performance without frequent battery replacement. Measure respiration rate, patient posture, activity and optional pulse rate using 3-D accelerometer technology.

Cut the clutter while enhancing mobility IntelliVue Cableless respiration solution is small device, connecting via Short Range Radio (SRR) to communicate with IntelliVue MP5SC monitor and/or IntelliVue GuardianSoftware. Experience reduced cable clutter in the clinical environment, and enhanced mobility for once bedridden patients.

Respiration is a key indicator of changing condition Designed for comfort, our cableless respiration solution can help provide the early indications that the patient's condition may be moving towards deterioration. The cableless respiration pod automates collection of respiration rate data based on a defined time interval, which aids the caregiver in early detection and in making a decision on necessary interventions.

[fadawoxia-blog]

IntelliVue MP5 Portable Patient Monitor

Welcome to a Biomedical Battery specialist of the Philips Battery

Intuitive touchscreen simplifies use The user interface is designed to enhance visibility of patient data, making it easy to use, and compatible with standard software, helping you focus on the patient, not the monitor.

Wired and wireless networking provides data stream The monitor with battery such as GE DASH 2000 Battery, GE DASH 2500 Battery, Acterna FTB-400 Battery, Philips HeartStart FR2 Battery, Philips M3863A Battery, Philips M3861A Battery, Philips M3860A Battery, Philips M3840A Battery, Philips HeartStart FR2 Plus Battery, Philips M3841A Battery, GE B40 Battery, GE SM201-6 Battery connects to the IntelliVue Clinical Network, which can span the hospital enterprise. You can manage patient care with the confidence that data will be relayed with speed.

Dynamic Wave area auto-sizes waves Waves automatically adjust in size relative to the number of waves configured.

Horizon Trends provide context A horizontal split screen displays Horizon Trend measurements below real-time waves to make deviations apparent at a glance.

High-resolution display option enhances viewing Connect the monitor to a large display solution with optional IntelliVue XDS software. This high-resolution bedside display allows you to see vital patient information at a distance. An XDS remote-control lets you work comfortably.

Essential measurements to support informed decisions Philips is committed to providing excellent standard measurements such as 12-lead ECG (both conventional and derived using EASI(TM) or Hexad method),multi-lead arrhythmia and ST segment analysis, choice of capnography with mainstream, sidestream or Microstream CO₂ (including integrated Pulmonary Index), invasive pressure, temperature and a choice of pulse oximetry with Philips FAST SpO₂, Nellcor™ OxiMax™ SpO₂ or Masimo® rainbow® SET® SpO₂(including certain Masimo rainbow parameters).

IntelliVue Guardian Early Warning Score on a spot-check monitor Aids clinicians in early recognition of subtle signs of patient deterioration. The Early Warning Score is designed to facilitate fast intervention to enhance patient care.

Flexible MX40 connection with short range radio Connects to the IntelliVue MX40 via Short Range Radio for additional vital signs parameters and continuous monitoring with flexibility for supporting high acuity patients.

ST Map to recognize changes This feature collects ST values and trends derived from the vertical (limb leads) and horizontal (chest leads) planes into an integrated mind's eye view. It can help clinicians recognize ST changes and their location in the heart more easily.

ProtocolWatch to simplify evidence-based care Simplifies sepsis care by continually checking monitoring data against care protocol criteria to help provide information when it matters most. Whenever criteria for sepsis are met, ProtocolWatch prompts clinicians for the tests, observations, or interventions indicated by the protocol. ProtocolWatch also produces a log that can be printed for documentation and quality improvement.

[fadawoxia-blog]

EXFO Max Tester Max-635-V2XAA MaxTester

Welcome to a Biomedical Battery specialist of the EXFO Battery

EXFO’s MaxTester 635 with battery such as EXFO XW-E413 Battery, Anritsu MW9070B Battery, EXFO MAX-710B Battery, EXFO MAX-720B Battery, EXFO MAX-730M Battery, Yokogawa AQ1200 Battery, Yokogawa AQ1200E Battery, Mindray LI12I001A Battery, Mindray BeneHeart D3 Battery, Mindray LI24I001A Battery, Mindray BeneHeart D6 Battery, Mindray LI34I001A Battery is the perfect tool for any service provider deploying multiplay services over single-pair or bonded ADSL2+ and/or VDSL2. Its small form factor, rugged design and easy-to-use menus make it the ideal tool for installation and repair technicians. With the MaxTester 635, the testing process is highly automated and technicians close their jobs quickly and efficiently. The large display of the MaxTester 635 makes it even more user-friendly, and when it comes to saving results, it provides technicians with many connectivity options for uploading tests and compiling reports.

Equipped with SmartR™, the MaxTester 635 allows technicians to work smarter, not harder. SmartR is a suite of intelligent and automated tests that allow any technician to quickly and easily get an understanding of the condition of the line under test, as well as to identify and locate a variety of common circuit faults. The Pair Detective feature automatically runs the most common line tests and provides graphical, color-coded results and pass/fail indications to detect conditions, including shorts, grounds, opens, battery, splits and imbalances. FaultMapper utilizes time-domain reflectometry (TDR) and resistive fault location (RFL) technology to provide the additional capability of locating service-affecting line faults including bridged taps, shorts, grounds and opens. EXFO’s unique SmartR presents results in an easy-to-understand, graphical format, with plain language feedback, making copper troubleshooting easier than ever before.

Ensures that the customer has the required bandwidth (downstream and upstream rates) for delivering triple-play services over single-pair or bonded ADSL2+ and VDSL2 Validates that the IPTV and data services can operate on the circuit with the required QoS Verifi es that the customer’s modem/router, equipment and inside wiring are operating correctly Proves IPv4 and IPv6 data fl ow between the network and end equipment

Detection of potential bottlenecks on subscriber loops to ensure high-quality, consistent and error-free multiplay services 30 MHz spectrum analysis for circuit qualifi cation in any VDSL2 band plan (8, 12, 17 and 30 MHz) Loop and fault analysis using proven TDR and RFL/K-test techniques for VDSL2 or ADSL2+ prequalifi cation Measurement and reporting of suspect voltages, opens, shorts, and balance issues from a single end, or utilizing an FED that can be remote controlled by the MaxTester to put the necessary opens and shorts at the end of the circuit under test Determine the maximum ADSL2+ data rates that a copper loop could support, prior to connecting/provisioning the circuit and equipment, with the MaxTester’s Data Rate Prediction (ADRP) pre-qualifi cation report

[fadawoxia-blog]

Sunrise Telecom N1776A CaLan Network Profiler

Welcome to a Biomedical Battery specialist of the Philips Battery

The Network Profiler with battery like Philips M2 Battery, Philips M3 Battery, Philips M4 Battery, Sumitomo BU-11 Battery, Sumitomo TYPE-81C Battery, Sumitomo TYPE-81M12 Battery, Sumitomo T-600C Battery, Philips M3046A Battery, GE B20 Battery, GE B30I Battery, GE B40 Battery, GE SM201-6 Battery provides a scalable solution, starting with a spectrum analyzer, adding QAM measurements, Digi-Sweep and all the versatility needed for today’s evolving technology and beyond. Using a familiar Windows CETM operating system, you can quickly access a detailed profile of the network’s performance or drill down to investigate a specific problem. The large 8.4” color VGA touch-screen display puts a powerful grouping of test solutions at your finger tips for preventive maintenance, troubleshooting, or proof of performance.

The Network Profiler takes advantage of the power of a true spectrum analyzer to meet today’s demanding test needs, while its open architecture and standards provide a platform capable of adding new features and functions as technology evolves. At the heart of this revolutionary platform is its Windows CETM operating system and large format color display with touch-screen. If you can use a PC with Windows, you can use the Network Profiler. It takes full advantage of all the standard Windows functions to present an intuitive graphical user interface that significantly reduces training time, but more importantly, allows the user easy access to the full functionality of this powerful appliance.

The Network Profiler resolves the challenges of interconnectivity by providing all of the communications ports necessary to make transfer of information in and out of the instrument as easy as connecting to a PC or the network. You can take advantage of the various Input/Output ports that include a RS232 port, two USB ports, a 10Base-T Ethernet port and a Type II PCMCIA slot to maximize the instrument’s connectivity and data storage capacity.

The Network Profiler is packed with all of the features you expect in a portable spectrum analyzer. The operator can choose from standard measurement setups or fully control how measurements are performed to help detect network issues before they become problems.

• Selectable resolution and video bandwidths allow full measurement control • 3 detector modes, positive (peak), negative and sample • Peak hold, adjustable averaging • Zero span measurements • Full tuning control • 500 points of display resolution • Variable vertical resolution • Automatic calibration (eliminates warm-up time) • Touch screen marker positioning

All of the instrument functions are accessed via control tabs at the bottom of the screen. Control settings can be selected by scrolling through the valid values or by entering the value using the large pop-up keyboard or keypad. To position the markers simply touch the desired position on the trace and the selected marker will move automatically to that position. Fine tuning is accomplished by using the handy arrow keys on the keyboard. This intuitive combination allows the user to quickly setup test limits.

[fadawoxia-blog]

Philips Respironics BiPAP V30 Auto

Welcome to a Biomedical Battery specialist of the Philips Battery

The Philips Respironics BiPAP V30 Auto with battery like Philips RESPIRATEUR V60S Battery, Philips RESPIRATEUR V60 Battery, Philips M2 Battery, Philips M3 Battery, Philips M4 Battery, Zoll M Battery, Zoll PD2000 Battery, Zoll PD1600 Battery, Zoll PD1700 Battery, Zoll PD4410 Battery, Sumitomo BU-11 Battery, Rohde Schwarz HA-Z204 Battery offers nine flexible therapy modes, auto-titration, and customizable alarms. The V30 Auto allows for cost-effective treatment of OSA patients in low-acuity wards across the hospital.

Auto-titration

Because 85%-90% of OSA cases are undiagnosed, many patients with OSA are hospitalized without having completed a sleep study.¹ Others may have been diagnosed, but surgery or health issues may have affected their pressure requirements. The V30 Auto uses proprietary technology to automatically titrate pressure to each patient’s needs.

Versatile and efficient

The V30 Auto’s compact, portable design makes it easy to transport and store, and configurable alarms allow you to adapt it to meet departmental needs. Its versatility facilitates high level care in low-acuity wards, so you can dedicate your high-acuity NIV systems to critical care areas. Accessories are compatible with other Philips NIV systems.

Easy transition to home care

Patients who learn of their OSA in the hospital may find it easy to transition to home CPAP or BiPAP therapy because of the familiarity they gain by using the V30 Auto in the hospital. Patient comfort elements include easily adjustable exhalation relief settings and ramp.

Auto-Trak improves synchrony

Our proprietary Auto-Trak algorithm improves patient-system synchrony by automatically adapting to changing breathing patterns and dynamic leaks so that you don’t need to adjust trigger and cycling sensitivity manually.