dustlessmachine

[dustlessmachine]

Ps Balls | Ps Ball for sale

From: dustless blasting machine

Ps Balls

PS Ball is an environment-friendly material proved by the Ministry of Environment. It's superior characteristics compared to sand or copper slag in its compressive strength, hardness, and anti weathering. It is being generally used in the field of ship repair industries and oil refinery plant maintenance for shot blasting purpose, PS Ball itself has shaped in a stable and safe form, not a pollutant and harder than copper slag or garnet sand.

Applications of Ps Balls

Less risky to the operators and neighbors, low levels of dangerous contaminants, such as asbestos (in olivine) and arsenic (in copper slag).

Exhaust less dust under normal usage conditions than Copper Slag and Garnet.

Easy use with high productivity without replacing blasting equipment.

Durability to allow collection, reclamation, and reuse.

Different Sizes of Ps Balls

Common Size

Under 0.6 mm

0.6~1.0mm (0.8~1.2mm)

1.0~2.0mm (1.2~2.5mm)

Mixed Size

0.6~2.0mm (0.8~2.5mm)

0.1~5.0mm (0.1~5.0mm)

Industrial Uses

Steel Bridges.

Heavy Steel Structure.

Storage Tanks.

Shipbuilding.

We provide steel shot, aluminum oxide, copper slag, steel grit, garnet sand, quartz shot, SS shot, glass beads, etc. We provide a large range of products and are checked on various parameters, such as density, physical and chemical properties, microstructure, hardness, durability. We are focused on our quality products and customer satisfaction.

[dustlessmachine]

Cut Wire Shots | Cut Wire Shots for Sale

From: dustless blasting machine

Cut Wire Shot

The cut wire is very aggressive and therefore quite effective in heavy-duty operations, but wear more on wheel blast machine parts. Conditioned steel cut wire is used in shot peening applications where a high carbon steel shot doesn’t provide a stable enough operation mix. Stainless steel cut wire is used for cleaning and peening purposes where ferrous contamination can’t be tolerated. It produces a very shiny surface, maintains its shape longer then cast abrasives and it produces a dust-free surface. Stainless steel cut wire is available as a cut or modified. Aluminum cut wire shot is used for the blast cleaning, surface finishing, and deburring of mainly aluminum castings and forgings. It is very durable and leaves no ferrous residue on the substrate.

Advantages of Cut Wire Shot

Consistency.

Resistance to fracture.

Cycle time.

Durability.

Lower surface contamination.

Applications of Cut Wire Shots

Prevents ferrous contamination when blasting or peening stainless steel, titanium, aluminum, or other non-ferrous work objects.

Cleaning aluminum or other non-ferrous castings that require a brighter finish while still removing parting lines or other blemishes.

Preparing aluminum for paint and on aluminum die castings for deflashing and finishing.

Primarily to clean or peen parts and components where conductivity is important and cannot be interfered with; for paint removal on electrical components and tooling.

Industrial Uses

Automotive Industry.

Aerospace Industry.

Medical Industry.

Shipping Industry.

We provide steel shot, SS shot, copper slag, steel grit, garnet sand, quartz shot, aluminum oxide, glass beads, etc. We provide a large range of products and are checked on various parameters, such as density, physical and chemical properties, microstructure, hardness, durability. We are focused on our quality products and customer satisfaction.

[dustlessmachine]

Copper Slag | Copper Slag Price in India

From: dustless blasting machine

Copper slag

Copper slag is a byproduct of copper extraction by the process of smelting. It is used an abrasive media because it gives faster blast cleaning speed and provides low dust level as compared to other abrasive media.

Copper slag is a by-product of copper extraction. During the smelting process for copper extraction, impurities become slag which is separated for further industrial use. Copper slag mostly contains iron oxides and silicon. The copper slag has a fine, binding agent that holds the larger particles and improves the properties of the concrete. It also works as a form of recycling product.

Copper slag is used as a blasting media for surface cleaning of metal and other mechanical devices which help to clean and shape the surface of the metal. In copper slag blasting, the quality of copper slag is used to enhance the quality. Granulated copper slag blasting is used in heavy machines to remove thick and tough dust and corrosion. Copper slag blasting is well known for its excellent finishing, smooth edge, and cleaning. Copper slag has bulk density and angular shape due to which it provides fast cutting action and increase production rates.  The hardness and high density of copper slug provide high resistance to fracture with very low dust formation during the Sandblasting operation. Copper slug blasting gives faster blast cleaning speed as compared to other abrasives.

This material also has some limitations that one should be aware of while using it for any application.

Application of Copper Slag

Copper slag is generally used for surface blasting operation. it is used as a blasting media for blasting purposes. In this process, a stream of abrasive is propelled at the workpiece.

Copper slag used as an abrasive media causes less harm to workers and the working environment as compared to other abrasive media or sand. It helps in maintaining the most rigid health and ecological standards also.

Copper slag can also be used for construction purposes too. It helps in replacing the use of other primary materials.

Features of Copper Slag

Recyclable

High cleaning speed

Low dust level

Low abrasive consumption

We provide copper slag for blasting which helps in increasing the productivity rate. They also reduce the slag consumption rate. Our equipment produces copper slag from metallurgical slags and also provides fast blast cleaning rates. We manufacturers concentrate on supplying the best services to meet customer’s needs at reasonable prices with unique technology.

[dustlessmachine]

Aluminum Oxide | Aluminum Oxide Blast Media | Aluminum Oxide Uses

From: dustless blasting machine

Aluminum Oxide

Aluminum oxide has excellent mechanical, chemical, and thermal qualities which makes it a perfect choice for using as an abrasive media for blasting operations in many industries.

Aluminum oxide is an inert, odorless, white amorphous material that is often used for industrial applications due to excellent properties. Aluminum oxide can be used as an abrasive blast media because of its properties of being highly efficient and highly reusable.  Aluminum oxide is harder than most of the other blast media. It helps in cleaning of reshaping the mechanical devices much quickly.

Aluminum oxide is widely used in Sand Blasting machine operations as an abrasive medium due to its cost, longevity, and hardness. It helps in cutting even the hardest materials and sintered carbides. Also, aluminum oxide is cost-effective and efficient media for other operations like; tumbling, surface finishing, cleaning. Aluminum oxide gives fast cutting action which helps in minimizing damage to materials by eliminating stresses on the surface caused by heavy media.

Features of Aluminum Oxide

Fast cutting action.

Highly durable.

Reusable.

Long-lasting and lighter.

Harder.

Aluminum Oxide Applications

Paint stripping.

Abrasion resistance.

Slurry polishing.

Wear resistance.

Grinding.

Paint filler.

Surface preparation before welding and metalizing.

Aluminum oxides are of an angular shape and have high hardness. It is an aggressive abrasive blasting media which is suitable for both ferrous and non-ferrous substrates.

Aluminum Oxide Manufacturer

Dustless blasting Machine a leading manufacturing company of abrasive materials like aluminum oxide, steel shots, and Sand Blasting machine, shot blasting machine, thermal spray gun, industrial dust collector based in Jodhpur, Rajasthan, India.

[dustlessmachine]

Steel Grit | Steel Grit for Sale

From: dustless blasting machine

Steel grits are used as an abrasive blast media. Blasting with steel abrasive is an important operation of metal production. Steel grit is most commonly used for industrial applications to meet different requirements. Steel grit produces an etching on a metal surface for better coatings.

Steel Grit Properties

Steel grit is angular in nature. Also, it is proven to be ideal in removing contaminants from mechanical devices. The most common use of steel grit is removing mill scale and different degrees of coatings from the surface. Here, the larger numbers of grit provide a smaller size of the actual particle of blast media. Those smaller particles create a smaller blast profile and larger particles create a deeper blast profile. Steel grit abrasives can be used multiple times before they need for replacing grit occurs. This property of grit steel allows it to be used for approximately 150 to 200 times.  

Applications of Steel Grits

Rail car reconditioning

Removal of flashing

Blasting bridges

Forging industry

Metal parts applications

Steel grit is characterized due to its angular shape which results in deeper cuts in blast applications. Steel grit also offers recyclability. The bulk density of steel grit is very high and appropriate equipment must be used to convey it.

Operations involving steel grit are able to tolerate a level of ferrous and non-ferrous residue on the workpiece. It leaves ferrous contamination when breaking down on the parts which are blasted. Steel grits are a commonly chosen material in wheel blast equipment and perfectly outfitted blast room due to their durability.

Manufacturers of Steel Grit

Dustless blasting machine manufacturers supply steel grits at very reasonable prices. Along with them, other blasting media are also supplied to many industries for various applications. We also manufacture and export the best quality of machines for sand blasting, shot blasting, thermal spray gun, industrial dust collector for a very long time. Here a team of skilled work according to the customer requirement to give the best services with technical support.

[dustlessmachine]

Steel Shots | Steel Shots for sale

From: dustless blasting machine

Steel Shots

Steel shots help in removing contamination from mechanical surfaces and provide an excellent surface that is free of defects. Steel shots are used to get a perfect surface profile so that the surface can be prepared for further operations. It also helps in many other surface treatment processes like; cleaning, descaling, and debugging.

Product Details:

Carbon C-0.80-1.20%

Phosphorous P-Max. 0.04%

Sulphur S-Max. 0.04%

Specific weight approximately-7.5 kg/㎤

Hardness-40-51 HRC

Steel Shots

Steel shots are solid spherical balls of steel with a crystalline structure which are used as a shot blasting material. Steel shots have a uniform structure and provide optimum resilience and resistance to fatigue. Also, they are angular in shape and have abrasion resistance quality. They go under a unique casting and segregation process for the perfect shape. Steel shots are used a shot blasting abrasive media.

Steel shots are generally produced by the atomizing process of molten steel. They are widely used in the metalworking industries for various shot blasting applications as an abrasive media due to its non-abrasive process; steel shots produces less dust.

Applications of steel shots

Ferrous and non-ferrous foundries

Steel mills

Coating

Forge shops

Metal fabrications

Sand removal

Metal surface preparation

Advantages of steel shots

Durability

Economic

Recyclable

Provide a completely clean surface

Wheel blast and air powdered system both can be used

Steel shots give an ideal choice for using in the operation of shot blasting due to being available in different sizes and varieties. Steel shots are robust and durable in nature, so they are considered to be the most economical abrasive media. For accelerating steel shot, both wheel blast and air powdered systems are used. A larger steel shot helps in cleaning the rougher surface aggressively. Mostly steel shots are used to overcome condensate strength to torque or loading metal parts such as heavy-duty spring, crankshafts, engine turbine blade. So, basically, steel shots are used for the steel shot blasting process in which bombardment at a material surface occurs with high velocity by using a sandblasting nozzle. This can be done through a rotational nozzle or a wheel.

Supplier of Steel Shots

Dustless blasting machine, One of the best manufacturing company which supplies sandblasting machine, shot blasting machine, grit blasting machines, abrasive blasting machines, cleaning equipment, abrasive media, blasting equipment, safety wears and machine accessories based in Jodhpur, Rajasthan, India. We equipment is serving a lot of industries over many years with the best quality of products at affordable prices.

[dustlessmachine]

Dust Collector | Dust Collector Manufacturer in India

From: dustless blasting machine

Dust collectors are used to collecting dust and other solid impurities from the air or gas in industries. They help in providing a better working and cleaner environment to employees of an industry and also increase the manufacturing efficiencies. The quality of air released can also be enhanced with the help of dust collectors. Industrial dust collectors are different from that air purifiers because air purifiers use disposable filters to remove air pollutants whereas dust collectors have different components that help in improving the air quality.

Types of Dust Collectors

Inertial dust separator is a type of mechanical dust collector which uses inertial, gravitational, and centrifugal forces to remove dust from the object. By using these forces the dust is get temporarily collected in the hopper where the effect of these forces is minimal. This hopper is used for collecting dust particles temporarily.

A cyclone dust collector is a type of inertial dust collector which mainly uses centrifugal force for its dust removal operation. The cyclonic action of the centrifugal force makes the dust to get separate from the gas stream. The dusty air enters through the inlet and with the help of centrifugal force at the helical baffle; heavy dust moves to the interior sidewalls and goes to the base unit. Then the clean air spirals upward and exits at top of the cyclone through the exhaust fan. Here, the centrifugal should be higher so that all the dust particles can be removed easily.

Fabric bag dust collector collects the dust into a filter bag chamber and a dust hopper. Air enters through the inlet and suction is created by the exhaust fan. Due to the loss of momentum, heavy dust particle falls into the hopper and fine particles go to the inner surface of the fabric bag. During this process, all the dust particles which are accumulated in the fabric bag deposited into the hopper from where they can be separated out. Through the blower dust-free air is conveyed out. Fabric bag dust collectors do not need the high voltage, unlike electrostatic precipitators, hence their maintenance cost is much low.

Pleated bag dust collector uses pleated bag elements through which dust-laden air passes. Clean air flows out of the pleated bag through the blower and released into the atmosphere through ducting. After this process, the pleated bag is cleaned through air purging. Dust particles released from pleated bags go to the hopper and collected into dustbins from it. Pleated bag dust collectors mainly look like cartridge dust collectors also functions like it. They provide more areas for the dust removal process.

Cartridge dust collector uses a cartridge chamber to collect dust particles. The dust-air enters through the inlet and passes from the cartridge chamber. The dust-free air collected into the exhaust chamber and then goes out through the blower and chimney. After this cleaning process, the cartridge is cleaned by the high velocity compressed air which extends against the inner surface of the cartridge.

Dustless blasting machine manufacturing company supplies a variety of dust collectors at affordable prices as per the customer requirement. Here, sand blasting machines, shot blasting machines, thermal spray guns, abrasives are also manufactured and supplied to other industries at low prices.

[dustlessmachine]

Shot Blasting Machines | Shot Blasting Machine Manufacturer in India

From: dustless blasting machine

Shot Blasting Machine

Shot Blasting may be a surface treatment process using high-velocity steel abrasive. Shot blasting is a method through which it's possible to get excellent cleaning and surface preparation for secondary finishing operations.

Shot Blasting Machine

Shot blasting concentrates abrasive particles at high speed (65-110 m/second) during a controlled manner at the material thereby removing surface contaminates because of the abrasive impact. Initially, the shot blasting process used compressed air for propelling the steel shot. This method remains in use today for cleaning metal frames and welded elements. Shot blast composition lines use both manual and automatic systems, became potential with the introduction of centrifugal wheel blast machines. When it involves finishing and cleaning operations, the shot blasting surface treatment technique could be a highly effective option. The high-speed controlled shot blast generates an abrasive impact that removes surface contaminants, making it an efficient process for cleaning iron, steel, forgings, machine parts, fixtures, etc.

Features of Shot Blasting Machine

High efficiency: special impeller structure, blasting efficiency reaches 16-19 kg/min.

Protective liner and sealing: the top cover has cast iron and wearable rubber two layers of strength and sealing.

Low noise blast wheel bottom has to cushion rubber, which can reduce vibration.

The runner wheel uses 40 Cr metal carburized and quenched. After processing, a runner needs to be under balance detection.

To keep precision and good balance when it rotates at high speed, all key machining parts are done by the CNC center.

At the same time, you can also check the abrasion status of the impeller and control.

The material of blades, control cage, the impeller is a high chrome alloy, which has a long service life.

The weight difference between each piece of the blade is less than 8 grams, which keeps the wheel has a good balance performance.

It uses two dish impeller wheel, short and high throw ability.

Materials used in Shot Blasting Machine

Shot Blasting Machine chamber uses 8mm thickness steel platters and the protection liner for direct.

The blasted area is 10mm thickness SPMn13 steel floorings.

The front and back chamber uses 5mm diameter steel plates, near the blast chamber area.

We install a 65Mn steel plate for protective purposes.

Bucket elevator and separator use 4mm thickness steel plates.

Roller uses a diameter 121mm seamless steel pipe, a thickness of 6mm.

Metal ducting for dust collector,2mm thickness steel plates.

We are the largest manufacturer of Portable sand blasting machines, a Portable shot blasting machine at the Best Price. Our Prices are economical and we provide a 1-year warranty for our portable sand blasting machines, sand blasting machine.

[dustlessmachine]

Powder Flame Spray Gun | Powder Flame Spray Gun in India for sale

From: dustless blasting machine

Powder Flame Spray Gun

This process is based on a similar operating principle as the wire flame spray process, with the difference that the coating substance is a spray powder. Thus, a bigger selection of spray materials is available, as not all spray elements can be manufactured in wire form.

Powder Flame Spray Gun

In powder flame spraying, the spray material in powder form is melted or fused in an oxy-acetylene flame and propelled onto the prepared workpiece surface with the help of expanding combustion gases. If necessary, an additional gas (e.g. nitrogen) are often used to accelerate the powder particles. The range of spray powders available is enormous, comprising well over 350 different kinds. Powders are classified as self-fluxing and self-adhering. Self-fluxing powders normally require additional thermal post-treatment. In most cases, this “fusing” step is applied using oxy-acetylene torches, which are extremely well-suited to the present task. The adhesion of the spray coating to the bottom material is greatly enhanced by the heat treatment, rendering it impervious to gases and liquids. This substance does not come into direct contact with the oxy-acetylene flame. A powder-feed sand blasting nozzle is located within the center of the flame spray gun. This is surrounded by two ring-shaped nozzle outlets, the inner ring being for air or inert gas, and the outer ring for the thermal energy source, i.e. the oxy-acetylene flame. The element is therefore not melted directly by the flame, but by the heated air and radiation heat. The mobility of flame spraying with powder, e.g. its use on-site, makes it frequently accomplished in its application.

Properties of Coating Powders

When a substance is a flame-sprayed, new and complex material is produced. This is the reason that the quality of the thermal spray gun coating depends upon the quality of the powder. A small variation in the powder can greatly affect the property of the last layer. The particle size distribution in a powder can change the density plus porosity of the coating. Then, Powder meets the best examples of chemical composition, particle shape & size, flow rate & purity.

Applications of Powder Flame Spray Gun

Repairing damaged surfaces.

Temperature/oxidation protection.

Production of functionally graded materials (for either of the above applications).

Industrial Uses

Automotive.

Oil and Gas.

Paper and Printing.

Aerospace.

We are a manufacturer of Flame Spray Guns, Wire Flame Spray Guns, Metal Spray Gun, Thermal Spray Gun, and Zinc Spray Gun. Apart from standardized models, we manufacturers custom-built guns as per consumer requirements. The products are thoroughly tested by the quality department & rigorous development is achieved by a qualified design team in bringing new concepts. We are the Largest Manufacturer of Wire Flame Gun.

[dustlessmachine]

Wire Flame Spray Gun | Wire Flame Spray Gun in India

From: dustless blasting machine

Wire Flame Spray Gun

A wire flame spray gun is using for the coating process over the surface of the substrate to stop it from rust. The wire flame spray gun process is essentially the spraying of molten metal on the surface substrate to supply a coating. within the wire flame spray gun, the fabric in wire form is melted during a flame of oxygen and acetylene (LPG) then atomized with compressed air to make a fine spray.

Wire Flame Spray Gun

Wire Flame spray gun is that kind of process during which uses an oxy-fuel to melt the wires. After melting the heated metal is then atomized with compressed air to supply a spray stream that applies the coating on the surface implying sprayed. Wire flame spray (coating) may be a applies for spray both ferrous & nonferrous material. Important applications are restoring worn-out components, anti-corrosion coating, and conductivity.

Wire Flame Spray Gun Working

The wire is fed into the front torch of flame spray through an air-driven turbine. Fuel gas like acetylene, LPG, Propane & oxygen is correctly and securely mixed within the siphon plug head assembly which provides a combustible heat source. Generally, proper for all metals and metal alloys in wire form is used for spray coating i.e. nickel-base alloy, Zinc spray gun, chrome steel, Copper, Bronze, Steel, Molybdenum, Aluminum Brass, etc. Standard Wire use for the flame spray gun. The molten spray deposit and solidifies on the element surface to make a dense, strongly adherent coating is proper for Corrosion Protection. The superiority of the wire flame spray process is that the coatings are available for nearly instant use with no drying times and therefore the no risk of damaging the element. Flame spray systems can commonly manually performed, semi-automate, or fully-automate the strategy if required.

Applications of Wire Flame Gun

Wear resistance

Friction properties

Corrosion protection

Dimensional restoration

Electromagnetic shielding

Advantages of Wire Flame Spray Gun

Low capital investment

Simple to operate

Easily used for applying pure molybdenum coatings for wear resistance.

Easily use  in areas without electricity supply

We are the manufacturer of Metal Spray Gun, Flame Spray gun, Thermal Spray Gun, Metallizing Gun are the same kinds of equipment – All these are using in Coating so it’s also called as Equipment. We are the Largest Manufacturer of Wire Flame Gun.

[dustlessmachine]

Flame Spray Gun | Flame Spray Gun Price in India

From: dustless blasting machine

Flame spray Gun

When a flame is used in a thermal spray gun for the coating purpose, it is known as a flame spray gun. They provide excellent coatings and enhance surface quality while giving minimum heat input to the base metal.

Product Details:

Gas control unit-10 Bar (pressure rating)

Air control unit-10 Bar (pressure rating)

Gas flow meter-3 GFM/ 2GFM

Wire control unit-Capable of handling Reeled or loose coiled wires 

A trolley with reel-Easily movable

Airflow meter-3 AFM (NLPM & SCFM)

Hose kit-7 mtrs.

Flame Spray Gun

A flame spray gun is basically used to spray molten metal like zinc, copper, aluminum against the surface to enhance the surface quality. It is a type of thermal spray gun. The molten material can be in the form of wire or powder depending on the application. If the zinc is sprayed then it will be called a zinc spray gun, if the copper is sprayed it will be called copper spray gun similarly, for aluminum it will be called an aluminum spray gun.

Working of Flame Spray Gun

Flame spray gun, coating wire, or powder is first melted in the gun then it gets atomized with the help of compressed air and deposits on the surface. The molten metal drops solidify on the surface of the substrate. It is the simplest and among the oldest sprays processes. A flame spray gun also provides corrosion-resistant coatings and also offers a range of spray parameters for an excellent coverage rate and best quality surface finishing.

Advantages of Flame Spray Gun

Available at conventional prices.

Reliable and efficient.

Long-lasting material quality.

Provides high performance.

Easy to utilize.

Features of Flame Spray Gun

Gas flow meter 2GF.

Air control unit.

Airflow meter.

Gun mounting stand.

Regulator Oxygen & LPG.

Safety wears for Flame Spray Gun

Earmuffs.

Industrial goggles.

Mask.

Helmet.

Flame Spray Gun Price in India

Dustless blasting machine manufacturing company provides the flame spray gun, Metalizing Gun, Thermal Spray Gun, Sand Blasting Machine, Sand Blasting Cabinet, Portable Shot Blasting Machine at low prices with the best services. Flame spray guns are very much useful in various kinds of industrial, automobile, and mechanical utilities.  Flame spray guns provide a thick coating on the substrate and protect it from any damage. Customers get the full surety of the product and long term services that fulfill their requirements in their budgets

[dustlessmachine]

Metalizing Gun | Metalizing Gun for Sale in India

From: dustless blasting machine

Metalizing Gun

Metallizing is used to spray metal coatings on fabricated workpieces. The coating metal initially is in wire or powder form. It is fed through a special gun and melted by an oxyfuel gas flame, then atomized by a blast of compressed air. The air and combustion gases transport the atomized molten metal onto a prepared covering, where the coating is formed.

Product Details

Air Pressure-70-100 psi

Form-Wire

Nozzle Size-3.15 mm

Air Inlet-3/8"

Air Consumption-8-9 cfm

Sound Pressure-115 dB

Metalizing Gun

The metalizing gun is widely used in preventing the corrosion of metals. Metal wire or powder is filled at a measured rate into a flame or arc spray gun process and the atomized metal impinges upon the surface being coated and becomes bonded to it. The coating is capable to form protective layers and can also work as a sacrificial anode. That protects the underlying steel or iron resulting in minimum maintenance for years to come. Zinc and Aluminum Wire are the most commonly used. When sprayed on steel, the alloy produces a coating with the best anti-corrosion protection. The metalizing process uses a welding spray gun to enable the welder to place precisely as much or as little weld metal as necessary over any desired surface. Metal deposits as thin as 0.003 in. (0.076 mm) to any desired thickness may be made. The process is versatile, time-saving, and, in some cases, more economical than other welding or repair procedures.

Metalizing Gun Coating Thickness

Cost and service requirements are the basis for determining the practical maximum coating thickness for a particular application, such as building up a worn machine part. Total metalizing cost includes the cost of preparation, oxygen, fuel gas and materials, application time, and finishing operations. If repair costs are too high, it may be more economical to buy a replacement part.

The total thickness for the arc-sprayed coating on shafts is determined by the maximum wear allowance, the minimum coating thickness that must be sprayed, and the amount of stock required for the finishing operation. The minimum thickness that must be sprayed depends on the diameter of the shaft and is given in the table. For press-fit sections, regardless of diameter, a minimum of 0.005 in. (0.127 mm) of coating is required.

Variation in the thickness of the deposit depends on the type of surface preparation used. The thickness of a deposit over a threaded covering varies more than that of a deposit over an abrasive blasted surface, or a smooth shallow prepared by spray bonding. In general, the total variation in thickness that can be expected for routine production spraying with mounted equipment is 0.002 in. (0.051 mm) for deposits from a metalizing wire.

Advantages of Metalizing Gun

It can be operated under extreme temperature conditions.

Pure metals and alloys can be sprayed.

Outer covering roughness not more than 0.05 mm.

Faster and more productive.

Longer lasting than paint.

No cure time or temperature to limit metalizing.

Metalizing Gun for Sale in India

We are the leading manufacturer of flame spray guns, Wire flame spray guns, Metal Spray Gun, Thermal Spray Gun, & Spare Parts. Flame spray gun and Metalizing gun price is low with the finest quality. We work according to the client and focuses on client satisfaction.

[dustlessmachine]

Arc Spray Gun | Electric Arc Spray Gun Price in India

From: dustless blasting machine

Arc Spray Gun

In the Metal Arc spray gun process, the staple within the sort of metallic wires is melted by means of an electrical arc spray gun. The molten material is atomized by compressed air and propelled towards the workpiece and components. Arc Spray Process may be a technique during which electric arc Wire Spraying is completed by the twin Arc spray gun.

Product Details

Applications/Usage-Industrial

Air Pressure-50-70 psi

Nozzle Size-2 mm

Air Consumption-9-10 cfm

Air Inlet-3/8"

Minimum Quantity-1 Piece

Arc Spray Gun

In the Arc spray gun, two metallic wires are used for the coating of raw materials. The two wires are magnetically charged with reversing polarity and stay fed into the arc spray gun, which controls its speed. When the wires are preferred together at the sand blasting nozzle of the flame spray gun, the opposite charges on the wires create sufficient heat to regularly decrease the design of the wires. Compressed air is applied to atomize the heated material and accelerate it onto the workpiece surface to provide the coating.

Electric Arc Spray Gun Price in India

It uses DC power to strengthen the two conductive wires which are positive and negative. With the assistance of a powder feeder, these energized wires are put into a gun head where both the wires arc opposite each other thus, creating the molten material. Coating done through this gun contains a variable thickness; either are often sprayed at 5 mm the thinnest or at 4 mm the thickest coating. And if more thickness is required then the process needs to repeat or we will say must undergo multiple passes.

Applications and Benefits of Arc Spray Gun

The utmost application of the gun is, it is used for anti-corrosion coatings of zinc and aluminum.

Coating life is much more as compared with others.

Most productive and budgetary.

Presence of no iron.

As coatings are anodic it is anti-corrosion in nature.

We can provide all solutions for Zinc Spray Guns, Flame Spray Guns, Powder Flame Spray Guns with the application needed for the spray coating. We have proven reliable & promising to our customers for what we offer a complete package of  Arc Spray Equipments. Our focus is to improve the  Arc Spray Gun in terms of Efficiency of spraying, Proficiency coating, etc. Some of the parameters we are still working to provide full flesh solutions towards the  Arc Spraying techniques.

[dustlessmachine]

Thermal Spray Gun | Thermal Spray Gun Manufacturer in India

From: dustless blasting machine

Thermal Spray Gun

A thermal spray gun is a spraying gun within which the molten liquid of abrasive is sprayed on the topic. This lays down a coating onto the surface of the topic. because the name suggests Thermal spray gun means a substance thermally sprayed on the subject.

Product Details:

Air Pressure-70-100 psi

Nozzle Size-3.15 mm

Form-Wire

Item Weight-15 Kg

Air Consumption-8 to 9 cfm

Air Inlet-3/8"

Sound Pressure-115 dB

Usage/Application-Flame

Thermal Spray Gun

Thermal spray gun property is generally determined by including its porosity, oxide content, macro and micro-hardness, bond durability, and surface hardness. Usually, the coating condition develops with increasing particle velocities. Thermal spray gun Price may be a cost-effective means for improving surface characteristics. We support all popular thermal sprinkle method, with choices to fit your surfacing and everyone other purposes elements – like the dimensions of your run, the size of your part, environmental matters, and portability responsibility.

Thermal spraying is a combination of methods where the raw material is heated and moved as single particles or droplets over a surface. The thermal spray gun creates the specified heat by using ignitable gases or an electric arc spray gun. because the elements are heated, they're converted to an artificial or molten state and are defined and stimulated by a gas stream to the substrate. The particles hit the substrate, smooth, and form small platelets (splats) that follow and cling to the individuality of the treated substrate and to every other. because the sprayed particles touch simultaneous on the surface, they cool and build-up, into a composition making the thermal spray coating.

Thermal Spray Gun Working

Thermal spray gun sprinkle can come up with solid layers(approx. thickness scope is 22 microns to many mm, counting on the method and raw materials), over an outsized area at a high deposition rate as associated with more methods like electroplating, solid and chemical vapor declaration. Thermal spray aluminum gun materials available for thermal spray include metals, alloys, ceramics, plastics, and composites.

Types of thermal Spray Gun

Flame Spray Gun

Wire Flame Spray Gun

Powder Flame Spray Gun

HVOF Gun

Arc Spray Gun

Twin Arc Spray Gun

Thermal Spray Gun Manufacturer in India

We are the manufactures of the best-designed models for thermal spray guns as per their applications. The prices of thermal spray guns are in the budget of the customers, they can afford them easily. From ordering to delivering, We give assurance of providing the best service. The thermal spray guns available here are capable of working on any type of work-piece geometry.

[dustlessmachine]

Blast Room System | Blast Room Manufacturer in India

From: dustless blasting machine

Blast room system

Blast room system is used for surface preparation of large parts and to make environment dust free. Blast room system are manufactured as per the component size of the customers. Blast room system is made of metallic sheet bolted together .

Blast room system

Product Details:

Steel Grade- 304

Height-7 feet

Area-15x8 square feet

Surface Area- Color Coated

Blast Room System

The blast room system is used for blasting large components. Each blast room system is made for the specific requirement of each individual customer. Each element of the blast room is balanced with the other elements to ensure that the flow of blasting media, the flow of the product, and the flow of dust are smooth. The blast room is made by joining metal sheet panels. Inside of the blast room system, rubber lining is used to protect the side of the blast room system. Different sizes of rubber linings are used in a blast room as per the customer requirement. As the shape of blasting media varies so that to protect room walls rubber lining is used.

The blast room system contains

Sand blasting machine

Dust collector

Mechanical Recovery system(screw conveyor, bucket elevator, media separator)

Sand Blasting machine is used for surface preparation of parts. A dust collector is used to collecting dust and clean the inside area of blast room the so that the operator can see the parts easily and the room is free from dust. Screw conveyors and bucket elevators are mechanical recovery systems. A screw conveyor is used to collecting the media on the blast room floor and a bucket elevator is used to collect blasting media and refill in the blasting pot. A media separator is used to separate the reused material from the very fine powder. The size of the blast room changes according to the size of the components. In fully automatic mechanical recovery the whole floor is covered with screw conveyors. As the size of the blast room changes screws conveyor and bucket elevator size also changes.

We provide All types of portable shot blasting machines, Blast room System, Dust collectors, abrasive media for blasting, vacuum blasting machine, and Airless blasting machine.