deeplighttechnology - Tumblr blog

[deeplighttechnology]

Japan Jate certification test cases

Basic functions

Calling functions

Transmission timing

Random access control

Time alignment control

Location registration control

Function for complying with channel switching indication

Functions for receiving level reports

Functions to comply with the direction to stop transmission

Function automatically to suspend transmission when the  receiving level has become degraded

Function automatically to suspend transmission

Function to ensure important communication

Tele:(+86)755-89202795  |||   Whatsapp: +86-13266518903   |||   WeChat: lay999

[deeplighttechnology]

NRTL certification and UL standards testing

NRTL(Nationally Recognized Testing Laboratory) certification and UL standards testing is used for the safety certification of electrical and electronic products exported to the North American market.

In general, safety certification in North American market is not mandatory, but most products exported to North American market will voluntarily apply for these certification and testing. Because consumers are very concerned about the safety of their products.

Amazon and AliExpress aslo often require NRTL certification or UL standards testing for chargers, lithium battery products, and electronic products.

UL60950

UL62368

UL1778

UL1786

UL2089

UL2743

UL588

UL 94…

A product certified by NRTL or UL standards testing indicates that the product meets the requirements of one or more appropriate safety testing standards, easily obtain consumer trust in the product.

Deeplight Technology has carried out NRTL certification and UL standards testing for many years and has rich experience. We will select the appropriate safety test standards according to the customer’s products, quickly assist customers to finish the product testing, obtain pass for sales in the North American market, thereby gaining a larger market. Welcome to consult us.

Email:jl@dlce.com ||| Tele:（+86）755-89202795

Whatsapp: +86-13266518903 ||| WeChat: lay999

[deeplighttechnology]

LoRa wan certification

Introduction to LoRa wan certification

As a new communication method for the Internet of Things, LoRa is an ideal network configuration with the advantages of low power consumption and large-scale coverage. Since it is a communication method, there must be interoperability requirements between data terminals and base stations (gateways). Therefore, the LoRa Alliance requires that LoRa devices must meet the LoRaWAN protocol specification requirements.

2. LoRa wan certification regional test:

(1) The certification requirements for terminal equipment in 863-870 MHz region of EU.

(2) The certification requirements for USA + Canada 902-928 MHz regional terminal equipment.

(3) The certification requirements for terminal equipment in Asia 923 MHz region, LoRa AS923 requirements are for products working between 915 and 928 MHz.

Some Asian countries still have ISM bands in this range. As a result, LoRa technology has been more and more widely used in Asia.

(4) The certification requirements for 920-923 MHz in South Korea.

3. LoRa Alliance Member Level

The membership fee is 12 months and can be renewed on the anniversary of the membership contract.

(1) Adopter Membership 3,000 USD\1 year

(2) Contributor Membership 20,000 USD\1 year

(3) Sponsor Membership 50,000 USD\1 year

(4) Free for Institutional Membership

Institutional membership application requirements are: approval by the board of directors, non-profit organizations, institutions of higher learning or university institutions, etc., institutional members must be reviewed once a year.

Different members have different permissions, such as whether they can have board seats, whether they can participate in board voting, whether they can obtain alliance operation data, whether they can obtain alliance news documents, and so on.

It is the same in terms of whether it can be tested and certified and the LoRa Alliance logo can be used.

This is an introduction to the LoRa WAN Alliance certification, welcome to contact Deeplight for LoRa WAN Alliance certification service, we look forward to your contact.

Please to send product manual and product specifications to us，ask for a quote，we will reply the quotation within 1-2 days.Look forward to our cooperation.

Email：sin@dlcer.com WeChat：dlcert

Mobile：+86-18038042309     Tel：+86-755-8920 2795

[deeplighttechnology]

Deeplight Technology Bluetooth protocol BQB certification services

Bluetooth BQB certification is a routine projects now. Most of Bluetooth BQB certification are end product certification. For many end product BQB certifications, only the lowest layer RF testing +top layer application profiles testing are required, which is easy to testing.

So, who will test the Buetooth protocol stack layer? Generally,Bluetooth chip companies\Bluetooth solution companies\Bluetooth protocol stack software development companies need testing Buetooth protocol stack layer.

Deeplight Technology has a case which Bluetooth product need testing profile and RF to protocol.

At present, the Deeplight Technology has begun to carry out the Bluetooth protocol stack BQB certification testing, which includes all the protocol layer testing such as BLE 2M rate\coded\stable modulation index\AoA\AoD\BLE audio…

The Bluetooth BQB certification testing has the following layers according to the Bluetooth SIG:

(1) The lowest Bluetooth physical layer:RF, RF-PHY.

(2) Intermediate protocol stack layer: BB, LL, LMP, L2CAP, HCI, SDP, GAP, SM, GATT, ATT, etc.

(3) The top layer application profiles: such as A2DP, HFP, HSP, AVRCP, GAVDP, OPP, FTP, HID, etc.

A end Bluetooth product contains controller part and host part. The controller part contains radio frequency and controller protocol, and the host part contains host protocol and profile part. The Bluetooth BQB certification types that can be selected End Product or Component or Subsystem (Host\controller\profile these 3 types), you can choose Bluetooth BQB certification type according to your needs.

In terms of testing, RF testing can be done by RF testing systems, and the host part can also be tested by PTS. But for the controller protocol part, currently only the sniffer Bluetooth Protocol Analyzers EBQ can meet all the testing cases requirements.

Through the Bluetooth Protocol Analyzers EBQ protocol analysis and packet capture and decoding tool, the communication data of 79 BR/EDR channels and 40 BLE can be captured at real time, and all the Bluetooth protocol analysis processing can be displayed, which can quickly solve the BUG that appears.

Bluetooth Controller protocol includes Baseband of classic Bluetooth, Link Management Protocol, Link Layer of BLE, and HCI layer. Generally, when the Bluetooth chip is certified, it will testing the controller protocol part for the end product can combination pass the BQB certification. If the end product needs to be certified and lacks the necessary protocol layer, as a result, the end product unable to be certified, or the protocol tests need to be completed, which is a huge overhead in the time and cost.

To testing the Controller protocol, the customer needs to provide ICS to confirm the specific testing cases, and need to provide a sample that supports standard serial communication, either conduction test or radiation test.

Sniffer Bluetooth Protocol Analyzers support USB HCI, UART capture, HCI and SPI HCI. All HCI traffic is captured and displayed in highly optimized analysis software. HCI capture is also a very convenient function. Using devices that realize safe and simple pairing, any link key exchanged and used by HCI can decrypt wireless traffic without any user interaction.

From Bluetooth end product BQB certification to Bluetooth protocol stack BQB certification, the test cases are larger and the testing requirements are more. Deeplight Technology has sufficient experience to help customers complete complex Bluetooth protocol stack BQB certification, Bluetooth chip BQB certification, Bluetooth module BQB certification, of course including simpler Bluetooth end product BQB certification. Welcome customers to consult us for ALL Bluetooth BQB certification.

Email: Jl@dlcer.com         Official website: www.dlcer.com

[deeplighttechnology]

Deeplight wireless products RF radio frequency testing service

Wireless products test items include electromagnetic compatibility EMC test, RF radio frequency test, safety test, SAR test, etc. Among them, RF test is one of the important test areas, and the test cases is relatively large.

We introduce the RF test content of BT\WIFI\GSM\WCDMA products.

(1)Bluetooth and Wifi product RF testing (spectrum analyzer, simulated base station, power splitter, attenuator)

(2)GSM RF test (spectrum analyzer, simulated base station, power splitter, attenuator)

(3)WCDMA FCC RF test (spectrum analyzer, simulated base station, power divider, attenuator)

Deeplight Technology Advantages：

（1）We more than ten years of experience in handling PTCRB\GCF\JATE\BQB\Telec\JATE\LoRa\FCC\SAR\RF\OTA\EMC...product certification and testing, and the engineering project team can professional and quickly deal with such projects.

（2）DeepLight has helped many listed companies successfully complete certification.

（3）Our quotation will be preferential.

（4）Our professional engineering project team can provide nanny service and effective communication.

（5）Feedback the testing process in time to let customers know the progress of the project, and is critical path to hold the project progress well.

Our skilled engineering project team can provide the recommending measures for test fail.

Please to send product manual and product specifications to us，ask for a quote，we will reply the quotation within 1-2 days.Look forward to our cooperation.

Email： info@dlcer.com WeChat：lay999 Mobile：+86-13266518903    

Tel：+86-755-8920 2795 Web:www.dlcer.com

[deeplighttechnology]

Create Deeplight Technology Specific Absorption Rate testing service

Brief introduction of SAR

The electromagnetic radiation of mobile phones and other wireless products has always been a matter of close concern to the public. What is the measure of this radiation? There is a term here called SAR. The full name of SAR is Specific Absorption Rate. It is the electromagnetic wave energy absorption ratio of mobile phones or wireless products. The meaning of SAR is the electromagnetic power absorbed or consumed per unit mass of human tissue, in W/kg.

Basic requirements of SAR testing

The ambient temperature is between 18°C and 25°C, and the liquid temperature change during the measurement process cannot exceed ±2°C.

The environmental electromagnetic noise cannot exceed 0.012W/Kg.

The tested wireless communication device cannot be connected to the local public communication network.

The influence of reflection and auxiliary RF transmitter should be less than 3% of the measured SAR value.

Basic preparation for SAR test

(1) The dielectric properties of the tissue fluid must be measured before the SAR test. When measuring the dielectric properties, the temperature of the tissue fluid should be the same as in the SAR measurement process, and the temperature change should not exceed ±2℃.

(2) Tissue fluid calibration (to ensure that the measured two dielectric parameters are within ±5% of the target value in Table 1).

(3) For the horizontally arranged human body model, the depth of the tissue fluid into it should be at least 15 cm above the ERP, and there should be no air bubbles.

Preparation of the wireless device to be tested

(1) The transmitter, antenna, battery, and accessories inside the wireless device under test should be specified by the manufacturer. The battery should be fully charged before the measurement, and there should be no other external cable links during the measurement.

(2) The base station controls the output power and operating frequency of the equipment, and the wireless equipment should be set to transmit at the highest power level.

(3) The prototype used in the test must be confirmed to have exactly the same mechanical and electrical characteristics as its commercial version.

Points to note before testing SAR

(1) Antennas. At this stage, the mobile phone antennas are mainly Monopole and PIFA antennas. Both antennas have their own characteristics. Therefore, you should have a certain understanding of the two antennas before using them. The antenna placement, materials, and directivity are controlled to meet the requirements of SAR.

(2) Power. If the antenna and PCB board are inconvenient when the product is formed, we need to adjust the power of the mobile phone to reduce the SAR value. Especially when testing GPRS, due to multiple uplink channels, if the power is not adjusted, the SAR is easily exceeded.

Deeplight Technology Advantages：

（1）We more than ten years of experience in handling PTCRB\GCF\JATE\BQB\Telec\JATE\LoRa\FCC\SAR\RF\OTA\EMC...product certification and testing, and the engineering project team can professional and quickly deal with such projects.

（2）DeepLight has helped many listed companies successfully complete certification.

（3）Our quotation will be preferential.

（4）Our professional engineering project team can provide nanny service and effective communication.

（5）Feedback the testing process in time to let customers know the progress of the project, and is critical path to hold the project progress well.

Our skilled engineering project team can provide the recommending measures for test fail.

Please to send product manual and product specifications to us，ask for a quote，we will reply the quotation within 1-2 days.Look forward to our cooperation.

Email：jl@dlcer.com     WeChat：lay999      Mobile：+86-13266518903     Tel：+86-755-8920 2795

[deeplighttechnology]

Deeplight Technology OTA testing service of wireless products

1.There are two methods to test the radiation performance of wireless product.

(1)PASSIVE test:

Test the product antenna's radiation performance,passive testing focuses on product antenna's radiation performance from the antenna's gain, efficiency, pattern and other antenna radiation parameters. Commonly used test cases are:

Return Loss; Directivity; Gain, dBi or dBd.

Efficiency; Radiation Pattern (direction diagram).

Effective Isotropic Radiated Power (Gain + Transmit Power).

Input Impedance (antenna interface impedance test).

VSWR, RL (antenna standing wave ratio, return loss test); 3D (3D field strength map).

3dB BW, FB Ratio (beam width, front-to-back ratio).

Cross polar, Isolation (cross polarization ratio, isolation).

Directivity; Efficiency.

(2)ACTIVE test:

In the microwave anechoic chamber,testing of the radiated power and receiving sensitivity of the product,namely TRP and TIS. This method can better reflect the overall radiation performance of the product Wireless performance. OTA active test cases:

TRP (total radiated power); TIS (Total Isotropic Sensitivity); RS (receiving sensitivity determination relative to the reference channel)

SS (sensitivity scan); EIRP (equivalent isotropic radiated power); EIS (equivalent omnidirectional receiving sensitivity)

2. TRP (total radiated power) and TIS (Total Isotropic Sensitivity) test methods and requirements.

(1)TRP test requirements

EUT is transmitting at maximum power;

Non-portable EUT needs to be tested in free space;

Portable EUT test under the condition of human head model;

4) In each frequency band supported by EUT, test the three channels of high, middle and low;

5) For the EUT of the retractable antenna, it needs to be tested separately under two conditions.

3.Which organizations develop OTA test standards?

(1)PTCRB PCS Type Certification Review Board

(2)CTIA The Wireless Association

(3)3GPP The 3rd Generation Partnership Project

Welcome to contact Deeplight info@dlcer.com for wireless product OTA testing. Our experienced team of engineers can also assist customers completing RF testing\EMC testing, etc.

Email: jl@dlcer.comWeChat:dlcert        Mobile:+86-18038042309     Tel:+86-755-8920 2795

[deeplighttechnology]

Japan PSE certification

一、Japan PSE certification introduction

All products that belong to the catalog in the Japanese PSE certification must obtain product certificate and affix the Japan PSE certification mark on the product to enter the Japanese market.

Japan round PSE certification products have more categories. The round PSE certification requirements are simpler than the Japan diamond PSE certification. The Japan diamond-shaped PSE certification is more complicated and requires factory inspections.

PSE certification is a compulsory safety certification in Japan. It is used to prove that electrical and electronic products have passed the safety standards test of the Japanese Electrical and Material Safety Law (DENAN Law) or international IEC standards. Japan's DENTORL Act (Electrical Device and Material Control Act) stipulates that 506 products must pass safety certification to enter the Japanese market. Among them, 165 types of A products should obtain the diamond-shaped PSE mark, and 341 types of B products should obtain the circular PSE mark.

二、Applicable product range

Diamond PSE

Electric wires, wiring appliances, current limiters, transformers, stabilizers, electric heating appliances, electric power application machinery, AC electrical machinery, portable generators, other AC machinery, electrical conduits, small AC motors, light sources and light sources Applied machinery, batteries, etc. belong to the product range specified by the Safety Law for Certain Electrical Supplies, such as: DC power supply devices, switches and sockets, electric water heaters, power cords and plugs, other household appliance transformers (AC-AC power products), etc. 165 products.

Round PSE

Products that fall outside the specific electrical appliance safety law, such as: electric blankets, electric steamers, electric irons, electric ovens, microwave ovens, hair humidifiers, refrigerators, electric mixers, electric egg cookers, and electric insulation basins , Hair dryer, electric humidifier, projector, washing machine, incandescent bulb, fluorescent lamp, table lamp, decorative lamp, advertising lamp, lithium battery and all 341 products such as LED bulbs and LED lamps.

This is the introduction of PSE certification in Japan. Deeplight Technology is familiar with several Japanese Compulsory Certifications of electronic products,such as Japan radio law Telec certification (applicable for wireless products), Japan telecommunication law JATE certification (telecommunication products) and so on.Welcome to contact us about Japan certification.

Email: jl@dlcer.comWeChat:dlcert        Mobile:+86-18038042309     Tel:+86-755-8920 2795

[deeplighttechnology]

Deeplight Technology Bluetooth protocol SRRC certification services

Let’s see why there is a radio transmission equipment type approval certification\SRRC certification. Background: According to the "Regulations of the People's Republic of China on Radio Management"(Regulations of the People's Republic of China on Radio Management), in order to strengthen radio management, maintain the order of air waves, effectively develop and utilize radio spectrum resources, and ensure various radio services.

The Regulation shall be observed in the use of radio frequencies, the establishment and use of radio stations (stations), the R&D, production, import, sale and maintenance of radio transmitting equipment.

All radio transmission equipment produced in the territory of the People’s Republic of China must hold the "Radio Transmission Equipment Type Approval"certificate issued by the State Radio Regulation Committee (SRRC) after the type approval.The type approval code CMIIT ID must be marked on the label of the equipment.

Annexes : 1. Radio Transmission Equipment Type Approval Certificate (sample) 2. Application Form for Radio Transmission Equipment Type Approval (sample) 3. Application Form for the Importation of Mechanical and Electrical Products (sample) 4. Certificate for the Importation of Mechanical and Electrical Products (sample) 5. Registration Form for the Importation of Mechanical and Electrical Products (sample) 6. Declaration Form for Customs Entry of Radio Equipment (sample) 7. Ratification Statement for Customs Entry of Radio Equipment (sample)

For any radio transmission equipment that are exported to China, the foreign businessman involved should possess a “ Radio Transmission Equipment Type Approval Certificate ” ( see Annex 1) issued by the Office of State Radio Regulatory Commission of the People’s Republic of China ( hereinafter referred to as SRRC Office ) and a Type Approval Identifier( hereinafter referred to as SRRC ID ) should be marked on the equipment.

Application SRRC need to prepare the information 1 application form (two copies) 2 power of attorney (two copies) 3 customer's business license (license Business) 4 the customer's ISO certificate or company profile and the company's ability to explain 5 the circuit diagram of the product, instruction manuals, block diagrams, related test reports (such as ID FCC) 6 antenna gain (Peak Gain Antenna) and pattern Antenna 7 test instruction (direction Test) 8 the company's business license (annual inspection can not be expired) 9 EUT color photos 3 copies (must contain the various interfaces and the side) 10 frequency channel control table (if there are a lot of work channels to provide, such as DSSS or FHSS working mode of the product)

Deeplight Technology specially arranges professional RF engineers to directly connect with SRRC let you save time and effort, one-stop finish SRRC certificate.

Email: sin@dlcer.com        WeChat：dlcert

Mobile：+86-18038042309     Tel：+86-755-8920 2795

[deeplighttechnology]

Deeplight Technology Bluetooth protocol BQB certification services

Bluetooth BQB certification is a routine projects now. Most of Bluetooth BQB certification are end product certification. For many end product BQB certifications, only the lowest layer RF testing +top layer application profiles testing are required, which is easy to testing.

      So, who will test the Buetooth protocol stack layer? Generally,Bluetooth chip companies\Bluetooth solution companies\Bluetooth protocol stack software development companies need testing Buetooth protocol stack layer.

Deeplight Technology has a case which Bluetooth product need testing profile and RF to protocol.

At present, the Deeplight Technology has begun to carry out the Bluetooth protocol stack BQB certification testing, which includes all the protocol layer testing such as BLE 2M rate\coded\stable modulation index\AoA\AoD\BLE audio…

The Bluetooth BQB certification testing has the following layers according to the Bluetooth SIG:

     (1) The lowest Bluetooth physical layer:RF, RF-PHY.

     (2) Intermediate protocol stack layer: BB, LL, LMP, L2CAP, HCI, SDP, GAP, SM, GATT, ATT, etc.

     (3) The top layer application profiles: such as A2DP, HFP, HSP, AVRCP, GAVDP, OPP, FTP, HID, etc.

A end Bluetooth product contains controller part and host part. The controller part contains radio frequency and controller protocol, and the host part contains host protocol and profile part. The Bluetooth BQB certification types that can be selected End Product or Component or Subsystem (Host\controller\profile these 3 types), you can choose Bluetooth BQB certification type according to your needs.

In terms of testing, RF testing can be done by RF testing systems, and the host part can also be tested by PTS. But for the controller protocol part, currently only the sniffer Bluetooth Protocol Analyzers EBQ can meet all the testing cases requirements.

Through the Bluetooth Protocol Analyzers EBQ protocol analysis and packet capture and decoding tool, the communication data of 79 BR/EDR channels and 40 BLE can be captured at real time, and all the Bluetooth protocol analysis processing can be displayed, which can quickly solve the BUG that appears.

Bluetooth Controller protocol includes Baseband of classic Bluetooth, Link Management Protocol, Link Layer of BLE, and HCI layer. Generally, when the Bluetooth chip is certified, it will testing the controller protocol part for the end product can combination pass the BQB certification. If the end product needs to be certified and lacks the necessary protocol layer, as a result, the end product unable to be certified, or the protocol tests need to be completed, which is a huge overhead in the time and cost.      

      To testing the Controller protocol, the customer needs to provide ICS to confirm the specific testing cases, and need to provide a sample that supports standard serial communication, either conduction test or radiation test.

Sniffer Bluetooth Protocol Analyzers support USB HCI, UART capture, HCI and SPI HCI. All HCI traffic is captured and displayed in highly optimized analysis software. HCI capture is also a very convenient function. Using devices that realize safe and simple pairing, any link key exchanged and used by HCI can decrypt wireless traffic without any user interaction.

       From Bluetooth end product BQB certification to Bluetooth protocol stack BQB certification, the test cases are larger and the testing requirements are more. Deeplight Technology has sufficient experience to help customers complete complex Bluetooth protocol stack BQB certification, Bluetooth chip BQB certification, Bluetooth module BQB certification, of course including simpler Bluetooth end product BQB certification. Welcome customers to consult us for ALL Bluetooth BQB certification.

Email: sin@dlcer.com              WeChat：dlcert

Mobile：+86-18038042309     Tel：+86-755-8920 2795

[deeplighttechnology]

Deeplight Technology Bluetooth protocol BQB certification services

Bluetooth BQB certification is a routine projects now. Most of Bluetooth BQB certification are end product certification. For many end product BQB certifications, only the lowest layer RF testing +top layer application profiles testing are required, which is easy to testing.

      So, who will test the Buetooth protocol stack layer? Generally,Bluetooth chip companies\Bluetooth solution companies\Bluetooth protocol stack software development companies need testing Buetooth protocol stack layer.

Deeplight Technology has a case which Bluetooth product need testing profile and RF to protocol.

At present, the Deeplight Technology has begun to carry out the Bluetooth protocol stack BQB certification testing, which includes all the protocol layer testing such as BLE 2M rate\coded\stable modulation index\AoA\AoD\BLE audio…

The Bluetooth BQB certification testing has the following layers according to the Bluetooth SIG:

     (1) The lowest Bluetooth physical layer:RF, RF-PHY.

     (2) Intermediate protocol stack layer: BB, LL, LMP, L2CAP, HCI, SDP, GAP, SM, GATT, ATT, etc.

     (3) The top layer application profiles: such as A2DP, HFP, HSP, AVRCP, GAVDP, OPP, FTP, HID, etc.

A end Bluetooth product contains controller part and host part. The controller part contains radio frequency and controller protocol, and the host part contains host protocol and profile part. The Bluetooth BQB certification types that can be selected End Product or Component or Subsystem (Host\controller\profile these 3 types), you can choose Bluetooth BQB certification type according to your needs.

In terms of testing, RF testing can be done by RF testing systems, and the host part can also be tested by PTS. But for the controller protocol part, currently only the sniffer Bluetooth Protocol Analyzers EBQ can meet all the testing cases requirements.

Through the Bluetooth Protocol Analyzers EBQ protocol analysis and packet capture and decoding tool, the communication data of 79 BR/EDR channels and 40 BLE can be captured at real time, and all the Bluetooth protocol analysis processing can be displayed, which can quickly solve the BUG that appears.

Bluetooth Controller protocol includes Baseband of classic Bluetooth, Link Management Protocol, Link Layer of BLE, and HCI layer. Generally, when the Bluetooth chip is certified, it will testing the controller protocol part for the end product can combination pass the BQB certification. If the end product needs to be certified and lacks the necessary protocol layer, as a result, the end product unable to be certified, or the protocol tests need to be completed, which is a huge overhead in the time and cost.      

      To testing the Controller protocol, the customer needs to provide ICS to confirm the specific testing cases, and need to provide a sample that supports standard serial communication, either conduction test or radiation test.

Sniffer Bluetooth Protocol Analyzers support USB HCI, UART capture, HCI and SPI HCI. All HCI traffic is captured and displayed in highly optimized analysis software. HCI capture is also a very convenient function. Using devices that realize safe and simple pairing, any link key exchanged and used by HCI can decrypt wireless traffic without any user interaction.

       From Bluetooth end product BQB certification to Bluetooth protocol stack BQB certification, the test cases are larger and the testing requirements are more. Deeplight Technology has sufficient experience to help customers complete complex Bluetooth protocol stack BQB certification, Bluetooth chip BQB certification, Bluetooth module BQB certification, of course including simpler Bluetooth end product BQB certification. Welcome customers to consult us for ALL Bluetooth BQB certification.

Email: sin@dlcer.com               WeChat：dlcert

Mobile：+86-18038042309     Tel：+86-755-8920 2795

[deeplighttechnology]

Japan Radio Law and Japan Telec certification

When wireless products launch Japan market, will be encounter a compulsory certification called Japan Radio Law certification, commonly known as telec certification or called R certification.

In addition, there are names such as Japan MIC certification, giteki certification, JRL certification. Japan JRL certification is mainly used to control the radio frequency of the product.

Mainly testing items:

frequency error, antenna power density, channel bandwidth, dwell time, etc.

Most of the testing items of WiFi and Bluetooth products are similar to the EN 300 328, but the testing items are simpler and less than the EN 300 328.

After successful application for Japan Radio Law certification, The certification authority RCB will issue a Japan Radio Law certificate that include ID number.The manufacturer needs to mark the Japan Radio Law certification logo and ID number together on the product,so that the product to be legally sold in the Japanese market.

To apply for Japan Radio Law certification, the required files list are as follows:

Block Diagram, BOM, product photos,

User Manual, Circuit Diagram, PCB layout,

Antenna Specifications, Quality System declaration or certificate (Declaration of Quality Management System or ISO certificate).

The files list are only accepted in English or Japanese. The same is for test reports. In addition, you need to pay attention to the number of models when submitting. If the number of models is too many it may need to conduct product differentiation testing or submit model review fees. Japan’s Radio Law certification requires manufacturers to be obliged to keep the certification data for 10 years

Deeplight Technology has many years of experience in assisting customers to apply for a series of certifications in Japan, not only the Japanese Radio Law, but also the Japanese Telecommunications Law certification, and the Japanese PSE certification. Welcome to consult us about certifications related to Japan.

Email: sin@dlcer.com               WeChat：dlcert

Mobile：+86-18038042309     Tel：+86-755-8920 2795

[deeplighttechnology]

How GCF certification

Ask.3  Types of GCF certification

（1）Initial Full test against all criteria.

（2）Variant Only test impacted part against Initial model.

（3）Certified Module Under the optimized scheme, testing focuses on functionality such as antenna, SIM contacts and user-interface that are specifically provided by the connected product rather than its embedded module.

（4）Certified Platform GCF Platform Certification enables designers and manufacturers to develop innovative new connected products around pre-certified mobile communications functionality. This use of previously certified functional blocks, or “platforms”, allows the testing phase of product development to be more focused and cuts the total cost of obtaining GCF Certification for new connected products.

DeepLight Advantages：

（1）We more than ten years of experience in handling PTCRB certification and GCF certification, and the engineering project team can professional and quickly deal with such projects.

（2）DeepLight has helped many listed companies successfully complete the PTCRB certification and GCF certification.

（3）Because China mainland can finish the testing cases, our quotation will be preferential.

（4）Our professional engineering project team can provide nanny service, smooth and effective communication.

（5）Feedback the testing process in time to let customers know the progress of the project, and is critical path to hold the project progress well.

(6) In order to finish the PTCRB certification and GCF certification, the DeepLight  can also complete the WiFi alliance certification, FCC ID certification, IC ID certification, IMEI TAC code application.

Because there are many test cases of PTCRB certification and GCF certification, the testing time is long, and it will be some cases fail. Therefore, the experience of the project team is particularly critical. Our skilled engineering project team can provide the recommending measures for test fail. If the test fail is delayed and no one dealing with it, this may cause the whole project to fail.

Please to send product manual and product specifications to us，ask for a quote，we will reply the quotation within 1-2 days.Look forward to our cooperation.

Email：sin@dlcer.com WeChat：dlcert

Mobile：+86-18038042309      Tel：+86-755-8920 2795

[deeplighttechnology]

How PTCRB certification

Ask.1  Types of PTCRB certification

（1）Initial Full test against all criteria.

（2）Variant Different model name. Only test impacted part against Initial model.

（3）ECO Same model name. Only test impacted part against Initial model.

（4）Integration Under the optimized scheme, testing focuses on functionality such as antenna, SIM contacts and user-interface that are specifically provided by the connected product rather than its embedded module.

（5）Re-Branding No testing required, only documentation.

Ask.4 PTCRB certification test requirements document

PPMD PTCRB Program Management Document

NAPRD03 Permanent Reference Document NAPRD03

DeepLight Advantages：

（1）We more than ten years of experience in handling PTCRB certification and GCF certification, and the engineering project team can professional and quickly deal with such projects.

（2）DeepLight has helped many listed companies successfully complete the PTCRB certification and GCF certification.

（3）Because China mainland can finish the testing cases, our quotation will be preferential.

（4）Our professional engineering project team can provide nanny service, smooth and effective communication.

（5）Feedback the testing process in time to let customers know the progress of the project, and is critical path to hold the project progress well.

(6) In order to finish the PTCRB certification and GCF certification, the DeepLight  can also complete the WiFi alliance certification, FCC ID certification, IC ID certification, IMEI TAC code application.

Because there are many test cases of PTCRB certification and GCF certification, the testing time is long, and it will be some cases fail. Therefore, the experience of the project team is particularly critical. Our skilled engineering project team can provide the recommending measures for test fail. If the test fail is delayed and no one dealing with it, this may cause the whole project to fail.

Please to send product manual and product specifications to us，ask for a quote，we will reply the quotation within 1-2 days.Look forward to our cooperation.

Email：sin@dlcer.com WeChat：dlcert

Mobile：+86-18038042309     Tel：+86-755-8920 2795

[deeplighttechnology]

How BQB Certifications

Now more and more computers, tablets, cars, mobile phones, smart home, sports equipment, audio and video equipment have Bluetooth function. Everywhere, pairing is more and more simple, security is also constantly improving,it become a communication technology that often used in life and work.

How to make Bluetooth products meet the technical specifications and obtain the authorization of using Bluetooth SIG logo? That is simply to say, it is need to finish the Bluetooth BQB certification.

How to get Bluetooth BQB certification?

(1)Become a member of Bluetooth SIG.

DeepLight can help customers to register Bluetooth SIG member.

(2)Testing product.

if it is a end product, generally needs to testing RF + profile(like A2DP\HFP\HSP\AVRCP\OPP\FTP).Single mode testing BR\EDR RF+profile,dual mode testing BR\EDR+BLE(RF+PHY\RF) +profile.If it is a chip or software,it may need testing protocol(like BB\LMP\L2CAP\LL\SM).

DeepLight has a lot of experience testing all Bluetooth products from end products to chips.

（3）Pay DID fee to Bluetooth SIG.

Adopter member is 8000USD DID,Associate member is 4000USD DID.

(4)Submit Documents to Bluetooth SIG.

Like TPG,test reports,test evidence,test plan。

(5)Finish product listing.

After finish the listing, you can get the BQB certificate,and you can search company name\product name\model name listing in Bluetooth official website.At this time, you can shipping, customs clearance and sell in the market.

DeepLight very good at BQB certification, from certification process to testing profile or RF, more than ten years of testing experience, we can assist customers quickly finish BQB certification.If there is any need,please feel free to contact us.

Email: sin@dlcer.comWeChat：dlcert

Mobile：+86-18038042309     Tel：+86-755-8920 2795