cobbparkwaylocksmith

[cobbparkwaylocksmith]

How to Reset the Combination on a Dial Lock

How to Reset the Combination on a Dial Lock https://www.cobbparkwaylocksmith.com/how-to-reset-the-combination-on-a-dial-lock-2/ How to Reset the Combination on a Dial Lock Having troubles with unlocking your dial lock? Have no fear, this guide will provide all the information you need to learn how to reset the combination of your dial lock. Before we go into detail on the reset process, let’s take a look at what actually constitutes a dial lock. What is a Dial Lock? A dial lock is a type of mechanical locking device. It consists of a circular dial with a set of printed numbers that you spin clockwise or counterclockwise to set a combination. It is commonly used as a secure means of accessing certain areas or securing items that need to be kept safe. This type of locks is becoming popular due to its relatively low cost and the convenience of operating it without any tools or keys. Steps to Reset the Combination on a Dial Lock Resetting a dial lock’s combination is not difficult when you know the correct steps. Here is what you need to do: 1. Use the key, if available, to open the lock. 2.Once the lock is open, rotate the knob clockwise and then counter-clockwise two or three turns. 3.Find the reset/change lever usually located on the back of the lock. Press down on the reset lever and turn the dial clockwise and counterclockwise. 4.Set a new combination and press the change lever again to exit. 5.Turn the knob clockwise to check if the new combination is working. 6. Open the lock and check the knob if it’s moving freely. Conclusion Resetting the combination on a dial lock is straightforward when you have the correct steps. Make sure to double-check if the combination is working before exiting the reset process and store the combination in a safe place. If these steps don’t work for you, you may need to contact a professional locksmith. The post How to Reset the Combination on a Dial Lock appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition-9/ How to Remove a Broken Key from a Car Ignition If you find yourself in the unfortunate situation of a broken key in your car’s ignition, don’t stress. With a few simple tools and a little bit of know-how, you’ll be able to get that broken key out quickly and safely. Removing a Broken Key from a Car Ignition: Step by Step Gather your supplies: You’ll need a pair of needle-nose pliers or tweezers, a flathead screwdriver, a small flashlight, and some lubricating oil. Identify the broken key: Shine your flashlight in the ignition and take a look. If you can’t identify the broken pieces, use the needle-nose pliers or tweezers to carefully pull them out. Try to remove the key: Using the flathead screwdriver, very carefully try to wiggle the broken key out. If it’s stubborn or stuck, add a few drops of lubricating oil to the keyhole and try again. Extract any remaining pieces: Once you have the bulk of the broken key out, use the tweezers to pick out any small pieces that remain. Get a replacement key: If possible, locate a replacement car key and make sure it fits the ignition. Things to Keep in Mind Removing a broken key from a car ignition can be a tricky process, but with the right tools and a bit of patience, it can be done. It is important to take your time and be as gentle and careful as possible to avoid any additional damage. If you are uncertain about the process or if the steps don’t seem to be working, it might be best to call a professional locksmith to handle the job. Keep in mind that even after removing the broken key, it is likely that the ignition will need to be repaired or replaced in order to restore full functionality. A locksmith can diagnose the issue and come up with the best solution for your car. The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition-8/ How to Remove a Broken Key from a Car Ignition Having a broken key in your car’s ignition can be a real headache. You can’t start the car and may even have difficulty getting the broken key out. Before you worry too much, know that this is a problem that you can fix yourself. All you’ll need is a few simple tools and a little bit of patience. Materials Needed Locking pliers Small hammer Needle-nose pliers Wire cutters Safety glasses Instructions The first step to removing a broken key is to take a pair of locking pliers and attempt to grip and pull the broken key out. This may take a few attempts, so don’t get discouraged if it doesn’t work the first time. If the pliers don’t work, move on to step two. Insert the tip of the needle-nose pliers into the key slot. Gently apply pressure in an upward motion. This should help to loosen the broken key. Once you have the key loose, grab onto the broken end with the pliers. Gently pull the broken key straight out of the key slot. If the broken key still won’t budge, you may need to resort to more drastic measures. Take a hammer and tap the shaft of the broken key. This should cause the shaft to vibrate, and may break it loose from the ignition. Once the key shaft is free, use a pair of wire cutters to clip off the remaining pieces of the broken key. Before you try to start the car again, it is important to double check that all of the pieces of the broken key have been removed from the ignition. You can do this by using a small flashlight to inspect the area. Safety Tips Always be sure to wear safety glasses when performing this task, to protect your eyes from any small fragments of the broken key. Don’t apply too much pressure when using pliers, as it may damage the car’s ignition. If at any point you feel uncomfortable performing this task, it is best to stop and contact an automotive locksmith. Now that you know how to remove a broken key from a car’s ignition, you can confidently repair the problem without too much hassle. With a few tools, a bit of patience, and following the instructions provided above, you’ll be able to get your car up and running again in no time. Good luck! The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Upgrade Your Homes Door Hardware for Increased Security

How to Upgrade Your Home’s Door Hardware for Increased Security https://www.cobbparkwaylocksmith.com/how-to-upgrade-your-homes-door-hardware-for-increased-security/ How to Upgrade Your Home’s Door Hardware for Increased Security The door hardware on your home is one of its most important security measures. Old, worn out, or broken door hardware can provide easy access for burglars or intruders. Upgrading your door hardware is an effective way to maintain the security of your home and prevent unwanted visitors. Here are some tips on how to upgrade your door hardware for increased security. Check Existing Hardware Before you start replacing your door hardware, inspect the hardware currently installed to determine if it is in good condition. Look for signs of wear and tear, broken or loose parts, and any other signs of damage. If any of these signs are present, it is best to replace the hardware altogether. Make sure to measure each piece of existing hardware accurately, so you can find the correct replacement. Choose High-Quality Locks When selecting new locks for your home, choose ones that are strong and durable. Look for locks that are made from solid materials such as steel or brass, and have a tamper-proof design. It is also important to choose licensed locks with Grade 1 or 2 ratings. These locks have been rigorously tested and will provide the best security for your home. Install Strike Plates Strike plates are steel plates attached to the door frame or jamb that reinforce the security of deadbolts and other locking mechanisms. This plate should be attached to the door jamb with 3-inch long screws for maximum security, and should be reinforced with an additional strike plate if needed. A strike plate can provide your home with a much higher level of security. Consider Smart Home Solution Today’s technology now gives you the option to upgrade your home’s door hardware with a smart home solution. Smart locks, for example, offer convenience and superior security. They can be accessed remotely from your smartphone or desktop, and allow you to control access to your home from anywhere. These locks can also be integrated with home security systems for added protection. Seek Professional Assistance To ensure that your home’s door hardware is properly installed and secure, it is best to seek professional assistance. A licensed locksmith or security expert can evaluate your home’s current security measures and recommend the best course of action for upgrading your door hardware. They can also provide reliable installation services that will keep your home safe and secure. Upgrading your home’s door hardware is an important part of maintaining its security. The tips above can help you choose the best locks, strike plates, and other components to protect your home from intruders. It is also important to seek professional assistance when upgrading your home’s door hardware, so any installation is done correctly and securely. The post How to Upgrade Your Home’s Door Hardware for Increased Security appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition-7/ How to Remove a Broken Key from a Car Ignition Losing a key to your car can be one of the most frustrating experiences for any car owner. However, if the key breaks inside the lock, the situation can be even more difficult to manage. In this article, we’ll discuss the best ways to remove a broken key from a car ignition so you can get back on the road as soon as possible. Step 1: Try Twisting the Key or Using Pliers to Extract the Broken Portion The first thing you should do when you notice a broken key in your car ignition is try to remove it with a pair of tweezers or needle-nose pliers. Gently twist and maneuver the remaining portion of the key to see if you can extract any larger pieces. If you are successful in this step, the remaining key will be easier to remove. Step 2: Use a Broken Key Extractor Kit If you are unable to remove the broken key with tweezers or pliers, you may want to consider a broken key extractor kit. This kit comes with a variety of different tools and attachments that can be used to reach the broken key pieces in the ignition and pull them out without damaging the lock or other parts of the car. These tools are available at your local hardware store or online. Step 3: Call a Professional Locksmith If the above methods do not work, you may need to call a professional locksmith for assistance. A locksmith will be able to accurately assess the situation and determine what tools and techniques to use to safely extract the broken key pieces from the ignition without damaging the lock or other parts of the car. Most locksmiths provide emergency services and can usually arrive within one hour. Conclusion No one wants to experience a broken key in their car’s ignition. However, with the right tools and knowledge you can usually get the pieces removed quickly and without too much hassle. If the key pieces cannot be removed with tweezers or a broken key extractor, contact a professional locksmith for help. Good luck! The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition-5/ How to Remove a Broken Key from a Car Ignition When dealing with an ignition lock that has a broken key, the most important task is to remove it safely without damaging the lock itself. Fortunately, this task is simpler than it may seem. Read on for a step-by-step guide on how to dislodge a broken key from an ignition lock. Tools You’ll Need Needle nose pliers Tweezers Flashlight Step 1: Inspect the Lock The first step is to inspect the ignition lock to determine the type of broken key that is lodged inside. If the broken key is a regular metal key, then you should be able to use needle nose pliers to get a grip on it. If the broken key is a newer plastic key, then tweezers may work better. Step 2: Insert the Tool Using the tool of your choice, insert the tip into the keyhole and gently tilt it so that the tool can grip onto the broken key. Apply a slight amount of pressure while firmly gripping the key with the tool. Step 3: Pull the Key Out Slowly and steadily pull the broken key out of the ignition lock. It is important to take your time and not pull too hard so as to not damage the lock. Step 4: Clean the Lock Once the broken key is out, use a rag and gently clean the inside of the ignition lock. It is likely that debris from the broken key will be lodged inside. Step 5: Insert a Working Key Once the lock has been cleared of debris, you can insert a working key and see if the ignition turns. If not, you may need to use a professional locksmith to get the lock to work. Conclusion Removing a broken key from a car ignition lock is a relatively simple process if you follow the steps outlined above. However, if you are unable to get the lock to work after removing the key, then it is best to consult a professional locksmith as more advanced techniques may be needed. The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition-6/ How to Remove a Broken Key from a Car Ignition At some point in time, you’ve probably encountered the predicament of having a car key break off in the ignition switch. This is an inconvenient and frustrating situation, but with a few steps and common tools, you can remove that broken key and be back on the road in no time. What You’ll Need: A pair of pliers A thin paperclip or wire Instructions: First, use the pliers to remove any visible remaining pieces of the key. If the key did not break off completely, make sure you remove the entire portion of the key. Once the remaining pieces of the key are removed, examine the ignitions switch to determine if there’s any metal left over in the keyhole. If there’s metal stuck inside, you will need to use either the paperclip or the wire to gently remove it. Reach into the keyhole with the paperclip or wire and try to feel for any pieces of metal. Once you find one, gently pull it out with the tool. Continue this process until you have removed all of the metal bits from the ignition. Using the light from your phone or a small flashlight, double check the keyhole for any remaining bits of metal. You may need to repeat the process until everything is removed. Now you’ll be able to insert a new key into the ignition and try to start the car. If the car won’t start, you may need to visit a mechanic or have the car towed in for further inspection. Tips: Be careful with the paperclip or wire, as you don’t want to scratch or damage the ignition switch. Don’t forget to examine the area around the ignition switch for any remaining pieces of the broken key. Make sure to take your new key to a locksmith to have it cut before attempting to start the car. By following these simple steps, you’ll be able to safely remove a broken key from the ignition of your car. Remember to take all necessary safety precautions and use caution when attempting this task. The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition-4/ How to Remove a Broken Key from a Car Ignition If you’ve ever broken a key in your car’s ignition, you know how stressful it can be to get it removed. Fortunately, there are a few simple things you can try to safely extract it yourself, so you don’t have to call a locksmith or take it to a mechanic. Step 1: Try Disengaging the Ignition Lock If you’ve already broken a key in your ignition, the first thing you’ll want to do is try and turn the ignition switch. You may be able to get the broken part out on its own this way. To do so, insert the remaining pieces of the key into the ignition cylinder and turn the ignition. If there’s any friction, you may not be able to turn it, and you’ll need to try some other methods. Step 2: Insert a Flathead Screwdriver If the previous step didn’t work, you can try using a flathead screwdriver as an alternative method. To do this, insert the screwdriver into the ignition cylinder where the key used to be and gently twist. It may take you a few tries before you’re able to turn it, but it should eventually disengage the lock. Step 3: Use a Key Extractor Tool If the two previous methods haven’t worked, you can try using a key extractor tool. This tool is specially designed to remove broken keys from an ignition cylinder, though some cars may require a different type of extractor. Insert the tool into the ignition lock cylinder, then gently rotate it in a clockwise motion. Once you’ve turned the tool far enough, you should be able to pull the broken key fragment out. Step 4: Consider Professional Assistance If none of the above methods have worked, your only option is to call a locksmith or take your car to a mechanic. They’ll have the proper tools and experience to safely remove the broken key fragment from your ignition. Removing a broken key from a car ignition is a tricky job, but it’s not impossible. As long as you’re careful and take your time, you’ll be able to successfully remove the broken key yourself. Remember, if none of these methods work for you, you can always call a professional for help. The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Install a Smart Lock on Your Front Door

How to Install a Smart Lock on Your Front Door https://www.cobbparkwaylocksmith.com/how-to-install-a-smart-lock-on-your-front-door/ How to Install a Smart Lock on Your Front Door Installing a smart lock on your front door opens up a world of convenience and security options. With a smart lock, you can unlock your door remotely, grant access to visitors without a key, and receive notifications when the door is opened or locked. There are several different types of locks available, and the installation process can vary depending on the lock you choose. Here’s how to install a smart lock on your front door. 1. Choose the Right Smart Lock Before getting started on the installation process, it’s important to make sure you have the right smart lock for your door. There are several different types of locks available, from simple PIN pad locks to more complex Zigbee locks. Consider your security needs and budget when choosing the right lock for your home. 2. Gather the Necessary Tools and Materials To install a smart lock, you’ll need some basic tools, such as a drill, screwdriver, and wire stripper. You’ll also need some materials, such as screws, washers, and mounting plates. It’s important to make sure you have all the necessary tools and materials before getting started on the installation. 3. Remove the Existing Lock Once you have the right tools and materials, you’re ready to start the installation process. The first step is to remove the existing lock from the door. This may require some disassembly, so if you’re unfamiliar with locks and locksmithing, it’s a good idea to consult a professional. 4. Install the New Lock Once the existing lock has been removed, you can begin installing the new lock. Start by attaching the mounting plate to the doorframe. Then, attach the bolt and lock itself to the frame using the screws and washers. Finally, secure the hinge plate to the door using the screws. 5. Connect the Smart Lock to Your Home Network At this stage, you’ve successfully installed the new smart lock on your door. The last step is to connect the device to your home network. This will allow you to control and monitor the lock from your smartphone or other device. Refer to the manufacturer’s instructions to complete this step. 6. Test and Enjoy! Now that you’ve installed your new smart lock, it’s time to give it a test run. Try unlocking and locking the door with your smartphone or other device, and check that all the features are working as expected. Once everything is working, you can enjoy the convenience and security of your new smart lock. The post How to Install a Smart Lock on Your Front Door appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Repair a Broken Keyless Entry Remote

How to Repair a Broken Keyless Entry Remote https://www.cobbparkwaylocksmith.com/how-to-repair-a-broken-keyless-entry-remote-2/ How to Repair a Broken Keyless Entry Remote Using a keyless entry remote is a convenient way to lock and unlock your car from a distance. If the remote stops working, however, your routine can be considerably disrupted. Fortunately, in many cases, a broken keyless entry remote can be repaired. Steps to Repair a Broken Keyless Entry Remote Determine the cause of the problem. The keyless entry remote may not be working because of a dead battery, corroded battery contacts, or an internal circuit failure. If you suspect a dying battery, remove the battery from the remote and replace it. Refer to the instruction manual for your keyless entry remote to identify the battery type. Clean any corrosion from the battery contacts with a cotton swab dampened with isopropyl alcohol. If replacing the battery did not resolve the issue, open the keyless entry remote and inspect it for any signs of physical damage. If you find any, contact the manufacturer for a replacement. If you have identified that there are no issues with batteries or physical damage, use a voltage tester to determine that all the pins on the remote’s circuit board are receiving power. Run an induction test with a watt meter to check for any short circuits in the remote’s circuitry. If there is a short on the circuit board, replace the circuit board. Tips for Repairing a Broken Keyless Entry Remote When replacing the battery, make sure to match the old battery’s type and voltage. If you don’t feel comfortable doing repairs on your own, consult with an auto locksmith or take your car to a dealership. Conclusion In many cases, if your keyless entry remote is not working, you can repair the problem yourself. While the steps for repairing a broken keyless entry remote can be complicated, following these recommendations can help. The post How to Repair a Broken Keyless Entry Remote appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Reset the Combination on a Dial Lock

How to Reset the Combination on a Dial Lock https://www.cobbparkwaylocksmith.com/how-to-reset-the-combination-on-a-dial-lock/ How to Reset The Combination on a Dial Lock If you have forgotten the combination of a dial lock or want to reset the combination, you can easily do so with basic household items. You can reset the combination on a dial lock without looking it up, without seeking help from a locksmith, and without having to buy a new lock. In this article, we’ll show you exactly how it’s done. Materials You Will Need A dial lock A thin metal shim A paperclip A pair of needle-nose pliers Step 1: Preparing the Lock To start off, open the dial lock by turning the dial from left to right. Once the dial is on the correct combination, the lock will open. Now, turn the dial counterclockwise until it clicks into the “reset” position. This position should be clearly marked on the lock’s body. Step 2: Insert the Shim Now, take the thin metal shim and insert it in between the dial and the body of the lock. It should fit snugly in place. Push it in until you hear a click, which indicates that the shim is properly inserted. The shim should now be firmly in place between the dial and the lock. Step 3: Reset the Combination Now that the shim is in place, you can reset the combination. Take the paperclip and bend it to create a small hook at one end. Insert the hooked end of the paper clip into the hole on the dial and rotate it until you hear three clicks. Move the hook to the next hole and repeat the process until you’ve completed all four holes. Step 4: Remove the Shim Once you’ve reset the combination, you can remove the shim. Take the needle-nose pliers and grasp the shim’s end. Carefully pull the shim out in one swift motion. Check the lock to make sure that it’s working properly and then store the shim away in a safe place. Conclusion You now know how to reset the combination on a dial lock. It’s quick, easy, and doesn’t require any special tools or knowledge. Once you understand the steps, resetting the combination on a dial lock should be a breeze. The post How to Reset the Combination on a Dial Lock appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition-3/ How to Remove a Broken Key from a Car Ignition Having a broken key stuck in the ignition of your car isn’t just frustranting and inconvenient, it can be a safety hazard if you’re unable to start the vehicle. Luckily, there are a few easy methods you can try to safely remove a broken key from an ignition. Before you begin, ensure that the car is turned off and unplug any power sources, such as a laptop or code reader. Method 1: Using Pliers Be sure to use needle-nose pliers for this technique to ensure the most precision. Insert the pliers into the ignition and gently grip the broken key stem. Gently twist the pliers to loosen the grip of the broken key on the ignition. Once loosened, slowly pull the broken key out. Method 2: Using a Key Extractor Tool This can be found at your local hardware store, as well as many auto-parts stores. Insert the key extractor tool into the ignition where the broken key is located. Using a small hammer, tap on the handle until the broken key starts to move. Continue tapping until the broken key can be fully removed. Conclusion Remember, always use caution when attempting to remove a broken key from your ignition. If you’re still unable to remove the broken key, it’s best to contact an experienced and qualified auto-locksmith for further assistance. The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Repair a Broken Keyless Entry Remote

How to Repair a Broken Keyless Entry Remote https://www.cobbparkwaylocksmith.com/how-to-repair-a-broken-keyless-entry-remote/ How to Repair a Broken Keyless Entry Remote Keyless entry remotes are widely used today on car doors to lock and unlock them without the use of a key. This is a great convenience, however it’s not a perfect system. Sometimes your keyless entry remote can become broken or malfunction, which means you’re unable to get into your car. Fortunately, there are some steps you can take to repair a broken keyless entry remote. Step 1: Check Batteries When a keyless entry remote stops working, the first thing you want to do is check the batteries. The remote probably uses a pair of AAA batteries, and over time they will wear out and need to be replaced. Remove the back cover from the remote and inspect the batteries. If they look corroded, that indicates the remote needs new batteries. Step 2: Reset the Remote Even after replacing the batteries, the remote may still not be functioning. If that is the case, then you’ll need to reset the remote. The exact reset procedure will depend on the car model, so it’s important to consult the user manual for the exact instructions. Typically, you’ll need to open the driver’s side door, press and hold the reset button, then close and open the door and press the reset button again. Step 3: Replace the Remote If resetting the remote didn’t work, then you may need to replace the remote altogether. Replacing a remote is often more expensive than just resetting it, but it’s sometimes necessary to get the job done. You’ll first need to determine the exact model of your car’s remote, and then purchase a replacement. Take the old remote to a locksmith or hardware store to ensure you get the right one. Conclusion A broken keyless entry can be a major inconvenience, but with a little bit of patience and effort it’s usually an easy fix. Start by checking the batteries, then resetting the remote if needed. If all else fails, you may need to purchase a new remote altogether. With these steps, you should be able to repair your keyless entry remote in no time. The post How to Repair a Broken Keyless Entry Remote appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition-2/ How to Remove a Broken Key from a Car Ignition It happens to every car owner at some point—you turn the key to start the car, and the key breaks off in the ignition. Now what? There’s no need to panic. Broken keys don’t have to be the end of the road for your car. What You’ll Need Flathead screwdriver Needle-nosed pliers Hair dryer Instructions Locate the Visible Part of the Key The first step in removing a broken key is to find the part that’s still inside the ignition. Depending on the type of car, you might need to remove a plastic cover above the key hole in order to access the broken pieces. Once you find them, you may be able to gently pull the pieces out with your fingers or needle-nosed pliers. Loosen the Lock Cylinder If the broken key pieces won’t come out, you’ll need to loosen the lock cylinder. Position your flathead screwdriver in the keyhole and turn clockwise. You may need to apply a lot of pressure in order to get the screwdriver to grip the cylinder. Keep turning until you get the cylinder to turn. You won’t be able to remove the cylinder completely, but this process should create enough room to grab onto any part of the broken key. Heat the Lock Cylinder In some cases, you’ll need to use some added heat to loosen the cylinder. Turn the hair dryer to its highest setting and point the nozzle towards the ignition. After a few seconds, the heat should expand the metal components enough to loosen the cylinder. If the car is newer, you may need to take extra care not to damage any of the electrical components. Pull Out the Broken Key Pieces Once you’ve loosened the lock cylinder, you should be able to pull out the broken pieces of the key with needle-nosed pliers. If you still can’t get the broken pieces out, you may need the help of a professional locksmith. Conclusion Breaking a key inside the ignition is no reason to panic. By following the steps outlined in this article, you can remove the broken pieces and get your car back in working order. If you’re still having difficulty removing the broken key pieces, then seek the assistance of a professional. The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Remove a Broken Key from a Car Ignition

How to Remove a Broken Key from a Car Ignition https://www.cobbparkwaylocksmith.com/how-to-remove-a-broken-key-from-a-car-ignition/ How to Remove a Broken Key from a Car Ignition If you have ever gotten your key stuck in an ignition, you know how frustrating it can be. Not being able to start your car is an inconvenience, but it is even worse if the key snaps off in the ignition. Removing a broken key from a car ignition requires some finesse, but with the right tools and a bit of patience it is doable. Tools Needed Hair dryer Needle-nose pliers Tweezers Lubricant Steps to Remove the Broken Key The first step is to heat the keyhole using a hair dryer. This will help soften the metal so that the broken key can be removed more easily. Keep the heat on the keyhole for about a minute. Next, you will need to use needle-nose pliers to try and grip the broken key. Insert the pliers into the keyhole and grip the broken key, then try to wiggle it out of the ignition. If this does not work, try using tweezers to grab the broken key. Insert the tweezers into the keyhole and grip the broken key as tightly as you can, then try to wiggle it out of the ignition. If this still does not work, you can try using a lubricant to help loosen the broken key. Apply a lubricant to the keyhole, then use the needle-nose pliers or tweezers to grip the broken key and try to wiggle it out of the ignition. Once the broken key is out, you can use it to create a new key. If the broken key is too damaged, you may need to contact a professional locksmith for help. Tips Be careful when using the needle-nose pliers or tweezers, as the metal in the keyhole may be sharp. Do not use too much force when attempting to remove the broken key as you may damage the keyhole. It may be helpful to have an experienced locksmith or mechanic look at the ignition to see if they can remove the broken key. Removing a broken key from a car ignition is a tricky task, but it is possible with some patience and the right tools. Be sure to follow these steps and use caution so that you do not cause any further damage to the ignition. If you are still having trouble removing the broken key, it is best to contact a professional for help. The post How to Remove a Broken Key from a Car Ignition appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

Fixing a Lock Key: Simple Steps to Replace It

Fixing a Lock Key: Simple Steps to Replace It https://www.cobbparkwaylocksmith.com/fixing-a-lock-key-simple-steps-to-replace-it/ Introducing a Simple Fix for Your Lock Key Troubles Maybe you’ve misplaced your key or it’s stopped working properly. If you’re the kind of person who likes to take matters into their own hands, then you can fix your lock key at home without too much difficulty. With some basic tools and a few minutes of your time, you’ll have a new lock key and be ready to go in no time! Preparing Yourself for the Lock Key Replacement Before you get started, make sure to gather a few items necessary for the replacement of your lock key: Lock key – You will need a new lock key to replace the old one. Screwdriver – A Phillips head screwdriver will work best. Pair of pliers – Have your pliers handy in case you need to remove any additional parts from the lock. Easily Replacing Your Lock Key Once you have all the tools you need, you’re ready to start replacing your lock key. Follow these simple steps to do it: Step 1: Use your screwdriver to remove the screws that hold the lock in place. Step 2: Carefully remove the lock and take out the old key. Step 3: Using your pliers, remove any additional parts from the lock. Step 4: Insert the new lock key into the hole. Make sure that it fits firmly. Step 5: Put the lock back in place and secure it using the screws. That’s a Wrap – Enjoy Your Lock Key Success Once the lock is securely in place and the key is intact, you are now ready to use the lock again. Congratulations on your successful replacement of the lock key! To sum up, replacing a lock key is not difficult with the right tools and a little patience. With a few simple steps, you can have a new lock key and be ready to go in no time. However, If you need an assistance, we at Cobb Parkway Locksmith are here to help you. Your Trusted Locksmith Experts in Marietta! Locked out of your home? Need to upgrade your business security? Look no further than Cobb Parkway Locksmith, the premier locksmith company serving Marietta and the surrounding areas. With our team of highly skilled and reliable locksmith professionals, we are dedicated to providing top-notch locksmith services tailored to meet your specific needs. The post Fixing a Lock Key: Simple Steps to Replace It appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/

[cobbparkwaylocksmith]

How to Avoid Locksmith Scams and Frauds

How to Avoid Locksmith Scams and Frauds https://www.cobbparkwaylocksmith.com/how-to-avoid-locksmith-scams-and-frauds-2/ How to Avoid Locksmith Scams and Frauds If you need a locksmith for any kind of key-related job, it’s important to know how to avoid scams and frauds in order to protect yourself and your property. Here are a few tips to help you stay safe when working with a locksmith. Be Picky First of all, it is important to research locksmiths in your area before hiring one. Look for reviews online and ask your friends and family for recommendations. Check for licensing, as well as any local or state laws or regulations regarding locksmith services. Check For Damage When a locksmith arrives to finish the job, inspect the door and lock to make sure there is no damage. Some locksmiths may search for weaknesses to exploit, such as an old lock or an easy-to-pick door handle. Be aware of any signs of tampering and alert the locksmith if you spot anything suspicious. Verify the Price Before getting work started, it is a good idea to get an exact price for the job. Locksmiths should be willing to provide you with an itemized list, as well as any estimates for additional work or services. Be wary of any locksmiths who won’t provide an accurate price or seem to be inflating their numbers. Payment When it comes to paying for services, it’s best to avoid cash. Paying with a credit card is a great way to track and record your transactions. If a locksmith refuses to accept payment through a credit card, be weary. Also, make sure to get a receipt or record of payment to help protect against overcharging or fraudulent charges. Conclusion By following these tips, you can help ensure that you are not scammed or taken advantage of by a dishonest locksmith. Do your research and verify prices before signing any contracts or handing over any money. Taking these extra steps will help you protect yourself in the long run. The post How to Avoid Locksmith Scams and Frauds appeared first on Cobbparkway Locksmith . via Cobbparkway Locksmith https://www.cobbparkwaylocksmith.com/