cathyxie33

[cathyxie33]

EPS Compactors Reduce the Pressure of Landfills

The amount of waste EPS is increased too soon that there is no enough space for EPS in landfills. The capacity of landfills is limited, but the amount of waste EPS is too large and occupies space extremely.

Landfill, composting, and incineration is common solutions to all problems associated with waste disposal. But all these methods can damage the environment and ecosystems. Incineration releases toxic gases and fine ash particles from the atmosphere. Traditional landfills began to produce leachate that seeped into groundwater, making it unfit for humans to use. To sum up, EPS recycling by EPS compactors can reduce the pressure of landfills.

Recognizing the dangers of poor EPS management, THE United Nations Environment Programme proposed sustainable goals, focusing on raising awareness of waste management and streamlining waste management systems in developing and less developed countries. Under this condition, more and more recycling company has invested in EPS recycling. Different from those companies, INTCO Recycling has researched EPS recycling for many years and has become an EPS recycling specialist that provides GREENMAX EPS recycling compactors. Customers can also get specially designed services in EPS compactors. Whatever, if humans want to live in a green-developed environment, EPS recycling is necessary!

[cathyxie33]

Why More and More Cities Have Setting Their Own EPS Recycling Sites?

If you have the habit of reading the news, you must have noticed that there are more and more cities that have set EPS recycling sites. But what’s the reason behind it? EPS recycling is universal to those recycling companies, but even many organizations and communities have begun to recycle waste EPS by themselves.

As we all know that EPS is a kind of material which is applied in many aspects of our lives—food containers, packaging materials… But except for the convenience, EPS also has brought too much potential danger and damage to us. EPS is made of chemicals derived from oil and natural gas. It is one of the main ingredients and may cause health hazards. But the problem is it’s hard for us to stop using EPS products immediately. After all, it plays an important role in our lives and is hard to be replaced easily. So, EPS recycling is the most sensible way.

With improving recycling awareness, there are more and more cities have begun EPS recycling. For example, Greensboro, a city of North Carolina, has set an EPS recycling site recently. It is aiming to reduce the contribution to their landfills and give waste EPS a second life. The collected EPS will be compressed into blocks by an EPS densifier. And they have cooperated with a manufacturer in New Jersey, which can make compressed blocks into photo frames and moldings. The fact will prove that Greensboro’s decision is correct. There are many EPS recycling companies now, but INTCO Recycling is the most special one. It provides a one-stop service on EPS recycling, including selling GREENMAX recycling machines, buying ingots and pellets, and producing renewable products such as photo frames. So if any city or organization, city want to conduct EPS recycling, why not consider INTCO Recycling?

[cathyxie33]

How does a polystyrene densifier deal with polystyrene?

Set an example as GREENMAX polystyrene densifier:

INTCO Recycling's environmentally friendly polystyrene densifier first crushes the foam, and then squeezes the foam through the screw conveying, so that the foam is melted in the screw, extruded through the discharge port, and formed. Like cold-pressing, it also reduces the volume and facilitates granulation.

The difficulty of the operating process:There is a process of volume reduction in the melting process. Therefore, during the melting process, ensure that the heating is uniform and the material is sent out in time to avoid excessive heat melting, which may cause blackening, discoloration, etc. of the material.

The Advantages of polystyrene densifier:

The operation is simple, just change the temperature; The density of materials after fusion is high, under normal circumstances, the bulk density can reach 500-60KG/M3. 

If you want to know more about polystyrene recycling, please click on INTCO Recycling.

[cathyxie33]

The Corporation of Styrofoam Recycling Makes Companies Win-win

As one of the largest logistics suppliers in the world, covering more than 170 countries and more than 1,200 service sites around the world, CEVA also has been troubled by the problem of too much Styrofoam packages.

CEVA's site in San Diego, California is mainly responsible for the distribution of household appliances. Every day, they distribute hundreds of household appliances to end customers in San Diego, which generates a large amount of EPS waste that needs to be disposed of. However, due to the limited space of CEVA's warehouse, they chose Riley to recycle and process styrofoam waste. And Riley recycling uses GREENMAX densifier machine M-C50, provided by INTCO Recycling, for processing. Proved by the fact that GREENMAX recycling machine helped deal with a large amount of Styrofoam. The ingots can also sold back to INTOC Recycling. So in the next several years, till now Riley insists corporating with INTCO Recycling and purchasing GREENMAX recycling machines. And Riley Recycling has decided to enlarge its company and set sites in other cities. 

By recycling Styrofoam, CEVA, Riley and INTCO have realized corporation and mutual benefits

[cathyxie33]

In Ontatio Two Cities Rebegin Polystyrene Recycling

The two cities, Brockton and Hanover, started collecting post-consumer polystyrene in 2007, but due to changes in the material market, the recycling plan was suspended after 10 years, the Foam Recycling Alliance reported in a press release. However, with the grant of 9,700 dollars from FRC, the recycling service will be resumed with the help of a polystyrene densifier, which compacts the collected materials into agglomerated polystyrene blocks. The end market then recycles the blocks into new products.

Companies and residents can carry polystyrene cups, takeaway containers, egg cartons and meat trays, as well as protective foam packaging. The material will then be sent to a central location for densification and made into new products such as crown moldings, picture frames or receipt spools. And according to a press release from the Bubble Recycling Alliance, plans have been made to provide bubble collection services to neighboring communities, which will provide services to more than 63,000 residents.

Whatever, polystyrene recycling is general and necessary. If your companies have too many polystyrene to deal with, please contact INTCO Recycling, a Polystyrene Recycling Specialist, providing a total solution to Styrofoam recycling.

[cathyxie33]

A recycling center in Coon Rapids, Minnesota has declared that it will increase its ability of ,managing, processing and recycling polystyrene foam. This grant of 50,000 dollars provided by the FRC,  which focuses exclusively on increased recycling of postconsumer polystyrene foam.

Recycling centers accept common household recyclables, e-waste, mattresses, and other materials. With a repaired concentrator and a new forklift, the center can expand its current polystyrene foam Recycling program to accept foam catering service packaging, cups, pallets, and other containers.

Colleen Sinclair, Coon Rapids' recycling coordinator, said that after the expansion of the recycling center, the recycling volume has increased significantly. But as the number increases, they need to scale up and find a solution to maintain existing equipment and handle additional polystyrene. By the way, INTCO Recycling is a good partner for recycling center. INTCO Recycling can recycle polystyrene and buy ingots, and also provides GREENMAX polystyrene compactor, which cuts polystyrene into small pieces and ingots.

[cathyxie33]

The EPS compactor model has been unanimously praised by home appliance manufacturers

The EPS compactor model has been unanimously praised by home appliance manufacturers. The rotating cutter can effectively crush different shapes of EPS packaging waste into foam, and then be pushed to the hydraulic plate by the cold-pressing screw, and finally produce a high-density and hard-texture EPS block. Compared with EPS packaging waste, EPS block can save a lot of storage space and improve transportation efficiency. It should be known that reducing the cost of warehousing and transportation can reduce the recycling cost of the entire EPS recycling. 

[cathyxie33]

GREENMAX Styrofoam densifier is a new designed semi-automated Styrofoam recycling system

GREENMAX Styrofoam densifier is a new designed semi-automated Styrofoam recycling system, the applicable materials include EPS, XPS, EPP, PE foam and PSP food trays." "More and more home appliance manufacturers provide on-site installation services. After installation, EPS packaging waste will also be taken away. This move brings customers a good experience service, but in addition, you know why the workers take away EPS packaging waste? The answer is because of an EPS compactor. EPS compactor A-C100, also known as EPS screw compactor, developed and manufactured by California GREENMAX.

[cathyxie33]

Styrofoam densifier is purchased for manufacturing photo frames

Because the recycled plastics market has broad prospects, GREENMAX is also purchasing it for manufacturing photo frames. Some retailers are very happy to cooperate with GREENMAX, use Styrofoam densifier to recycle Styrofoam packaging waste, sell it to GREENMAX to make photo frames, and then retailers sell the photo frames as merchandise again, which has truly realized a cycle. GREENMAX has always been committed to promoting Styrofoam recycling 

through the development of Styrofoam recycling equipment. We hope that Styrofoam recycling will be as well known as paper recycling." "In most roadside recycling programs, polystyrene is part of a long list of recycled contaminants (unrecyclable waste material, items cannot be placed in recycling bins). However, as long as it is separated from most of the waste, polystyrene is valuable for recycling. 

[cathyxie33]

The California-based Styrofoam recycling specialist-GREENMAX has developed a Styrofoam densifier

The California-based Styrofoam recycling specialist-GREENMAX has developed a Styrofoam densifier with a compression ratio of up to 90:1 in response to the high cost of Styrofoam recycling. Styrofoam densifier complete machine parts are provided by high-end parts manufacturers such as Siemens, Phoenix, NSK, etc., semi-automatic operation, a small number of workers can operate. Mainly adopts hot-melt technology, which realizes compression through three links: crushing, screw pushing, and heating coil heating. It can perfectly squeeze out the air content contained in Styrofoam, and finally produce Styrofoam ingot called recycled plastic. The focus of recycling is ""reuse"". Styrofoam ingot can be remanufactured into photo frames, hangers, stationery, park benches, and is the best material for imitating wood products.

[cathyxie33]

Styrofoam can become a hard ""wooden"" photo frame

"Perhaps you can hardly imagine that the soft Styrofoam can become a hard ""wooden"" photo frame, but this is a fact, it really can, after being compressed by the Styrofoam compactor. Not just photo frames, but also stationery, hangers, park benches, baseboards and other items. Styrofoam trash can be turned into these, because Styrofoam compactor is an important part of Styrofoam recycling. 

When you know that Styrofoam can be reuse after recycling, will you treat it as an abandoned resource? Styrofoam contains 98% of the air, so if you want to recycle it into a photo frame, this is the most problem to be solved. Styrofoam compactor is the recycling equipment developed by GREENMAX in order to solve this problem, mainly using the combination of crushing and hydraulic pressure. 

[cathyxie33]

A large part of recyclable plastics (mainly foam) entered the landfill and ocean

Not long ago, we cooperated with oiuytghsj-98yghjs a fish merchant through a Finnish equipment agent. The customer purchased a GREENMAX A-C200 EPS compactor, which is our medium-sized cold press, with a production capacity of 200kg per hour. GREENMAX always provides the appropriate model for our customers according to the amount of the EPS foam waste. The model A-C100 and A-C300 are also popular on the EPS recycling market.

 After using the machine for a period of time, we received feedback from our customers that they are satisfied with the machine. GREENMAX EPS compactor is worthy of promotion. We also have a special stainless steel discharging tank designed for wet foam fish boxes. GREENMAX is committed to becoming the leader in the EPS fish boxes recycling industry." 

 "Recently, Environment International magazine published a new study. With the strengthening of people's awareness of environmental protection, more and more recycling projects are widely used, but research shows that tracing downstream of these recycling projects found that a large part of recyclable plastics (mainly foam) entered the landfill and ocean. 

[cathyxie33]

A set of GREENMAX M-C100 Styrofoam densifier was placed in its Return Center in South Carolina

"Here is a good news! GREENMAX has cooperated with Wal-Mart, the world's largest retail chain, for its Styrofoam recycling project. A set of GREENMAX M-C100 Styrofoam densifier was placed in its Return Center in South Carolina. This will be a breakthrough for GREENMAX in Wal-Mart, as well as other large retail store industries. In fact, retail stores are an important gathering place for Styrofoam packaging materials. 

Retail stores involve many delicate and fragile goods and electronic appliances. Styrofoam packaging is essential in the process of purchasing and selling such items. For example, large retail chains like Wal-Mart have its own Return Centers to handle Styrofoam packaging and other waste materials. Other retail stores, such as electrical appliances retail, and department store retail stores like Wal-Mart must also have Styrofoam processing needs. Where did their Styrofoam waste go? What is the oiuytghsj-98yghjs value of waste Styrofoam after recycling? 

[cathyxie33]

GREENMAX is committed to helping more companies to promote EPS recycling business on a global scale

At current stage we hope tackle some pending issues in this area, but we haven‘t fully understood current situation and issues in recyclable waste management. So we would like to listen precious voice from leading company in this area. I heard that your company has various activities for recycling of PS and some experience in Singapore as well. said the project manager. As a professional EPS recycling machine supplier and EPS recycling specialist, GREENMAX is very pleased to receive such project consultation. 

At the same time, GREENMAX is also committed to helping more companies to promote EPS recycling business on a global scale. GREENMAX offers different types of EPS recycling machine according to the customer’s requirements. The company accepts customization and provides a one-year warranty. GREENMAX EPS compactor and foam densifier have a certain reputation in the world EPS recycling industry. GREENMAX will spare no effort in assisting customers oiuytghsj-98yghjs to carry out EPS recycling projects, providing professional EPS recycling machine and technical support, our goal is to increase the global EPS recycling rate." "In the latest paper published in ""Science"" magazine, data shows that by 2040, the amount of waste polluting the ocean will increase to 29 million tons per year, and we are being inundated with waste. 

Upgrading of the solid waste management system is imminent. Not only does the government need to make changes, but there are also many measures that must be completed by enterprises. If costs and incentives are taken into account, recycling is the best choice, especially the use of EPS compactor for recycling.

[cathyxie33]

Bosch would like to expend their expertise to recyclable waste management

Bosch, the manufacturing and technology supplier in area of automotive and industrial business has great interest in EPS recycling. This company has known the brand of GREENMAX from an EPS manufacturer, and learned from our website that we are the leading company in the EPS recycling industry, so they decided to consult us about the EPS recycling project. Bosch would like to expend their expertise to new fields such as recyclable waste management by using new sensing tech and robotic solution. 

[cathyxie33]

INTCO Recycling devoted  to the research and design of Styrofoam densifier

These realities have made INTCO recycling determined to do something for the recycling industry, and the brand GREENMAX has emerged as the times require. GREENMAX devoted himself to the research and design of Styrofoam densifier based on cold-compress technology so that these inevitable practical problems have been solved. Successful Cooperation with Famous Logistics Companies in California Premier product management is a California-based logistics company. 

 As one of GE's contractors, it has been in operation for 13 years. It is mainly responsible for the transportation of household appliances, such as refrigerators, washing machines, and other household appliances.? Due to the difficulties of Styrofoam management, Premier has been looking for a recycling solution for Styrofoam. 

The timely arrival of GREENMAX Styrofoam compactor A-C100 enables them to solve the trouble of Styrofoam management that has plagued them for many years. This successful cooperation has obviously given a shot in the arm to the logistics industry in the United States.

[cathyxie33]

INTCO Recycling has designed a complete set of Styrofoam recycling solutions

While other companies are still struggling with how to deal with Styrofoam, INTCO Recycling has designed a complete set of solutions. It is believed that in the future, the US logistics industry will be closely linked with the Styrofoam compactor." "The furniture industry is ushering in a new breakthrough development opportunity because of covid-19, so the furniture packaging made of Styrofoam has become the existence that cannot be ignored in waste logistics. More recycling centers realize that it's time to pay more attention to Styrofoam , and Montclair recycling center is one to respond. It will hold Styrofoam recycling days in June and July. Residents can collect and donate clean Styrofoam furniture packaging at the recycling center, 219 N. Fullerton Ave at that time. Styrofoam compactor will play an important role in this recycling activity.