begrudginglybehooved

[begrudginglybehooved]

What To Know About Rerouting a Water Shutoff Valve

When you need to turn off the water, where does the valve do that? Moving it to a location where it will be more effectively used may prevent flooding problems and make repairs more straightforward.

Turning off the water supply is a condition for doing many routine plumbing repairs around the home, such as mending a dripping faucet, changing outside fixtures, or installing sprinkler systems. You have a problem if the shutdown valve is difficult to reach, or even worse, if you have no idea where it is located. If a plumber has to squeeze into a crawl space just 24 inches wide to discover it, he or she will not be thrilled and may even tack on an additional price.

Before she had to repair the leaky angle stop on her toilet, my friend Rhonda, who lives in San Rafael, California, never gave her cutoff valve any attention until she was faced with fixing it. Since she could not locate the main valve, she concluded that she did not own one and would need to turn off the water on the street.

She would need to buy a specialized instrument to do it, and the street valve itself was jammed. In the end, she dialed the number for the municipal water department and waited for the personnel to come for five days. By that point, the amount of water in her bathroom had risen to the point where a new floor covering was necessary.

Changing the location of the main water cutoff in your house is not difficult. It is unnecessary to remove the old valve, which you can just leave open and forget about in this case. You may turn off the water using the old valve, enabling you to install the new valve without any problems.

What Exactly Is It That a Water Shutoff Valve Does?

A water shutoff valve is used to halt the flow of water. Some homes have more than one, and each of them controls a different portion of the plumbing system, such as the kitchen or a single bathroom. Both the faucets and the toilets have their very own. The plumbing law mandates the installation of the main valve that may shut off the water supply to the whole home, including the fixtures and sprinklers located outside.

Typically, a gate or ball valve measuring 3/4 inches in diameter and mounted on the main cold water line serves as the primary cutoff. To cut off water flow, gate valves resemble garden spigots and have spoked handles that need to be cranked many times. Levers on ball valves can only turn through a complete circle of 90 degrees. The handles are sometimes either red or blue. If you have an older model, it's possible the surface hasn't been painted, making it more difficult to locate.

When there is more than one shutdown valve in a house, the main one most often has the same appearance as the branch valves. It's positioning, which is usually near the point where the main water line measuring 3/4 inches enters the home, is the aspect that most distinguishes it from other similar devices. In most cases, the primary water line emerges from the earth below.

If the home does not have a basement, the main valve is often located in the crawl space, slightly above ground level. Typically, this is because the plumbers roughing in the water pipes found it handy.

Changing the Location of a Water Shutoff Valve for several Reasons

Accessibility should be your first concern while considering alternative routes for your main water shutdown. This should be done for a few significant reasons, including the following:

Access to the valve may be simplified by moving it from outside the crawl area inside the laundry room, where it will be more conveniently located. Locating and using a shutdown valve that is easily accessible is more straightforward. In this manner, you will be able to save money on plumbing bills by doing simple plumbing jobs such as repairing leaks on your own.

In the case of a significant leak or a natural catastrophe, you can save your home from suffering expensive water damage if you can swiftly and simply turn off the water supply.

You may avoid the risk of your pipes breaking due to freezing and thawing while you are away from home during the winter by turning off the water and draining the system before leaving on vacation.

Installation Via Bypass Loop Or Direct Installation

The installation of a new cutoff valve often does not require the installation of new plumbing pipes. Simply cut the pipe above the floor, then install a replacement valve if the main water line enters the building via the floor and the cutoff is below the floor.

If your water meter and cutoff valve are hidden in a box buried in the yard, all you need to do is locate the point where the pipe enters the home and then follow it to the location of the water heater. The main cutoff should normally be installed at a position immediately before the main line splits into hot and cold (often right before the water heater) since this is generally considered to be an ideal location.

In situations where the plumbing arrangement does not provide for the accessible location of the shutdown valve, you may decide to build a bypass loop that may be constructed out of a plumbing pipe by either yourself or a plumber.

The valve may be moved to a more convenient location by removing a part of the main supply line and replacing it with a pipe loop. This can be done in the bathroom or the laundry room to make it easier to access. When you remove a part of a pipe, the water will no longer flow through that section but instead through the loop. And the valve, which is often located at the very top of the loop, can turn it off.

Copper or CPVC pipe may be used to build a bypass loop, but PEX pipe simplifies the process. After soldering or gluing necessary adapters to the existing pipe, the next step is to snap on flexible PEX tubing and route it behind walls or under floors to where the valve is needed. If the diameter of the PEX pipe being installed matches the diameter of the pipe being replaced, the water pressure should not be altered.

[begrudginglybehooved]

5 Best Career for Chief Journalism Officers in 2023

Who made up the rule that having a degree in journalism is required to work as a journalist? A degree in journalism opens up a wide variety of additional doors for its holders. You may be thinking about getting a degree in journalism. You may be curious about how you might advance your career in media. If that is the case, you have found the proper place to be. If you choose to major in journalism, you will hone your writing and communication abilities, both of which are transferable to a wide range of careers. If you have a degree in journalism and are currently seeking work, you might think about utilizing Teal's Job Tracker to organize and manage your job hunt. You will not have to pay anything to use Teal's job search site, and it will speed up the process of finding work for you. The following are some of the most rewarding occupations available to journalism majors:

# 1. content writer

You may simply try your hand at creating content if you have a degree in journalism. It is vital, and you may even do the task from a distant location. You have a lot of responsibilities as a content writer, including coming up with ideas for blog entries, social media postings, articles, and more! You may get knowledge about content strategy if you work as a content writer. You get the opportunity to collaborate with the head of marketing at the firm and participate in crucial branding meetings. You are required to have the ability to follow the fundamental standards. At first, you have experience at the entry-level, but as time goes on, you may earn more thanks to your growing talents and knowledge. You need to be able to work under very tight time constraints. Freelancing is an option for those who have skills as content writers. The median wage for a content writer in the United States is $18.52 per hour (as of November 2021).

# 2. Staff Secretary

If you have a degree in journalism, another career option open to you is that of a staff writer. You will generate material for news stories, feature pieces, reviews, and other types of writing if you are hired as a staff writer. You should engage in collaborative efforts with many other experts, including editors, content strategists, and other authors. This may be an office job. A bachelor's degree may help you open doors to new possibilities, but a master's degree can help you develop more advanced skills and provide you access to additional options. In the United States, a full-time writer can expect to earn a basic pay of $42,781 per year on average (as of November 2021).

# 3. copywriting

If you have a degree in journalism, you can also consider trying your hand at copywriting. This is a fascinating region that you could take pleasure in exploring. You also need to be well-versed in the art of persuasion if you want to be a copywriter. You can communicate effectively with prospective audiences as a result of the communication talents you possess. Blogs, emails, brochures, advertising campaigns, and other types of writing are all within your scope of competence. In the United States, the annual base wage for a copywriter averages out to be 52,148 dollars. Keep in mind that one of your responsibilities as a copywriter is to meet stringent deadlines! You also need to be innovative and have a solid grasp of the lingo that will be used by your target customers.

# 4. Freelance writer

Even with a bachelor's degree in journalism, it is feasible to work as a freelance writer in this day and age because of advancements in information technology. You may simply bring in money without having to leave the convenience of your own house. You may start a blog in addition to developing a website for your writing. You have the opportunity to work for a variety of firms! Your work can be motivational and perhaps can alter the course of history. You may learn to create press releases as well as other types of writing. An hourly rate of $ 23.42 is considered to be the standard minimum pay for a freelance writer in the United States. You have the option to work from home, but there are very stringent time limits. Being on time is essential if you want to be successful as a freelance writer.

# 5. reporter

You may enter the field of journalism if you have a degree in the subject. Reporters are responsible for compiling news reports for publication in either internet or print media. You may work in television reporting. You will need to do research, construct a narrative based on what you know, and conduct interviews with other individuals. You may even come across fascinating tales that you may share with the globe.

The median hourly wage for reporters and editors working in the media industry in the United States is $50.03.

Conclusion

Your ability to lead in journalism will offer up opportunities for you. You may work in social media management or as a blogger, for example. There is a wide variety of choices available. People are flocking to YouTube and other contemporary means of making money; you may give it a go too!