#Orbi Router Magenta Light

[orbisetupnetwork]

Solutions for the Orbi Satellite Not Connecting Problem

Your WiFi speed goes to the next level with a Netgear Orbi. It's perfect for big homes and offices with many wifi-dependent devices and people. But what happens if an Orbi satellite can't connect to the router?

If that happens, you must ensure your Orbi satellite is set up correctly. Also, check to see if the satellite or router hardware is broken, the device sync failed, or the firmware update failed. Or your device might not be connected to a power source.

Here's everything you need to know about your Orbi to understand it better. From why your orbi satellite not connecting to how to fix the problem. Let's go!

What is mesh wifi?

Your Netgear Orbi is a tri-band mesh wifi that works over the air. It's a wireless system that sends signals to all parts of the house at the same time.

Orbi mesh networks work when the router is connected to the modem so that it can connect to the internet. Then satellites connect to the router and work as wifi range extenders.

The Orbi satellites send out the same network as the router, which makes the signal stronger. So whether you're in the living room or the kitchen, as long as there are satellites nearby, you should have a stable connection.

Why can't I connect my Orbi satellite to the router?

Mesh wifi is a wireless system, as we already said. So the router and the satellites talk to each other through wifi.

For satellites to send out signals, they need to be able to talk to the router well. So, if your satellite isn't communicating, something must get in the way.

Try the following tips and steps before calling Netgear tech support.

Fixing your Orbi satellite Not connected to a source of power.

If your orbi not connecting to satellite, the wifi connection in your area will be slower. So, here's what you'll need to check on and fix your Orbi satellite:

First, check to see if your satellite has power or is connected to a power source. Pull the power cable out of the wall outlet. Then, plug it back in and see if the satellite's LED light is on.

If the LED light is on, try to reconnect the satellite to the router. If that didn't work, move on to the next step.

Set up your Orbi Satellite.

When the satellite isn't set up right, this problem can happen. Something could have gone wrong when it was being set up or cut off.

Use the Orbi app to try to set up your satellite, and it should be ready to go. Try the next step if nothing changes.

Put the satellite in the right place.

Keep your satellite three to four feet off the ground. Take it out of corners, aquariums, mirrors, microwaves, and other radio frequency devices. This makes it harder for the router and the satellite to send and receive signals and talk to each other.

Look for broken satellite parts.

Check to see if the satellite is broken in any way that could affect how well it works. If your device is broken, contact Netgear's customer service immediately.

Check for broken parts in the router.

Check your router to see if the satellite is not broken. If your router is broken, you might need to buy a new one.

The router and satellite are not in sync.

The router and satellite are not in sync if your satellite has a purple or magenta light. Or the connection could be blocked. Check the position of your satellite

The update of the firmware failed.

Something must have gone wrong with the update, or it must have been stopped.

If you did all these things, your satellite would be fine now. But if none worked, you might want to call Netgear's technical support.

1. Make sure it makes sense.

How to connect a router and a satellite

Have you set up your Orbi router to work with an Orbi satellite? This is the main lead that gives you trouble, and it gives them trouble, too. If you've connected the router to a strong, compatible satellite, this isn't the problem that's giving you trouble with syncing.

SOLUTIONS: Some people go too far and deal with strange problems. Check how many devices can connect to the router and only connect that many

2. Get the timing right Users don't follow the proper steps for syncing when they face the orbi satellites not connecting issue, so they have to figure out what's wrong. That's fine, just make sure to follow the steps correctly.

You need to follow the simplest of the most recent steps. You need to put the router and the satellite in the same room. You need to know where the satellite is during the router sync process.

Then, plug the satellite into a power source and turn it on.

If the power LED on the back of the satellite is not lit up, press the Power on/off button. You need to wait until the light at the bottom of the satellite turns solid white.

Press the sync button on the Orbi router, and then press the sync button on the satellite at least two minutes later.

The satellite goes outside and hooks up the power outlet to the satellite. Don't worry if you can't understand because our experts will always help you.

If the device has a blue light, it is perfectly synced. There is a very good link between the satellite and the Orbi router.

If the light looks like magnets, the Orbi router hasn't been able to sync. Move the satellite close to the router and try these steps again.

3. Start up the Orbi

If the problem is still giving you trouble, try to fix it by restarting your device. The best and smartest way to deal with problems is to start over. Please make sure to turn off the Internet before you restart.

In conclusion

Netgear Orbi is a home wifi system that works so well. Aside from having a signal that covers a large area, it makes browsing the web and streaming videos quick and easy. 

If none of the suggestions worked for netgear orbi satellite not connecting problem, you should get help from Netgear's tech support or visit orbilogin.com

[loginorbi]

Orbi purple light fix or magenta LED on Orbi router

Seeing Orbi flashing purple light or magenta LED on Orbi router. It may indicates that orbi does not connected to satellite. Or Orbi won’t sync properly. results in blinking pink or purple light on Orbi router. 

Find the reasons which causes beeping purple light on orbi. Read more to know causes or troubleshooting steps to Orbi purple light fix. 

[orbilogin01]

How do you fix the orbi purple light issue?

There are a number of reasons due to which you are facing orbi router purple light issues. However, resolving the orbi router purple light issue is not a tough task. You can try some of the troubleshooting methods given in this guide. Check out our guide and learn how to fix orbi router flashing purple light issue.

https://www.orbilog-in.com/troubleshooting/magenta-led-purple-light-on-orbi/

[orbilogiinn]

Orblilogin.com Login |Orbilogin.net | Orbi Router Login and Setup

In step with the Netgear Orbi setup guide, you should first collect all of the required factors for setting up Orbi router and satellite. These consist of the Netgear Orbi router, satellite, Ethernet cable, a laptop/computer or a device capable of wireless connection. The following steps to setup Orbi are:

The very first thing to do is to connect your Orbi router to the internet. For this, turn off your modem and take out its battery, If it runs on one.

Connect it to a power source and turn ON it back once more.

Utilizing an Ethernet cable, join the LAN port of the modem to the internet or Yellow port of the Orbi router.

To the Netgear Orbi setup system, plug it in to a power supply and switch it on.

NOTE: Check the power LED present on the backside of the Orbi router. If it does not light, activate the router using On/Off button.

The Orbi router will have an LED in order to first turn solid white after which pulse white.

Make sure that you’ve positioned the Orbi central device in the center of the house to make sure maximum reach ability to other devices as well.

Power up the Orbi satellite via attaching it to a power source.

NOTE: Notice the status of light on the backside of the Orbi satellite. If it doesn’t remove light up, press the on/off button available and check the status once more.

During the Orbi setup system the Orbi satellite’s ring LED will flip to the next colors: first solid white, it will then pulse white, and finally pulse magenta color.

NOTE: The magenta color will pulse from the Netgear Orbi router for up to a couple of minutes, mentioning that it is attempting to locate Orbi router and attempting to connect with it.

Once the Orbi satellite discontinue pulsing magenta color, it’s going to turn to one of the following colors for around 10 seconds earlier than the LED absolutely turns off. Each and every of those lights state once of the next messages:

Solid Blue: This color implies that the connection between the satellite and the router is successfully accomplished.

Solid Magenta: If the Orbi satellite can not connect with the Orbi router. It is going to stay magenta. In this case, attempt to place the Orbi satellite closer to the Orbi router.

Solid Amber: The Orbi satellite turns this color to state that the connection between the router and the satellite is normal. Try to keep the Orbi satellite close to router.

Use an Ethernet or a wireless connection to connect with a laptop or a computer to complete the Netgear Orbi login procedure.

NOTE: wireless connection can be accomplished utilizing the WiFi network name (SSID) and Orbi default wifi password which is printed on the back of the Orbi router or satellite. Connect to that network making use of your WiFi-enabled PC or mobile.

[jasminetaneja1-blog]

How Does the Netgear Orbi Work? Methods to Connect My Netgear Orbi router & How to Secure it

In today’s era, everybody is connected to the internet in different ways. We all need internet connectivity throughout the day for different purposes that may be used for streaming various devices, for video calling or completing office tasks and many more. It has become the need for the hour. For a better internet network, it is essential to have a fast, a reliable and secure wifi connection that is made available by the different types of routers. Here in this article, we will discuss

Netgear Orbi router

and other advanced techniques and methods to get connected with internet to enjoy uninterrupted browsing experience by

installing Netgear Orbi

.

A Stepwise Guide for

Netgear Orbi Setup

In the first section of the article, let’s discuss how to perform

Netgear Orbi setup.

You have to follow some simple steps and you are all set to go. Check out following steps for the setup process.

In the very step, take out the router and get ready to set up the Netgear Orbi router.

Take out the plug for the modem and remove and replace the battery backup if you use any.

Locate the router in the central location in your home or office for a better internet connection.

Plug-in the modem again.

Connect your modem with the yellow internet port of Orbi router with the help of an Ethernet cable.

Join the plug of the router with the power supply and turn it ON.

Wait for a few seconds until the LED light of the router turns white to the pulse white.

Connect the Orbi satellite with the power source.

Wait until the LED light turns pulse white then pulse magenta.

After this, the router will reboot automatically.

You can easily connect the router with any preferred device like a computer laptop or mobile phone via a wired or wifi connection.

The users can utilize the mobile app to manage the settings for Orbi setup.

When you notice the LED light turn off, it means you have completed the setup process successfully.

Can I connect Orbi to existing router?

Can Orbi connect to Nighthawk?

How do I access my Orbi router settings?

Steps to Follow for

Netgear Orbi Login

Once you have configured the Orbi router, you are ready to proceed with the login process.

Browse Orbilogin.net on your web address bar, it will redirect on the login page.

The next step is to enter the user name & password. You can get these credentials in your manual guide. Make sure that user name & password are case sensitive.

Most of the times, the default user name and password are ‘Admin’.

In the next step, you have to press ‘Enter’ for completing the login process.

Once you have log in successfully, you can customize the settings as per your requirements.

Click on the ‘Next’ button to move ahead. Tick the checkbox to agree to the terms and conditions.

Click on the ‘Next’.

Once you will get the internet connectivity message, move towards select ‘Setup Orbi Satellite’.

It will recognize the satellite unit and ask you to initiate the setup process.

In case if you face any problem with the Netgear Orbi login then you need to follow some guidelines, which are given below:

Make sure that all the cables are connected to your Orbi router if you are using a wired connection.  

Make sure that a proper connection is established between the Orbi router and the connected device.

Mistyping of the words and spellings may lead you to another page.

Also, ensure that your browser cookies & cache memories are deleted before login.

Also, check that you are using an updated version of the browser to avoid any issue in the login process.

Methods to Connect My Netgear Orbi With Internet

There are two methods to connect Orbi router with the internet. One is a wired connection with the help of an Ethernet or USB cable and another one is a wireless connection through wifi. Let us talk about both the processes in detail.

Can I connect Orbi to existing router?

Can Orbi connect to Nighthawk?

How do I access my Orbi router settings?

read more...

[netgearorbiloginsblog]

How to troubleshoot Orbi Satellite showing solid magenta color?

Orbi satellite is a little device from Netgear. It is very handy to use. A high-speed internet connection is the need of the hour.

Orbi Satellite Solid Magenta Light

As a matter of fact, the light of this kind is not something that should be taken seriously. You can fix this issue on your own if you read this article carefully. You will then be able to do Orbi login. This article explains very effectively how to tackle this issue. You are not a techie? No issues. Just read this article that explains each step in a very simple and effective manner. So let’s get started.

Restart the satellite and router

The light you are seeing means that your internet connection is weak. It may also point toward a minor bug in the router’s system or the satellite. But there is good news. These issues can be easily resolved. So no worries! Get ready for Orbi login.

Well, restart happens to be a good way to remove bugs and glitches. So there is no need for anything complex. We are going to start from there itself. So go ahead and run a power cycle on satellites as well as routers.

Once you are done away with that, just check whether everything is working fine.

2. Check all the connections

Orbi login is now not far away. Make sure all your connections are very proper and solid.

Do you have a router and the satellite is connected using a cable? If you have, you will need to make sure that this connection is as tight as it can possibly be. The connection should be as tight to the maximum.

Also, take care of the fact that the cables should not be damaged. If there are damages, replace the cables immediately.

You can also clean the cables if there is dust accumulated on them.

3. Contact your Internet Service Provider

Call your Internet Service Provider if there are any service issues.

[orbiapplogins]

If the distance between orbi satellite and orbi router is a lot, the device will fail to connect with each other. Try to shorten the distance between the devices to fix the “orbi satellite not connecting” issue. If reducing the distance failed to fix the issue, you must reset the orbi satellite. Use a paper clip to press the reset button located on the back of the Orbi device until the LED flashes white. This will reset the orbi satellite. Now, you can attempt to sync the Orbi satellite to the router once again. 

Wondering why orbi satellite is not connecting to the router? The possible reason could be that you have not pressed the SYNC button one one of the devices. Therefore, ensure that the Orbi devices are plugged into the power source and placed in the same room. Press the “SYNC” button on the Orbi satellite and press the ‘SYNC’ button on the Orbi router within the two minutes. If you see solid blue light on the ring LED of the Orbi satellite it means it is connected to the Orbi router.  If you see magenta light, reduce the distance between orbi satellite and the router.

[oorbilogin]

Netgear Orbi Wi-Fi system is used to extend the existing wireless network speed with orbilogin.com or http://orbilogin.com login. Orbi Wi-Fi system helps you to get rid of boosters and extenders. It comes with Orbi router a satellite. First set up Orbi Wii-Fi system with Netgear Orbi domain.

To setup Orbi router and Orbi satellite first unplug the modem.

And plug in the modem again.

Using Ethernet cable of your Orbi router connect your modem with yellow internet port.

After that connect Netgear Orbi login router to the power plug. Note:Press on/off button of your orbilogin.com router device. Power LED light will on.

You have to wait till the LED light of Netgear Orbi router will become solid white and then pulse white.

For better WiFi network coverage please place your Netgear Orbi satellite nearer to the device where the signal would be in good strength.

Now connect your Netgear Orbi satellite with a power plug. Note: if the power LED on the backside of Netgear Orbi satellite does not show. Then press the power on/off button.

After connecting with the power source the Orbi satellite ring LED light might solid white, then pulse white and then magenta color. Note: Orbi satellite LED might pulse Magenta color it indicates that Orbi satellite attempts to sync with the Netgear Orbi login.

When the Netgear Orbi Satellite ring LED shows the magenta color, after that, it lights the following color for 10 to 12 second and after that, it turns off last.

Following colors will appear on Netgear orbi router:

Solid blue: It shows that the connection to your Netgear Orbi router and Orbi satellite is good.

[orbiloginn]

Orbi pink light issue in your Orbi router is a serious issue. The satellite ring LED pulse pink for the following reasons. The WAN port link of your Orbi WiFi router will be down. The router and the Orbi satellite might not get the IP address from the modem or ISP. Or the router cannot connect to the Internet. Similarly, Orbi pulsing blue and magenta are other issues you may face. Is the Internet connection is blocked because of the low traffic meter? Then it will block your router to get internet. That is why you see Orbi pink light issue. When your internet traffic reaches the limit you need to configure it once again.

[orbisetupnetwork]

Having Problems With Your Netgear Orbi Purple Light? Five solutions

Netgear Orbi is a WiFi mesh system that delivers a strong and dependable connection throughout your residence. Most consumers have positive things to say about this system, although occasionally, users report problems with their Orbi system.

A case in point is the Orbi purple light. If you are experiencing network connection issues and the magenta (purple) light is illuminated on your Orbi router, you are in the right place. We will explore what the purple light indicates, what may be causing it, and how to remedy it.

So, let's begin!

What Does The Purple Light on My Orbi Router Indicate?

Your Orbi router's LED light will change color based on the network's current state.

When discussing the purple light, we must consider where it is being observed. Is the issue with the router or satellites?

Observing a solid purple light on your Orbi router indicates that the device cannot establish an Internet connection.

If the Orbi satellite's purple light is illuminated, it cannot synchronize with the router.

How Can I Repair The Orbi Purple Light?

Although it may appear from the causes of the orbi router purple light that you require extensive technical knowledge to cure it, we promise you that most remedies do not require such knowledge.

However, if you begin implementing some of the suggestions and become stuck at one point, you may always contact us for assistance in resolving the issue. Ultimately, they can dispatch someone to solve the problem. Let's begin with the simplest answers if you've chosen to proceed.

Even if you believe there is nothing wrong with the connections because you haven't touched or moved anything, inspecting all cables and connectors is still a good idea. We pay attention to them only when we or someone else is setting up the network.

However, there is a possibility that you or someone else moved some wires when cleaning your home; if the connector were loose, this would be enough to cause an issue. Or perhaps your pet has tampered with the wires. It doesn't matter, as verifying the cables and connectors is not particularly difficult; however, checking each cable and ensuring that it is securely linked to the relevant port is essential.

After confirming that there are no loose connections, examine the Orbi router's indicator light. If the color is still purple, try the following remedy.

Ensure the Ethernet cable is connected between the modem and the Orbi WAN port. You may also try a different cable if you possess one.

There is no better approach to repair a malfunctioning router or other device than to restart it. Simply detach the power wire from the router to accomplish this simple action. Wait a moment and then reconnect it. Wait for the router to restart, and then check the router's light. There is a strong possibility that the purple light will be repaired. If you continue to observe the purple orbi light after resetting the device, you can attempt to restart the entire network.

Reboot the Orbi Network

When restarting your Orbi network, it is essential to follow a precise sequence. Avoid rushing and ensure that the following steps are completed correctly.

Turn off and unplug the modem.

Stop your Orbi router.

Connect the modem and turn it on. Allow around 2 minutes for it to boot up.

Activate the Orbi router. Allow the system two minutes to boot.

Now, examine the Orbi light.

Resynchronize Your Satellite And Router

If you feel the purple light is due to a failed sync, you must sync the devices again.

The procedure is relatively straightforward. Simply locate and push the SYNC button situated on your Orbi router. After that, you must push the satellite's SYNC button. You have two minutes to complete the task. After pressing the SYNC button on the satellite, you must wait for them to synchronize. During the sync procedure, the satellite will blink white and transition to one of the following colors before turning off.

If it turns blue, the sync is successful, and the connection is established correctly.

If the indicator turns amber (orange), the sync is successful, but the connection is weak.

If it becomes magenta (purple), the sync fails, and you must try again.

If the Orbi purple light persists, the cause may not be inside your home. There is a possibility that your ISP is experiencing difficulty or performing network maintenance. To determine if this is the cause of the Orbi purple light, you can phone your ISP's help and describe the problem. Additionally, inquire whether they are suffering a power or service interruption.

Additionally, you can visit their official website and check the outage page or visit third-party services such as downdetector.com to see whether other users have reported connection issues. If a power or service failure is confirmed to cause the purple light, be patient while the problem is resolved. It typically does not persist very long.

Last Words

We hope you have resolved the Orbi purple light without needing to call your ISP or Netgear assistance. As you can see, each of the other methods offered here is straightforward. The good news is that they can also help you with other Orbi-related concerns, so it's a good idea to keep them in mind if you require their assistance.

[loginorbi]

Purple light on orbi or magenta LED on Orbi router? Reasons & Troubleshooting steps.

Getting blinking magenta or solid purple light on Orbi router. Find this guide to know possible reasons causes purple light on Orbi. And steps to troubleshoot manually or using orbilogin.com or orbilogin.net login page.

source: How to fix purple light on Orbi router?

[harrytylor915]

Do You Need a Fix to Orbi Router Blinking Purple/Magenta Light? Get The Fix Here!

The purple or magenta LED on the Orbi router is most likely indicating an internet network connection of the Netgear Orbi router. It is one of the most commonly faced issues by the Orbi router users. The purple LED is the router LED located on the back of the Orbi router depicting the Orbi router network behavior or status. This actually helps while setting up the Netgear Orbi wifi system during Orbi router setup with orbilogin.

[angelsharmaposts]

Sync a Satellite for Netgear Orbi RBK52W WiFi System

Netgear Orbi RBK52W device designed and built to rule out the networking coverage issue from the area where you have an issue of network coverage within your home or office where you feels that the network of wifi is dragging and disturbing you on routerlogin.net. Manual configurations for ADSL Settings netgear DSL Device

 Here are the features of the device that makes this device different from others.

1.     Whole-home wifi system: - Improve your wifi using Orbi whole home wifi system.  Best coverage network.

 2.     5500 Square Feet of Coverage: - It boosts your wifi distance from the basement to be the back yard. Or can extend the range of strong connection with a single network to cover every inch of your home.

Sync a satellite for Netgear Orbi RBK52W wifi system follows the steps mentioned here below.

1.     Place your satellite.

2.     Connect the satellite to a power source.

3.     If the power LED on the back of the satellite does not lightly press the power on/off.

·        The satellite LED pulses in white. The satellite automatically finds the Orbi router’s wifi signal and attempts to synch to the Orbi router.

·        The satellite LED ring lights one of the following colours for about three minutes.

-         Blue: The Orbi router and satellite successfully synchronized and the connection between satellite and router is good.

-         Amber: The Orbi router and satellite successfully synch and the connection between router and satellite is fair. Consider moving the Orbi satellite closer to the Orbi router.

-         Magenta: The Orbi router and satellite failed to synch.

4.     If the satellite ring LED in magenta move the satellite closer to the router and then synch the satellite to the router

·        Press the sync button on the back of the router.

·        Within two minutes press the Synch button on the back of satellite.

5.     Repeat the step 1-4 if your Orbi wifi system came with second satellite with routerlogin.net.

[orbilogin01]

Fix Netgear Orbi router purple Light’s error

Are you frustrated to see orbi purple light on router or magenta LED light flashing on Orbi WiFi system? It is one of the most common issues faced by Orbi users. The Orbi WiFi router supports mesh wifi wireless technology due to which most of the users get confused on how to resolve the glitch on Orbi wifi router. Which causes blinking magenta or purple light on Orbi router and how to solve manually using www.orbilogin.net or orbilogin.net login. 

[orbirouter]

Orbi satellite setup and troubleshooting

Of late, digital systems are evolving into more compact and touchless devices. In any house, you can now find a Wi-Fi system that works across locations with high internet speeds. With digital advancements, it is important to get the best Wi-Fi setup that works seamlessly for you. Orbi satellite and router system is one such advancement that has revolutionized how home networks are made better. You can get the network device from any online store and try installing it on your own. It is easy.

Step-by-step installation guide

Once you unbox your Orbi satellite and router, you have to follow these simple steps to install the device and enjoy a seamless internet connection. Read on and follow:

1.            First, download the Orbi app from the Google Play store or Apple istore and create a new account for setting up the device for your home internet network. This will require your email and password chosen by you. Then, just initiate the “install a new Orbi system” option by selecting ‘yes’.

2.            When prompted, give the Orbi app your camera access so that it can easily read the QR code on your router. This way you can easily identify the router specifications using just your mobile device. Using a phone makes it much easier to control the functionalities of the Orbi satellite. Scan the QR code on the router.

3.            Turn your modem on and off in order to upgrade to the new Orbi system. Plug the Ethernet cable into the yellow internet port at the back of the Orbi router. Plug in the adapter cable to the black port and plug your device into a power source. Switch the adapter on.

4.             Place your Orbi satellites at various locations across your house as you want to have complete network coverage over your property. Plug these in and turn them on. You must wait for them to get fully boot up. Once powered on, the satellite must show solid blue light to show a good connection with the router. If you see amber or magenta light on the satellite, you can move the satellite closer to the router as per the location of your house.

5.            The app will try to auto-configure the default Orbi network. Select yes for easy and prompt installation process when the prompt flashes on the screen of your mobile device.

6.            If you are unable to scan the QR code on the Orbi router previously, you have to connect to the default Orbi router network manually by putting in the requisite information about the network. This information is available under the router itself or the clear sleeve on the router.

7.            Once connected with the network, the Orbi app will search for your satellites. If your satellites are not detected, move the satellites closer to the router and try again.

8.            Now personalise the network using the application on your mobile device. Set up your administrator password. You can change this as and when you like it. If you forget your admin password, you can use security questions to change the password and reset the login credentials. Your setting will start getting applied.

Some tips

Though your Orbi satellites and router are configured well enough, it is advised to update them as per your latest firmware. If you change your Wi-Fi name and password from the default settings, you can reboot the router and allow it a minute to apply the new settings. Once connected with the new settings, you are finished with the setup. You can use the Orbi app dashboard to utilize various features and services the system has to offer. If you face any kind of technical difficulty, you must call up the registered vendor and service professional to address the problem. Never tamper with the device and run it safely.      

 To know more visit: www.orbi-log.com

[oorbilogin]

How to setup orbi router and satellite? orbilogin.com

Searching for a Netgear Orbi Wi-Fi in each corner?

Looking for a Wi-Fi in every corner? Netgear Orbi Wi-Fi system is used to extend the existing wireless network speed with orbilogin.net login. Orbi Wi-Fi system helps you to get rid of boosters and extenders. It comes with Orbi router a satellite. Set up Orbi Wii-Fi system with Orbilogin.com domain.

Below are important steps to setup Netgear Orbi router/Satellite.

To setup Orbi router and Orbi satellite first unplug the modem.

And plug in the modem again.

Using Ethernet cable of your Orbi router connect your modem with yellow internet port.

After that connect Netgear Orbi router to the power plug. Note:Press on/off button of your Orbi router device. Power LED light will on.

You have to wait till the LED light of Netgear Orbi router will become solid white and then pulse white.

For better WiFi network coverage please place your Netgear Orbi satellite nearer to the device where the signal would be in good strength.

Now connect your Netgear Orbi satellite with a power plug. Note: if the power LED on the backside of Netgear Orbi satellite does not show. Then press the power on/off button.

After connecting with the power source the Orbi satellite ring LED light might solid white, then pulse white and then magenta color. Note: Orbi satellite LED might pulse Magenta color it indicates that Orbi satellite attempts to sync with the Netgear Orbi router.

When the Netgear Orbi Satellite ring LED shows the magenta color, after that, it lights the following color for 10 to 12 second and after that, it turns off.

Solid blue: It shows that the connection to your Netgear Orbi router and Orbi satellite is good.

Solid magenta: It shows that your Orbi router and Orbi satellite is not connected now. You need to place your Orbi satellite near to Orbi router.

Solid amber: It indicates that connection is fair, you have to move your Orbi satellite close to Orbi router. Note: After placing your Orbi satellite closer to the Orbi router Orbi satellite ring LED light still liting magenta color. Then press the Sync button on the Orbi router and Orbi satellite.After successfully syncs with the Orbi router and Orbi satellite, Orbi satellite ring LED light still liting in magenta color, then lights solid blue. It shows the good connection and then turns off.

       10. After Syncs has done, now connect your laptop or mobile phone with the Netgear Orbi router and satellite with a WiFi connection or Ethernet cable.Note: When you going to connect with wifi, find the preset WiFi network name (SSID) and password on the label of Orbi router or satellite. And            connect your computer or mobile device with that wifi network.        11. For setup your Orbi router WiFi network you need to download the Orbi app or visit http://orbilogin.com. When Netgear Orbi setup will complete, the Orbi router LED light turns off.

More information: http://oorbilogin.com/