tech-support-blogs - Tumblr blog

[tech-support-blogs]

M.2 External SSD in PlayStation 5: Reasons, Steps, and Instructions

PlayStation 5 users can add external SSD in PlayStation 5. It should have M.2 support with a cooling system on top of it, and it will also expand its PlayStation 5 gaming console storage. This article will tell you the step-by-step process to install the external SSD in PlayStation 5 successfully.

Ensure that you are using an M.2 SSD with a Heatsink cooling structure.

M.2 SSD in PlayStation 5 – Reasons

M.2 SSD devices are high-speed SSDs to increase the storage capacity of PS5 gaming consoles. You can use this storage to Download, launch, and copy PlayStation 5 or PlayStation 4 games.

The External SSD in PlayStation 5 allows you to increase the storage space. However, you can only use some specific M.2 external SSD in PlayStation 5. The M.2 external SSD requirements are:

Interface: PCI M.2 NVMe SSD.

Storage: 250 GB to 4 TB

Sizes: 2230, 2242, 2260, 2280, 22110

Size after including Heatsink: 30, 40, 60, 80, 110 mm (in length)

Read Speed: 5500 MB/s or faster.

Socket type: Socket 3.

M.2 SSD in PlayStation 5 – Required tools

After purchasing the M.2 external SSD, you will need the following things:

Flat surface.

Screwdriver.

Flash Light.

M.2 SSD in PlayStation 5 – Points to Remember

It would be beneficial if you kept these things in mind:

Update the PS5 to the latest system software.

After that, touch a metal object to remove any static electricity from the body.

Place the gaming console on a flat surface.

M.2 SSD in PlayStation 5- Add M.2 External Storage

Follow the step-by-step process to avoid any issue or error during the M.2 external SSD installation in PlayStation 5.

Place the PS5 on a flat surface.

The PlayStation logo should be facing downward.

After that, gently lift the cover with your right hand.

Slide the PlayStation 5 cover off.

You will get the Expansion cover below the cooling fans.

After that, unscrew the expansion cover and lift it.

You will see the green area with five screw holes.

After that, remove the spacer from the hole and place it according to the External SSD size.

Align the External SSD with the notch on the terminal.

Insert your External SSD in PlayStation 5.

Then, tilt the External SSD down and fasten it with the screw.

After that, close the Expansion cover and fasten the screw.

Reattach the PlayStation 5 cover.

Then, reconnect all the cables and turn on the PS5.

Finally, follow on-screen instructions and format the new M.2 External SSD.

M.2 SSD in PlayStation 5- Install Games

You can also download games from the PlayStation Store to the M.2 external storage by following these steps:

Turn on the PS5, and navigate to the Home screen.

After that, select the Settings option.

Navigate to the Storage option.

Then, select the Installation location and set up the M.2 external SSD.

You can also move the Games and Applications on the external SSD.

Conclusion

PlayStation 5 gaming consoles do not support M.2 SATA SSDs. You can also purchase a new external SSD for the PS5 to increase the storage. After that, you can also install or copy games and applications. It will improve the overall experience and performance of the PS5 gaming console. I hope you found this article helpful.This entry was posted in Gaming and tagged PlayStation, PlayStation 5. Bookmark the permalink.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

Source: M.2 External SSD in PlayStation 5: Reasons, Steps, and Instructions

[tech-support-blogs]

Microsoft is launching the new software and hardware to push the Chromebooks

Microsoft announced a simpler version of Windows called Windows 11 SE. It is one of the extraordinary efforts to defeat Chromebooks and make Windows OS for elementary and middle school classrooms.

It is mainly for low-cost education PCs. The OS is suitable for the classrooms and students. Here are all the details related to the Windows 11 SE operating system and Microsoft Surface Laptop SE.

Windows 11 SE- Details

Windows 11 SE is a slightly flexible alternative for the OS that supports third-party applications like Zoom and Chrome. Here are the complete details about the Windows 11 SE operating system. It looks exactly similar to Windows 11.

It is mainly for low-cost education PCs. The OS is to solve the challenges for schools and students with optimization and simplification. The operating system is for low-cost PCs.

Microsoft has also reduced the multitasking feature, and you will not get the Microsoft Store. The operating system also gets proper updates in the backgrounds automatically.

Windows 11 SE- Difference

There are a few key differences between Windows 11 and Windows 11 SE.

It does not have a Widgets menu.

It allows third-party applications.

Applications will open in full-screen mode.

You can only run two applications side-by-side.

The Start menu will also include four recommended files only.

Cloud-first storage + 1 TB

Better battery life.

Windows 11 SE- Education Experience

The new PC will go through an optimization process to provide better educational experiences. It will also include Microsoft 365 for both online and offline experiences. All MS Office applications are in the operating system.

It will also allow students to work offline. You can also sync files with the help of OneDrive.

Windows 11 SE- InTune Feature

Windows 11 SE will enable teachers to manage OS devices via InTune for Education feature. In other words, it has an autopilot feature in mind. The feature also allows IT admins to control your PC from anywhere.

Microsoft Surface Laptop SE

The Microsoft Surface Laptop SE is the most affordable Surface ever because it will cost you $249. However, the company did not announce any shipping dates, but it will launch in 2022.

The laptop will have Intel Celeron N4020 or N4120 processor. HP, Dell, Lenovo, and other companies also use these processors in their laptops. The goal is to be manageable and straightforward so performance will not be an issue.

It will also have a Webcam with lower megapixel support and resolution. It will decrease the cost of the laptop. You will not have any Windows hello feature.

Conclusion

Windows 11 SE will be a great operating system for students. Microsoft has also cut out several features including, a Window hello, Spill Proof Keyboard, Surface connector, Thunderbolt port, and more.

The Surface Laptop SE might be a Chromebook killer. Microsoft is focusing less on hardware. It is more about the Google products and Windows ecosystem. However, you will also get a low-priced computing device with a lot of options.PublishedNovember 22, 2021

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

Source: Microsoft is launching the new software and hardware to push the Chromebooks

[tech-support-blogs]

Troubleshoot the Issue of Brother Printer Not Working with Windows 10

Brother is one of the most reliable printer brands all around the world. Most people appreciate Brother printers, but these users may often get annoyed when their Brother printer suddenly stops functioning. Some of these Brother printer users often report that their printer is not working with Windows 10. If you have come across the same issue, you have come to the right destination. We have described the ways to troubleshoot the issue. Before we explain the complete procedure to troubleshoot this issue, take a look at the causes.

Why isn’t Your Brother Printer Working After Windows 10 Update?

When the latest Windows is not compatible with your printer settings, the issue may often arise. If you want to get rid of the issue, you first need to know about the causes. The list below will help you understand the causes.

The obsolete printer drivers may cause the issue on your Brother printer.

Ensure that you download the printer drivers from the official site and check for viruses before installing them on your system.

Note: To know if your Brother printer supports Windows 10, you can read the user’s manual. We have explained the steps to sort out the issue of the Brother printer not working with Windows 10. Read the methods below and get rid of the issue quickly.

Methods to Fix Brother Printer Not Working with Windows 10

We have already described the basic causes for the issue. We will now introduce you to the methods to sort out the annoying issue faced by Brother printer users. Below are the quick and easy methods for you. Take a look at these below.

Method 1: Update the Printer Drivers from the Official Site of Brother

The issue generally appears when the drivers are either missing or obsolete. To fix the issue, a Brother printer user needs to update the drivers. To do so, you need to visit the official website of Brother. Follow the instructions in the same way as explained below.

Start the process by connecting your system to high-speed internet.

Double-click on the web browser to open it.

After opening the browser, you need to visit the official website for Brother printer Drivers.

To know the official site of Brother printer drivers, read the user’s manual.

When you visit the page, you need to search for the printer model you use.

Look for the Downloads option.

Under the same option, you need to choose the operating system you use.

Then, click on the Search.

Under the Drivers dialog box, click on the Downloads.

Click on the Agree to EULA and download option.

When the download is complete, click on the exe. file to install it.

Follow the instructions appearing on the screen to finalize the installation.

Note: Updating printer drivers requires technical knowledge. If you are not tech-savvy, we suggest you avoid taking risks by applying the methods discussed above. You may hire an expert to fix the issue.

Method 2: Download Printer Drivers Automatically

The second solution to the issue is the same as above, but In this method, we will describe how a person with little technical knowledge can automatically update the drivers. Follow the instructions mentioned below:

Connect your system to the internet.

Open the internet browser on it.

Search for “Driver Restore” in the search bar.

When you have downloaded and installed the Driver Restore, you now need to run the Scan button.

The software will look for the printer drivers that need to be updated.

In order to update the printer drivers, the only thing you need to do is click the Update button.

Following the steps mentioned above will update the printer drivers according to the operating system you are using.

The procedure above will remove the existing issue.

Note: If updating the printer drivers seem difficult, you may download the driver updater programs such as Driver Easy and Avast Driver Updater. These programs do an excellent job of updating the printer drivers.

Conclusion

The above article includes the methods to fix the problem of a Brother printer not working with Windows 10. One can get rid of the issue by carrying out the given procedure. We hope the article proves helpful to Brother printer users.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

Source: Troubleshoot the Issue of Brother Printer Not Working with Windows 10

[tech-support-blogs]

Resolve the Brother Printer Ink Issues

As a printer is a machine, it may face several issues. Ink problems on Brother printers are common. If you are a Brother printer user looking for the solution to the ink problems on your Brother printer, you are at the right destination. We have described the easy methods to fix the ink problems in the provided article. Anyone can put these steps into action and make these problems disappear in minutes. To know how to resolve the ink issues, read the methods below.

What Leads to the Ink Problems?

Ink problems may occur on any printer. The cause of the ink problems is related to both cartridges or the printhead. If you come across ink problems on your Brother printer, you do not need to get worried! We have mentioned some factors that lead to the occurrence of ink issues. Take a glance at the causes below.

If the cartridges do not have sufficient ink, the error may appear on your Canon printer.

If you have not correctly installed the cartridges in your Brother printer, you may face ink problems.

Using third-party cartridges or refilling cartridges with third-party manufacturer’s ink may lead to such problems.

Note: The above-mentioned causes will help you understand the issue. If you do not have good technical knowledge of printers, we recommend you avoid taking risks. In such a case, you should hire an engineer for the resolution of the issue.

Quick Methods to Rectify the Ink Problems on Brother Printers

A Brother printer user may come across ink problems when any issue arises with the ink cartridges. We have listed effective methods to sort out ink problems. Let’s go ahead and try to fix the issue.

Solution 1: Install the Cartridges Properly

If a Brother printer user does not install the cartridges properly, they may face ink problems. We have defined the process to install the cartridges properly and rectify the issue. Follow the steps:

First, you need to open the cover of the ink cartridges and then push the 4 colored levers down.

After that, you have to take the cartridges out of the printer.

Turn on your Brother printer and install the cartridges.

While you are installing the ink cartridges, make sure that the color of the ink cartridges matches.

Install the cartridge one by one properly.

Make sure to click the cartridges correctly.

When you have gone through the process of installing the cartridges, close the cover.

Now, try printing a test page and check if the ink problem has gone away.

Solution 2: Refill Ink Cartridges

When one fills the ink cartridges with a third-party manufacturer’s ink, ink problems may occur. We have given the complete process to help you fix the ink issue. Follow the instructions:

The first thing you need to do is open the cover that encloses the cartridges.

Remove the cartridges.

Make sure that all the cartridges that you have installed on your Brother printer should not belong to the third-party manufacturer.

If any one of these cartridges is empty, you need to refill them with ink.

Use the printer manufacturer’s ink to fill the empty cartridges as using third-party ink may cause a lot of problems.

Now, you need to reinstall the ink cartridges properly on your Brother printer and close the cover.

Turn it on and start printing the documents.

Doing the step-by-step procedure will fix the problem.

Solution 3: Reset the Ink Cartridges

One can fix the ink problems by resetting the ink cartridges easily. We have given the complete procedure to reset ink cartridges. Follow the procedure in the same way as described below

The first thing you have to do is restart your Brother printer.

Open the cover by lifting the lever.

After that, you have to press both the Cancel and Print buttons at the same time.

Click on the + icon and school down to see the ink cartridge you wish to reset.

Finally, press the Enter key on your keyboard to complete the process.

Resetting the printer will fix the problem.

Note: If you are not tech-savvy, you should avoid trying out the steps mentioned above. If the problems are beyond your grasp, contact a Brother printer expert for technical assistance.

Conclusion

Ink problems may occur on a Brother printer due to cartridge issues. The steps given above will assist Brother printer users in getting rid of the ink problems easily. We hope the solutions explained above are helpful.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

source: Resolve the Brother Printer Ink Issues

[tech-support-blogs]

The Best Technological Way to Save Our Planet from Asteroid Collision

However, an asteroid collision wiped out their entire existence. Afterward, the ecosystem of our world changed. And it gradually gave birth to humans, who soon rose to the top of the food chain. Now, humans are different than dinosaurs. We might not be more significant or robust, but we have the gift of research, intellect, and technological prowess.

Should an asteroid collision impact our planet shortly, can we save ourselves? Well, the answer is yes. However, the situation becomes complicated when we take the dynamics of the solar system in our consideration. How can we save the planet without destroying our solar system?

Are Nukes the Perfect Answer to the Problem?

The equation E=MC2 and the nuclear missiles are some of the most technologically advanced creations made by humans. It not only changed the way humans do warfare but also gave us the capability to destroy our planet and the rest of the solar system. And, for many years, scientists have debunked the concept developed by Hollywood films that it is possible to destroy the calamitous asteroid headed towards our planet.

The reason behind the caution is quite simple. If you miss the asteroid, which is coming towards the planet rapidly, it might go elsewhere and destroy our neighboring world. Furthermore, even if humans hit the target, the asteroid will be broken down into several pieces. As a result of that, we might be facing an imminent rain of asteroid rocks, which would burn the whole planet.

However, a different scenario has been observed by the LLNL institute (an acronym for Lawrence Livermore National Laboratory). The laboratory created and studied a simulation upon which they concluded that destroying an asteroid by nuclear missiles might lead to a favorable outcome. The study of LLNL even concluded that humans could even destroy asteroids months before the expected collision. Nevertheless, the simulation also revealed that even successfully getting a spacecraft holding a nuke might be a severe undertaking. Nuking an entire space rock accelerating towards Earth might need genius planning and a significant number of risks.

An asteroid of a size similar to the one that impacted Earth sixty-four million years ago might mean impending doom for the planet. However, humans have been technologically advanced enough to detect an asteroid of that size.

And in the hopeful scenario, we could even detect or destroy the space rock before the impact. Whatever is the case, saving Earth from any kind of asteroid collision would require extensive research and planning. So, there are space agencies that are working on that.

DART Mission

Taking cognizance of the dangers posed by a possible asteroid impact, NASA has started a few endeavors. One of NASA’s projects is about to start is called DART (an acronym for Double Asteroid Redirection Test). In the project, the space agency will send a space vehicle to a double asteroid cosmic system. The location of this dual asteroid system has been called “Didymos.”

NASA’s strategy is to shoot the space vehicle on the asteroid called “Dimorphos,” which is the smaller of the two asteroids. They plan to alter the direction of the asteroid by using a spacecraft. Now, if NASA turns out to be successful in its venture, then the whole mission can be enhanced to deflect the trajectory of a similar but giant enough asteroid.

However, there is a problem. It is that the deflection strategy will not work in the absence of a sufficient lead time. If the DART mission is inconclusive, then NASA and the neighboring space agencies would need to have serious consideration regarding nuclear missiles. This is because it would probably be the only way left.

Conclusion

Are we technologically advanced enough to deter an asteroid collision? Well, there are several answers to this question. Several methods have been put forward to tack this scenario, and nuclear mission is one of the possible answers. However, everything will depend on the DART mission of NASA and how successful they become in altering the trajectory of a distant asteroid system called Didymos.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

Source: The Best Technological Way to Save Our Planet from Asteroid Collision

[tech-support-blogs]

Google Is Looking Forward to Changing the Dynamics of “Workspace,” But a Few Challenges Still Remain

The constant up-gradation in the Workspace suite of tech giants shows a lot of promise. However, the program is gaping at break-neck competition from prominent companies like Microsoft and other fledgling companies. The tech giant has a lot of work to do before establishing dominance in the software collaboration and productivity market.

We all know that Google has released a collaborative platform for productivity and work-related purposes called Workspace. You also must be aware of the reports that have been arriving since June suggesting that “Workspace” has already taken a giant stride towards success as it has lured in three billion users. Such a vast number of users in such a short amount of time gives Google a sense of confidence. An extensive and profiting consumer base can be expected from Google.

However, as far as market share is concerned, the “Workspace” productivity suite still has to wrestle with a lot of its competitors. The competitors include several fledgling productivity toolkits and prominent toolkits, which include none other than Office 365. Microsoft has been longer than Google in this domain of market space, which gives them added advantage.

The Increase in the Consumer Base of Google

If you go by the latest numbers and statistics, then there has been a significant increase in the user-base of Workspace. The statistics have revealed that the number was somewhere around two billion in 2019. However, it has significantly gone up since then. Google has not officially released any breakdown of the data. Nevertheless, a few reports on the internet alludes to the fact that most of the “Workspace” users are Gmail users.

If you wish to have a paid subscription, you would have the option to choose from four alternatives. It was initially called G Suite. Furthermore, you can also obtain free access to a few Google applications such as Drive, Docs, Meet, and Gmail. According to a few reliable data available on the internet, Google had disclosed 6 million users in the paid subscription domain last year.

It was right before the pandemic hit the globe and forced the corporate sector to work from home. The primary application of the productivity toolkits has come during the pandemic. Some application such as Word, Drive, and Docs have not only given a platform for productivity tasks but has also provided secure storage of data.

Microsoft Still Has the Dominance in the Market

Notwithstanding the incessant growth of “Workspace,” some analysts feel that Google has a long road ahead of itself. Microsoft has been dominating the collaborative and “productivity” market share for a long time. And, currently, it is achieving success courtesy of a prominent suite of productivity applications called “Office 365.”

As per the reports from Gartner, Workspace has to increase its growth rate much faster to come close to Office 365.

Google is now presently targeting big corporate houses. It has introduced several changes to its productivity suite since 2019. The statistics are also titling in favor of Google, but only slightly. Microsoft still has unchallenged dominance in the market space. Approximately 89 percent of the productivity tools users worldwide prefer to use Office 365 over any other toolkits.

Conclusion

Google’s creation Workspace offer paid subscription to productivity applications such as Docs, Drive, Gmail, etc. However, the slow growth rate means that they are way behind the leaders of the market, who are thriving at eighty-nine percent. Yet, Google hopes to lure a few more businesses away from Microsoft by introducing interconnectedness and other changes.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

Source: Google Is Looking Forward to Changing the Dynamics of “Workspace,” But a Few Challenges Still Remain

[tech-support-blogs]

Set YouTube to Always Play the Highest Video Quality Permanently

One of the most popular and commonly used video streaming platforms, YouTube covers many excellent features and options. This media streaming service provides its users with a great range of video content, and that too in a much better audio and video quality. From comedy and horror to educational videos and documentaries, here you can find videos of all genres.

One can stream YouTube videos on multiple devices, including Windows, Mac, and Linux computers, along with Android smartphones and iOS devices. The platform adds new features from time to time to boost the streaming experience of all of its users. If you are a user of the YouTube streaming service, you might be aware that by default, it selects the video quality for you based on your internet connection speed and screen size.

When your internet connection is fast enough and the device screen is enormous, you might want to stream high-quality YouTube videos. And fortunately, the platform allows its users to change the video streaming quality with much ease. And you can even set the service always to play the videos in the highest streaming quality. Do you know how to do so?

If you are a YouTube user and want to make the videos always play in HD, you will need to go through this entire post. To help you with this, we will provide you with a method that you can follow to set YouTube always to play the highest quality video. So, please have a look at this complete guide.

Method to Make YouTube Videos Always Play in High Quality

Manually changing the YouTube video quality for every video on a playlist can be pretty frustrating for anyone. But don’t worry. There is a way to make YouTube videos always play in high quality. You can do so using a web browser on your computer.

Multiple browser plugins let you set a video quality permanently for YouTube videos. You can use any Chrome extensions for this purpose. Let’s see what steps you will need to follow to set YouTube to play videos in the highest video quality.

Instructions to Set YouTube to Always Play Videos in Highest Quality

Here are the steps to follow to make YouTube videos always play in highest video quality:

You will firstly have to install the “Improve YouTube” extension on the Google Chrome browser on your device.

After installing the extension, you will have to click on its icon and jump to the “Player” menu.

From the Player menu, you will select the quality you want to play the YouTube videos.

At last, click on the “Done” button, after which the quality of the video will be kept in the selected resolution, even when your internet connection is slow.

You can even speed up the player by choosing the option of Codec h.264. The following extension includes many other features that include screen capture, customize video player size, hide elements, and more.

Instructions to Force HD Videos Through YouTube Settings

You can also force HD videos through YouTube’s settings page. Here’s how to do so:

You will first launch the YouTube app on your smart device.

After launching the app, go to your profile picture and click/tap on it.

From the menu that appears on your screen, you will select the option of “Settings.”

And then, you will jump to the “Playback and Performance” menu.

At last, click on the option of “Always Prefer AV1.” And that’s it.

YouTube added AV1 as the new video decoding support, and it promises to have a better compression rate, smaller package size, and delivering a high-quality video without any loss. Also, you need to know that not all videos on YouTube support AV1.

So, this is how any YouTube user can set YouTube always to play the videos in the highest video quality. Try any of the mentioned methods now to enjoy streaming YouTube videos in high quality. And keep visiting our website to know

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

Source: Set YouTube to Always Play the Highest Video Quality Permanently

[tech-support-blogs]

Fix: Modern Warfare DirectX Encountered Unrecoverable Error on Windows 10

Are you searching for an effective method to solve Modern Warfare DirectX Encountered Unrecoverable error? If yes, then you are at the ideal place as here you will get the solution for this frustrating issue. The bug message clearly shows that there are several hassles in DirectX. So, depending upon your system’s structural design, check out the essential steps to eradicate it with ease.

Shut the Monitoring Tools

If you are struggling to shut the monitoring tools, pursue the provided instructions below:

Do a right-click on the taskbar and go to the flyout menu, then choose Task Manager.

You should find and right-click on the monitoring tools of the third party.

Now, select the End Task option and provide a try to the game.

Upgrade the Windows to Fix the Error

If you are struggling to upgrade the Windows to solve the issue, pursue the provided instructions below:

Hold the Win, and I keys altogether on your keyboard to launch the Windows Settings.

After that, select the Update and Security option after the UI comes into view.

Windows Update screen showing all the connected settings brings upon the system window.

Move to the right-hand side panel and choose the ‘Check for updates’ tab.

You should select the Download tab to take all the appropriate patches.

Pursue the steps to install them and restart the system in case the upgrade asks for.

Now, after installing the newest Windows 10 version, getting the error minimizes a lot.

Confirm the Game’s DirectX Version Requirement

If you want to verify the game’s DirectX version requirement, pursue the provided instructions below:

Get entry to the web page of the game’s publisher, or optionally, you should open its Steam screen too.

Check out and notice its DirectX PC requirements.

After that, hold the Win + R keys on the keyboard to launch the Run dialogue box.

Enter ‘dxdiag’ into it and select the OK to continue further.

The over command will instantly launch the DirectX Diagnostic Tool, and the user will reach the System tab as it is set by default. Check out the DirectX version and see whether it is compatible with that of the game. Furthermore, according to the Windows platform too. For instance, for the time being, Windows 10 compatibles DirectX 12 only.

Now, in case it is outdated, take the newest version of it.

Carry Out a Registry Tweak

If you are struggling to carry out a registry tweak, pursue the provided instructions below:

Hold the Win + X keys altogether on your keyboard and choose the Run within the flyout menu.

Enter ‘regedit’ and select the OK tab to enter Registry Editor.

Navigate to the under mentioned path: Computer > HKEY_CLASSES_ROOT > PROTOCOLS > Filter > text/xml.

Go to the toolbar and select the File, then pick the Export option.

Choose a safe location, give a name to the File, and store the chosen registry branch.

Continuing ahead, do a right-click on ‘text/xml,’ select the Delete button.

Now, to verify the deletion process, click on the Yes option.

Finally, shut the registry and reboot the Windows 10 system to solve the DirectX gaming issue.

Set up Display Scaling

If you are struggling to set up the display scaling, pursue the provided instructions below:

Press the Win + D keys on the keyboard, reach the blank area, and then right-click.

You should click on the Display Settings.

Then select the link of ‘Advanced scaling settings’ at the right-hand side of the pursuing screen.

Navigate to the Custom scaling field and input 100 into the text section given.

Later, select the Apply tab.

Now, to save the custom scaling factor, click on the Sign-out.

Install the Newest Game Version

If you are struggling to install the latest version of the game, pursue the provided instructions below:

Perform a right-click on the Start logo and choose the ‘Device Manager’ from the flyout Win + X menu.

After launching the console, reach the category Display adapter and right-click on it.

Go to every graphics card on a list, right-click on it individually, and select Update Driver.

Choose Search Automatically for drivers from the window that can be opened.

Continue with the steps and complete upgrading the graphic card.

To take the modification into effect, restart the system and open the game once more.

Hopefully, there will no longer be DirectX errors.

So, there you have got the easiest and attractive methods to fix the issue.

Eva winget is a Microsoft Office expert and has been working in the technical industry since 2006. As a technical expert, Bella has written technical blogs, manuals, white papers, and reviews for many websites.

SOURCE: Fix: Modern Warfare DirectX Encountered Unrecoverable Error on Windows 10

[tech-support-blogs]

How to use YouTube Picture-in-Picture Mode on Your iPhone or iPad?

Like all other video streaming platforms such as Netflix and Prime Video, YouTube is also the most commonly used and popular service. It is not only a video streaming service, but it also enables the users to upload their video content as well. For that, one should create a YouTube channel, and doing so is also pretty easy.

The following video streaming service includes several great features that provide the users with the best streaming experience. YouTube is available to use on multiple platforms, including Windows, Mac, Android, and iOS.

One can use this service without paying any charges. And if you want to use the additional features of YouTube, you can consider subscribing to its premium version. To boost the users’ experience and make the application easier to use, YouTube adds new streaming features to its platform.

For instance, back in June, the platform started to roll out Picture-in-Picture mode for iOS device users. Even though the feature is not widely available yet, and if you are a premium subscriber of YouTube, you can experimentally enable the PiP mode in the mobile app. YouTube PiP mode on iPhone and iPad is something that Apple device users have wanted for a long time.

And now, it seems that the waiting period is almost over. Do you want to know how to watch YouTube videos in the PiP mode on your iOS device? Do you also own an iPhone or iPad? To see how to play the YouTube videos in the PiP mode on your iOS device, you must read this entire post. Here, you will get the ways to use YouTube PIP mode on your iPhone or iPad.

All About Streaming YouTube Videos in PiP Mode on iPhone and iPad

The Picture-in-Picture mode on YouTube has been available for Android device users for years. And now, iOS device users are also able to use this functionality. The PiP mode has become the most common feature that you can find in other services.

And using it is also pretty straightforward for anyone. The Picture-in-Picture mode lets users play a video in a small window while the rest of the screen can perform other tasks. This feature is undoubtedly great for multitasking.

You can activate the YouTube PiP mode on an iOS device with much ease. To do so, you will have to follow the technique that we will provide here. So, let’s move on to the guide on activating the YouTube Picture-in-Picture mode on iPhone and iPad:

The Method to Use YouTube Picture-in-Picture Mode on iPhone and iPad

Follow the below-mentioned instructions to stream YouTube videos in the PiP mode on iPhone and iPad. Before getting started with the technique, make sure that you are a premium subscriber of the service.

To get started, firstly, you will have to launch a web browser of your choice on your iOS device and then jump to “youtube.com/new.”

After reaching the next page, locate the “Picture-in-Picture on iOS” section. And then tap on the “Try it Out” button. Now, the feature will get activated in the YouTube app on your iOS device.

And then, you will have to launch the YouTube app on your iPhone or iPad and play any video to watch.

After this, press the Home button on your iOS device or swipe up from the bottom to get to the home screen.

You will now see the YouTube video playing in a mini player on your device’s home screen. And that’s all.

You can make the mini-player smaller or bigger by pinching the PiP window. Or you can drag and drop the playing video anywhere on your device’s home screen.

Alternative Method for Playing the YouTube Video in PiP Mode via Safari on iPhone and iPad

If you don’t have a YouTube premium subscription, and you still wish to watch the videos in the PiP mode on your iOS device, you need to follow the below-given instructions:

Firstly, launch the Safari browser on your iOS device and then go to the YouTube website.

After you get to the website, you will have to tap on the text icon “Aa” placed on the address bar. And then, select the option of “Request Desktop Site” from the context menu.

Next up, you will have to choose a video to play. And then play the video in the full-screen mode.

Now, go to the top left corner of the screen and tap on the PiP mode icon.

After this, the video will start to play in a mini player. Swipe up from the bottom of the screen, or you can press the Home button to minimize Safari and enjoy your favorite YouTube video in the Picture-in-Picture mode on your iOS device. And that’s it.

So, these are the two different and easy ways following which any iOS device user can play the YouTube videos in the Picture-in-Picture mode. Try the first method if you have a YouTube Premium subscription plan. Or you can also go for the second one. Anyway, that’s all we can provide you with for now. Please stay connected to us by visiting our official website if you wish to read more posts like this.

Eva winget is a Microsoft Office expert and has been working in the technical industry since 2006. As a technical expert, Bella has written technical blogs, manuals, white papers, and reviews for many websites.

SOURCE: How to use YouTube Picture-in-Picture Mode on Your iPhone or iPad

[tech-support-blogs]

Google Maps: Top Tips And Tricks

Google map is a fantastic tool. It is beneficial whether in your car or navigation or a never visited city. You can easily go from a to b. It also gathers information on the places that you are visiting. Google Maps also has some less known features that can be quite useful, especially if you do not know. In this article, we will see the five best tips and tricks of Google Maps. You will definitely learn something new.

Future Traffic

Everyone knows that Google Maps is a decent good satellite navigation system. It will tell you when there is heavy traffic. You can see it on the map. When it gets red, it means it has heavy traffic.

You can also plan ahead. You can look at the exact date and time you are going to be traveling and see the expected traffic. It will show any route that is better on the weekend or busier during a weekday.

Open Google Maps

Go to the Menu

Click on the Traffic option.

You can see live traffic now.

Click on the Live traffic and change it to Typical traffic.

Select your desired date and time.

You will see all the busy areas. It really does help if you are planning a trip and you need to be there by a certain time.

You will get some kind of info if you put in a start and endpoint. You can also use the live traffic option during navigation. You can start planning your trips with more precision.

Car Park Pin

This feature helps you a lot in several cases. Suppose you are somewhere where you have not been before or unfamiliar with that place, and you have parked up your car. You can instantly pin where you are parked. You can also add some other information. It is easy to find your way back.

Go to Google Maps.

Tap on the Blue dot.

Click save your parking.

When you click on save your parking, it will put a pin exactly where you have placed it. At the bottom of the screen, you will see more info. You can put in extra information by clicking this button. You can also add duration for the remaining parking time and add some photos. When you are back in the place, tap on the pin and select the clear option. You can also share your parked location with your contacts. It is a really cool feature.

Location Sharing

It is probably the well-known feature of Google Maps. There are a couple of messaging apps where you can directly share your location. If you want to share your location through Google Maps, you can do that too.

Go to the menu.

Click Location Sharing

Select the share location option.

Share the app or contacts.

This is the way to share location through Google Maps. You can also choose a duration to share your location. There is also a physically turn-it-off option. It is best for safety purposes and a simpler way of telling people exactly where you are.

Custom Lists

Google Maps is used a lot for planning visits. This is a really good gesture of the maps if you want to plan places to visit. You are not required to write them down separately. You will get all the information on Maps.

It is publicly shareable, which means you can share any created list publicly. You can share it with friends or the public.

Open the Google Maps.

Go on to Menu

Click on Your Places.

Select the saved option. You will get three default options.

Click on the + icon to create a custom list.

Select Create option. You can also add descriptions on the created list.

Click on add places to add different places for the list.

Click on any place available on Google Maps.

Select the Save option

Add this place to your desired list.

Measure Distance

Google maps has a feature called the measuring distance tool. You can use this feature for measuring running distance. If you are going for a run and want to plan a specific distance, you can use this feature. Google maps will help you to get from A to B; it will show you the route. It may not be the route you want to take.

You can go for a random run or walk. There is an option for this in Google Maps

Open Google Maps

Drop the pin at the starting point.

Select the Measure Distance option from the drop-down menu.

It will start the feature.

Select the endpoint on Google Maps.

You can choose several endpoints to change the direction or route. The total distance will be displayed at the bottom of the screen. You can use this feature for finding running or walking routes.

Conclusion

We use it daily for navigation or finding our way. These tips and tricks will make you a Google Maps Ninja. There are a lot of cool features in Google Maps, but these are the ones that are very useful for you.

source: google-maps-top-tips-and-tricks

[tech-support-blogs]

Apple iMac 24 M1 a Portable Desktop Review

Apple recently launched its new iMac called Apple iMac M1. M1 is unlike any iMac you have ever seen before. MacBook Pro and MacBook Air was the first machine powered by M1 chip. They were faster and longer battery life. They were better than any other MacBooks at that time.

M1 is now everywhere in Pro, Air, Mini, and even iPad Pro. We are now seeing it on the all-in-one desktop form factor. It is the new 24-inch iMac.

Display

It has a 4.5k 23.5-inch retina display. It just looks fantastic. It covers the full DCI p3, which means it can display over a billion colors. It is one of the displays which makes high-resolution photos look three-dimensional. It has high 500 nits of brightness. Many gaming laptops and the iMac screen can make anything pop.

The video looks great too. The iMac M1 does not technically support HDR, but it has a really deep color balance.

Color and Design

There are seven different color options. Yellow, Orange, Purple, Blue, Green, Silver, and Red. Each of these has a front and a back color, and both are different. It feels a lot more natural and interesting.

Apple had gone through and made every single angle and curve match. You will also get the same feeling for a slightly tweaked new magic trackpad and keyboard. The power cable is also in the same color. You can adjust your icon color to match your iMac color. It is very thin so it can fit anywhere. It is 11.5 mm thin on the monitor, which is just four mm more than iPhone 12. It is almost thinner than most of the monitors you have seen.

Performance

You can thank Apple’s M1 processor for its new redesign. That chip allows the MacBook air to basically be a portable powerhouse. It is far more efficient than Intel’s chip designs. You will not need complex cooling and all the compromises you used to have before.

The RV unit has an eight-core GPU. It makes everything super responsive. You will love the way it instantly wakes up from sleep when you put your finger down on the Touch ID button. It boots straight into the mac desktop from a cold boot in 25 seconds. You will not see this speed in any other intel mac computer.

It has no trouble running any games.

Speakers

Apple iMac M1 also has a nice and decent sound system. It has six speakers. Eight-core iMac did a great job of playing the soundtrack. It is very heavy as well. There is a lot of low end on the speakers. For a really thin computer, it is pretty solid. You can have a nice session on this computer. It is loud enough to fill a small room without having any issues.

There is also a Dolby Surround sound support. It simulates surround sound. You will feel like there are speakers right behind you for precise times.

Webcam

The webcam is not visible at first glance in iMac M1. Apple managed to squeeze in a 1080p webcam into the iMac. This is the highest resolution camera you have ever seen on a Mac. It is better than other cameras you have seen before. However, it does not match the quality, but it is pretty good. It is a very nice upgrade.

Price

Apple iMac M1 has three different price ranges. It starts at $1299 for 8GB memory and 256 GB of storage and goes up to $1699 for 16 GB of memory and 512 GB of storage. You can choose between 256 or 512 storage options.

Conclusion

You can use it anywhere in your home. It is very light and thin. There is just a single cable that connects everything. It is a magnetic cable. There are probably several other ways you could use it.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

SOURCE: Apple iMac 24 M1 a Portable Desktop Review

[tech-support-blogs]

A Simple Guide to Host a Spotify Listening Party on Discord

Do you want to host a Spotify listening party on Discord? Wondering how you can do so? These days, Discord is becoming a popular choice among most gamers. It is a group-chatting app that is designed to provide gamers a platform to build communities and talk. Discord was launched in the year 2015, and it also enables users to send messages to each other. On the other hand, Spotify is also popular music streaming app that you can use to play songs. It also includes various great features that maximize your music streaming experience. For instance, if you are a person who likes to play games along with listening to your favorite playlists with your friends, then you must know that you can host a Spotify listening party on the Discord channel. You can do so using a Discord feature that enables you to listen to music with friends on Spotify.

For hosting a Spotify listening party on your Discord channel, you will have to connect your Spotify account with Discord. And thankfully, doing so is not any difficult task. If you don’t know how you can connect your Spotify account with Discord to host a listening party, you must go through this complete article. Here, you will get to know how you can host a Spotify listening party on Discord. To get the method for this, please consider reading this complete post.

Method to Host a Spotify Listening Party on Discord

With a Spotify feature called “Listen Along,” you can play your favorite music while staying connected with your friends on Discord. For this, you will have to follow a proper method to enable the feature. Before getting started with the technique mentioned here, you need to know that you and all the participants need a Spotify premium account for this. Otherwise, you and other participants will not be able to activate the feature. If you have sent the invitation to the participant who doesn’t have a Spotify premium, then they will receive an error message and will not be able to participate in the listening party. So, you must ensure that you and the other participants have a Spotify premium account. And now, to finally start a “Listen Along” session on Discord, let’s see what instructions you will need to follow.

Steps to Host a Spotify Listening Party on Discord

Here are the steps through which anyone can easily host a Spotify listening party on Discord. Please take a look below:

You will have to start the task by connecting your Spotify account with Discord. To do so, you must log in to your Discord account first and then go to the “Settings” section and choose the option of Connection>Spotify.

And after connecting your Spotify and Discord accounts, launch the Spotify app and play any music as per your choice.

Now, navigate back to the Discord while playing music on Spotify. And here, you will see a green play icon in the message box.

Click on the green play icon and then choose the option of “Invite [user/channel] to Listen to Spotify.” You can use the following feature on public/private Discord channels as well as on personal DMs.

And now, you will have to send an invite along with a message to a friend. If you want, you can leave the “Add a Comment” text box blank.

To proceed further, click on the “Send Invite” button.

After this, the friend will receive an invite link from you. They have to click the “Join” button in order to join the listening party. And that’s it. That’s how you can host a Spotify listening party on Discord.

To leave the Spotify listening party, one will need to click on the “X” button located above the profile picture preview.

So, this is the way to host a Spotify listening party on Discord. Try the procedure now and enjoy your favorite playlist with your friends while playing any game. And please do share the post with your friends. If you want to know more, you can take a tour of our official website.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

SOURCE: A Simple Guide to Host a Spotify Listening Party on Discord

[tech-support-blogs]

A Guide to Install a Network Printer on Windows Computer

In this blog, we will explain to you how to add a Printer manually in Windows. Sometimes, users don’t find a new printer or are unable to detect it on their windows system. You get irritated when your system can’t find a network printer. In this case, you can add or install a network printer manually on your Windows system.

Steps to Install a Network Printer Manually in Windows

First, tap on the Start button and then go to Settings.

Now, you need to go to Devices.

Press on Printers and Scanners.

You need to tap on Add a printer or scanner button.

If your windows system isn’t able to find your printer, then tap on the Printer that I want that isn’t listed.

Now, tap on Add a network printer or local printer with manual settings, and hit Next.

Tap on Create a new port and choose Standard TCP/IP Port.

Tap on the Next button.

You need to enter the IP address of your printer and click Next. You can see the IP address of the printer in your system.

Your system will show Detecting TCP/IP port and give your system some time to find it.

Now, choose your printer type in Standard, and select next.

Your system will show Detecting the driver model, let it find that, and you need to have some patience until you find that.

You can see your printer name on the system, and you need to choose the manufacturer from the left-side list and printer from your right side, and click on Next, and your system will install it.

If you can’t see your printer in the list for some reason, you need to tap on Windows update to find drivers, or you can press Have Disk and search for: System32/DriverStore/FileRepository and search the file c_printer.inf amd64.

Now, choose it and tap on open and install it.

If you can see your printer in the list, then press Next.

Tap on Use the driver that has been installed already and hit Next.

You need to type a printer name and hit on the Next button.

Choose share this printer or do not share this printer on the next screen and choose next and then click Finish.

Now, the network printer has been installed on your system, and it is ready to use.

Steps to Add a Printer using USB in Windows 10

Connect your printer and system both with a USB cable. Now, connect one end of your printers’ USB cord to the other USB outlet of your system.

Follow the installation steps. Your system will automatically detect your printer and follow the instructions to install the printer driver.

Check whether your printer has been successfully added or not. To do this, tap on the Start button that is shaped like the Windows logo that appears at the bottom-left corner of your screen.

Then go to Settings> Devices> Printers and Scanners. Alternatively, you can also do this using the Control Panel. You need to go to Hardware and Sound> Devices and Printers.

If you have set your printer correctly, you can see the printer in the printers’ list.  You can also print a page to confirm that the set-up is complete.

Note: Before setting up your network printer to a computer, make sure it is connected to the power source. You need to connect the internet to your system to download the important drivers for installing.

Conclusion

Installing a network printer on your Windows system is an easy process. Nowadays, people are using their own printer for office or personal purposes. This will help them to easily install and connect their printer in Windows and Windows 10 systems. You only need to have an IP address, proper internet connection, and USB cable.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

source: A Guide to Install a Network Printer on Windows Computer

[tech-support-blogs]

How To Fix Screen Won’t Turn Off After Specified Time On Windows 10?

Some Windows 10 users report that their system’s screen will not turn off after a particular time. Sleep time is very important for the system’s life because it offers the PC time to rest and store power while in idle mode. If you want to get rid of this issue, you can follow this article completely.

Update The Drivers To The Newest Versions

To update the drivers to the newest versions, follow these on-screen steps by steps directions provided below:

Go to the Windows menu on the PC.

Afterward, right-click on it, then choose the ‘Device Manager’ via the menu.

Then, you should extend the ‘Display adapters’ option or another option with drivers with exclamation points.

Thereafter, select the particular driver, and right-click on it then choose the Update Driver option.

You should select the ‘Search automatically for updated driver software’ option.

Later, you have to wait for the installation process to finish.

Finally, restart the system.

Modify The Sleep Settings

To modify the sleep settings, follow these on-screen steps by steps directions provided below:

First and foremost, launch the Run accessory using Win and R buttons together over the keyboard.

Once you see the Run prompt, input ‘control.exe powercfg.cpl,,3’ into it, then hit the OK button.

After launching the ‘Power Options’ screen, check for the USB settings.

You should extend the ‘USB selective suspend setting’ option.

Thereafter, hit on the pull-down menu next to the Settings option.

Then choose the ‘Disabled’ settings via the pull-down menu.

In case you are enacting this over a laptop, you will notify ‘On battery and Plugged in’ settings.

Later, you can simply turn off both these options.

After doing that, hit the Apply and OK buttons.

Modify The Power Plan Settings

To modify the power plan settings, follow these on-screen steps by steps directions provided below:

Go to the Windows logo and click on it on your system.

After that, click on the Settings option.

You should click on the System option.

Thereafter, reach the ‘Power and Sleep’ option and select it.

Make sure that the Sleep settings are adjusted to the preferred value.

Navigate to the ‘Additional power settings’ option and click on it.

You should click on the ‘Change Plan Settings’ option and nearby to the option.

Later, click on the ‘Change advanced power settings’ option and click on it.

Go to the ‘Power Options’ page, extend all the settings and make sure that they let the system reach the sleep mode.

10.Now, set it to the ‘Allow the computer to sleep’ option.

Detach The Devices Linked To The System

To detach the devices linked to the system, follow these on-screen steps by steps directions provided below:

1. First and foremost, detach other USB devices.

2. After that, detach the display cord via the backside.

3. You have to wait for a moment.

4. Then connect the display cord back to the system once again.

5. Later, wait and check whether it works for you.

6. You should also reach the Device Manager and turn off the ‘HID-Compliant Game controller’ option with other game controllers since those often show to trigger the problem.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

SOURCE: How To Fix Screen Won’t Turn Off After Specified Time On Windows 10?

[tech-support-blogs]

How to Fix SSD not Showing Up on Windows?

SSD is essential and receiving more acceptance than the earlier known and utilized HDD due to stability, speed, and many features. Numerous users are complaining that Solid State Drives not bringing up on Windows is the problem. So, here are a couple of fixes given below to follow them.

Fix Hardware Problems

To fix the hardware problems, pursue these on-screen steps by step instructions given below:

Firstly, invoke the Run accessory using Win and R hotkeys simultaneously over the keyboard.

After opening the Run prompt, insert ‘control panel’ into it, press the Enter button, and hit the OK button.

Once invoke the Control Panel screen, input ‘Troubleshooting’ into the search section and hit the OK button.

Then select the Troubleshooting option via the results.

You should select the ‘View All’ option over the left and side of the screen.

Later, select the ‘Hardware and Devices’ option.

After that, hit the Next button on the prompt screen and pursue the steps.

Now, the troubleshooter process will scan for issues.

You should click on the ‘Apply this fix’ option and solve the problems.

10.Finally, reboot the system.

Alter Settings through Disk Management Tool

To alter settings through the Disk Management tool, pursue these on-screen steps by step instructions given below:

At first, launch the Run accessory using Win and R hotkeys simultaneously over the keyboard.

After that, input ‘diskmgmt.msc’ into it and hit the Enter key.

Then you should detect the SSD drive in the list and choose it.

Go to the SSD driver wherever the name is situated and right-click on it.

Thereafter click on the Initial Disk option to format the drive.

You should select between the bootable (MBR), or storage device (GPT) then hit the OK button.

Afterward, select the HDD size of the SSD and right-click on it.

Then click on the ‘New Simple Volume’ option.

You should choose the required space.

10.Once launched the Format Partition, click on the NTFS option.

11.Now, pursue the on-screen steps to complete.

Update Motherboard Storage Controllers

To update the motherboard storage controllers, pursue these on-screen steps by step instructions given below:

To open the Run pop-up, use the Win and R key combination on the keyboard.

Thereafter, input ‘devmgmt.msc’ into it and hit the Enter button.

Once invoked the Device Manager screen, press the OK button.

You should extend the ‘Storage Controllers’ option.

Go to the controller and right-click on it, then choose the ‘Update driver software’ option.

Jump to the next screen and choose the ‘Search automatically for updated driver software’ option.

Now, the PC will browse for drivers online and then install them.

Redo the exact thing for the ‘IDE ATA/ATAPI Controllers’ option.

You should reboot the system to check whether this process helped repair SSD not displaying problems.

Perform Memory Diagnostic Tool

To perform memory diagnostic tool, pursue these on-screen steps by step instructions given below:

Press the Win and R keys combination over the keyboard to bring up the Run accessory.

Once invoked, insert ‘mdsched.exe’ into it and hit the Enter button.

You should hit on the ‘Restart now and check for problems (recommended)’ option.

Finally, Windows us checking for memory issues and notifies any problems.

Modify SATA Controller Mode

To modify the SATA controller mode, pursue these on-screen steps by step instructions given below:

First of all, reboot the system.

Thereafter, while rebooting, hold the F10 or F2 keys to boot into BIOS.

You should reach the ‘Advanced’ tab and move to SATA Controller Mode.

Then choose the SATA slot that attaches the SSD and hit the Enter key.

Later, store the changes and shut it.

Finally, reboot the system.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

SOURCE: How to Fix SSD not Showing Up on Windows?

[tech-support-blogs]

A Device Attached To The System Is Not Functioning: Here Are The Fixes

When you cannot communicate and move your date properly and get “A device attached to the system is not functioning” error due to some reasons like incorrectly connected, incompatible drivers, and many more. If you wish to get rid of this annoying error, here are a couple of fixes mentioned belo.

Modify the Transfer to PC or Mac Settings on iPhones

To modify the transfer to PC or Mac settings on iPhones, pursue these on-screen step by step directions mentioned below:

First and foremost, go to the Settings application on the iPhone device.

Afterward, move down till you locate the ‘Phone’ settings and choose it.

After going to the Photos settings section, move down until you get the “Transfer to Mac or PC Settings” option.

You should choose the “Keep Originals” option and attempt transferring the files once again.

Now, check to view whether the problem continues.

Format the Device

To format the drive, pursue these on-screen step by step directions mentioned below:

To invoke the File Explorer, use the Win and E hotkeys simultaneously on the keyboard.

Thereafter, select the ‘This PC’ icon on the desktop or left side navigation panel.

You will get the USB device connected.

After that, right-click on it, then choose the ‘Format’ option.

You will get a prompt screen consisting of all the settings. In case you are not sure what to choose, leave it be and hit the Start button.

Once you have done, attempt using the USB device and check whether the issue is fixed.

Run DISM and SFC Commands

To run DISM and SFC commands, pursue these on-screen step by step directions mentioned below:

First, hold the Win and R hotkeys simultaneously on your keyboard.

Thereafter, input “taskmgr” into it and press the Enter button to open the Task Manager.

You should select the File option shown on the upper left side of the screen.

Then click on the “Run new task” option via the list of the available options.

Thereafter, input “Powershell” into the dialog section and tick the option beneath, which says “Create this task with administrative privileges.”

After getting the Windows PowerShell screen, insert “sfc /scannow” into it and press the Enter key. This method consumes some time as the whole Windows files are being scanned by the system and checked for damage phases.

In case you face an error wherever Windows states that it gets some issue but is unable to solve them, you should input “DISM /Online /Cleanup-Image /restorehealth” into the PowerShell section. It will download the damaged files via the Windows update servers and replace the damaged ones. Don’t stop this process, because it can take some time according to the internet connection.

Update the Device Drivers

To update the device drivers, pursue these on-screen step by step directions mentioned below:

At first, you have to press the Win and R keys combination on the keyboard to invoke the Run section.

Thereafter, insert “devmgmt.msc” into the Run section and hit the OK button.

Once you invoke the Device Manager screen, go via every hardware and right on your device, you are getting the issue and then choose the ‘Update driver’ option.

Finally, Windows will prompt a dialog section asking you which way you wish to update the driver. You should choose the other (Browse my computer for driver software) option and continue.

Later, choose the driver file you downloaded via the browse button once it shows and update it accordingly.

Finally, reboot the system and check whether the issue gets fixed.

SOURCE: A Device Attached To The System Is Not Functioning: Here Are The Fixes

[tech-support-blogs]

Profile Not Deleted Completely Error On Windows 10: Here Are The Fixes

When a Windows 10 user tries to remove the Windows 10 profile, he might get a ‘Profile not deleted completely’ error. This specific error is complained about on all Windows 10 editions. If you are also struggling with this error, you can follow these resolutions provided below.

Turn off Windows Search

To turn off Windows search, pursue these on-screen instructions mentioned below:

To launch the Run accessory, use the Win and R keys combination over the keyboard.

After that, insert ‘services.msc’ in the Run box and select the OK button.

Once you get a UAC (User Account Control) pop-up, hit the Yes button.

After going to the Services window, move on to the right side and go down via the available services list until you find the Windows Search see If service.

Once you manage to find the right service listing, right-click on it, then select the ‘Stop’ button via the context menu.

After stopping the service successfully, launch the Run accessory by pursuing the above steps.

Then insert ‘SystemPropertiesAdvanced’ and hit the Enter button to invoke the System Properties window.

You should enter the Advanced tab via the upper menu and select the Settings option related to the User Profiles.

After going to the User Profile menu, choose the profile you would like to get rid of and hit the Delete option and verify the method to delete it properly.

10.Once you have managed to delete the suspicious Windows profile without facing the exact ‘Profile not deleted completely’ error. Hold the Win and R buttons simultaneously to launch another Run pop-up.

11.Afterward, insert ‘services.msc’ into it and select the OK button to launch the Services window. Once you see the UAC (User Account Control) prompt, press the Yes button.

12.Once you returned successfully to the Services window, find the Windows Search service again via the right-side section, enable it again by right-clicking on it, and then select the Start button.

Remove the Leftover Registry Keys

To remove the leftover registry keys, pursue these on-screen instructions mentioned below:

To open the File Explorer, use the Win and E buttons simultaneously on the keyboard.

Then go to the C:\Users folder and click on it.

Then, find the folder named once the folder you would like to get rid of.

Once you get it, right-click on the right folder and hit the Delete button via the context menu.

Open the Run prompt by using Win and R keys altogether on your keyboard.

Then insert ‘regedit’ into it and hit the OK button to bring up the Registry Editor screen.

You will get a UAC (User Account Control) pop-up and then click on the Yes button.

After that, utilize the left pane menu to enter the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

Beneath the ProfileList section, you will see the keys series-parallel to a Windows Profile. The job is to enter each entry and look at the ‘ProfileImagePath’ data related to it.

10.After managing to detect the right ProfileList key that includes remnants of profile data, right-click on it, then pick the Delete button.

11.Now, reboot the system.

Remove the Unknown Account

To remove the unknown account, pursue these on-screen instructions mentioned below:

Invoke the Run accessory by using Win and R buttons simultaneously on your keyboard.

Once it opens, insert ‘sysdm.cpl’ in it and hit the OK button.

After launching the ‘System Properties’ window, select the ‘Advanced’ tab, then choose the Settings option related to the User Profiles.

After getting UAC (User Account Control) pop-up, press the Yes button.

Go to the User Profiles menu, choose the ‘Account Unknown‘ profile, and then hit the Delete button.

Finally, reboot the system and check the issue.

Ella johnson has extensive expertise in Microsoft Office and has spent a good part of her life working in the technical industry. Ella has written several technical blogs, manuals, and reviews for several renowned websites.

SOURCE: Profile Not Deleted Completely Error On Windows 10: Here Are The Fixes