#split ac vs window ac which is better

[meenusworld105-blog]

A/C Buying Guide | AC Kaun Sa Lena Chahiye | Window AC vs Split AC | which AC is best? #meenusworld

[aviltwayne]

Comparing Split vs. Window ACs: Which is Right for Your Home

When it comes to cooling your home, choosing between a split AC and a window AC can be a tough decision. Both types of air conditioners have their advantages and drawbacks, so understanding their differences can help you select the best AC for your needs. Whether you’re looking for a basic cooling solution or a high-tech smart AC, this guide will walk you through the key factors to consider when deciding between a split and window air conditioner.

1. Cooling Capacity and Efficiency

One of the first factors to compare between split and window ACs is their cooling capacity. Split ACs generally have a larger capacity, making them suitable for cooling bigger spaces like living rooms or large bedrooms. On the other hand, window ACs are better for smaller rooms, as their cooling power is usually more limited.

In terms of energy efficiency, split ACs tend to perform better. Many modern split units are equipped with inverter technology, which adjusts the cooling power based on the room's temperature, leading to significant energy savings. Window ACs, while cheaper, often lack this advanced technology, making them less efficient over time.

For those who prioritize energy savings, split ACs are often the best air conditioners in terms of efficiency.

2. Installation and Space Requirements

When it comes to installation, split and window ACs are quite different. A split AC has two components: an indoor unit and an outdoor unit, which are connected by pipes and cables. This means split ACs require professional installation and take up more space overall. The indoor unit is mounted on the wall, while the outdoor unit needs to be placed outside, usually on a balcony or rooftop.

Window ACs, however, are a more compact option. As the name suggests, they fit into a window and are much easier to install. For those living in apartments or homes with limited outdoor space, a window AC can be more convenient. That said, window units can block your view and may not fit into every window, so it’s important to check the dimensions before purchasing.

If you’re looking for a quick and simple solution, a window AC is the way to go, but for larger homes or rooms, a split AC will offer better long-term comfort.

3. Noise Levels

If you value peace and quiet, a split AC is the better option. The outdoor unit of a split AC houses the compressor, which is the source of most of the noise in an air conditioner. This setup ensures that the indoor unit remains much quieter.

On the other hand, window ACs tend to be noisier because the compressor is built into the same unit that sits inside your window. While some newer models have reduced noise levels, they still generally can’t compete with the near-silent operation of split ACs.

For bedrooms or study rooms where minimal noise is crucial, a split AC is often the best AC to buy.

4. Smart Features and Technology

If you're looking for a smart AC, split units typically offer more advanced features. Many split air conditioners come equipped with smart technology, allowing you to control the temperature, set timers, and monitor energy consumption via a smartphone app. Voice control integration with assistants like Alexa or Google Assistant is also becoming common in split ACs.

Window ACs, though more basic, are slowly catching up with smart technology. Some models now come with Wi-Fi connectivity and app control, but these features are not as widespread as in split ACs.

If smart features are important to you, a smart AC split model is the clear winner.

5. Cost Considerations

When comparing costs, window ACs are generally more affordable upfront. They are often the best air conditioners for those on a budget. However, split ACs, while more expensive initially, offer better long-term savings due to their energy efficiency and smart features.

Additionally, the cost of installing a split AC can add to the overall expense, as it typically requires professional installation, whereas a window AC is much easier to install yourself.

Conclusion: Which AC is Right for You?

Ultimately, the choice between a split AC and a window AC comes down to your specific needs. If you're looking for an affordable, compact, and easy-to-install option for a smaller room, a window AC may be the right choice. But if you're after a quieter, more energy-efficient, and smart AC with advanced features, a split AC is worth the investment.

For those seeking the best air conditioner for their home, Haier air conditioners offer a wide range of split models that combine cutting-edge technology, energy efficiency, and smart features to ensure maximum comfort while keeping energy costs down.

[sakhshimandal]

Air Conditioner Prices in India: Useful Insights for Potential Buyers

Air conditioners (ACs) have become a vital part of life in many Indian households, providing much-needed relief from the hot and humid climate. However, purchasing an air conditioner can be a significant investment, and with so many options available, it can be challenging to choose the right one that fits both your needs and your budget. Understanding the factors that influence air conditioner prices in India is crucial for making an informed decision. This article offers valuable insights into air conditioner pricing and the various factors that potential buyers should consider before making a purchase.

Key Factors Affecting Air Conditioner Prices in India

Type of Air Conditioner:

The type of air conditioner you choose has a significant impact on the price. The most common types available in India are window ACs, split ACs, and portable ACs. Window ACs are generally the most affordable option, starting at around ₹18,000 to ₹25,000. They are ideal for smaller rooms and simpler installations. Split ACs, which offer better cooling efficiency and a sleeker design, are more expensive, with prices typically ranging from ₹25,000 to ₹50,000 or more. Portable ACs, while convenient for mobility, often fall in a higher price range, starting around ₹30,000 due to their flexibility and additional features.

Cooling Capacity (Tonnage):

The cooling capacity of an air conditioner is measured in tons, which determines how much space the unit can effectively cool. Air conditioners with higher tonnage are designed for larger rooms and naturally come at a higher price point. For example, a 1-ton AC, suitable for a small room, typically costs between ₹20,000 and ₹30,000, while a 1.5-ton AC, ideal for a medium-sized room, can range from ₹30,000 to ₹45,000. Larger units, such as a 2-ton AC designed for bigger spaces, may cost ₹40,000 to ₹60,000 or more. It's essential to choose the right capacity for your room size to ensure efficient cooling and energy usage.

Energy Efficiency:

Energy efficiency is one of the most important factors to consider when buying an air conditioner, as it directly affects your electricity bills. In India, air conditioners are rated by the Bureau of Energy Efficiency (BEE) on a star rating system, with 1-star being the least efficient and 5-star being the most efficient. Air conditioners with higher star ratings consume less electricity, which can result in long-term savings on energy costs. However, these energy-efficient models also come at a higher initial price. For instance, a 5-star AC will generally cost more than a 3-star AC of the same capacity, but the savings on electricity bills over time can offset the higher upfront cost.

Inverter vs. Non-Inverter Technology:

Inverter air conditioners have gained popularity due to their superior energy efficiency and performance. Unlike non-inverter ACs, which operate at a fixed speed, inverter ACs adjust the compressor speed based on the cooling needs of the room, which reduces power consumption and provides more consistent cooling. While inverter ACs are more expensive initially, typically starting from ₹30,000 for a basic 1-ton model, they offer long-term savings on electricity bills. Non-inverter ACs, on the other hand, are cheaper upfront but may result in higher energy costs over time, making inverter technology a smart investment for those prioritizing energy efficiency.

Additional Features:

Air conditioners today come with various additional features that can affect the price. These features include smart connectivity (such as Wi-Fi control via mobile apps), air purification technology, dehumidification, fast cooling modes, and more. While these features enhance convenience and comfort, they also contribute to the overall cost of the unit. For example, an air conditioner with integrated air purification or advanced cooling modes will generally cost more than a basic model without these features. When deciding on these extras, consider whether the added convenience justifies the higher price for your specific needs.

Seasonal Pricing and Discounts

Air conditioner prices in India can fluctuate based on seasonal demand. The peak summer season often sees higher prices due to increased demand, whereas prices tend to drop during the off-season (such as winter months). Retailers and online platforms frequently offer discounts during festivals, end-of-season sales, and major sales events, providing an opportunity to purchase ACs at reduced prices. Keeping an eye out for these promotions can help you save money on your purchase.

Additionally, government initiatives aimed at promoting energy-efficient appliances may provide rebates or incentives for purchasing high-efficiency air conditioners. These programs, typically aimed at reducing overall energy consumption, can lower the effective cost of purchasing a 4- or 5-star rated AC.

Making the Right Choice

When selecting an air conditioner, it's essential to balance your budget with the long-term value of the unit. Consider factors like cooling capacity, energy efficiency, and additional features, as these can significantly impact both the upfront cost and ongoing expenses. An energy-efficient model with inverter technology may have a higher initial cost but can lead to substantial savings on your electricity bill over the years.

Ultimately, the right air conditioner for you depends on your specific needs and the size of the space you want to cool. By understanding the factors that influence air conditioner prices in India, you can make an informed decision that offers the best combination of comfort, efficiency, and value for your money.

[armorservices]

The Ultimate Guide to Air Conditioning in Kuwait: Staying Cool in the Desert Heat?

Welcome to Kuwait, where the scorching desert heat can be quite challenging. In this comprehensive guide, we will explore everything you need to know about air conditioning in Kuwait, from choosing the right AC unit to maintenance tips and understanding the local climate.

1. Understanding Kuwait's Climate: Kuwait experiences a desert climate, characterized by extremely hot summers and milder winters. The need for effective air conditioning is paramount to ensure a comfortable living environment. Mention keywords like "Kuwait climate," "hot summers," and "desert weather."

2. Choosing the Right Air Conditioning System:

Split AC vs. Window AC: Explain the differences, advantages, and which one suits Kuwait's homes better.

Inverter Technology: Discuss the benefits of inverter ACs in terms of energy efficiency.

BTU Calculation: Provide a guide on calculating the required British Thermal Units (BTUs) for your room size. Mention keywords like "AC system types" and "BTU calculator."

3. AC Installation Tips:

Proper Placement: Explain where to install AC units for maximum cooling efficiency.

Professional Installation: Stress the importance of hiring a qualified technician.

Maintenance Contracts: Discuss the value of maintenance contracts in Kuwait's climate. Use keywords like "AC installation tips" and "AC maintenance in Kuwait."

4. Energy Efficiency and Cost Savings:

SEER Ratings: Explain Seasonal Energy Efficiency Ratio (SEER) and its significance in reducing energy bills.

Energy-Efficient Practices: Share tips for maintaining energy-efficient cooling.

5. Regular Maintenance:

Cleaning the Filters: Guide on how to clean or replace air filters.

Annual Servicing: Explain the importance of yearly check-ups.

DIY Maintenance: Simple maintenance tasks for homeowners.

6. Overcoming Common AC Problems:

AC Not Cooling: Troubleshooting tips.

Leaking AC: Causes and solutions.

Unusual Sounds: What those noises mean.

7. Finding Reliable AC Services in Kuwait:

List local AC service providers.

Customer Reviews: The importance of checking reviews before hiring.

Warranty Information: Mention the importance of warranties and what to look for in them.

Conclusion: Staying cool in Kuwait's harsh climate is essential, and having a well-functioning air conditioning system is the key. By following the tips and information provided in this guide, you can enjoy a comfortable and cool living environment, even in the midst of the desert heat.

[householdappliances]

Window AC and split AC are two popular options to cool your home or office. Split air conditioners are typically more expensive than window air conditioners. Ultimately, the best way to decide is to consult a professional HVAC contractor. Browse the blog for more info.

[creylune]

AX ‘22 Con Report

I tabled at AX with my friend (no public social media) last weekend!! I’m sure most people saw tweets about how awful the artist alley conditions were lol... I’m doing this writeup mostly to reflect how sales went + for my own reference but I will also cover con organization, how it felt inside re:safety, masking, AX staff/volunteers. FYI this is very long as it’s a sort of blogging recap with lots of photos.

Here’s our booth! 👇

Day 0:

Setup day! I forget what time Kentia Hall opened for setup but we got to the convention center at like... 4:45-5PM. Getting into the loading dock (a garage directly connected to Kentia) was pretty smooth, luckily since we arrived a little late there was no wait for other cars ahead of us. A con center staff (?) driving a forklift gave us a cart to put our boxes etc. on. 

We weren’t allowed to park our cars in the dock, so my table partner had to go repark her car after we wheeled our merch to the Kentia rear entrance.

Here’s what the loading dock looked like (this was from Day 4, so it’s pretty empty).

Directly to the right is Kentia Hall.

Fortunately the staff at the Kentia entrance (between the loading dock and Kentia, normally closed during convention hours) was also doing COVID checks, so we got our COVID wristbands right off the bat. Setup took the entire 3 hours until 8PM. We didn’t finish either, but we got the basics set up (photo display stand for large prints, grids for charms/small merch). We just needed to add our side hanging prints (medium and mini prints) via a clamp-on side arm.  

I don’t think AC was on, so we were kinda sweaty and also tired/hungry from the 6+ hour drive down.

Here’s our original setup; we decided to move the “window” to one side so there’d be no break in our display (easier for customers to see all our merch at once). This is because we didn’t evenly split mine vs. her merch LOL. Other artists often keep their own stuff on one side if they split a table. Also we had a plexiglass screen because we were paranoid about non-maskers breathing on us. Neither of us got COVID from the con so I like to think it worked!

Day 1:

We tried to get to the con by 8:30 AM so we could get convention center parking and finish setting up before 10 AM (AA open) but there was a literal car accident + one that happened 30 feet from our car on the street leading to the parking garage 😑 My table partner had to drop me and our neighboring table (also part of our Airbnb) friend off on the street so we could walk the rest of the way inside lol.

We were both wary of customers stealing our display charms so we pinned our charms through the grids, then secured them on the back. We tugged on each charm to make sure they didn’t come loose.

Here’s Anya, my best-selling charm (or about tied with my Jack Frost charm). My memey-themed merch sold the best lol (not a surprise for me). The pin was stuck in there unless you really yanked it. Also, we used black grids because the contrast really makes the charm colors pop more (vs. white or a corkboard). We got the idea from our friend who uses black canvases. 

Some more pics of my merch (and our display in the background). You can see we had a Square payments sign + NO MASK NO SERVICE sign (we forgot to print one but the sticky note was enough). We used the top of the grids to display more 3D items like omanjuu plushies (we used two-tier displays from Daiso, inspired by Hinamatsuri displays), acrylic standees (a mini wooden bench from Daiso again), and my bargain bin (old charms) box. We tabled at Fanime in May and all our stuff was directly on the table, which was low and hard to see. Added height lets people see your merch from farther away. 

Personally I wish we displayed our stickers better but we kinda ran out of space. They’re not the main money makers anyways (charms and prints are) but oh well, they’re easy to ship/sell online.

And here’s what it looked like on the artists’ side:

AX volunteer staff is pretty strict about making sure the walkway is clear. Every few tables had personal trash cans, though whether they were emptied or refilled with another plastic bag was kinda dependent on luck...? Most of the time we just had our own personal trash bag we brought and disposed of after closing each day.

Luckily the volunteer assigned to our strip was SUPER friendly and nice. She stopped by our table every day starting Day 2; she reminded us to eat and stay hydrated because another artist had passed out on Day 1. I think actually more than one artist passed out in AA during the entire weekend 🙃 CO2 levels were off the charts especially on Days 2 and 3.

I didn’t get a photo of the actual back of our display, but we had organizers inside our grids so we could store handfuls of charms for quick access. In the past we’ve just hunched over and dug through our giant luggages to find charms when customers asked for them, which REALLY takes a toll on you and your back. We finally learned this year 🤡✨ You can see it jutting out in this picture. You can also see my medium/mini prints hanging (all taped) from the side arm.

We had an open box full of unorganized omanjuu plushies between our table and our neighboring table since we did a group order together. Most of the time I helped dig and grab them when customers wanted to buy them. It was kind of hard in the beginning because my table partner and I had 4 blonde characters LOL but we didn’t bother organizing them because they took up too much space and were too light (like packing peanut light) so they fell out of containers easily...

I would say the only downside of our main display setup is that one person (me) is always hidden by the grids, while the other artist is stuck doing customer service. To talk to customers, I had to stand up on my toes to talk over the grids, and it was uncomfortable because I also had to avoid our large prints that were hanging directly behind my head (when I stood up).

I think I generally had a more enjoyable time at Fanime because I was the one doing the majority of customer service, so I got to chat with customers more. AX I was mostly just... chilling... also there was no service and I couldn’t get onto the AA wifi because it was at capacity (people were sharing the password with their non-AA friends :) ).

This is also when we realized while the plexiglass kept us “safe�� from people breathing on us directly, it was also REALLY HARD to hear people. Voices are already muffled with masks on, and cons are LOUD. The plexiglass was thick so we literally could not hear almost every single customer. We either had to ask them to speak up multiple times or we straight up asked them to talk over our grids so we could hear what they wanted to buy. The latter making the plexiglass useless...

It was also tougher on my partner’s back because she’s 6+ inches taller than me (and was wearing heels lol). For me I just had to stand up taller, for her she actually had to scrunch her back to dodge our prints.

Here’s what it looked like from the Customer Service chair:

Anyways Day 1 sales were slow... even compared to Fanime 1 month ago it felt pretty slow. Not a huge surprise since it’s Day 1, most people will browse AA on Friday and then make purchases later during the weekend UNLESS you’re a super popular artist and people want to get your stuff before things sell out. Unfortunately neither of us are at that level lol

Also here’s a photo of my luggage under the table. This was taken on Day 4 during takedown so it has all the manjuus poured inside LMFAO

AC was either broken or on energy-saving mode (according to some staff?) this day so it felt like A SAUNA. It was humid and stifling. I was fanning my partner and my neighbor with an empty portfolio and shikishi board to help keep them cool. I didn’t feel terrible since my house doesn’t have AC (so I’m used to it) but it was NOT comfortable. This is the day that staff at the South Priority Entrance (for vendors, exhibitors, Artist Alley) apparently had miscommunicated instructions and were confiscating coffee, drinks, snacks, food from everyone. Luckily they hadn’t checked my bag when we got in in the morning, so I had snacks (KitKats, dried apples) and bottles of tea, but we didn’t eat lunch until 4PM (table partner and I split food truck fries).

Maybe it was the hunger but these fries were so so so good lol.

Day 2

We expected to get the most sales on this day but sales were also really slow considering it was Saturday... My partner also has tabled at AX multiple times in the past, and she said sales were disappointing for her standards. We wondered if it’s because we were at the back of the hall. 

I think my most popular mini print from Fanime (ACNH Timmy and Tommy going “Poggers!”) didn’t sell as well because it wasn’t directly in customers’ faces. At Fanime it was right above the seller’s “window” so while customers waited for me to grab inventory, their eyes would wander and immediately see it, then add it to their purchase. Or they’d see it front and center when they passed by the booth. This time we kept all smaller prints on the sides, so that may have impacted sales. It still sold the best out of all my prints though, but it didn’t sell out like it did at Fanime.

AA conditions-wise were better from Day 2 onwards, but it’s a fact that the AC is not strong in the back of the hall. It’s strongest at the entrance. I did fan myself during Days 2-4, Day 4 was the most pleasant because crowds were much smaller lol. Trying to get through or leave AA on Days 2-3 were a nightmare because of how jampacked the aisles were. Usually I would walk through the artist walkways just so I could avoid the crowds (at least 30% of whom were unmasked 🙃). Honestly it’s a miracle I didn’t get COVID considering how many bare faces I saw!!!!!! After attending Fanime, where it was like 99% mask policy adherence, AX crowds gave me hives... I take Norcal Bay Area masking for granted...

I think...? Because CO2 levels were so potent, I didn’t feel productive or want to draw commissions. At Fanime I took over 30 commissions across 3 days, like I was pumping them out every 20-30 minutes. At AX on Day 2 I took down my commission display and didn’t bother putting it back up until the next day because I just wasn’t in the mood. And it didn’t have anything to do with how much sleep I got (or lack thereof), I was not sleeping well during Fanime either lol. But 🤷‍♀️ who knows. Luckily I didn’t experience nausea, fatigue, dizziness, or headaches like other artists did. My table partner complained of headaches but she also does require more sleep than I do.

Day 3

Sales were the best on this day! By this point I realized I didn’t really draw enough popular series, but ngl I don’t care much about drawing popular things just for sales. My partner’s Luxiem/VTuber merch was selling like hotcakes.

Okay I’ll just speed through the rest lol

Day 4

I was hoping for a lot of last minute sales on this day but it was kind of slow. Overall AX this year was fairly slow for a lot of artists; I talked about it with other artists and friends who were tabling and we all agreed our sales were lower than we’d anticipated. Like we did well but it wasn’t as high as we wanted; we definitely ordered more stock than we needed to.

AA closed at 3PM, and we were hoping to finish takedown by 5PM. Unfortunately after we’d packed everything up + my partner had helped pack away some of her out of state friend’s boxes into her car... things got really disorganized and confusing. 

So my friend had parked in the Venice Parking Garage which is directly across the street from Kentia Hall/the south side of the convention center. The street between the two buildings was filled with cars and PARKED trucks. So normal cars that were exiting the garage were stuck and couldn’t move. No AX staff bothered to explain to these cars that the trucks were Exhibitor’s Hall trucks, and they were parked and waiting for the corporate vendors to bring their stuff down. My friend was stuck on that street for like... 15-20 minutes I want to say. I was stuck in a pretty much empty AA at 6:30PM with way too much stuff for one person to carry. The loading dock that I mentioned earlier in the post was also blocked off.

I briefly went outside to take pics of the street outside the loading dock (the street that my friend was trying to turn onto, so that we could pack our belongings) so I could show her what the holdup was:

All the trucks and cars in the middle/left lanes were parked. Driver-less. lol. 

These were cars trying to exit the South Parking Garage (directly inside the con center).

After I sent these pictures to my friend I ran back inside AA, noticed a forklift had kinda haphazardly discarded/dropped two rolling “carts” at the end of the aisle, and realized I was gonna have to grab one and put all our stuff on it if I wanted to move our belongings relatively quickly. These didn’t have handles, just a legit rope tied to it that you had to pull LOL

I felt kinda bad because there was an artist who had been sitting at her table for hours by herself, literally SURROUNDED by luggages. We started talking and it turns out she was confused because her boyfriend was in the same situation as my partner, stuck trying to get out of the parking garage. I told her she should grab one of the rolling carts to start loading her stuff too, since there were two that had been left a couple tables away from us. I didn’t wanna wait for a forklift because we had dinner plans lol.

Once I managed to wheel our stuff outside, I was still pretty lost on what to do, because my friend was around the corner and as versatile as the “cart” was, it could not go over curbs. Under the platform, there were two little mini wheel things on each end. They were not affixed so our stuff actually fell off when I tried to go up one curb (it was smooth but I made too sharp of a turn). Just imagine these things but more industrial looking

Two of these under the platform here 👇 on both ends

Another artist who was loading their car asked me if I needed help and I said I wasn’t sure since my friend was stuck on another street (literally like.... 200 feet away). They were kind enough to explain the situation, so I relayed it to my friend via Discord (basically, talk to one of the security people, explain that you’re an artist and not exhibitor’s hall vendor, and they’ll wave you through).

So yeah this was a pain in the ass and very disorganized but at least we made it to dinner on time-ish... 

Now on to general sales stuff:

Neither of my partner and I sold that many large prints, which was disappointing because 1) large prints are HEAVY and a pain to carry back home, 2) usually she sells a lot of them; large prints are good money-makers because the margins on them are really good. Of my prints I expected my Tokyo Mew Mew and Ib prints to sell the best, but disappointingly I only got 1 buyer for my TMM print 😕 It’s a little disheartening because it’s a nostalgia print, I put the most effort into it, and the reboot anime is now airing... but I guess AX was a few days too early, or I didn’t have it up front and center. I ordered 25 of them, definitely ordered too many.

Meanwhile my Power and Meowy print sold the best (14-15 sales, I ordered 20 which was a good amount). Which is funny because I put the least amount of effort into it; I literally was speed-shading her shirt at 4AM on a workday because the print order deadline was that morning. It was also an “eh this sketch can be a simple large print, let’s bank on Power’s popularity for this to do well” and it did! 🙏 What is a little weird is my partner’s Makima print didn’t do as well as she expected. She said she sold a lot of them at ALA earlier this year... I noticed my mini Makima print also didn’t do that well (I got like 4 sales). I’d wonder if it’s because Makima is controversial but people were buying my Makima charm (more people got my Power charm though).

My second-best selling print was Ib (7-8 sales, ordered 20)! I got more buyers for it on Day 1 and 3 iirc. I was pleasantly surprised because like the Power and Meowy one I was literally rush-coloring parts of it the morning of the deadline. Like actually it made me late to work lol. It’s actually unfinished 🙈 but it’s okay no one knows that...  I didn’t sell any of my P4 large print but that was to be expected because it was a last minute decision to print it; it’s old.

Charm-wise my Anya and Jack Frost “I’m gonna kill you” sold the best by far. I think in general, memey merch sells really well since people think it’s funny and want to show it off to their friends. So if all else fails, make some memey merch to ensure sales ^___^..... Surprisingly, people were not buying my partner’s SpyxFamily charms though, even though we placed our SpyxFam stuff right next to each other. It’s probably because her charms were huge, like 3 inch long/wide Christmas ornament size. It’s a shame because they came out super cute and had a cool transparent effect... But yeah, a lot of people bought my Anyas or the entire family set. I had two customers ask for 3-4 Anyas in one purchase which made me o_o LOL. I think it’s because I drew Anya’s iconic smug face on one side. 

A couple Dimileth people came out of the woodworks to buy my Dimitris which made me happy... also what surprised me was that NO ONE bought my Felix charm, whereas he was my most popular charm at Fanime. Really goes to show how demographics differ depending on the con. Most people bought Hilda and Hubert at AX... these are also my slightly messed up charms from a second charm order in early 2020, right at the start of the pandemic (so the manufacturer messed up on clasps and print quality was inconsistent). So I really wasn’t expecting to sell any of them lol.

Another disappointment: I don’t think I sold a single lollipop charm all weekend... and I really expected them to sell well :\ I checked in with our table neighbor and she said only her Anya lollipop was selling, the rest of them weren’t getting bought at all. We found this kind of weird since lollipop charms aren’t super common yet, so we expected they’d do better LOL. 

Bad photo of some of the lollipops:

On the flipside my partner’s candy bag charms were selling like crazy, but then again they were all Luxiem streamers so... her Gojo/Geto candy bag didn’t sell well. Probably because the ship hasn’t really come up in the anime yet.

All in all it was a pretty good weekend, I profited a bit over $1k after expenses (Airbnb, gas, parking, merch production costs, badge and table fee). This doesn’t include some tabling gear because my friend and I split (she bought the grids, the pins and their holders, the plexiglass, we borrowed a friend’s side arm thing, the display things I bought were all cheap minus the $50 main display stand).

Honestly that’s pretty low in comparison to all my artist friends who table at 3-5 cons per year, but I table really casually (this is just for fun) and I do more online shop selling, so I’m not too disappointed. I also didn’t draw any Genshin, didn’t have any SpyxFamily-heavy inventory besides a couple charms, didn’t have any VTubers, etc. etc... so I can’t complain about not making a ton of money. We were also tabled super far back, so we didn’t get nearly as much foot traffic as some other friends. HOWEVER we both avoided getting COVID so maybe our table location was a blessing. Based on an unofficial spreadsheet artists have been updating wrt symptoms and test results, there were positive clusters near the entrance (though people tested positive pretty much everywhere in the AA, including a table across from us).

To conclude, I hate LA and traveling to cons is more tiring than it’s worth personally, so I think I’m gonna stick to local conventions from now on. I am a tired introvert lol. I think Airbnb-ing with 8 people (all of us have dodged COVID miraculously) would have been more fun if I was still in college, alas I am now a few years out of school and very sleepy/prefer to keep to myself usually. I had way more fun at Fanime (I drove in every morning) and also didn’t constantly fear I was getting infected with COVID each day there... also didn’t witness a car accident every single day of the con... could relax at home and not worry about forgetting to pack something...

I hope this was useful or interesting to read if you made it this far  d( > _・ ) If you have any questions feel free to hit my ask box, though I can’t answer much about merch production because I did group orders via friends and some prefer not to share their manus.

[mallickshah]

Panther VS Enigma.

FRIDAY APRIL 16TH 2021 ; ATTACK ON THE ARMORY

PANTHER HAS CHALLENGED ENIGMA TO AN ACE FIGHT.

This had not been the easiest of paths to take. 

Mallick was stilled by the silence that subtlenly fell around them, they took turns facing Thaggard and his guards. Once he was facing the Ace, one of his comrades reached over, and the handle of a heavy weapon was passed from their grip to Mallick’s. He held on tight, his senses on the edge of something he’d only felt once before. When he’d been faced with his wife’s murderer, and the choice to avenge her or to let it simmer until the moment was right. The choice to take a life had never been one so heavily weighed in his mind prior to the tragedy that struck in his life. 

Because the choice had never crossed his path before hands, or had any right to be there. Fighting had always been to gain leverage, to become stronger, not to spill blood. At least not with the hands of the man he’d been raised to become, despite the wilderness of the faction where he’d been born. Mallick had never thought he’d ever let the scale tip from not ever considering taking the life of someone else being the worthy choice, to not even thinking twice about whether it was the right thing to do or not. His logical senses had decided that if Saiyah’s life was worth nothing to all, then the lives of all would be worth nothing to him. The radicality of it had struck him somewhere in between his last kill for the resistance and the fifteenth year of her death. His reputation had suddenly made it too easy for him to not consider that to keep those they considered antagonistic alive. 

Right now, Mallick was feeling like the last time he’d slid in the chambers of a target in order to make sure they never saw another morning. He felt dangerous, even to himself. The man standing before him, the guards behind said man, they might not be able to tell, and quite frankly if not for the way he was gripping the handle of the heavy blade weapon tightly, but firmly and without a quiver in his fingers, Mallick would not have been able to tell himself, which side of him was tilting the scale tonight. 

At least the Gods seemed to have been lenient when it came to protecting Thaggard and his men. It suddenly seemed as if they were weighing for Mallick to lose senses of not doing what was right by spilling blood, like he’d tried to think it was possible to do to solve this issue. As if they were whispering to him, with the fortune wheel of this operation that it was the worthy choice. Mallick advanced, the blade of the weapon dragging on the ground, and drawing with it a cloud of dust, lost in the shadows of the night. 

“Thaggard,” He said the name of the man, and hoped the silent threat was taken as lightly as it sounded, he hoped it was taken with the idea that it weighed nothing more than that of a feather, “The man who has managed to make a fool out of me, for believing you a capable Ace for our people.” 

Mallick had had hope, after all. Foolish, always treacherous, hope. 

Kol regarded him with narrowed eyes that matched the air between them, everyone else seemed to understand that something was shifting. The wind was not present, yet the air carried something akin to a sleeping storm, ready to rise and wreak havoc on whoever risked themselves to reach between the two men facing each other. The tension would cut straight through a vein and leave one bleeding without any hope of remaining alive. 

“Your faith is not something I seek, you’re nothing but resistance scum!” 

Of course, the man looked to have no remorse for the accusations Mallick had towards him in his eyes, and in the way the men around Mallick moved forward with him. Instinctively trying to tighten the circle around Kol and his guards. They let Mallick take a step further without moving though, this time Kol’s guards were the ones moving forward, as Mallick raised his weapon with a slow movement. The axe was heavy, the pointy side of it looking up to the sky, the sharpened blade facing Kol as he spoke gravely. 

“This resistance scum that I am, would make a better Ace.” 

To that Kol moved with intent too, his narrowed eyes turning into a frown. He looked menacing, and Mallick much prefered the idea of fighting him when he knew the man he was going to fight was the exact idea of the type of men meant to be taught a good lesson. The kind of lesson that might require them to raise a white flag, or choose between taking Mallick down or being the one erased from the map. 

“Are you challenging me?” 

However, when Kol asked this question, it hit Mallick of where his position and his words were taking him inadvertently. A position that he understood as soon as Kol’s words reach his side of the fence, Mallick realized he didn’t need to turn around to know that his men were waiting for him to confirm his answer in an affirmative tone. He didn’t need to take a look around to know what he’d said had clearly sounded like he was going to take the title of Ace away from Kol, and if he’d said so without thinking with his choice of words, it meant that he’d suggested that he’d be the best man to take that title away from Kol.

To do so, would also mean that Mallick would then wear the title. 

He stood a little transfixed by the way this event was transpiring, unexpected turns after unexpected turns, and here he was, at a crossroad, where it seemed the gods had once again made him speak in a way that he’d never anticipated. Mallick had always despised the way they had to surprise him at every turn in his life, these surprises had been growing in shock value, and in how they would change the path he’d been content to be on, too comfortable to leave, rather drastically. Almost as if they were never content when he was, as if they preferred him to always be shifting his gear, getting ready for the next mountain to climb.

As it was, Mallick never seemed to fail in letting them take the lead in his life. At times because he had no choice, at other times, because the choices he was given would all lead to the same outcome. 

So it was with great resignation that he sent a small prayer to Saiyah’s soul, as he lowered the weapon to the ground, only to slice through the earth and raise it, creating its own wind as it was lifted and held with both of his hands. 

“If that’s what it takes to stop you, then I am.” 

Kol too, found a fighting stance, a grin stretching his lips, almost from ear to ear. Clearly, the man was taking a sick pleasure in how things were turning out to be. Whatever the reason behind it, Mallick cared none. 

“I will take pleasure in taking your miserable life, and watching you suffer while I do so.” Kol’s fists took turns hitting the opposite palm, before one of his guards reached over to throw him a sword. The size of the weapon was not going to make Mallick underestimate his opponent, both men had lived long enough to be adept at handling themselves in any type of fight. He was going to assume he had to fight like he was going against the most barbaric of all fighters, because surely, Kol hadn’t managed to undertake the previous Ace by being a terrible warrior. Although, to see his guards step forward, as if to join in the battle that Mallick had assumed would be only one on one, made him question the integrity of the man. He didn’t have to worry about them though, his own men moved as well, showing signs that they would not hesitate to take down any and all of the guards. Arrows were quick to shoot in front of Kol’s guards as well, making them take a step back.

If it made Kol look more morose than before, Mallick pretended to not grin at it. Once this was all done and over, whatever the outcome, he knew he would have done all he could, in the name of the one person he would always love more than this life itself. 

Everything would always be for Saiyah. 

Kol roared, and launched, he sounded heavy, he sounded feral, as if the beast in him had corrupted the rest of his mind. As if even though it was hidden under the skin of the man he appeared to be, it was still the most prevalent aspect of his existence. He roared and charged and forced Mallick to step back. It made Mallick lose his balance, for quick seconds that would be crucial if he stayed put, but he was agile as the panther that laid dormant in him and slid his feet in the dust, turning to move to the left before Kol’s sword reached his head and risked splitting his skull from above. 

The strike that came next was Mallick’s move, but Kol was not hit, his sword was raised to counter attack and in doing so, the blade broke under the power of Mallick’s swing. Kol’s roar this time came from even deeper within his chest and Mallick knew before the dust dissipated to show the transformation, that the sound of the metal falling to the ground had announced that his opponent was opting to shift during the fight. 

Mallick would not do so, especially not after seeing the bear moving through the cloud of dust, now cleared up enough for him to be able to catch sight of the charging animal before it reached him. The earth seemed to tremble, Mallick seemed to scramble with ease but it took a great deal of effort to roll away from the bear’s attack. The animal stood on its rear hinds, and let out a few growls before looking for its prey again. Mallick this time was holding his arm out for the people behind him, so they could move back.

He would not take anymore deaths with him, not tonight, not by the hands of this enemy. 

The bear fell back on all fours, and once Mallick had a clear window and the advantage of speed over strength, he ran with his weapon raised, and he heard his own voice raising the dead as he charged with the intent to harm. The head of the bear turned to the noise, but Mallick would not stop in his hunt to carve through its flesh, and so he finished his sprint and slid right under the animal as it came for him, under its belly was where he found himself slashing a wound. 

It made the animal growl, and topple down for a few seconds. But Mallick had to catch his breath, unable to move further, he rose while leaning on the weapon, the sharp end of it lodged in the earth. Mallick used it as a cane to find himself back on his leg, standing and trying to gauge the damage he’d done. But it seemed, despite the bloody mess it left as it rose back to attack, the animal was still standing strong and charging. It effectively took Mallick by surprise, crashing into him and making him drop his weapon to the ground as the head of the bear sent him flying right into a wall. Mallick’s skull felt displaced, his surroundings turned foggy and distorted, a piercing sound made its way through his ears, and for a few seconds, he was both blinded and deaf. All he could perceive was the smoke of dust left behind by the animal, the wound the bear carried did have it catching its breath after the attack on Mallick. 

So both opponents were panting, Mallick holding his head down, and kneeling in the sand as he tried to get himself back together. It was an arduous task, the one who would recover first might be able to land the fatal blow. The victorious strike, and fortune seemed to smile at the animal, because the bear, panting as it was, was suddenly moving towards Mallick who still hadn’t managed to get himself back on his feet.

The urgency of the moment was not lost on him, despite his head aching in places he never knew existed. But Mallick kept stumbling as he tried to get up, he kept hearing himself, his own voice and that of Saiyah, chanting in the back of his ringing like the dead’s mind, get up, get up. Mallick tried with all of his might, he felt he might scream through the num feeling that was keeping him nailed to the ground, and he did, he screamed with all the strength and willpower he needed to get out of the way before the bear’s claws, swinging in the air and aiming for his head, managed to slice through him.

All it did was make him move weakly forward, right by the side of the weapon he’d been forced to abandon. But to have escaped the full force of the bear’s claws, did not mean he was left unscated. Mallick could feel a burning sensation of slashed skin, cut flesh, of blood dripping against his skin, right under his chin, he raised his fingers to touch where the claws had not managed to cut too deep. He’d moved away just in time, but not fast enough, and he still felt groggy. 

Mallick had a moment of wonder, to think about what he could be grateful for, if this was to be his last moment on earth. Of all the things he could have said to the people he loved, as he knelt, one knee in the dust, the other with his hand on it, his other hand blindly grasping the handle of his weapon. Mallick’s head was lowered, the fog behind his eyes was not clearing, but his breathing was catching up, steadying. The words he was thinking he should have given to Saiyah before her death, and the ones he wanted to give to his loved ones still alive; they were clogging his mind, and making him unable to focus on anything else but the pumping of blood to his head. The rush of it felt like the whoosh of the wind right before the rain was about to come forth.

The way it held itself still in his lungs, and Mallick loved taking a big inhale of it, waiting for the rain to fall and wash away Saiyah’s blood from his skin. Mallick couldn’t think, but the wood in his grip was solid, and the whisper of death was familiar, everything tangible in the metallic scent of his own blood made him zero in on one thing only. The pounding of the animal’s rage coming forward once again, this time, Mallick knew he would not be able to dodge. He’d lost too many precious minutes, he wouldn’t escape it, if he did not raise his weapon to make sure the bear did not reach him.

This time, Mallick knew it was going to be him or Kol. 

If it was up to him, and only him, Mallick might have let himself finally find out what laid beneath the whispers that death constantly slithered against his throat. Past the boundaries of a life he still cherished, despite its crucial missing component. But the silence was deafening, the bear’s paws was filling in his ears, the ringing was enraging and Mallick was suddenly lost in everything else but the stillness of time. He was moving with the rhythm of the racing bear, his legs wobbled slightly as he rose, but his throat held the cry of the night he’d always sworn to carry.

For Saiyah, and all those who like her, had never had anyone fight for them. Mallick rose, and took the weapon with him, when the bear was close to his skin and throwing his paws, reaching with his claws, he swung the only way he could in his position, his kneel turning his body and in turn making the weapon swirl in his hold. Mallick heard more than a slash this time, the blood splashed, the splattering sound it made was drowned out by the sputtering of something less animalistic, and more human. He wasn’t certain of where exactly the fatal wound landed, but he knew it had because of the gurgling noise he could hear from behind. 

Mallick had had nightmares of that sound,  the way one could choke on their own blood, as they perished, and how the flesh was more mush than tight elastic. He knew without looking, that the bear was no longer there, and Kol was the one falling on the ground. Mallick could not look, all he could do was blink at the dust in his eyes, the sweat mixing in and irritating his sight. Mallick could only take one last breath in, before he was toppling over and meeting the ground beneath him. Although, he did not do so without the sting behind his eyes confirming that his tears had managed to once again, come forth with the familiar touch of death, once again caused by his own hands coming to greet him. 

Two bodies laid on the ground, one with no sign of life, torn clothes from the shift. 

The other holding on by a threat, with blood, sweat and tears pooling in the sand. 

Each party was quick to move to gather their leaders. Mallick was held by a man, thrown over a shoulder as they each silently accepted what had needed to be done had been done. Those who would mourn, were quickly left behind as the vanguard retreated back in the shadows, the escape made easy by the distraction of the Ace’s corpse turning into more of a preoccupation than the resistance’s presence, or how he came to die. 

One could only wonder what kind of day tomorrow would turn out to be.

[shivam2344]

Voltage Stabilizers for AC 1.5 Ton

"The vast majority of the People say that there is no need of Stabilizers for Inverter AC's",

Truly I concur with them, the greater part of the marked Air Conditioners have their own Inbuilt circuit which adjusts voltage vacillations productively. Yet, as we Indians must realize that there is no precise measure of current, voltage was provided to our home. more often than not particularly in Summer we can see expanded force drops, voltage vacillations. These variances might be seen straightforward, however the genuine danger is for your significant TV, AC, Fridges, Washing Machine, PC's other electrical apparatuses.

"On the off chance that the Input voltage run goes past 90 V to 300 V Range, there comes the genuine issue for Air Conditioners. If so in your region then you should purchase an ideal stabilizer for your AC."

Alwys take care of your home appliances well otherwise their durisability will be short. Air Conditioner always need a stabilizer whatever Brand Ac belongs to it does not matter. Voltage stabilizer is must.  

For what reason do we need Stabilizer for Inverter AC?

In a general sense Inverter AC's Dont require any extra Voltage stabilizers and Inverter Air Conditioners are exorbitant however. On the off chance that the voltage Fluctuation is excessively high, Then there is a Higher chance of PCB harm. extreme spike in current harms the significant functionalities of AC which decreases the existence time of your important Appliances. Particularly in India a large portion of the individuals want to have the best Inverter AC stabilizer to safe gatekeeper their Inverter AC, If they face most exceedingly awful force flexibly in their region.

How To Choose the best stabilizer for AC?.

 This is one of the normal speculation, First of all break down what's your prerequisite. better to think about AC includes consummately. On the off chance that you have a 1.5 Ton AC you can have normal capacity(4 Kva) voltage stabilizer. In the event that your AC has around 2 Ton, at that point we need according to that. I will clarify you unmistakably with a table. The better stabilizer

Info Voltage Range: 160-260V/140 – 280 V/90 – 270 V

Yield Voltage Range 220+-10%

0.7 Ton or 1.5 Ton A.c. 4 Kva Stabilizer

2 Ton A.C. 5 Kva Stabilizer

2.5 or 3 Ton AC 7.5 Kva Stabilizer

How does the single booster stabilizer varies from the double booster stabilizer?

"Not just these parameters. We will pick the best Ac stabilizer brandwise utilizing different parameters of every single brand"

Voltage and Power Consumption of AC Voltage Stabilizer-min

voltage stabilizer for all home needs,check around here. In the event that you came to check for best TV stabilizer, look at this connection.

Moto of This Article "Air conditioning Stabilizer"

For what reason Do we need remarkable stabilizers for Different AC's?. Each Air Conditioner brand has its own one of a kind circuit plan, Processors, PCB's, Cooling Technology. To be clear, If an AC accompanies another element. at that point there is no uncertainty it has a one of a kind structure of PCB plan. Like shrewd Voltage stabilizer marks as well.

"With the goal that we have taken an enormous activity to give the most appropriate Stabilizers to your own novel Air Conditioners. we made total examination and we tested the best marked stabilizers with the top marked AC's."

To give the best outcomes to you. we may give the examination report to you however. be that as it may, it is convoluted and extreme to comprehend distinctive circuit plans. no concerns I have accompanied a not too bad looking correlation tables for every single brands of Indian industry.

( we are appreciative to the marked showrooms(eZone) of Bangalore, who helped us with our examination)

In the event that you require stabilizer for all your apparatus, a solitary mainline stabilizer will do the enchantment for you. purchase a mainline stabilizer which can ensure your total home apparatuses, which is cost proficient, gives across the board highlight.

Let Us get into your enormous rundown of AC stabilizers that was particularly implied for Your AC.

1.5 Ton AC stabilizers VS 2 Ton AC Stabilizers

Why we need an alternate stabilizer for 1.5 and 2 Ton AC?. We all unmistakably realize that 1.5 ton air conditioning and 2 ton AC are finished extraordinary, similar to astute we need an alternate stabilizer for both 1.5 and 2 AC. with the goal that I have rattled off the best AC stabilizers for 1.5 ton and 2 ton air conditioning stabilizers.I will clarify you plainly in coming points.

→1.5 Ton AC stabilizers-[Requires 4 Kva stabilizers]

 2 Ton AC stabilizers-[Requires 5 Kva stabilizers]

choosing the AC stabilizer dependent on tonnage is extremely significant. in view of tonnage just the voltage necessity changes. with the goal that you can even discover in all AC stabilizers, they have referenced the tonnage of AC. The circuits will be structured according to the limit of Air conditioners. the accompanying rundown depends on 1.5 ton AC brands and its best coordinating stabilizer brands. pick one for your image. I have arranged a major rundown for → 2 Ton AC stabilizers likewise, I have recorded this dependent on brands, highlights, costs and so on.

V Guard (Inverter AC) Best Vguard AC Stabilizer for 1.5 ton AC

Buy here -  V-Guard VG 400 (170V – 270V) Copper Voltage Stabilizer for 1.5 Ton Inverter Split AC(Air Conditioner)

V Guard (Inverter AC) Features

Capcity 12 A

Time Delay ITDS 3Min ±20 sec

Info Voltage 130 – 280 V

Reasonable for Up to 1.5 Ton

Mount type Wall

Execution Feature Smart Digital display,Time Delay System

Warranty 3 years

Phase 3

Booster Single

Auto Restart yes

Curl/Wire Copper/Aluminum

Is it Worth Buying ??

This is a most regular prerequisite for all Inverter AC clients. Inverter AC's now accompanies inbuilt stabilizers, So Inverter AC requires stabilizers if there is most pessimistic scenario situations. So we need a stabilizer which is for more better than Inverter AC stabilizers. So this will be the best Inverter AC stabilizer which accompanies hard core limit. The yield of this stabilizer is progressively exact and most significant thing is, "This item is extraordinarily intended for Inverter AC's, So if this is the prerequisite you can go for this rich stabilizer.

V Guard VG 500 Best Vguard AC Stabilizer for 2 ton AC

Buy on Amazon

V Guard VG 500 Features

Capcity 15 A

Time Delay ITDS 3Min ±20 sec

Information Voltage 170 – 270 V

Appropriate for 1 AC (Up to 2 Ton)/24000 Btu/Hr

Mount type Wall

Bureau Material ABS

Warranty 3 years

Phase Single

Wire Aluminium Wired

Weight 3.99 kg

Technology Zero cross Detector

Is it Worth Buying ??

We as a whole realize that Vguard is the stabilizer lord in India. Let me let you know there are a few AC stabilizers in vguard which gives extraordinary highlights and it is a significant rival in India. In the wake of looking at all AC Vguard stabilizers I have chooesed VG500 AC stabilizer for 2 ton AC. This stabilizer fits for all brands and keeps up steady voltage in the vast majority of the cases. This stabilizer has pulled in many clients and it is famous for its notable abilities. I have a twofold approval for this AC stabilizer which may cost you beneath 2k.

Microtek EM5170+ Best MicroTek AC Stabilizer for 2 ton AC

Buy on AMAZON

Microtek EM5170+ Features

Information Power 170 V – 270 V

Yield Power 220VA±5V

Display LED

Protection Under Volt and Over volt Protection

Technology Save Power Technology, Smart Time Delay

Mount type Wall

Coil Copper Winding

Warranty 3 years

Weight 5 kg

Auto Restart yes

Is it Worth Buying ??

Microtek is one of the notable stabilizer brand, however the thing is we need to know the best stabilizer for AC. in the wake of contrasting all Microtek stabilizers I discovered this stabilizer stays on the top for 2 ton AC. In the event that you are Microtek darling and have 2 ton AC to associate, at that point this stabilizer is the best to purchase for now. Microtek EM5170+ AC stabilizer is the best in sparing force.

Microtek EM4160+ Automatic Voltage Stabilizer for AC up to 1.5 ton

→Buy On Amazon

Activa 4 kva/165 290 Specification

Rating 5 star

Yield Voltage 195 – 245 V

Information Voltage 165 – 290 V

Phase 1

Mount type Wall

Max Power Handling Capacity 4000 W

Spike Suppressor yes

Circuit Breaker yes

Excursion Delay yes

Working Temp 0 – 50 deg C

Material knife ####

Body Sheet Metal Powder Coated

Warranty 2 years

Twofold ball bearing yes

Motor 100 % copper winding

Is it Worth Buying ??

The greater part of them may not know about this Ac stabilizer brand "Activa". In any case, This is an inventive Stabilizer which suites better with Haier Air Conditioner structures. Haier Air conditioners has the accompanying included circuit stream. The inward structure of Haier AC has an Auto Restart circuit, Aluminum and copper condensers which requires profoundly qualified Toroidal technology(coil development of the transformers which gives polymetric current stream). Activa Voltage stabilizers gives steady force flexibly and guarantees smooth usefulness of Air conditioners. In our exploration we discovered This Acitva voltage stabilizer was the most ideal counterpart for Haier AC. other marked stabilizers like Vguard, Microtek may not be that much reasonable for Haier AC. Activa AC stabilizer utilizes most recent IC innovation which wont transmit that much and gives less warmth. This Ac stabilizer gives 13 Amps which is an ideal counterpart for 1.5 ton Haier split and window AC.

Microtek EM4090 Best Stabilizer fo Voltas 1.5 ton AC

→Buy On Amazon

Microtek EM4090 Features

Info Power 90 V – 300 V

Yield Power 220VA±5V

Display Digital

Protection Under Volt and Over volt Protection

Technology Save Power Technology, Smart Time Delay

Curl/Transformer Copper/Aluminum

Booster Triple

Phase Single

Mount Type Wall

Warranty 3 years

Weight 14 kg

Is it Worth Buying ??

Voltas is one of the main AC supplier. the vast majority of the Voltas AC accompanies inbuilt balancing out limit. utilizing an outside AC stabilizer for Voltas AC hinders the startup time. On the off chance that there is poor force gracefully, at that point there is no utilization of value AC or Inverter AC. Voltas Air Conditioners may not endure extreme voltage change. Voltas AC are sufficient before they harm. be that as it may, once if there is any harm occured in view of intensity vacillation, in come cases the harm can't be recouped and it gradually begins to fix much of the time. which makes immense lose of cash. in any case, no concerns forestall it before the issue emerges. I have given the businesses best voltage stabilizer for Voltas AC. This Microtek AC stabilizer is tad expensive. In any case, it secures your expensive voltas Air Conditioners. It is unequivocally prudent to utilize quality AC stabilizer so as to shield from voltage change.

Microtek Em4130 Best Stabilizer for Whirlpool 1.5 ton AC

→Buy On Amazon

Microtek Em4130 Features

Info Power 130V to 300V +/ - 5V

Booster Double/span>

Protection Low and High Voltage cut off

Mount type Wall

Warranty 3 years

Weight 8.3 kg

Is it Worth Buying ??

MicroTek EM4130 AC stabilizer was uncommonly intended for AC. Why I Choosed this microtek EM4130 AC stabilizer for 1.5 ton Whirlpool AC, there is a solid explanation behind picking this stabilizer. This Microtek AC stabilizer has a sharp low and high cut off protcection which is very essentical for entangled circuit structures of whirlpool. This Microtek AC stabilizer end up being the best for Whirlpool AC. The complete circuit was essentially implimented utilizing Intelli Microchip. The condensers and auto start circuits of whirlpool needs a productive stabilizer, which was accessible with Microtek AC stabilizer.

Microtek EM4150 Best Stabilizer for BPL 1.5 ton AC

→Buy On Amazon

Microtek EM4150 Features

Info Voltage 150 – 280 V

Mount type Wall

Curl/Wire Copper Winding/Aluminum Winding

Show Type Digital

Twofold Booster Boosts 30 V

Warranty 3 years

Phase Single

Time Delay System Time deferral of 3 mins

Is it Worth Buying ??

This Ancient BPL AC models doesn't have resistant to substantial vacillation which unquestionably requires an even stabilizer. For BPL AC I propose you Microtek EM4150 AC stabilizer. I emphatically guidance you to utilize this AC stabilizer as it is a Double sponsor stabilizer which adequately underwrite the information voltage and give productive ease of use of AC. It has a force sparing innovation which auto switch now and again. So that BPL stabilizers require progressively unique stabilizer. with the goal that I am demanding this AC voltage stabilizer for your 1.5 ton BPL AC.

Screen 4 KVA Best Stabilizer for Hyundai 1.5 ton AC

→Buy On Amazon

Screen 4 KVA Features

Capcity 12 A

Time Delay ITDS 3Min ±20 sec

Info Voltage 170 – 270 V

Reasonable for Up to 1.5 Ton

Mount type Wall

Coil Copper Winding

Generator compatibility yes

Attachment Type 3 pin

Warranty 3 years

Phase Single

Weight 2.5 kg

Flood Protection yes

Is it Worth Buying ??

This Spicy Hyundai Air conditioners for the most part ward of outside stabilizers for power adjusting. So I have taken screen 4 kva AC stabilizer which has a working scope of 170 to 250 v gracefully limit which will be all that anyone could need for 1 ton to 1.5 ton AC.

Screen 4 KVA Best Monitor Wall Mounted AC Stabilizer for 1.5 ton AC

→Buy On Amazon

Screen 4 KVA Features

Capcity 12 A

Time Delay ITDS 3Min ±20 sec

Information Voltage 170 – 270 V

Appropriate for Up to 1.5 Ton

Mount type Wall

Coil Copper Winding

Generator compatibility yes

Fitting Type 3 pin

Warranty 3 years

Phase Single

Weight 2.5 kg

Flood Protection yes

Is it Worth Buying ??

I have looked for the best divider mountable stabilizers which is a significant necessity for the majority of the houses. I discovered Monitor Ac stabilizer will be the best stabilizer for this kind of necessity. you can purchase this stabilizer at a tolerable value today on the web.

[wirekhoj]

#electrical #electronics #electrcian

[arihantsaleselectronicsurat]

15 Things Everyone Must Know While Buying Air Conditioner

In a nation with a tropical environment, such as ours, the daily mean temperatures are steadily rising. Spending on a high-quality air conditioner like a Amstrad 3 star fixed speed ac online can be a wise investment. Today, air conditioners are an indispensable component of our everyday lives. When it comes to human health, heat has severe effects, which makes the use of an air conditioner essential, and the purchase of a high-quality air conditioning system a wise financial decision.

A variety of variables, including price, energy efficiency, and cooling capacity, influence the performance of air conditioners. The introduction of new technology has resulted in increased healthcare benefits as well as increased energy efficiency.

The market is overflowing with many choices from electronics shopping websites and stores to pick from. For a client with no previous expertise, choosing the most appropriate air conditioner may prove to be a time-consuming endeavor.

Here is a list of suggestions and considerations to keep in mind before making a final decision on the best air conditioner like Amstrad 3 star fixed speed AC online-

Tonnage is a term used to describe the cooling capability of an air conditioning system, with one tonne known as the amount of heat needed to melt 1 tonne of ice during 24 hours and is expressed in tonnes per hour. Choosing the proper tonnage of air conditioner for your space is critical. A 1-ton air conditioner is more than enough for areas less than 130 square feet. A 1.5 tons air conditioner, on the other hand, is best for cooling a room that is about 185 square feet in size.

Split vs window: which is better? Window air conditioners are often less expensive and simpler to install than split air conditioners. However, they are much louder when compared to split air conditioners. Split air conditioners provide more excellent air dispersion, are more aesthetically pleasing to look at, and cool more quickly than other types of air conditioners.

The size of the room- Room size is essential while selecting the size and capacity of the air conditioner from an online electronics store. Make sure you choose an air conditioner with the appropriate cooling capability for the amount of space you have available.

Installation: It is critical to ensure that your air conditioning equipment installation is correct to get the most out of it

Noise control - Noise is a highly essential factor to consider when purchasing an air conditioner. Each air conditioner has a noise level of operation. In an ideal situation, the noise levels should be less than 50dB.

Energy efficiency: Energy efficiency ratings for air conditioners, known as EER ratings, are provided by the Bureau of Energy Efficiency and are based on star ratings (BEE). All air conditioners come with an energy-efficiency rating label.

Inverter technology: An inverter air conditioner is well worth the investment since it provides more constant and excellent cooling while also being more energy-efficient. Inverter air conditioners are a bit more costly than conventional air conditioners. Still, since they use one-third less energy than non-inverter air conditioners, the money you invest will be recouped in roughly two years' worth of electricity bill savings.

Air quality: It is important to consider indoor air quality while installing air conditioners in the house since air conditioners equipped with a suitable filter effectively improve indoor air quality. A good filter guarantees clean air and improves cooling performance and energy efficiency.

Condenser coils: For cooling the air, air conditioning condensers utilize locks. Copper coils are preferred because they cool more quickly, are easier to maintain, and have a longer lifetime than other materials. These coils perform better in terms of heat exchange and anti-corrosive characteristics as compared to aluminum coils.

Filters that are simple to clean: Keeping the filter clean may result in energy savings of up to 5-10 percent.

Cost and Technology: Although today's air conditioners are jam-packed with features, it is essential to select an air conditioner equipped with technology tailored to the user's requirements. Consider sticking with a well-established name that offers all of the necessary features at a fair price.

Warranty Consideration: At times, few air conditioners come with lengthier warranties than others. When purchasing a new device, look for information on their website. Also, inquire with the store about the warranty for that particular model and manufacturer. Always consult reputed online electronics stores or physical electronics stores.

Arihant Sales offers a wide selection of air conditioners, all of which are of the highest quality. 

In addition to the considerations above, you should consider the brand's history, after-sales service, and the overall quality of its maintenance before purchasing an air conditioner. An air conditioner is a complicated piece of equipment that requires periodic maintenance by trained technicians. If the brand of air conditioner you are contemplating does not have a good service network or provides bad after-sales service, you may want to explore choices.

Arihant Sales is among the best electronic shops in Surat that deal in Mitsubishi inverter AC, Amstrad inverter Ac and more

[dotexts]

Best Portable Air Conditioner to Stay Cool Wherever You Are ...

When the heat hits hard, his thing is to have an air conditioner or air conditioning at home ... but this is not always possible.

The classic AC splits are a good proposal, but they are expensive and require installation work, something that involves asking for permits and an extra investment. Also, if you are in a rental home, it is very possible that the owner does not want to take charge of that investment.

So what can you do? The solution to your problems is a portable air conditioner for three basic reasons:

It is  much cheaper than fixed installation AC .

If you install it on the window,  you don't need to do any work .

If your rental contract runs out, or you are spending a season in another house,  you can take it with you.

If you are thinking of buying a portable air conditioner, we have prepared a comparison of the best models on the market to help you make a good decision. To give you more options, we have also included an air cooler.

At the end of this article you will find a complete buying guide that we recommend you read, so that you are very clear about what features you should assess before buying your portable air conditioner.

Guide to buying the best portable air conditioner

Are you preparing your home or office for when the high temperatures begin? Buying a device that helps you get through the warmer weeks of summer is usually the solution. But which?

Portable air conditioners are a good option for basically three reasons:

They are reasonably priced (fixed devices are much more expensive).

They do not require work to be installed (although some adaptation does).

You can move them when you need them (with some nuance that I explain below).

Another option that many users choose are air coolers, also (wrongly) called air conditioners in some guides. It is not the same as a portable air conditioner and sometimes there is some confusion.

To make your task easier, we are going to explain what you have to take into account to choose the portable air conditioner you need (and not screw up with the purchase).

Is it a portable air conditioner for you?

It is the device you need if:

Your apartment is for rent and you don't want to carry out a fixed installation.

You have a limited budget.

You need it for a second home that you do not frequent much, where air with better benefits is not necessary.

You have a small office or business premises.

You live in a building where the community does not allow the installation of compressors outside.

In any of these cases, it is a good option.

Types of air conditioners

To buy well, the first thing you have to decide is what you want. So I'm going to give you a quick summary of the types of air conditioning that you can find in the market:

Split: composed of two pieces, a quieter and more compact interior, and an exterior compressor that is the one that produces the cold (or heat) and where the noise is generated. They need professional installation and are priced higher. They also have more cooling capacity.

Window: composed of a single piece. They are cheaper than split and also louder (the compressor is integrated). To install them you have to make a hole the size of the device to fit it, usually under a window.

Laptops: they are the protagonists of this guide. They consist of a single mobile device (they usually have four small wheels), plus a hose with an outlet to the outside. They are compact and inexpensive and their main advantage is that they do not require installation.

There are also other, more complex types of air conditioning that use hidden ducts in the walls or in false ceilings, but we are not going to get into them in this guide.

Finally, I want to name you air coolers (also called evaporative coolers ) because they are another option that you can consider. These are devices that cool the air by evaporating water.

And why do I put them apart and not with the others? Well, because, and this is important, the air cooler is not an air conditioner, but a kind of fan with a humidifier.

Portable air conditioner vs Air cooler (or evaporative cooler)

Indeed, they are two different types of apparatus. However, it is quite common for users looking for a device with portability to confuse them ... and then get disappointed.

When in doubt, there is a basic key to avoid mistakes:

An air conditioner always has an outlet to the outside. If the device you are going to buy does not have it, then it is NOT an air conditioner.

And what is? Well, another type of device that, in all probability, fulfills its function, but does not cool as much as an AC.

What is an air cooler?

It is a household appliance whose external appearance is quite similar to a portable air conditioner. However, for it to work we just have to plug it into the mains. Nothing more.

Unlike a normal fan, which only sets the air in motion, the cooler cools the air using steam.

[householdappliances]

Choose Between - Window AC vs. Split AC Which Is Better

When deciding between Window AC and Split AC, factors like capacities, designs, prices, aesthetics, and practicality of use all come into play. Window air conditioner requires more space than split ac. Watch the video for more info. 

[robinsaha]

To get the best product in this world , where every company is trying to sell you their products,We need to make informed decision . Informed decision comes only when we understand everything about the gadget that we are buying. We have written this Air conditioner Buying Guide – Windows vs Split AC which is better for everyone who plans to buy AC soon and wants to know all pros and cons of different options available to him.

[newsztv]

Split AC vs Window AC

With summer season fast coming near and AC deals galore, you could find your self wondering, “Which AC is higher, window or cut up?” Knowing the answer to this question is extremely crucial to making the right purchase choice and doing all your studies can also maintain you from spending unnecessarily. However, to definitely apprehend the difference among cut up and window AC gadgets, you’ll have to find out about greater than just their charge points or set up.

Or a comprehensive clarification that solutions the question, “Which is better, window AC or break up AC?”, maintain analyzing.

Difference Between Split AC and Window AC Picking either a window AC or split AC may be quite the venture and it is crucial to realize all you can approximately the variations as it can have an effect on extra than just the fee you pay. Here’s all you want to recognize.

Make all your purchases with the Bajaj Finserv EMI Network - Check your provide

Price Price is the primary aspect that distinguishes the 2, and that is why it is vital to have a hard and fast price range. Depending for your finances, you can pick out the type of AC to go together with as it is vital to additionally account for set up and preservation. Typically, within the window AC vs cut up AC rate war, a window AC is a inexpensive version for the same tonnage. This similarly extends to protection as well, as here too, the costs are lower for window ACs.

Space Requirement The maximum substantive window AC and break up AC distinction lies in the area requirement. Window ACs commonly require a huge quantity of area because the entire equipment is simply one unit. This method which you need to either designate a full window or make changes to a wall to house the AC. However, in terms of a break up AC, there are two separate gadgets that may set up on both aspect of the same wall, providing you with a few amount of flexibleness.

[toptrendinglifestyle]

Air-conditioner buying tips and guide will help you get the best Deal in India. https://ift.tt/2IgV6LN

Air-conditioner buying tips and guide will help you get the best Deal in India.

7 bullet Point Step need to understand before buying or Finding Online-Offline Air Conditioner in India.

1) Before You Buy Understand 3 Tips.

Capacity

1) Small Room 1 ton AC 2) Medium Room 1.5 ton AC 3) Large Room 2 ton AC

Copper Coils

Copper Coils perform better than Aluminium.

Pay For Star

more Starts = more efficiency

"That's What You need before you Buy."

2) Choose Windows AC v/s Split ACs

See Top best Split ACs Reviews in Amazon India

See Top best Window ACs Reviews in Amazon India

While Split ACs are Priced Slightly Higher than Window ACs

The below Table Compares Them on Key Parameters.

Choose best Key Parameters Windows AC vs Split AC in India.

3) Room Size.

Apart from the room Sizes mentioned below, few factors that might require you to select a higher Capacity Unit have been mentioned below.

Multiple Window: If the room has multiple or Large Window.

Floor: If you house is Located on the Top floor or is higher than the 3rd floor.

Room Temperature: If the normal temperature of the room is above 40 degrees C.Facing: If the AC is facing West Or South.

See Top best Small rooms ACs Reviews in Amazon India.

See Top best Mid Size rooms ACs Reviews in Amazon India.

See Top best Large rooms ACs Reviews in Amazon India.

4) Energy Star Rating. more Star = more efficiency.

Power Consumption

The bureau of Efficiency (BEE) has a star rating methodology called Indian Seasonal Energy Efficiency Ratio (ISEER) for Air Conditioners. ACs with higher star rating will consume much less power, thereby, saving money on Your Electricity bill in the Long run.

Energy Star Rating

Higher Star rating cost a bit more initially but consume much less power and hence save more money on your electricity bill in he long run, Compressor material in the AC also contributes to energy consumption. Compressors made of copper are more energy efficient than aluminium ones. Below are estimated calculations on power Consumption for a 1.5 ton capacity AC. Values will vary for other capacity & ISEER rating combinations. ** Below table show the expected saving on buying Split ACs with 3 or more energy star ratings. Values given are basis ISEER energy label on 1.5 Ton Voltas ACs (for 1600 hours of Operational) & electricity charges of Rs.6 per Unit. Kindly note that non-inverter Split ACs do not come in 4 and 5 energy rating.

Save on your electricity bills | Pick an energy efficient AC

See Top best 5 star ACs Reviews in Amazon India

See Top best 4 star ACs Reviews in Amazon India

See Top best 2 &3 star ACs Reviews in Amazon India

See Top best all star ACs Reviews in Amazon India

5) Aluminium or Copper Coil.

See Top best Copper Coil ACs Reviews in Amazon India.

See Top best Aluminium Coil ACs Reviews in Amazon India.

Aluminium or Copper Air Conditioners provide a sigh of relief during the treacherous summer heat. But deciding the type of air conditioner which doesn't hurt your pocket could be an uphill task. Apart from the other factors that determine which type of air conditioner is better, there is an age-old debate as to which type of coil is better- Copper or Aluminium?

Characteristics of Copper or Aluminium in Air Conditioners

Copper coils

Copper coils

AC condensers use coils to cool the air. Copper coils popular as they faster, are easy no maintain and have a longer lifespan.

While copper coils are generally more expensive, they have better heat exchange & corrosive properties and are preferred in coastal areas, aluminium coils are relatively cheaper in comparison.

6) Inverter or Non-Inverter?

What is Inverter Technology?

It's a compressor that thinks and adjusts according to your needs. The compressor has variable speed and Changes its frequency according to the surrounding temperature. If you're looking for a long lasting, more energy efficient AC, it is worth Investing into.

Advantages of Inverter ACs:

Reduced Electricity Bills - 'Inverter ACs consume lesser power as the compressor does not have to frequently reach maximum cooling speeds.'

Consistent Cooling - 'The Compressor varies its speed for optimum cooling.'

Long Lasting - 'With lesser load on the compressor, You can expect a longer lifespan.'

Benefit of 'Inverter' Split ACs over 'Non-Inverter' Split ACs.

Benefit of 'Inverter' Split ACs over 'Non-Inverter' Split ACs.

7) Special Futures In ACs

Smart ACs

Top best Smart ACs Customer Reviews at Amazon India.

Smart AC's

Wifi enabled ACs or smart ACs as they are polularly called are empowered to take voice commands and are designed to operate intuitively. With next generation Voice- controlled technology, these ACs are compatible with amazon Alexa devices and can operate on voice commands, backed by internet of things (iot) technology. The WI-FI connectivity gives you the comfort of operating your AC remotely. You can remotely control or Pre-Programme your AC to set a temperature and cooling schedule as per your Wish.

ACs with Adjustable Capacity.

These ACs have a unique adjustable mode which can run on different capacities depending on number of people and ambient weather conditions.

ACs that cool at 52 degrees Celsius.

These ACs provide better cooling performance at higher Tempreture.

Acs with antibacterial Coating.

The micro dust anti-bacterial filters in these ACs keeps out both visible, Invisible dust and other pollutants and there by provide cleaner air.

Hot and Cold air Conditioners

Hot & Cold air conditioners deliver comfortable air throughout summer, winter and monsoon. They have the latest technological upgrades like Dual Inverter Compressor, active energy control etc which ensures cool air in summers, warm air in winters and dryer air in monsoons.

[airconditioningsydneyranklo-blog]

Which One To Purchase: Home Window Air Conditioning Vs Split Air Conditioning

Whether to buy a home window air conditioner or a split air conditioner when thinking about an air conditioning device is mostly down to where you wish to situate it, the looks as well as budget plan. Both options have their benefits and drawbacks which need to be taken into consideration very carefully to ensure you obtain a suitable a/c.

What is Window A/c Unit?

A single unit frequently best matched for smaller areas, they are located in a window or an opening in a wall surface. They are mounted with one face outside and also one face inside the space. The outside encountering device launches hot air while the within dealing with part of the unit sends out cooler air into the room. The dimension of a window air conditioning depends on its capacity, the greater the ability the larger the unit. Because of this, the home window ac is just readily available as much as a 2 lots capacity.

 What is a Split System A/c?

A split system ac comprises two units as well as tends to be made use of in bigger spaces. Having 2 different systems indicates they can be larger and also have a higher capacity. They are wall surface placed and do not require a window opening, with the interior system containing the evaporator which cools the room. The compressor remains in the outdoors system meaning the loud element gets on an external wall.

Split A/C vs Window AC Which is Finest for You?

There are a variety of aspects which illustrate what is the distinction between split air conditioning and also window a/c. Contrasting the pros and cons of these different factors can assist a person determine which air conditioning system to acquire to match their needs.

Layout and Place

The appearance of the interior areas of a house is very important. While a home window air conditioning often tends to be white in colour, there is a selection of designs as well as colours offered for a split air conditioner. Besides the aesthetics, the area dimension ought to be absorbed to account as well. A home window air conditioner is offered approximately a two-ton capacity as well as has a tendency to be picked for smaller space sizes. If there is not a vent in the wall for a window air conditioning and also you would rather not utilize a window opening, then a split a/c might be the far better alternative.

Setup

There is even more adaptability in setting up a split air conditioning, although they do require expert installment and for that reason an additional price is involved. Setting up a window a/c is easier as well as you do not have any type of extra charges to think about. Being portable they are likewise easy to remove and also take with you from one place to another. Although the split air conditioning does not also require a home window, they will certainly require piping to attach the interior and outside components.

Rate and Running Prices

A split a/c is more expensive than a home window air conditioner, possibly approximately twice as much. Budget is always a factor to consider with any kind of item, however the corresponding costs will certainly need to be taken into consideration in addition to the high quality of the system and viability to the location it will certainly be set up. The small style of the window ac makes it relatively low upkeep, whereas the split air conditioning system will need a routine servicing and the outside unit will need shielding in the winter season.

Darren Winton is a blogger presently associated to MS Air Conditioning Sydney  the reputed firm  for reliable ducted air conditioning in Sydney. MS Air Conditioning has its business address located at 165 Eldridge Rd Condell Park, NSW 2200, Australia   and Phone: (02) 9786 1822 Website: https://airconditioningsydney.ranklocal.com.au