#Reactive Glasses

[partygadgetstudio]

Buy Rave Party Voice Reactive Glasses

Buy Rave Party Voice Reactive Glasses elevate your rave experience with these LED glasses sync dazzling light displays to music and sound. A must-have for festivals.

[chimerical-creations]

Mystery Skulls Animated glitter jar, sandblasted with the MSA skull emblem and filled with pink glitter and glow powder in mineral oil.

[Video description: Small glass jar with black plastic screw-top lid, held between thumb and index finger. Size of jar is approximately 3.5cm total height and 1.5cm in diameter. The outer surface is sandblasted with two Mystery Skulls Animated skull emblems, on opposite sides of the jar. The jar is filled with a mix of pink glitter and glow powder suspended in clear mineral oil. First part of the video is a slow turnaround of the jar, showing off the sandblasted parts. The glitter and glow powder has settled to the bottom of the jar.

Second part of the video shows the jar being flipped and twisted around to get the the glitter and glow powder cascading down and swirling around. Third part of the video is the same twirling-about thing but in the dark, to show off the pink glow. End description.]

[the-princess-and-the-admiral]

Actually can’t cope with Anne wearing her sunglasses inside at the IOC🤣😎

[river--ghost]

alr i’ve had enough. reddit sucks. algorithms suck. fuck that shit i’m muting all communities for my favorite fandoms. reddit is for dolls only now. there’s no drama in the doll community.

….

maybe i should mute the bjd community too. r/dolls only. no witch hunters there.

only monster high customs and nendolls pls

[bunkernine]

Jason being the dumbest person in tlh is the funniest thing ever because how did he just say "i think im supposed to be the leader of the 7... I'm worried piper... 😫" And leo and piper seriously hyped him up trying to support him and saying he's fine like they hadn't watch him continuously get his ass kicked and risk his life for the dumbest things for the past couple of days. he must've been so cute to them cuz that's wild. u know they shouldve just locked eyes and then go, "hey jason, we need to talk...." Even funnier that they STILL hyped him up when in the next books he was still unsure about it and everything was going to shit and they had their own problems to deal with, like those really are best friends. They know ur probably about to take the biggest L of your LIFE but they're still saying ur a winner. Love

[retroriotvtg]

you glow girl

[livicraft]

A beautiful Cream, Silver & Turquoise Reactive Glass Pendant

Handmade cream, silver and turquoise blue reactive glass pendant with cream cord.

This has been created by fusing cream, turquoise blue glass with a silver foil and when fired in the kiln a chemical reaction occurs creating a beautiful design.

This is a closeup view

and a view of the back, showing the .925 silver bail

[nitorvitrum]

Glow in the Dark Glass Suncatcher

This $9 glow in the dark suncatcher casts beautiful patters on nearby walls, and glows brightly at night! Through the marbles this glows and looks like the star, these suncatchers are also available in a variety of colors and customization is encouraged!

[uraniumbugz]

pairpoint green briar cup dish

made in 1980 by pairpoint glass

limited edition in association with the thornton w burgess society

[reachem07]

PCB Manufacturing Process: All You Need to Know

Creating a printed circuit board (PCB) is a systematic process that begins with meticulous design and material selection, crucial for ensuring functionality and durability. The initial steps involve the application of a thin layer of copper over a substrate material, typically a fiberglass substrate reinforced with epoxy resin and glass fiber, which provides the necessary rigidity and electrical insulation. This copper layer is then patterned to form conductive areas that will eventually carry electrical signals.

The layout design process utilizes advanced CAD software for precision, ensuring that the conductive paths and component placement areas are accurately defined. Once the design is finalized, it's transferred onto the PCB using photo reactive chemicals and UV exposure, a process known as outer layer imaging. This method allows for the precise alignment of layers and the creation of intricate circuit patterns.

After the design transfer, the excess copper is removed through a careful etching process, leaving behind the copper traces that form the circuitry. The PCB then undergoes a laminating process to apply a solder mask, a protective layer that covers the entire board while exposing the areas where components will be soldered. This solder mask application is crucial for preventing short circuits and ensuring the longevity of the PCB.

Following the application of the solder mask, a silkscreen printing process adds labels and markings to the PCB, aiding in component placement and board identification. The final step in the fabrication processes involves applying a surface finish, such as tin plating, to protect the exposed copper and ensure a reliable soldering surface. Other surface finishes like HASL (Hot Air Solder Leveling) or ENIG (Electroless Nickel Immersion Gold) are also used depending on the application requirements.

Throughout the PCB manufacturing process, precision is maintained through the use of technologies like CNC machines for accurate drilling of holes that will accommodate electronic components. Each part of the PCB fabrication process, from the initial design to the final surface finish, is critical to enhancing the PCB's electrical performance and longevity.

The final stages of assembly involve the placement of components onto the PCB, often by a contract manufacturer specializing in PCB assembly. This is followed by soldering, which can be done through various methods, to securely attach the components to the board.

Rigorous electrical tests are conducted to validate the PCB's performance, ensuring that it meets stringent quality standards before integration into electronic devices. These tests verify the integrity of the conductive paths, the correct orientation of components, and the overall functionality of the PCB.

This holistic approach underscores the importance of meticulous craftsmanship and thorough quality assurance in producing reliable PCBs that power our modern gadgets effectively. Each step, from the initial plating process to the final surface finishing, contributes to enhancing the PCB's electrical performance and longevity, making it a vital component in the electronics industry.

To read more please visit: 

Reachemical chemicals

reachemchemicals@gmail.com

16479857177

600 Matheson Blvd W Unit 5, Mississauga, Ontario ,ON L5R 4C1.

[chimerical-creations]

Decepticon glitter jar. Sandblasted the Decepticon insignia into the outside surface of the jar, then shoved a bunch of different types of purple glitter and some violet glow powder into it, filled it with mineral oil so everything swirls around all nice, and glued the lid on.

[Video description since I can't add an image description to the video post itself: Small glass jar with black plastic lid, approximately 3.5cm tall and 1.5cm in diameter, held between thumb and forefinger. The outside of the jar is sandblasted with the Decepticon insignia, and filled with a mix of violet glitter and glow powder suspended in mineral oil. The first fifteen seconds of video are of the jar being rotated left and right to show off the sandblasting.

Second part of the video is the jar being held upside down for a while to start the glitter falling, then spun and flipped to swirl the glitter and glow powder around.

Third part of the video (the final fifty-seven seconds) is the jar being moved about under UV light so the glow powder fluoresces. End description.]

[atomskdluffy]

I didn't do everything I wanted to today, but I got close enough. Most important thing was to replace the screen protector on my phone, having that crack on the side was really getting on my nerves. There was a piece missing in the kit (I got a new protector for free via warranty, but they didn't provide any of the glue application pieces so I'm glad I kept all the original stuff... or so I thought), so it was actually a much more harrowing process than it should've been, but it went off without a hitch!

[vivalasthedas]

seeing how the girls do loose for a night.

Bear has gotten quiet, but is clearly not settled after growling at the mere idea that my boy might've been in the room. To the point that i farted and she jumped like she was being attacked.