a-momento-design - Tumblr blog

[a-momento-design]

This Is My Second Year Uni Sustainability Project To Improve Rainwater Collecting System From Bio Inspired Design

[a-momento-design]

Site Plan Of A Project I Was Involved In On Mt Cook Wellington For A Second Year Project

[a-momento-design]

This Was A Project I Did In My First Year For Sustainability Course Which Looked At Improving Flats In Wellington With Mine Mainly Dealing With Heat

[a-momento-design]

This Is My Site Analysis For Mt Cook In Wellington For A Project In My Second Year That I Was Involved In.

[a-momento-design]

My History Project For Second Year Looking Into Spaces Created In A Area On Cuba Street In Wellington New Zealand

[a-momento-design]

Playing With Water And Food Colouring To Produce Spaces And Areas With In The Glass For One Of My Second Year Projects

[a-momento-design]

Site Analysis And Comparison From A Project I Was Involved With In My Second Year 

[a-momento-design]

This Is One Of My First Year Projects I Did At Victoria Uni In Wellington New Zealand. It Was to Create A Combined Space For A Site Located On Wellingtons Waterfront

[a-momento-design]

For SARC 162, P2. My Wall Structure

[a-momento-design]

For SARC 162, P2. Structure Section

[a-momento-design]

For SARC 162, P2. Final Change To Create Void. I Removed Parts Of The Wall To Produce Voids When Looking At The Wall From The Side But Not The Front.

[a-momento-design]

For SARC 162, P2. 2nd Voids Done By Lifting Up Every Second Pair Of Planks To Make A Small Gap At The Bottom And On The Top

[a-momento-design]

For SARC 162, P2. 1st Void Change. Removed The Middle Planks Producing A Arrow Shape Like The V Shapes On Te Aro

[a-momento-design]

For SARC 162, P2. Section Of My Wall In The Space

[a-momento-design]

For 162, P2. Push And Pull. Start With The Twist At The Top Pulling The Top And Pushing The Bottom Of The Planks, Then On To Pulling The Planks Into A Zigzag And The At The Bottom I Pulled Out Another Layer Top Go Behind

[a-momento-design]

SARC 162, P2. Twist Wall Pushing The Top Of The Plank And Pulling On The Bottom

[a-momento-design]

For SARC 162, P2. Wall On Site After Phase 1